B2B outbound Channel Configuration - EMail - Attachment Name and Extension

Hello,
I have configured an outbound channel to send the payload (xml) as an attachment. When I leave the "Subject" field in the Channel configuration blank, the attachment file name looks like this,"HostPartnerName_TradingPartnerName_DocumentType" without the file extension. If I supply the "Subject" field with the value, the file name gets replaced with the subject and the file extension still is missing.
I would like to receive a file name in a format like "batch_b2b.messageId.xml". The property b2b.messageId gets the value from the Mediator. The composite that passes the information like the b2b properties has been made generic to handle different Trading Partners, so for a channel that uses SFTP, I have used the Filename format and supplied the value as "batch_%MSG_ID%.xml". Is there a way I can do the same for Email channel?
Thanks,
Venkatesh

Hi Venkatesh,
Attachment name can be set from the middleware using below header (as per the mode of integration used) -
1. For AQ mode of integration, use actionName -
actionName=ATTACHMENT_NAME:test.txt
2. For JMS mode of integration use custom JMS header - jca.jms.JMSProperty.ATTACHMENT_NAME to populate the name.
3. For fabric (default) mode of integration, use b2b.attachmentName header
Regards,
Anuj

Similar Messages

  • Gmail access through Mail : Attachment name and extension terminated

    When I try to send an attachment through Gmail using Mail, if the attachment names have more than one word with spaces in them, the entire name is terminated to the first few letters before the space and the file extension is lost too; so the recipients end up having incomplete file names without any extension. The files transfer perfectly and once the extensions are put in, they open without a problem. Receiving attachments where the names have spaces etc. is not a problem at my end though.
    Any idea what I should tweak?
    Thanks.

    All updates are installed regularly, so I am indeed at the newest version of all available software. I just haven't updated my signature here.
    And the name of the attachment is mangled only when I use the client to send an attachment to any other Gmail account ( both Windows or Mac, accessed either through a client or directly at the receiving end). The same email cc'd to my school address shows the entire file name. And if I send the email through Gmail directly, then it is fine too, as I mentioned.
    Message was edited by: Deep Blue to change the OS version.

  • Get Attachment Name and from address of mail in bpel process

    Hi All,
    I am using UMS Adapter to poll email server and  getting the attachment and saving it to local disk.
    In Payload from UMS adapter  i am getting href of the attachment  but I am not able to figure out as to how to get Attachment Name and From Address of a mail in my Bpel process.
    please guide me in getting them .
    Thanks in Advance
    Divyanshu

    1. Double click on your composite receive activity.
    2. Go to Properties tab in your receive activity.
    3. Click "+".
    4. Window that pops up,scroll down and select "jca.ums.from" and store it in some variable say fromAddress (Make sure before adding this property u create fromAddress variable of string data type).
    5. Click OK.
    6. In the same way add property for "jca.ums.msg.content-description" from drop down and assing it to some variable.
    you are good to go.
    Hope this helps.
    Regards,
    Karan
    Oracle Fusion Middleware Blog

  • My friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled beca

    my friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled because its been long time not used... what can i do to activate my iphone???
    iPhone 4, iOS 7.1

    Call Apple and ask for Account Security.

  • Name and extension network volume - problem

    Hi all,
    I am 10.7.5 and when I get my network volumes the system I added an extension to the volume name!
    example:
    volume name: Music
    in name and extension: Music-2
    Why am I adding -2??
    and how to no longer be
    Thank you for your help

    All updates are installed regularly, so I am indeed at the newest version of all available software. I just haven't updated my signature here.
    And the name of the attachment is mangled only when I use the client to send an attachment to any other Gmail account ( both Windows or Mac, accessed either through a client or directly at the receiving end). The same email cc'd to my school address shows the entire file name. And if I send the email through Gmail directly, then it is fine too, as I mentioned.
    Message was edited by: Deep Blue to change the OS version.

  • DMS - file name and extension

    Hi everybody,
    I will appreciate if somebody could tell me how to read the file name and extension of already uploaded to DMS document (a function module will be best but name of db table is ok too). Is this information stored in SAP DB at all?
    Thanks
    Ogniana

    Check
    http://help.sap.com/saphelp_erp2004/helpdata/en/c6/893d55449311d1893e0000e8323c4f/content.htm
    Regards,
    Santosh

  • Changing file multiple file names and extensions

    hi all
    i have just converted a couple of files with some software, but it hasnt put the file extension on, does anyone know of a way to automatically change them, they are already mp4 files but missing the .mp4 on the name part, can anyone help me out to change it without having to manually type it into every single file as that will take me ages now, but i do know for next time when i use this software.
    adam

    Just a warning: are you sure the extension is missing ? in some cases the extension is in the file name but it is hidden (it's used by the system and is exported but you don't see it in the finder).
    In order to check it, in the Finder you can select the file icon, and use the Get Info command (cmd-I): when existing the extension can be read in the "Name and Extension" field, but if the Hide Extension option is set, that extension for that file will be hidden in the finder windows.
    Piero

  • Email attachment name in sender mail adapter to the receiver file adapter

    HI ,
    Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
    Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
    I assume , i need to do following steps :Please confirm.
    1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
    2. select ASMA option in advanced tab in sender mail adapter
    3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
    4. Also select file name option in ASMA in sender mail adapter
    Thanks,
    Vamsi

    Hi Vamsi,
    your scenario is also described here: Re: sender mail adapter - attachment name
    If you use the Module getAttachmentName, which is described here,
    http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
    your scenario should work as you described it.
    You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
    Fileadapter (http://sap.com/xi/XI/System/File/FileName).
    regards,
    Daniel

  • Read Email Attachment Document and Save it in DMS

    Hi
    I  have developd a zFM for reading the email attachment and storing it in SAP.(CV01N)
    using the FM for SO_DOCUMENT_READ_API1(Read attachement)  CVAPI_DOC_CHECKIN(Save Document) FM for save it in SAP.
    After reading the attachemtn am getting Hexa decimal Values and i have convert into binary.
    But the output is showing can't open the file.
    How to solve this?
    CALL FUNCTION 'SO_DOCUMENT_READ_API1'
              EXPORTING
                document_id                = lv_doc_id
              IMPORTING
                document_data              = lw_doc_data
              TABLES
                object_content             = lt_objcontent
                contents_hex               = lt_contents_hex
              EXCEPTIONS
                document_id_not_exist      = 1
                operation_no_authorization = 2
                x_error                    = 3
                OTHERS                     = 4.
    Converteing Hexa decimal into srting by loop the internal table  lt_contents_hex.
    lv_raw concatenate hexa decimal values
              CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
                EXPORTING
                  buffer        = lv_raw
                IMPORTING
                  output_length = lv_length
                TABLES
                  binary_tab    = it_temp_binary.
         CALL FUNCTION 'CVAPI_DOC_CHECKIN' ......

    Hi,
    thank you.
    The DB-Version is 9.2.0.4.0
    This document does not help me...
    I need to create any procedure that inserts the nodes(tag-name) and when the node has any content then the content too in the table and s.o., so how I have it entered in the question...
    Any Idea?
    Regards

  • How do I customize the Email Attachment name in Email Bursting?

    I had worked on BI Publisher extensively on 10g and 11g. I have a client requirement with BIP email bursting to deliver the reports as email attachments. I'm able to do it, and also customize mail body etc. However the email attachment file name is randomly generated with some numbers. I read through the docs, and couldn't find any parameter mapping to the attachment/file name (like we do it with File bursting). How do I specify the mail attachment file names in my Busrting properties?
    Thanks,
    Padma

    Please go through the following link:
    http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
    I think after the 'Output' we can specify the filename

  • Provisioning - Emailing User Name and Password to end user

    In GRC AC 5.3  Access Enforcer when a new user account is provisioned, a URL or link is sent to the end user's email.
    When the user clicks the link the user can view the user name and password.
    My questions?
    1. Should the end user have a UME role, to click the link and view the loginid and password?
    2. Is this 'URL menthod' optional or, is there a configuration to change it back to plain text login and password like in the GRC AC 5.2 version?
    Any help is appreciated.

    Hi Prakash,
        Here are the responses to your questions:
    1. Should the end user have a UME role, to click the link and view the loginid and password? No. End user does not need to have any role.
    2. Is this 'URL menthod' optional or, is there a configuration to change it back to plain text login and password like in the GRC AC 5.2 version? Yes, it is optional.
    You need to set Send Password in Email Reminder option to Yes at Configuration>Workflow>Email reminder-->Closing Tab.
    Regards,
    Alpesh

  • Outlook Calendar Email Display Name and Reply to Name

    I need help to change the display email address and reply-to-email address used when I create and send calendar invitations from Outlook.
    Here is my setup.
    I am using Outlook 2013 that is connected to an Exchange server.
    I have 2 email systems.
    My main email system is NOT using Outlook.  All of my emails flow through, as an example, [email protected]
    Outlook is used only for my contacts and calendar.  For this email let's call it [email protected]
    Right now when I send a calendar invite it comes from [email protected] and the reply-to-address is [email protected]
    I would like the "from name" and "reply-to" name for all calendar invites to be displayed at [email protected]
    My [email protected] will redirect all calendar invites to [email protected]
    How can I configure Outlook to do this?

    So to my understanding there are 2 different email systems: one handling the @email1.com, based on Postfix/sendmail/Exchange/<other mail server> and one handling the @email2.com based on Exchange.
    If you add an accepted domain in your Exchange organization - @email1.com - then you'll be able to add the [email protected] address to the list of email addresses stamped on your Exchange mailbox. Following this, the recently added address can be specified
    as reply-to address (Primary SMTP Address). On the other email system, you'll have to use @email1.com as an internal relay accepted domain (similar to the notion described
    here) and configure a connector to send email to the Exchange organization for @email2.com. As for the forwarding itself - if that system is also Exchange - the 'targetAddress' attribute could be used, which will instantly forward the email to the '[email protected]'
    value that should be stamped inside (see
    this link); if a different email system, then the equivalent feature of 'targetAddress' should be used. 
    Yet the whole setup is cumbersome to say at least. Could you give more details about what is it you're trying to achieve at a higher level ?

  • ICloud emails showing name and email address

    Is it possible to get the display to just show my name and not the address i.e. John Doe instead of John Doe <[email protected]>?  My other emails only show names (Exchange and POP account).

    Is it possible to get the display to just show my name and not the address i.e. John Doe instead of John Doe <[email protected]>?  My other emails only show names (Exchange and POP account).

  • Change PO Email Attachment Name

    Hi Guys,
    I've implemented SAP Note 191470 to change the subject line and the attachment name to contain the PO number. I was successful in changing the subject line but not the attachment name. Currently, the attachment name is defaulted by SAP to 'Print data'.
    In the note, it states:
         Note that the values from the mail title are used to create the description for the attachment.
    I've maintained the mail title in the condition record for the output type on the 'Communication method' tab page in the 'Cover Page Text' field but to no avail. I'm probably missing a step.
    I did my due diligence by searching the internet but I haven't found any solution.
    Any help would definitely be appreciated. <removed by moderator>
    Thanks in advance,
    Derick
    Message was edited by: Jürgen L

    Have a look into this  KBA it is listed under FI, but you can try if the same solution would work for you too: 1702035 - How to change the attachment name in the mail for correspondence

  • Charged my email(user name) and now we can't update apps from the original email is there a way to link?

    apps from old email user name will not update. Anyone know how to link this

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on the iPad and whether you can then update the older apps. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

Maybe you are looking for