B2B Sizing

Can anybody point me to a sample sizing and deployment of B2B and the ebxml adapter.
I am looking at a system transmitting up to 20,000 messages per day using http. Initally 2 trading partners and I do not anticipate message files to be larger than 15K
Any help appreciated.

Hello,
B2B's ebXML adapter can be deployed in a HA env to handle this load.
Please note that factors like message size, whether security (encryption, signing) is enabled,
whether sync ack required can definitely will have an effect.
There are government sectors in Canada which have deployed ebXML and been in production
for some time. Please contact Jeff ( [email protected]) you need any specific details.
Rgds,Ramesh

Similar Messages

Hardware sizing recommendations for B2B Server

My customer Welch Foods Inc. is on 11i Oracle eBusiness Suite and is planning to uptake the latest 1Sync integration features in the PIM product. For out-of-box AS2 connectivity with 1Sync - they are planning to use Oracle B2B Integration Server 10.1.2.3.
They have an average transaction volume of 30 transactions per month. One time - initial load of 20,000 transactions.
Based on the above estimates, they are looking for hardware sizing recommendations for the B2B server.
Your assistance is much appreciated.
Asmi Maharishi
SDM for Welch Foods.

Thanks for your reply!
Here are the responses to your queries:
1. Is B2B instance going to run alone in a box
Yes, B2B instance will run alone on a box.2. what will be the size of message
Messages can be anywhere from 5-20 KB3. how many messages will be part of a transaction.
It should be 2 - Registration and publication. But sometimes it depends on how successful the first “registration” goes. Typically we get one or two errors that the users go into PLM, correct and re-send.However, Looking at your current requirement, 30 transaction per month, we can easily address in a 4 GB machine itself.
Additionally, Oracle B2B supports 10+ messages per second in 32GB, 4 processor machine.
Memory suggested above is 4GB, does that take into account memory used by the 10G App server foot print or this is only to take care of messages? Also, how many Processors (Risk IBM) will be needed?

Errors in B2B.log

I have pointed out the errors in bold in my b2b.log,please comment on this .
2006.10.05 at 17:52:12:223: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2006.10.10 at 11:00:07:804: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2006.10.10 at 11:00:07:999: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2006.10.10 at 11:00:08:137: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2006.10.10 at 11:00:08:138: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2006.10.10 at 11:00:08:299: Thread-10: B2B - (ERROR) IPMessage Exception From :null To: null Doc Type: null Revision: null Payload: oracle.sql.CLOB@8a52b6 - null
2006.10.10 at 11:00:08:362: Thread-10: B2B - (ERROR) java.lang.NullPointerException
     at oracle.tip.adapter.b2b.data.IPMessageOld.<init>(IPMessageOld.java:100)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:486)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:345)
     at java.lang.Thread.run(Thread.java:534)
2006.10.10 at 11:00:08:419: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2006.10.10 at 11:00:08:474: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2006.10.10 at 11:00:08:474: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2006.10.10 at 11:00:08:474: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2006.10.10 at 11:36:57:941: B2BStarter thread: B2B - (DEBUG) B2BStarter - Current list is empty. Shutdown B2B
2006.10.10 at 11:36:58:008: B2BStarter thread: B2B - (DEBUG) B2BStarter - Shutdown B2B
2006.10.10 at 11:36:58:630: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown B2B server start
2006.10.10 at 11:37:18:663: Thread-10: BusinessLogicLayer - (ERROR) caught error: Closed Connection
2006.10.10 at 11:37:18:672: Thread-10: IP - (ERROR) java.sql.SQLException: Closed Connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
     at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1267)
     at oracle.jdbc.OracleConnectionWrapper.rollback(OracleConnectionWrapper.java:90)
     at oracle.tip.repos.core.driver.CatalogDriver.disconnect(CatalogDriver.java:1662)
     at oracle.tip.repos.core.persistency.PersistencyService.disconnect(PersistencyService.java:578)
     at oracle.tip.buslogic.common.ExecutionContextImpl.disconnectService(ExecutionContextImpl.java:596)
     at oracle.tip.buslogic.common.ExecutionContextManager.closeLongRunningContext(ExecutionContextManager.java:511)
     at oracle.tip.adapter.b2b.data.B2BExecutionContext.close(B2BExecutionContext.java:208)
     at oracle.tip.adapter.b2b.data.DBContext.shutdown(DBContext.java:141)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:395)
     at java.lang.Thread.run(Thread.java:534)
2006.10.10 at 11:37:18:687: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end ignore exception
2006.10.10 at 11:37:18:688: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end
2006.10.10 at 11:37:18:937: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown Transport and App Transport
2006.10.10 at 11:37:18:938: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B Server shutdown
2006.10.10 at 11:37:49:165: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2006.10.10 at 11:37:49:864: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2006.10.10 at 11:37:49:887: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2006.10.10 at 11:37:49:889: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2006.10.10 at 11:37:49:889: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2006.10.10 at 11:37:49:891: B2BStarter thread: B2B - (DEBUG) XEngine is already started. So clear cached objects inside XEngine.
2006.10.10 at 11:37:53:928: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize enter
2006.10.10 at 11:37:53:928: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize exit
2006.10.10 at 11:37:53:932: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2006.10.10 at 11:37:53:932: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2006.10.10 at 11:37:53:937: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext
2006.10.10 at 11:37:53:938: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2006.10.10 at 11:37:53:938: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2006.10.10 at 11:37:54:988: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /etc/ORACLE/WALLETS/applmgr/ewallet.p12
2006.10.10 at 11:37:55:099: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://Vision1_server//project1/bpel
2006.10.10 at 11:37:55:100: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://Vision1_server//project1/bpel file.receiver.channel_mask = None
file.receiver.wallet_location = /etc/ORACLE/WALLETS/applmgr/ewallet.p12
file.sender.channel_mask = None
file.receiver.user = applmgr
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
polling_interval = 60
file.receiver.polling_interval = 60

This is the Payload generated from the fields we have mapped into different elements of 850.xsd.From here you can find the different values we have populated in different xsd elements using BPEL transformation activity.When we are running the business message status report in B2B the status is invalid and error is AIP:51505,General Validation Error.There we are getting this Payload.It shows the fields we have mapped in BPEL.
<?xml version="1.0" ?>
- <Transaction-850 xmlns="http://www.edifecs.com/xdata/100">
- <ns1:Segment-ST xmlns:ns1="http://www.edifecs.com/xdata/100">
<ns1:Element-143>850</ns1:Element-143>
<ns1:Element-329>A850</ns1:Element-329>
</ns1:Segment-ST>
- <ns1:Segment-BEG xmlns:ns1="http://www.edifecs.com/xdata/100">
<ns1:Element-353>00</ns1:Element-353>
<ns1:Element-92>KN</ns1:Element-92>
<ns1:Element-324>4686</ns1:Element-324>
<ns1:Element-373>20061016</ns1:Element-373>
</ns1:Segment-BEG>
- <ns1:Segment-PID xmlns:ns1="http://www.edifecs.com/xdata/100">
<ns1:Element-349>F</ns1:Element-349>
<ns1:Element-352>Printer Mechanism</ns1:Element-352>
</ns1:Segment-PID>
- <ns1:Loop-PO1 xmlns:ns1="http://www.edifecs.com/xdata/100">
- <ns1:Segment-PO1>
<ns1:Element-350>1</ns1:Element-350>
<ns1:Element-330>1</ns1:Element-330>
<ns1:Element-355_1>EA</ns1:Element-355_1>
<ns1:Element-234_1>Standard Purchase Order</ns1:Element-234_1>
</ns1:Segment-PO1>
</ns1:Loop-PO1>
- <ns1:Loop-CTT xmlns:ns1="http://www.edifecs.com/xdata/100">
- <ns1:Segment-CTT>
<ns1:Element-354>1</ns1:Element-354>
</ns1:Segment-CTT>
</ns1:Loop-CTT>
- <ns1:Segment-SE xmlns:ns1="http://www.edifecs.com/xdata/100">
<ns1:Element-96>6</ns1:Element-96>
<ns1:Element-329>A850</ns1:Element-329>
</ns1:Segment-SE>
</Transaction-850>
We have got this example in from the internet:
The header information like <ISA>,<GS>, <GE>,<IEA> are not there in the xsd we are using i.e. 850.xsd.Is it manadatory to have these fields for generating the envelope for the EDI document?If I don’t have these fields in the 850.xsd,should I add these fields,then how will I have the corresponding 850.ecs?
In this 850.xml you can see they have <ISA>,<GS>, <GE>.
- <PurchaseOrder>
- <ISA>
<LineID>ISA</LineID>
<AuthInfoQualifier>00</AuthInfoQualifier>
<AuthInfo />
<SecurityInfoQualifier>00</SecurityInfoQualifier>
<SecurityInfo />
<InterchangeIDQualifier1>01</InterchangeIDQualifier1>
<InterchangeSenderID>05922333338</InterchangeSenderID>
<InterchangeIDQualifier2>12</InterchangeIDQualifier2>
<IntechangeReceiverID>51043332205</IntechangeReceiverID>
<InterchangeDate>030207</InterchangeDate>
<InterchangeTime>1015</InterchangeTime>
<InterchangeControlID>U</InterchangeControlID>
<InterchangeControlVerNum>00401</InterchangeControlVerNum>
<InterchangeControlNum>000000001</InterchangeControlNum>
<AckRequested>1</AckRequested>
<UsageIndicator>P</UsageIndicator>
<ElementSeparator>></ElementSeparator>
- <GS>
<LineID>GS</LineID>
<FunctionalIDCode>PO</FunctionalIDCode>
<ApplicationSenderCode>0544446348</ApplicationSenderCode>
<ApplicationReceiverCode>5104222205</ApplicationReceiverCode>
<Date>20040916</Date>
<Time>161</Time>
<GroupControlNum>000000001</GroupControlNum>
<ResponsibleAgencyCode>X</ResponsibleAgencyCode>
<VersionIDCode>004010</VersionIDCode>
- <ST>
<LineID>ST</LineID>
<IDCode>850</IDCode>
<ControlNum>20771</ControlNum>
- <BEG>
<LineID>BEG</LineID>
<PurposeCode>00</PurposeCode>
<TypeCode>RL</TypeCode>
<PONum>261111124</PONum>
<Date>20040916</Date>
<ContractNum />
</BEG>
- <MSG>
<LineID>MSG</LineID>
<Message>I would like the ring sized a 13. Thank you, Donald</Message>
</MSG>
- <Address>
<LineID>N1</LineID>
<AddressType>ST</AddressType>
<Name>Donald Duck</Name>
<IDCodeQualifier />
<IDCode />
- <AdditionalName>
<LineID>N2</LineID>
<Name1>[email protected]</Name1>
<Name2 />
</AdditionalName>
- <AddressInfo>
<LindID>N3</LindID>
<AddressInfo1>100 Disney Avenue</AddressInfo1>
<AddressInfo2 />
</AddressInfo>
- <GeographicLocation>
<LineID>N4</LineID>
<CityName>Orlando</CityName>
<StateCode>FL</StateCode>
<PostalCode>32110</PostalCode>
<CountryCode>United States</CountryCode>
<LocationQualifier>CC</LocationQualifier>
<LocationIdentifier />
</GeographicLocation>
</Address>
- <PO1>
<LineID>PO1</LineID>
<AssignedID>1</AssignedID>
<QuantityOrdered>1</QuantityOrdered>
<UnitMeasureCode>EA</UnitMeasureCode>
<UnitPrice />
<BaseUnitPriceCode />
<ProductIDQualifier1 />
<ProductID1>3mm Titanium Engagement Ring Wedding Band</ProductID1>
<ProductIDQualifier2 />
<ProductID2 />
<ProductIDQualifier3 />
<ProductID3 />
<ProductIDQualifier4 />
<ProductID4 />
<ProductIDQualifier5 />
<ProductID5 />
<ProductIDQualifier6 />
<ProductID6 />
<ProductIDQualifier7 />
<ProductID7 />
<ProductIDQualifier8 />
<ProductID8 />
<ProductIDQualifier9 />
<ProductID9 />
<ProductIDQualifier10 />
<ProductID10 />
- <PID>
<LineID>PID</LineID>
<DescType>F</DescType>
<Description>3mm Titanium Engagement Ring Wedding Band</Description>
<AgencyQualifierCode />
<ProductDescCode />
<Description1 />
<SurfaceCode />
<SourceSubqualifier />
<ResponseCode />
<LanguageCode />
</PID>
</PO1>
- <CTT>
<LineID>CTT</LineID>
<NumberOfLineItems>1</NumberOfLineItems>
<HashTotal />
</CTT>
</ST>
- <SE>
<LineID>SE</LineID>
<NumberOfSegments>9</NumberOfSegments>
<TransactionSetControlNum>20771</TransactionSetControlNum>
</SE>
</GS>
- <GE>
<LineID>GE</LineID>
<NumTransactionSets>1</NumTransactionSets>
<GroupControlNum>000000001</GroupControlNum>
</GE>
</ISA>
- <IEA>
<LineID>IEA</LineID>
<NumFunctionalGroups>1</NumFunctionalGroups>
<InterchangeControlNum>000000001</InterchangeControlNum>
</IEA>
</PurchaseOrder>
Message was edited by:
Prabal

Need Help - BPEL sizing & capacity planning

Greetings,
We are considering moving our EDI processing to Oracle Integration with BPEL. I have searched high and low for sizing and capacity planning guidelines for BPEL (and B2B) but have not been successful.
Could one of you help me out with this - point me to links, send me actual documents etc. My contact information is included below.
Thanks very much in advance.
Milind Gadre
Advanced Solutions Architect
adx - Advanced Data Exchange
t: 510.493.5119
e: [email protected]

Thare are some resources:
Oracle Appserver Performance Guide, chapter 7 Tuning BPEL:
http://download-west.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm
BPEL Webinar, performance tips
http://www.oracle.com/technology/products/ias/bpel/htdocs/webinars.html
In general every customer has his own unique business processs implemented. Based on the implementation of the application architecture of the BPEL processes, the best way to size the system is to measure it. What is the expected / estimated load of message that BPEL PM will process? What type of adapters is used? etc...

DPS Enterprise License for Apple's B2B Store

Hey everyone,
we developed an app and successfully tested it on our iPads via DPS. We aim to distribute the app via the B2B store from Apple and the tutorial PDF from Adobe tells me that we need an "Enterprise license" for DPS.
Our company uses Adobe Creative Cloud and I am wondering now whether this already means that we have an "Enterprise license" for DPS, as well?
Cheers,
Alex

No. It does not.

Error while importing a new CERT in oracle 10G B2B

Hi All,
I am trying to upload a new certificate in 10 G B2B server, its not updating a certificate, I am facing the below error while importing
Error
An error occurred when updating the certificate.
Error -: AIP-16001: The model validation engine failed due to an internal system error.
Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
Note: Please help me in resolving this ASAP.
Regards
Sai

Hi Sai,
It seems you are updating certificate in a delivery channel which is being used in a validated (or may be deployed) agreement. Please retire/purge any deployed configuration which is using that delivery channel and also make sure no such agreement is in valid state(which is using this delivery channel).
Regards,
Anuj

Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

Dynamic filename in receiver AS2 adapter in B2B Add-on

Hello Experts,
Can you please let me know how we can put dynamic filename in the receiver AS2 adapter for B2B Addon on SAP 7.4.
Thanks
Saurabh

Hi Ryan / Experts,
Let me explain you in more detail.
In the receiver AS2 Communication channel, if I keep the Filename field as blank as shown below, then in the Mendelson inbox folder, a file is generated with the name "ASJAVA_DX5" which is my business component name.
If I fill the filname field for example with "CONTRL", then in the Mendelson inbox folder, a file is generated with the name "CONTRL".
This is my requirement because, suppose i trigger this interface "first time", a file with static name (ASJAVA_DX5/CONTRL ) would be generated in the inbox folder. If I trigger this interface "second time", since the file already exists with same name, it is not overwritten and I cannot check the output of 2nd trigger . Contents are not overwritten.
To solve this problem + as a general requirement, I wish to have this name to be dynamic, atleast with date+timestamp.
Can you please help.

Data Federator Sizing & Usage

Hi,
I am looking for a Data Federator wiki & sizing guide..
we have in the process of installing Data Federator 3.0 on a windows platform.
I am not familiar with this component. Please throw some light on how is it exactly used..
What does the Data Federator do ? why is it implmented...Please help me..

Hi
I would recommend to take a look at the user guide:
http://help.sap.com/businessobject/product_guides/boexi3SP2/en/xi3_sp2_df_userguide_en.pdf
Regards,
Stratos

Erro B2B de entrada

Olá Pessoal,
Não sou PI, e não tenho um aqui disponível no momento... por isso preciso da ajuda de um...rsrs
Estou com um erro no recebimento de NF-e via e-mail, meu B2B está configurado para receber e-mails com vários anexos, porém ele lê o PRIMEIRO XML válido e descarta o restante dos arquivos.
Está configurado para se comportar desta forma...
Porém, tenho um e-mail com três arquivos:
41110178956968002712550050000071344110034264-nfeProc.xml
41110178956968002712550050000071344110034264.xml
41110178956968002712550050000071344110034264.pdf
O que meu sistema deveria fazer era ler o primeiro XML válido e descartar o restante dos arquivos, porém ele não lê nenhum e na SXI_MONITOR ele dá um log de erro, porém como não so PI não consigo interpretá-lo:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">NO_IIF_CASE_ASYNC</SAP:Code>
<SAP:P1></SAP:P1>
<SAP:P2></SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Unable to find an inbound interface</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Na SXI_MONITOR:
Na coluna "Error Category" está a seguinte informação: IF_DETERMINATION
Na coluna "Error ID" está a seguinte informação: NO_IIF_CASE_ASYNC
Alguém poderia me ajudar por favor?
Muitíssimo obrigado,
Mateus.
Edited by: MATEUS PARREIRA GUIMARÃES on Feb 7, 2011 7:05 PM
Edited by: MATEUS PARREIRA GUIMARÃES on Feb 7, 2011 7:05 PM

Então Henrique,
Não sei, achei estranho por isso, não tem nada indicando...
Para ver se consigo ajudar a identificar vou lhe falar as pastas que tenho:
Interface Determination (Bandeirinha vermelha com erro: Sistem Error - Manual Restart Possible)
      SOAP Header
            Main
            ReliableMessaging
            Error
            HopList
            RunTime
            PerformanceHeader
            Diagnostic
            Trace
      SOAP Body
            Manifest
      Payloads
            MailMessage ( multipart/alternative;boundary="----=_NextPart_001_0004_01CBC
            MailAttachment-1 ( text/xml;name="41110178956968002712550050000071344110034
            MailAttachment-2 ( application/pdf;name="4111017895696800271255005000007134
            MailAttachment-3 ( text/xml;name="41110178956968002712550050000071344110034
Qual conteúdo você quer que eu envie?
Abs.
Mateus.

Processo B2B aguardando processamento em background - NFE 3.10

Boa noite,
após implementarmos a versão 3.10 da NFe todos os nossos e-mails de XML para nossos parceiros no GRC ficam aguardando que alguém clique no botão "Continuar processo B2B", só então eles são enviados.
Verificando o status do B2B constatei que ele apresenta o status "Esperando por processamento em background".
Alguém saberia por favor me dizer qual configuração esta faltando para que o envio fique automático?
Agradeço antecipadamente.
Helio Camargo

Helio,
Você pode agendá-lo de 1 em 1 minuto ou 5 em 5 minutos, vai de acordo com a disponibilidade de recursos (Background Working Process) que seu servidor possui.
http://help.sap.com/saphelp_nw70/helpdata/EN/4a/2d513897110872e10000009b38f889/content.htm
Em vários clientes onde passei, 5 minutos de intervalo entre as execuções já era suficiente.
Ele vai processar apenas os processos que estão com status inicial.
[]'s

Licença de SAP Netweaver Portal para Processo de B2B

Pessoal, boa tarde!
Alguém sabe me dizer se para utilizar o SAP Netweaver Portal para os processos de B2B é necessário comprar licença SAP ou está incluso no pacote onde a empresa compra o GRC e o PI?
Essa licença do PI que a empresa tem direito nessa compra, é somente para o processo de NF-e ou ela pode utilizar para integração com outros processos e sistemas?
No aguardo, obrigado.
Danilo

Danilo,
a licenca do NFE inclui:
- Netweaver runtime: licença Web AS (ABAP e Java) para rodar os componentes SLL-NFE e SLL-NFE-JWS.
- PI runtime: exclusivamente para utilizacao das interfaces do XI Content de NFE (SWCV SAP SLL-NFE 1.0).
Se vc precisa do PI para outras interfaces e/ou precisa do Portal para disponibilizacao de telas para clientes/fornecedores, essas licencas realmente estao fora da licenca do SAP NFE 1.0.
Att,
Henrique.

Email B2B Encapsulado

Bom dia pessoal,
Em nosso ambiente GRC, já temos o envio de email configurado para o B2B. Após uma mudança na política de segurança da empresa, o servidor de email passou a encapsular e reenviar a mensagem original enviada pelo cenário de B2B para poder acrescentar e anexar o texto de confidencialidade de email padrão da empresa.
A dúvida é se eu tenho como configurar o adapter para permitir que a mensagem aceite que texto seja inserido pelo servidor Exchange diretamente no corpo do email, sem que seja necessário o encapsulamento?
Abraços

Bom dia Migdon,
Acho que em se fornecendo um body personalizado, como pelo link abaixo, você resolve seu problema:
Sample code to create email body and XML attachment in an outgoing NFE B2B e-mail communication
Atenciosamente, Fernando Da Ró

Erro "B2B: erro de sistema PI"

Olá a todos. Aplicamos a versão 2.0 do GRC, Support Package 15 e após isso, quando uma Nota Fiscal é cancelada, o cliente não recebe o XML desse cancelamento, apresentando um erro no GRC como: B2B: erro de sistema PI. Nessa nova versão esse envio é obrigatório. Alguém já passou por esse erro? Tem alguma idéia do que pode ser?
Obrigado a todos que puderem ajudar
Marcos Cristiano Ickert
Basis

Marcos,
Alem de configurar o Cenário para o novo namespace 006, no Design para o Produto/SWCV usado o B2B você precisa alterar o Interface Mapping(7.0)/Operation Mapping(7.1) de Envio(NTB2B_procNFe_TO_procNFe)/Cancelamento(CTB2B_procCancNFe_TO_procCancNFe) para o namespace 006, assim como já deve estar para a versão 005a.
(isso apenas para os objetos do seu produto/swcv)
OBS.: caso vocês utilizem a solução igual ou parecida com o que Henrique postou no forum.
E caso você precise reiniciar esse erro de B2B no GRC, como você está SPK 15 será necessário aplicar a nota 1512936 para tirar o dump que gera.
Espero que ajude.
Abraço,
Bruno Lima

Dúvida leitura do XML B2B

Bom dia pessoal,
Estou com uma dúvida aqui:
Estamos implementando o cenário B2B para notas de entrada. O cenário NFB2B_WebAS_Inbound_B2B_NFe, será implementado para pegar arquivos XML de um diretório X da rede.
Gostaria de confirmar se, os dados do XML serão armazenados diretamente na tabela /XNFE/XMLIN. O proxy para este cenário está implementado diretamente pelo pacote SLL-NFE ?
Precisaremos também, dar entrada nas NFes a partir dos XMLs. Será necessário fazer um XSLT Transformation para utilizar os dados armazenados na string da tabela /XNFE/XMLIN (para enviá-los ao R/3) ?
Estamos na versão 1.0.
Abraços e muito obrigada,
Luciana Rossan

Olá Luciana,
sim, existe um proxy standard para entrada (recebimento) dos XMLs no NFE 1.0 e, sim, se vc entra o XML por esse proxy ele já armazena o documento.
Quanto à entrada no ERP, aconselho a considerar a implementação do SAP NFE Incoming (módulo de recebimento automatico) incluído no NFE 10.0. Veja mais detalhes aqui:
Abs,
Henrique.

B2B Sizing

Similar Messages

Maybe you are looking for