B2B not creating instance in SOA
hello,
I am not able to create instance in my SOA composite. B2B console shows me the message as below:-
***Document Type InvoiceUBL2***
***Document Definition InvoiceUBL2_def***
***Document Protocol Name InvoiceUBL2***
***Document Protocol Version InvoiceUBL2***
***Refer To Application Message Id Refer To Application Message Id***
***App Conversation Id ***
***App Message property {ACTION_NAME=null, Protocol Version=1.0, Recepient=b2buser, Endpoint=aq://IP_IN_QUEUE, Protocol=AQ}***
***Direction INBOUND***
***State MSG_COMPLETE***
The irony is, that all other interface which work on the same console and the same configuration are running successfully. Therefore, i dont understand where the problem lies exactly. I am the only one who is using that particular B2B defination. Please help me solve this issue.
Regards,
Shreya.
Hello Anuj/Venkatesh,
When i try to read the file using the Invoice UBL-2 standard Xsd, SOA cannot create an instance. So i tried reading it with the opaque schema and that create an instance in SOA. But the data comes in 64 bit binary. Is it possible that i can remove the BOM character before it reaches SOA i.e using callouts in the B2B console? because parsing 64bit binary into XML format is posing a problem now because the Invoice UBL-2 xsd comes with a lot of reference xsds. Kindly help.
Anuj- Yes, when I manually change the encoding of the file to ANSI or UTF-8 without BOM via Notepad++, an instance is created in SOA.
Regards,
Shreya.
Edited by: 918008 on Dec 29, 2012 8:37 AM
Edited by: 918008 on Dec 29, 2012 8:39 AM
Similar Messages
-
Drvconfig not creating instances for my pseudo-driver
Hi,
I have written a pseudo driver which intercepts writes to the disk.
My problem is - my driver should create new minor nodes for the new disks being added without bringing the the driver down and installing it again. Bringing the driver down and installing it works perfect, but i will be losing the data.
Observation:-
when i do drvconfig on solaris.....it is triggering SD(SCSI disk driver) to create device special files.
if SD has already created device special files for disk1, then when i add another disk(daisy chain)....i did drvconfig....which again triggers SD to create device special files for this new disk. This is absolutely perfect.
But drvconfig is not triggering my pseudo driver to create new instances for new disks.
drvconfig is triggering my pseudo driver only if it is not added by add_drv i.e. pseudo driver is not installed. Once my driver is installed, then drvconfig is not at all triggering pseudo driver but triggers SD.
I need to fix this customer requirement of adding new disks when pseudo driver is installed....my pseudo driver should see dynamically added new disks.
One more question.....is there a way to trigger kernel to call pseudo drivers attach entry point? this will also help me to solve my problem.
I tried to create minor nodes thru the ioctl entry point, but my driver is dumping.
Please help me and let me know ASAP. This would be a great help to me.
thanks
regards
kiran
925-875-8157(w)thanks Jienhua...!!
i tried it already 2days ago....but i am getting an error "missing parent or class"....
When drvconfig is triggering SD, why not pseudo driver?
Can you suggest any way to create minor nodes for the new disks? Is there a way to cause kernel to call attach routine ?
Please take a look at this and let me know.
instances_per_driver=256
driver_count = 4
driver_name1= �sd�
driver_name2= �ssd�
driver_name3=�dad�
driver_name4=�rdriver�
instance_bits4=10
instance_shift4=4
name=�wi� parent=�pseudo� instance=0; -
Could not create JVM Virtual machine(While starting soa managed server)?
Hi,
While starting managed server I am getting following errors:
Could not commit 1048576KB heap memory at 0x0000000004790000.
Could not create JVM Virtual machine.
After above error SOA managed server is to be down.
Please help me that how can i resolve this issue.
Thanks
DharmHi Dharm,
This is typically printed when we are short on memory.
What is OS version and JDK being using here ? 32bit or 64bit ?
Current Xms and Xmx values ?
Thanks,
Sharmela -
Parent Instance creating many child instances in SOA-INFRA
Hi,
We have deleted a parent instance from SOA-INFRA database.Even after deletion it keeps on creating child instances. How to identify all the child instances of the parent instance in SOA-INFRA schema . Also, we searched a lot but were unable to get much details about SOA_INFRA schema.
Please suggest and tell us the reasoning behind why many child instances getting created? Any suggestions will help us.
Thanks in advance.It just provides the table names but doesnt provide information like which table is referred which table. Also, can anyone let me know how the instance id(when a request is submitted) is created in SOA-INFRA schema and how it is used other tables because we still see the child instances is getting created from the parent instance.
Any help will be appreciated.
Thanks. -
Error while installing SOA, "Could not create java virtual machine"
I am trying to install SOA latest release, but am getting an error stating "Could not create java virtual machine" and just that. No log, nothing. Could anybody help me out on this?
Is JRE installed on your machine?
If yes it may get corrupted, try to remove and reinstall jre again. Then try to install SOA. -
hi,
firstly, i should introduce what i am doing now.
I want to write a Jeanbean, which can invoke 2 web services.
I found in tomcat, when I submitted the parameters from a web page form, there was Internal Server Error.
The problem is I can not created an instance of org.apache.axis.client.Service, or an instance of org.apache.axis.client.AxisClient.
But very stange, I tried to create an instance of org.apache.axis.client.Transport, which should exist in the same package with Service and AxisClien, there was no exceptions.
can anyone give me some hints?Is it a "class not found" error? Have you tried viewing the jar file that you think org.apache.axis.client.Service is in to be sure that it's really in there?
jar tvf <filename> -
Instance not created in process chain
Hi,
we running a process chain in that 1 local chain failing due to instance not creating.
in job log it was showing "perivous job not at finished" But pervious chain completed.
it is the meta chain.
how to trigger next chain?
thnaksthnak
-
SQL Server 2014 Express LocalDB automatic instance is not created
I have just installed SQL Server 2014 Developer Edition and noticed that there is no v12.0 automatic instance. Instead, there is MSSQLLocalDB automatic instance. Is this a bug?
Hi Alex,
According to your description, we need to verify if you install SQL Server 2014 Developer edition and SQL Server 2014 express edition. LocalDB is only just a lightweight version of Express version that has all its programmability features. If you install
SQL Server 2014 express LocalDB, please ensure you install automatic instances of LocalDB and not named instance of LocalDB. Usually,
when the target machine has the specified version of LocalDB installed, the automatic instance of
LocalDB for that version is available on the target machine as well. The name for the automatic instance is a single v character followed by the
LocalDB release version number in the format
xx.x. For example, v12.0 represents SQL Server 2014. For more information, see:
http://msdn.microsoft.com/en-us/library/hh510202(v=sql.120).aspx
If the issue still exists after checking the above suggestions, you can submit a feedback to Microsoft such issues, I would recommend to submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback. This connect site will serve as a connecting point between you and Microsoft, and ultimately the large community for you and Microsoft to
interact with. Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
SOAP version for B2B HTTP inbound message in SOA Suite 11.1.1.7
Is there a way to find out the SOAP version supported by B2B HTTP inbound message in SOA Suite 11.1.1.7? Has there been a upgrade of SOAP version to SOAP 1.2?
The reason behind this assumption is because we are facing following error when an external service posts an XML message enclosed in SOAP envelope (SOAP 1.1) to B2B Sync Receiver Servlet:
Mime Header Content-Type: text/xml requires SOAP envelope namespace
Since SOAP headers are already added in the message we are not expecing to face such issue. As per my understanding this issue maybe seen when there is a SOAP version mismatch.
Moreover, this issue is not seen when this external service posts the same SOAP message to B2B Sync Receiver of SOA suite 11.1.1.6.
Any help would be highly appreciated.
Thanks,I resolved the issue by myself, The connection factory which I was referring was duplicated. Hence messages were not dequeueing.
I would be able to found the issues by creating a similar test case scenario.
Cheers,
B -
AQ Adapter error: Could not create XML document carrying AQ Headers
I'm having problem with the AQ adapter (ADT) sample that comes with the SOA 10g install.
I am running 10.1.3.4 on XP, using Oracle XE.
I can use the sample sql script to enque and deque. However, when I deploy the sample ADT (BPEL project), I see errors in the opmn log. The BPEL instance is not even created.
I see another post with similar question, Re: Debugging BPEL when using Oracle AQ but no answer.
Any help is greatly appreciated. Thx!
----------------- err log --------------
<2009-07-15 00:04:31,656> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<2009-07-15 00:04:32,031> <INFO> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ctor: Initialized MessageReader for queue CUSTOMER_IN_QUEUE, consumer = null)
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ReadMessage: Could not create XML document carrying AQ Headers: [Ljava.lang.StackTraceElement;@e7af3a
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound>
java.lang.Exception: java.lang.NullPointerException
at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:750)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:261)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseToCache(StatementBCELProxy.java:67)
at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseTarget(StatementBCELProxy.java:79)
at oracle.oc4j.sql.proxy.SQLBCELProxy.oc4j_close(SQLBCELProxy.java:95)
at oracle.oc4j.sql.proxy.StatementBCELProxy.close(StatementBCELProxy.java:92)
at oracle.AQ.AQOracleQueue.destroyStmt(AQOracleQueue.java:3099)
at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1793)
at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1307)
at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:485)
... 4 more
<2009-07-15 00:12:16,203> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.as.j2ee.transaction.tpc.ProtocolErrorWithNotification in JCA-work-instance:AQ Adapter-0 - cause: Branch [oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740, Branch Id 7c.e5.55.76.00.00.00.00.00.00.00.00.00.00.00.01), oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, state={PREPARED}, exception error code=] in transaction Global Transaction Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740), type=orabpel, state=COMMITTING, time in completion or recovering=0)
....thanks for the reply. I did look into that post, and couldn't found where to set that option either.
However, my PC was rebooted a few times today (I didn't change anything with BPEL), and I just re-ran the test now, that problem disappeared! It is working fine now. -
Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic. -
Hi,
I am sending IDOC from XI to R/3 using IDOC Adapter.
When I send around 2000 documents(2000 idoc are created in R/3)it works fine and I can see Idoc created in WE02.
But When I send more then 6000 documents,IDOCS are not created in R/3.But I can see in idx5 in XI 6000 outbound idocs.
Thanks in advance.
Rekha.Have you checked whether the tRFC queue is full and creating with time delay ?
Try to increase remote user login parameter in the instance profile.
regards
Shravan -
Secure Store Service Application takes a lot of time and does not create the database
Hi everybody,
I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
I have restarted the secure store service and IIS for many times and even the server itself.
I'm wondering if anybody has had this issue because I couldn't find anything on the web.
Thanks,
EdwinAlex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
it starts with:
11/13/2013 15:19:55.52 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj6 High
Creating Secure Store Service Application 'Secure Store Service Application'.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj9 Medium
Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk0 Medium
Saving "database object" 'SP_SecureStore' in the config db.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.83 w3wp.exe (0x0944)
0x0DB4
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)
0x02B0
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wl Verbose
Tracker not started because call not made from Service Host.
11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)
0x1B88 Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
Finally it says:
11/13/2013 15:19:55.90 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk9 High
Secure Store Service Application 'Secure Store Service Application' created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
How to Create one more SOA-INFRA under the same domain in weblogic server
Hi All,
Can anybody can guide how to create one more soa-infra under the same domain. In order to maintain my composites to be deployed into
different domains, I need to create one more soa-infra and deployed all the composites under that one.
Please let me know if any demo is available for this activity to be gets completed.
Regards,
CHHi Vijay,
There are several composites which needs to be deployed and maintained in the server. So, we I'm trying to maintian
by deploying composites into 3 different SOA-INFRA's so if one is not accessible, we can look into it and others can access the
composites from another SOA-INFRA instead of creating domains.
Let me know what will be feasible way to perform this activity.
Regards,
CH
Maybe you are looking for
-
Oracle Application is not working on IE7
Hi All, I have updated my IE6 with IE7 and when i am trying to run oracle application, i successfully logon but When application try to run applet that time IE terminated by application. and got this mkessage. Problem caused by Java This problem was
-
Credit Memo Assignment in COPA
Dear SAP Experts, I am serving in electronics company.we give incentives (Discounts) to our customer. The procedure is we create credit memo with reference to material in SD and after checking of Memo ,credit note is posted. kindly note that these di
-
Trying to Save a PSD file as JPEG using the script from the Adobe scripting documentation. The following code opens the standard Save As dialog box rather than simply saving the file, I am missing something ... but what??! tell application "Adobe Pho
-
Junk charecter in SQL Server 2000 varchar
Hi all, My application works with both SQL Server as well as Oracle.For SQL Server 2000 to create primary key in to one table i am using UuidCreate() function which returns unique key of length 32.But in case of SQL Server 2000, it some times accepts
-
IDOC trigger using Z change pointers for standard SAP table
For IDOC trigger, is using custom change pointers on standard SAP master data tables, a good idea? A seasoned abaper told me "it will mess with the standard" and further told to go with scheduled job. So, for example, say that my data for table T001K