B2B Inbound Error : Need Clarification
Hi All,
I would like to illustrate a particular use case for B2B Inbound Errors and if there is any workaround available to get over the problem. We are using B2B version 10.1.2
Use Case Details</strong1. Consider the scenario wherein we have a Inbound EDI File which has 100 transactions in it. B2B reads the file and automatically debatches into individual transactions and processes them separately.
2. Out of the 100 transactions in the input file, if say 5 transactions are error transactions, we have observed that all the 100 transactions error out in B2B.
3. The 95 correct transactions fail with the error "General Validation Error" and the 5 error transactions have the exact error details in the B2B Message Reports.
4. Ideally, B2B should error out only the 5 error transactions and process rest of the 95 transactions without allowing them to fail with "General Validation Error".
I am sure that most of us must have faced this error. Could someone please let me know the folllowing:
1. Is there any setting in B2B by which we can enable it to error out only the transactions which have valid errors in a single file
2. Is there any other workaround that we can take to avoid this issue.
The reason we need to have a solution for this is because in our Production B2B environment we receive inbound files from Trading Partners which have hundreds of transactions in each file.
If, even a single transaction has error, then the whole file errors out and it is quite cumbersome to browse through the B2B Message Reports to get the exact error transaction because all the correct transactions would failed with error "General Validation Error".
Please let me know the inputs.
Thanks,
Dibya
Hi Ramesh,
Thanks for the clarification and information. We have already set the parameter OneErrorAllError = true and my understanding was that if we set this parameter to TRUE, it means that if one transaction in the OUTBOUND batch errors out then the whole batch will error out.
I was not aware that it also holds true for INBOUND. Is there any other way that we can set this parameter based on direction (INBOUND or OUTBOUND).
We would like to have this parameter set for OUTBOUND and disabled for INBOUND Transactions.
Please let me know. Thanks Again.
Regards,
Dibya
Similar Messages
-
B2B Inbound Error - sender mail adapter - SMTP
Boa tarde
Estou tendo um erro quando tento ler uma caixa de e-mail via scenario B2B inbound utilizando sender adapter mail (SMTP)
estou passando as seguintes informações no adapter sender :
Transport Protocol: POP3
Message Protocol: XIPAYLOAD
URL :smtp://sepcsawi003.xxxx.xxx.
Authentication Method : Plain
USER : monit.nfe
SENHA : XXXXX
Poll interval(Min) : 1
Keep Attachments : X
namespace : http://sap.com/xi/NFE/005a
interface name : NFB2B_procNFe_OB
Segue o log extraido do comuncation Channel Monitoring :
In the Last 20 Minutes Server 0 70_34165 not initialized
Na sxmb_moni não aparece nada.
Essa configuração está correta para uso de SMTP com sender mail adapter?
Entrei na máquina do PI e executei o comando telnet sepcsawi003 25 para acessar o servidor de email.
Recebi o retorno:
Connecting To sepcsawi003...Could not open connection to the host, on port 25: Connect failed
Meu administrador me disse que as máquina PI e Email estão se conectando.
Vocês podem me ajudar?
Abs,
Sérgio SalomãBoa Tarde
Lembrando
se for Pop3 a vc tem que ter acesso a porta 110 e IMAP4 143 se não me engano por padrão
de uma olhada nesse link
http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario
não esqueça no adapter sender mail
na aba module
Processing Sequence
1 localejbs/AF_Modules/PayloadSwapBean | Local Enterprise Bean | 1
2 localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean | Local Enterprise Bean | mail
Module Configuration
1 | swap.keyName | Content-Disposition
1 | swap.keyName | Content-Description
1 | swap.keyValue | attachment; filename="MailAttachment-1.xml"
1 | swap.keyValue | MailAttachment-1
Att
Ronaldo de Moraes -
B2B Inbound error after version upgrade
Hi All,
1. We upgraded from 11.1.1.3 to 11.1.1.6.
In 11.1.1.3, for Inbound, we used B2B adapter to get the message from IP_IN_QUEUE. We created a process with receive activity and the messages were picked from the queue successfully.
In 11.1.1.6, we migrated the code without any change and while testing, we are getting the following error,
B2B Label:PCBPEL_11.1.1.6.0_GENERIC_111214.0600.1553: oracle.fabric.common.FabricInvocationException: IDeliveryService.request() invoked for one-way operation 'receive'. This method can only be used to invoke two-way operations which return an output message. Please check the WSDL which defines this operation and use the method IDeliveryService.post() to invoke a one-way operation
Do we need any configuration to be done for this ?
2. As a work around, i tried using a AQ adapter to fetch the message from IP_IN_QUEUE. But no luck, getting the following error,
BINDING.JCA-11975
AQ_INVALID_QUEUE.
Unable to obtain queue table name.
Queue does not exist or not defined correctly.
Drop and re-create queue.
Dont know whether there is problem with the queue, because outbound queue (IP_OUT_QUEUE) is working (wire messages sent to TP).
Help me in resolving this issue.
Thanks,
TerryHi Anuj,
i tried your suggestion,
Scenario 1:
When Notify Inbound Receipt Acks= false, Exception from TP reaching Queue and my exception consumer(b2berroruser) is running successfully. But when TP sends Successful ack, i dont see the message in the queue and hence my success response consumer (b2buser) is not getting executed.
Scenario 2:
When Notify Inbound Receipt Acks= true, Exception from TP reaching Queue but 2 rows getting creating,
User_data col. of the IP_QTAB,
Row1: PROD_SOAINFRA.IP_MESSAGE_TYPE('0AA0652813ADFCE80270000016D93592-1','null','TP','HostTP','Exception','Exception','1.0',3,'oracle.sql.CLOB@4528f1','null')
Row2: PROD_SOAINFRA.IP_MESSAGE_TYPE('0AA0652813ADFCE80270000016D93592-1','null','TP','HostTP','Exception','Exception','1.0',4,'oracle.sql.CLOB@e6e083','null')
At this instance both my exception consumer(b2berroruser) and response consumer(b2buser) are getting executed (weird). and as expected both the above rows are getting off from the table.
When TP sends Successful ack, its getting stagnated in the queue, my response consumer (b2buser) is not picking it up.
User_data col. of the IP_QTAB for receipt ack (which is getting stagnated): PROD_SOAINFRA.IP_MESSAGE_TYPE('0AA0652813ADFA3F75F0000016D934A1-1','null','TP','HostTP','Receipt Acknowledgment','Invoice','1.0',3,'oracle.sql.CLOB@1742edd','null')
In B2B reports i see only one response (either exception/ack) from TP for a transaction.
Thanks for your suggestions.
Terry -
Error in getting content of edi 834 file - B2B inbound
Hello B2B Guru,
I am frustrated about this error. It seems so straightforward but just not working.
B2B 834 inbound file is processed successfully. After that, SOA BEPL need to post-process the 834 xml file generated by B2B. I need to check the 834 xml content to determine what to do next. The 834 xml is populate in Receive1_Consume_Message_InputVariable payload correctly. But I just can't get the following "assign" work. It is empty. I got selection exception.
<assign name="Assign1">
<copy>
<from>$Receive1_Consume_Message_InputVariable.body/ns4:Loop-1000A/ns4:Segment-N1/ns4:Element-67</from>
<to>$g_test</to>
</copy>
</assign>
I guess may namespace matters, but I can't figure out. Is there anyone have similar experience?
Thank you very much in advance,
AlenaHi Anuj,
Thank you very much for your help. Yes, it is the name space issue. I have changed xsd name space due to name convention but didn't update B2B configuration. So what I need to do is to update B2B document definition with the same xsd in SOA, right?
Your ongoing support has been dramatically affected our development phase. Appreciated.
Alena
CGI
Edited by: Alena on Jun 1, 2013 12:59 PM -
Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error
B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
KenKen,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work. -
B2B-50037: B2B inbound message processing error
We are trying to implement B2B with Customer EDI X12 850 Inbound with SOA
Application server Version 11.1.1.4.0 (weblogic)
Hitting the following error in the logs
MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/8504010Viterra.ecs"
Was successful in overcoming all the usual obstacles of finding the TP, Document Type, protocol etc...However hitting the above error. 8504010Viterra.ecs is a custom spec builder document we created and "8504010Viterra.ecs" was browsed from the windows PC into the Document Type B2B set up. I am willing to use a seeded ecs file but do not know how to find one for X12 850 4010 version....?
Went through one SR that asks you upload a group ECS file but that did not help in our case....Following was the SR
"B2B-50037 B2B INBOUND MESSAGE PROCESSING" Error with EDIX12 And DEF 830 VER 200\0 [ID 1357136.1]
Please help
Now at the agreement level, if we set the translate to No and Validate to No then B2B completes normally but we do want B2B to translate the file so that we can get it in XML form for us to transform and process it in BPEL
Any help or hint is really appreciated!Anuj
THANK YOU SO MUCH!!! I cannot thank you enough for this
I was playing around so much with the document type, the protocol version etc. that i must have inadvertently messed up the repository. I took the export of the data as you suggested, purged the design repository and reimported the zip. I also had to restart the server since the ftp was not kicking in...& wholla! the message got translated into XML and went into the queue
Thanks again
Gopal Iyer
Edited by: ghiyer on Nov 10, 2011 10:07 AM -
B2B-50037: B2B inbound message processing error java.lang.NullPointerException
Can anyone help me with this problem.
I'm new here.
Oracle SOA Server version 11.1.1.6.0
Got this error message after I put Ignore Correlation true.
diagnostic.log:
[2013-08-12T14:05:26.668+02:00] [MS_KETEN_SOA_01] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Engine: processIncomingMessageImpl: Message id = 0A253556140726AA60A000003E11ADD0-1 FromParty = JD0021_OTA Doctype = ScanDocumenten version = 1.0
[2013-08-12T14:05:26.712+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] [[
at oracle.tip.b2b.msgproc.Acknowledgment.createAckMsg(Acknowledgment.java:659)
at oracle.tip.b2b.msgproc.Acknowledgment.asyncOutgoingAck(Acknowledgment.java:290)
at oracle.tip.b2b.msgproc.Request.handleAck(Request.java:652)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3019)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2013-08-12T14:05:26.720+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)It is a Defect 17324828 has been created. Details for this defect maybe viewed in Oracle Support Portal , we will update you the status as soon as we have more information.
I found ,Bug 16713853 : BTMLR: IGNORE CORRELATION AS TRUE IN ADMIN COFIGURATION GIVES NULLPOINTER ERROR for this issue in 11G , As of now development team is still working to fix this , i will raise a New BUG and involve development team for this issue -
Unable to transform EDI document to XML payload in Oracle B2B inbound op
Hi,
In our current project we would be implementing Oracle B2B.So I am doing simple POC on Oracle B2B inbound operation for a EDI document for a project requirement.Facing issue if Transformation option selected in Oracle B2B console. Would really appreciate if you guys give me some pointer..
Below is short desacription of POC:
1) Created ECS file for Purchase Order(EDI_X12 Standard, 850, Version : 4010) in Spec Builder 6.6.0
2) Created corresponding XSD and dummy test EDI data file(.dat) in Spec Builder 6.6.0
3) In Oracle B2B Console, created Document Type and Document Definition
4) Created 2 Trading Partners : Our Organisation(Host) and MyPartner(Remote)
5) My Partner is Sender and Our Organisation is Receiver
6) Linked Document Type to both Trading Partners
7) Created a Listening Channel
8) Protocol of Listening Channel is Generic File
9) Mentioned Folder Path and File Type : %From PARTY%_%TO PARTY%_%DOCUMENT TYPE NAME_%DOCUMENT REVISION%.dat
10) Agrrement validated and deployed
11)Checked option Transformation for Agreement
12) In SOA Composite created a simple Asynchronous BPEL process
13) BPEL process using a B2B Adapter is subscribed to Document Type(Purchase Order) operatioon Receive and Mode Default
14) Using a simple Assiign activity to map payload
15) BPEL then inoke a File Adapter service to write sme XML payload(picked from B2B fatre EDI transformed to XML) to a file
Issue Faced:
1) B2B could make oput Sender and Receiver Trading Partners
2) B2B could make out the Agrrement
3) B2B is picking up EDI file
4) If Agreemnet has Transformation option selected, then B2B is givinng below Error:
[oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILzvC2E0Va_xLp2iW1EzqZ_0000pg,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
5) It is unable to transfer EDI payload to XML
6) Checked payload in Wire Message : still showing EDI payload
7) Due to this BPEL is facing issue since it is expecting XML payload
8) In BPEL it is givimng Error: Index Out Of bound.. I guess may be due to EDI payload
9) If transformation option unchecked in Agreement in B2B console then B2B working good but BPEl failing
Options Tried:
1) I Exported Repository,then purged design time data and Reimported and restarted Server and tested..not working
2) I also created a Parser Scehma for Blank EDI document(that option I found in Spec Builder 6.6.0==>New Document-->Parser Schema(Blank EDI Document) and then placed that Parser Schema file(ECS file) in folder :
C:\Oracle\Middleware\Weblogic\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\config\schema
and added an entry in XERegistry.xml
<Item Name="SchemaFile">${XERoot}/config/schema/Spec2</Item>
but not working..
3) Checked namespace in XSd and WSDl for BPEL,they are correct
Getting no clue how to resolve..Need help...
Thank you...Log File :(Weblogic JDK pointing to 32 bit)
[2012-01-01T01:32:01.818+05:30] [AdminServer] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILhj4XE0Va_xLp2iW1EzqZ_00002J,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc;[[
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
at com.edifecs.xengine.xeobjects.XEHelper.createN2X(Unknown Source)
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1112)
java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc;
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
at com.edifecs.xengine.xeobjects.XEHelper.createN2X(Unknown Source)
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1112)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2348)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1533)
[2012-01-01T01:32:01.834+05:30] [AdminServer] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILhj4XE0Va_xLp2iW1EzqZ_00002J,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.IndexOutOfBoundsException: Index: 0, Size: 0[[
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2746)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1533)
[2012-01-01T01:32:01.846+05:30]
]] -
BPEL Process unable to read Inbound messages from B2B Inbound IP_IN_QUEUE
Hi Greetings.
I am working on setting up trading partners at a customer place using BPEL and B2B. BPEL is 10.1.3 and B2B is 10.1.2. The previous BPEL developers developed some processes and deployed them to Development environment. B2B is also set up by them. Lets say the customer name is Pet Safe who is the host trading partner and the remote trading partner is Pet Smart. PetSmart sends Purchase Orders (850s) using EDI over Internet via AS2 connection. My B2B server has received the test PO and sent back the Functional Acknowledgement (997) to the Remote Trading partner. I can see the messages in TIP_BUSINESSMESSAGE_RT in B2B schema of the database which Oracle 10g.
There is a BPEL process called RSCProcess850. It has been developed by using JDeveloper 10g. This process has a AQ adapter configured in the source code of BPEL. It uses a managed connection factory to connect to the Adapter framework and makes a connection to the database, which in turn talks to the EIS to dequeue the messages in B2B inbound queues. This process dequeus the messages and transforms the EDI and puts the PO details into Oracle e-business Suite tables. There is another process called SendInvoice which is configured to a Data Base adapter which polls a table in the Data BAse and sends the invoice to the B2B schema by enqueing the data to OutBound queues of B2B schema. I tried creating a connection factory using Enterprize manage console for both AQ Adapter and DB Adapter but when restarted the server it is unable to load all the BPEL process because the source code of BPEL is mismathching the password. So I have deleted the connection factories that are created suing em console. These connection factories insert an entry in oc4j-ra.xml files for both AQ Adapter and DB adapter. Once I have deleted them and restarted the server all the processes are loading but the problem is the BPEL process is neither dequeueing or enqueueing the messages. There are no errors thrown in the BPEL Domain logs also. The test PO order details are not there in the staging tables of the e-business tables, which means that the BPEL process are not able to DeQ or EnQ using the adapters. How do I know whether the adapter is fetchingthe data from staging tables or not? I am nearing my deadline but unable to proceed I am stuck here. Any sort of help or approach is highly appreciated.
my e-mail Id is [email protected]
Thanks in advance
SudhakarHi,
To test whether the messgae is ENQ or DEQ u can use the sql given in thte B2B user guide.
Ritesh -
B2B Inbound File with Multiple Transactions failing
Hi ,
Problem Summary: When the inbound file is coming with multiple transactions (combination of 997 and non-997) ,
If the 997 is the FIRST transaction in file, B2B is processing only 997 and remaning transactions are getting rejected.
Where as if the 997 is the LAST transaction in file, then all the transactions are processing correclty.
SOA Version: SOA 11G (11.1.1.5).
Example 1: below sample we got two transactions, 997 and 214. here 997 is the FIRST transaction in the file.
in this case B2B is processing 997 correctly, and 214 is errored with below error message
"B2B-51507 - A data segment with 'Mandatory' status is missing. A data segment with 'Mandatory' status is missing. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. A data segment with 'Mandatory' status is missing. A data segment with 'Mandatory' status is missing.
ISA00* *00* *02*xxxx *01*1234555 *120516*1018*U*00401*000005822*0*P*:~*
GSFA*xxxx*1234555*20120516*1018*5822*X*004010~*
ST997*58220001~*
AK1SM*7159~*
AK9A*1*1*1~*
SE000004*58220001~*
GE1*5822~*
IEA1*000005822~*
ISA*00* *00* *02*xxxx *01*1234555 *120516*1018*U*00401*000005823*0*P*:~
GS*QM*xxxx*1234555*20120516*1018*5823*X*004010~
ST*214*58230001~
B10*2313813*M1213131*xxxx~
N1*SF*xxxxxx*ZZ*124~
N4*xxxxxx*AR~
LX*1~
AT7*AF*NS***20120516*1017*LT~
MS1*xxxxx*AR~
L11*01*QN~
AT8*G*L~
SE*10*58230001~
GE*1*5823~
IEA*1*000005823~
Example 2 : below sample we got two transactions, 997 and 214. here 997 is the LAST transaction in the file.
in this case B2B is processing ALL TRANSACTIONS correctly
ISA*00* *00* *02*xxxx *01*1234555 *120516*1018*U*00401*000005823*0*P*:~
GS*QM*xxxx*1234555*20120516*1018*5823*X*004010~
ST*214*58230001~
B10*2313813*M1213131*xxxx~
N1*SF*xxxxxx*ZZ*124~
N4*xxxxxx*AR~
LX*1~
AT7*AF*NS***20120516*1017*LT~
MS1*xxxxx*AR~
L11*01*QN~
AT8*G*L~
SE*10*58230001~
GE*1*5823~
IEA*1*000005823~
ISA00* *00* *02*xxxx *01*1234555 *120516*1018*U*00401*000005822*0*P*:~*
GSFA*xxxx*1234555*20120516*1018*5822*X*004010~*
ST997*58220001~*
AK1SM*7159~*
AK9A*1*1*1~*
SE000004*58220001~*
GE1*5822~*
IEA1*000005822~*
Thanks,
NaveenHi,
My name is Phil DeLaine and I work for one of Oracle's Gold Partners, TechDemocracy.
I saw your post about the B2B transaction errors you are experiencing. We have great experience with B2B and have solved very complex problems. (References available.)
Would you like to use one of our B2B expert technical resources to solve this problem and deliver your project error free and fully functional?
Please let me know if you would like to discuss what we can do for you. You can reach me anytime.
Regards,
Phil
Phil DeLaine
Sales Director - Northeast
TechDemocracy
(978) 758-3156 (Cell)
[email protected]
http://www.techdemocracy.com/
Our Successes:
1) We won the 2011 Oracle Titan Award for the Best Middleware Implementation. Our award winning solutions included SOA, IAM and BI.
2) We have been awarded with the highly prestigious Oracle ACE Director status for outstanding industry achievement and track record.
3) We sit on several Advisory Boards for Oracle Product Management (for Fusion Middleware Products).
4) We are an Oracle Center of Excellence Partner for SOA and IAM.
5) We are frequently invited to speak at a number of Oracle Customer Success forums such as Oracle's "OpenWorld".
6) We have been rated by Inc. Magazine as one of the top 10 fastest growing companies for 3 consecutive years.
7) We have won and successfully deliveried several projects at Fortune 100, 500 and 1,000 companies. (References Available) -
Dear All,
I am a beginner to Oracle B2B.
I have created an agreement to Recieve 852, Product Activity data(POS) from one of the Trading partner. This is an inbound process.
A SOA composite application is created to Recieve the data and insert into perticular columns of the database table using database adapter.
I have tested the Interface with some couple of file and it went perfect without any error. Now I have to test the interface with some other files.
This time also I am not getting any error in Business Message, Wire message and Application message but the composite application is not picked.
The log file shows : B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParserException: Start of root element expected.
Please let me know if anyone has faced this issue. it will be of great help.
Thanks,
Abhas KushwahaHello,
Just a thought, When I had the similar problem, it appeared to be a BOM (Byte order mark - Wikipedia, the free encyclopedia) in the xml file, which is the very first character in the xml file, so the file was not identified to be a valid xml file. Removing the BOM from the xml file fixed my problem, however, I did not spend much time in fixing using B2B, the vendor (sender of the file) fixed the file and started sending without BOM. So my work was easier.
The character is not visible in all XML editors, however, it was visible in JDeveloper. I used a tool to identify and remove during testing until the vendor fixed the file, the tool is called file bom detector,http://www.bryntyounce.com/filebomdetector.htm
Hope this helps,
Thanks,
Venkatesh -
Hi,
I am working on B2B Inbound flow, for that i am using Listening channel in B2B console to pick file from directory and send it to B2B adapter(receive) in SOA composite. The file was being picked by channel, after that its showing error as mentioned below.
Id AC101E6A13A8DBFE125000001649E500
Message Id AC101E6A13A8DBFE106000001649E000
Refer To Message Refer To Message
Sender Type
Sender Value
Receiver Type
Receiver Value
Sender Remote
Receiver Host
Agreement Id
Agreement
Document Type ADT_A01
Document Protocol HL7
Document Version 2.3.1
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 10/23/2012 06:41 PM
Receive Time Stamp 10/23/2012 06:41 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size 267
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id AC101E6A13A8DBFE116000001649E400
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name Generic File
Exchange Protocol Version 1.0
Interchange Control Number 12345
Group Control Number
Transaction Set Control Number
Error Code B2B-50547
Error Description Machine Info: (local-PC) Description: Agreement not found for trading partners: FromTP Remote, ToTP Host with document type ADT_A01-2.3.1-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP Remote, ToTP Host with document type ADT_A01-2.3.1-INBOUND.
I had tried in many ways to pass correct input file to get processed, but i am not sure where this agreement failing.
Please, can any one help me out of this.
Thanks in Advance,
AhamedAhamed,
Agreement not found for trading partners: FromTP Remote, ToTP Host with document type ADT_A01-2.3.1-INBOUNDAre you really sure that you have deployed (SAVE+VALIDATE+DEPLOY) an agreement between Remote and Host TP for document type ADT_A01 2.3.1 where Remote TP is sending the file to Host TP and Host TP is actually the Host trading partner in the configuration?
Regards,
Anuj -
Hello All,
In Order to better understand the channal concept in 11g , I tried creating a simple OutBound case wherein a file will be picked up from c:\temp2 folder and will be written to c:\temp1 folder.
1. Created One Generic File 1.0 Listening Channal and selected 'Internal' checkbox. Folder name = c:\temp2
2. Defined Custom--->1.0---->PurchaseOrder----->PurchaseOrderDef
And in the PurchaseOrder (Document Type) tab, in the ebMS Section, I have filled the following values...
Action Name : PurchaseOrder
Service Name : PurchaseOrder
From Role : OracleServices
To Role: MarketInc
And in the definition tab, i have given the following values...
xsd : po.xsd
Identification xpath expression : /*[local-name()='PurchaseOrder']
3. For Trading Partner 'MarketInc' i have created a channel with Generic File 1.0 protocol. Folder name= c:\temp1
4. Created an agreement for MarketInc, selected the File channel for MarketInc , selected the document definition and deployed the code. Sender is OracleServices and Receiver is MarketInc.
When I kept a file OracleServices_1234.txt in c:\temp2, it is getting picked up but B2B report is not showing anything, neither this file has been written to c:\temp1. I also could not see any message in IP_OUT_QUEUE. I also tried with MarketInc_1234.txt withot luck.
In 'Application Messgae' TAB of report section , I see record with Direction 'OUTBOUND' and State as 'MSG_COMPLETE'.
I am seeign below error message in command prompt
<Feb 13, 2012 6:40:04 PM IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Erro
r -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:365)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:
198)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1
415)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:800)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3785)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3127)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecu
tor.java:619)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:
220)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:365)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:
198)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1
415)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:800)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3785)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3127)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecu
tor.java:619)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:
220)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Transaction rollback 094FB17613576D33C9A0000020C70000
Please help me to fix and understand this.
Thanks a lot in advance...
NaveenWhen I kept a file OracleServices_1234.txt in c:\temp2, it is getting picked up but B2B report is not showing anything, neither this file has been written to c:\temp1. I also could not see any message in IP_OUT_QUEUE. I also tried with MarketInc_1234.txt withot luck.Filename is incorrect. By default Oracle B2B expects, filename in below format for outbound case -
<RemoteTPname>_<DocType>_<DocTypeRevision>_<MsgType>_<MsgID>.<AnyFileExtn>
So in your case, filename should be -
MarketInc_PurchaseOrder_1.0_1_12345.xml
You may refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/learnmore/tnb2b11g002-326857.pdf
Regards,
Anuj -
Acrobat Error - need help! - Acrobat 9 Pro
When I try to open an acrobat files my it trys to Open EVERY acrobat file on my computer and does so until I get the following message
"There was an error opening this document. The maximum number of files are already open. No other files can be opened or printed until some are closed"
Then I have to force quit.
This just started happending a few months ago
I am on a Mac OSX
I need help! Any suggestions?
DebbieI have a 10.5.8
I am not that technical so not sure what you mean about applejack etc.
Thanks for helping!
Debbie
Date: Sat, 10 Apr 2010 13:03:28 -0600
From: [email protected]
To: [email protected]
Subject: Acrobat Error - need help! - Acrobat 9 Pro
What version of OS X? Some people have luck by clearing their caches. This can be done with Applejack in 10.5. Onyx will work in SL.
> -
B2B-51507 Error : Incomplete Internal-Properties structure.
Hi,
I send 997 AS2 by manual. And get below error.
B2B-51507 Error : Incomplete Internal-Properties structure.
ERROR_LEVEL_COLLABORATION
ERROR Error Brief : XEngine error.
below is 997 xml .
<?xml version="1.0" encoding="UTF-8"?><Transaction-997 xmlns="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49 guideline.xsd" XDataVersion="1.0" Standard="X12" Version="V5010" CreatedDate="2012-08-05T04:41:46" CreatedBy="XEngine_4016" GUID="{29D665AA-E4A3-41B5-A60A-8CE56C349249}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00501</Lookup><Lookup Name="InterchangeReceiverID">6111470100 </Lookup><Lookup Name="InterchangeReceiverQual">08</Lookup><Lookup Name="InterchangeSenderID">Sinotrans </Lookup><Lookup Name="InterchangeSenderQual">02</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x2a</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">0000000000</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">^</Property><Property Name="InterchangeControlVersion">00501</Property><Property Name="InterchangeDate">120804</Property><Property Name="InterchangeReceiverID">6111470100 </Property><Property Name="InterchangeReceiverQual">08</Property><Property Name="InterchangeSecurityInfo">0000000000</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">Sinotrans </Property><Property Name="InterchangeSenderQual">02</Property><Property Name="InterchangeTime">2259</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="RepeatingSeparator">0x5e</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ISA><Element-I01>00</Element-I01><Element-I02>0000000000</Element-I02><Element-I03>00</Element-I03><Element-I04>0000000000</Element-I04><Element-I05>02</Element-I05><Element-I06>Sinotrans </Element-I06><Element-I05_1>08</Element-I05_1><Element-I07>6111470100 </Element-I07><Element-I08>120804</Element-I08><Element-I09>2259</Element-I09><Element-I65>^</Element-I65><Element-I11>00501</Element-I11><Element-I12>000000001</Element-I12><Element-I13>0</Element-I13><Element-I14>I</Element-I14><Element-I15>\</Element-I15></Segment-ISA><Segment-GS><Element-479>FA</Element-479><Element-142>Sinotrans</Element-142><Element-124>6111470100</Element-124><Element-373>20120805</Element-373><Element-337>0437</Element-337><Element-28>1</Element-28><Element-455>T</Element-455><Element-480>005010</Element-480></Segment-GS><Segment-ST><Element-143>997</Element-143><Element-329>0001</Element-329><Element-1705>001</Element-1705></Segment-ST><Segment-AK1><Element-479_1>AA</Element-479_1><Element-28_1>98463053</Element-28_1><Element-480_1>001000</Element-480_1></Segment-AK1><Loop-AK2><Segment-AK2><Element-143>100</Element-143><Element-329>Transacti</Element-329><Element-1705>001</Element-1705></Segment-AK2><Loop-AK3><Segment-AK3><Element-721>SEG</Element-721><Element-719>59981514</Element-719><Element-447>Loop</Element-447><Element-720>1</Element-720></Segment-AK3><Segment-AK4><Composite-C030><Element-722>16</Element-722><Element-1528>9</Element-1528><Element-1686>21</Element-1686></Composite-C030><Element-725>16</Element-725><Element-723>1</Element-723><Element-724>Copy of Bad Data Element</Element-724></Segment-AK4></Loop-AK3><Segment-AK5><Element-717>A</Element-717><Element-718>1</Element-718><Element-718_1>1</Element-718_1><Element-718_2>1</Element-718_2><Element-718_3>1</Element-718_3><Element-718_4>1</Element-718_4></Segment-AK5></Loop-AK2><Segment-AK9><Element-715>A</Element-715><Element-97>208</Element-97><Element-123>52742</Element-123><Element-2>6</Element-2><Element-716>1</Element-716><Element-716_1>1</Element-716_1><Element-716_2>1</Element-716_2><Element-716_3>1</Element-716_3><Element-716_4>1</Element-716_4></Segment-AK9><Segment-SE><Element-96>8</Element-96><Element-329>0001</Element-329></Segment-SE><Segment-GE><Element-97_1>1</Element-97_1><Element-28>1</Element-28></Segment-GE><Segment-IEA><Element-I16>1</Element-I16><Element-I12>000000001</Element-I12></Segment-IEA></Transaction-997>
Thank you very much!
wanggangPlease try without internal properties.
<?xml version="1.0" encoding="UTF-8"?><Transaction-997 xmlns="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49 guideline.xsd" XDataVersion="1.0" Standard="X12" Version="V5010" CreatedDate="2012-08-05T04:41:46" CreatedBy="XEngine_4016" GUID="{29D665AA-E4A3-41B5-A60A-8CE56C349249}"><Segment-ISA><Element-I01>00</Element-I01><Element-I02>0000000000</Element-I02><Element-I03>00</Element-I03><Element-I04>0000000000</Element-I04><Element-I05>02</Element-I05><Element-I06>Sinotrans </Element-I06><Element-I05_1>08</Element-I05_1><Element-I07>6111470100 </Element-I07><Element-I08>120804</Element-I08><Element-I09>2259</Element-I09><Element-I65>^</Element-I65><Element-I11>00501</Element-I11><Element-I12>000000001</Element-I12><Element-I13>0</Element-I13><Element-I14>I</Element-I14><Element-I15>\</Element-I15></Segment-ISA><Segment-GS><Element-479>FA</Element-479><Element-142>Sinotrans</Element-142><Element-124>6111470100</Element-124><Element-373>20120805</Element-373><Element-337>0437</Element-337><Element-28>1</Element-28><Element-455>T</Element-455><Element-480>005010</Element-480></Segment-GS><Segment-ST><Element-143>997</Element-143><Element-329>0001</Element-329><Element-1705>001</Element-1705></Segment-ST><Segment-AK1><Element-479_1>AA</Element-479_1><Element-28_1>98463053</Element-28_1><Element-480_1>001000</Element-480_1></Segment-AK1><Loop-AK2><Segment-AK2><Element-143>100</Element-143><Element-329>Transacti</Element-329><Element-1705>001</Element-1705></Segment-AK2><Loop-AK3><Segment-AK3><Element-721>SEG</Element-721><Element-719>59981514</Element-719><Element-447>Loop</Element-447><Element-720>1</Element-720></Segment-AK3><Segment-AK4><Composite-C030><Element-722>16</Element-722><Element-1528>9</Element-1528><Element-1686>21</Element-1686></Composite-C030><Element-725>16</Element-725><Element-723>1</Element-723><Element-724>Copy of Bad Data Element</Element-724></Segment-AK4></Loop-AK3><Segment-AK5><Element-717>A</Element-717><Element-718>1</Element-718><Element-718_1>1</Element-718_1><Element-718_2>1</Element-718_2><Element-718_3>1</Element-718_3><Element-718_4>1</Element-718_4></Segment-AK5></Loop-AK2><Segment-AK9><Element-715>A</Element-715><Element-97>208</Element-97><Element-123>52742</Element-123><Element-2>6</Element-2><Element-716>1</Element-716><Element-716_1>1</Element-716_1><Element-716_2>1</Element-716_2><Element-716_3>1</Element-716_3><Element-716_4>1</Element-716_4></Segment-AK9><Segment-SE><Element-96>8</Element-96><Element-329>0001</Element-329></Segment-SE><Segment-GE><Element-97_1>1</Element-97_1><Element-28>1</Element-28></Segment-GE><Segment-IEA><Element-I16>1</Element-I16><Element-I12>000000001</Element-I12></Segment-IEA></Transaction-997>
Regards,
Anuj
Maybe you are looking for
-
E-Rec Reference Code in the Publication tab should not appear after enddate
hi, There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn
-
Labview 9.0: Error 1 occurred at Write To Measurement File
Hi Our University recently got the latest version of Labview (9.0 32-bit) which I installed today.The labview file I am using (my6008v6.vi) used to work fine with the older version (8.5 i think). My write-to-file VI is enabled at certain time interv
-
Slow Motion Sequence is Stroby
I just edited together a slow mo sequence, with all of the images at 50%. Frame blending is on but I still get a stroby appearance - not noticible on the computer screen but very apparent on my NTSC monitor. I've created slow mo before (with the same
-
How to create new actions ? in the interaction record screen
Hi all, I'm working with the IC web client. In the interaction record screen the is a link to actions. But how to create new actions ? schedule actions ? Component "ICCMP_BT_INR" View "InrHeaderViewSet"
-
Commitment Items and Cash management in Projects
Hi Gurus, Please tell me how can i do the cash management project wise. What needs to be configure and what is the business process??? How can we do cost planning and budgeting in projects??? Please revert asap. Thank You