Back-to-Top Link in BW Report in Portal

Hi,
I'm trying to determine the best way to insert a back-to-top link in a BW Report. The Reports are displayed in the Portal as an iView or External Service depending on other factors.
Portal is EP5 SP5, BW 3.0B and using the Web Application Designer to create the Portal Report.
Would like a link at the bottom of the report which takes the user back to the top. Similar to what is seen on most pages. Using simple Bookmark and link does not seem to work.
Thanks
Paul

Hi Paul,
Have you tried the simple:
<a name="top"></a>
<a href="#top">Back to Top</a>

Similar Messages

Sublinks within a page - i.e .back to top

anyone know how to link to text further down on same page and have a "back to top" link at bottom of page? I know this is very simple, but can't seem to figure it out in iWEb '09. Thanks thanks!!

I got the info from Peter Berglund's blog site here: http://web.me.com/petber/iWebtips/iWeb_Tips/iWebTips.html.
You can add a HTML snippet with the following code just above where you want the window to open,
The top of the window will be approximately at the bottom of the widget. To find the URL for that position publish the page and go to it. Then add #widget1 at the end of the url and hit the enter Key. If 1 doesn't sent you where you want replace it with 2, etc. It's a trial and error if you have many widgets on the page. The you use that URL for the hyperlink of the button. The resulting code will look like this: http://web.me.com/toad.hall/Demo_3/SimpleViewer.html#widget2

Email subject and Back to top in WPC

Hi All,
I have 2 questions in WPC.
When you click the E-Mail link in the page header links section on a page, WPC opens a blank mail message with a subject that is prefixed with "Web Page Composer:". Is there a way we can change that.
Articles have a Back to Top link at the bottom. Is there a way to remove that ?

Hi Suresh
I have same requirement to control back to top in WPC. Can you explain further about the container and layout settings please?
Thanks!
Lee Lewis

Discoverer viewer in portal or Drill to detail in Disco report in Portal

Hi
Is it possible to embed discoverer viewer into Portal page. I know one way, I can achieve this in older versions by using <IFRAME src="worksheet url"></iframe> as HTML portlet. But, the problem here is that, our Discoverer viewer is SSO protected. So,I don't want user to single sign on again, as they have already have done that when they got into portal.
My second question is , I have developed Page-Detail report in Disco plus, also I have Drill to Detail in the same report. Drill to Detail is created using "Manage Link" option. When I deploy this report into Portal using Disco Portlet provider, firstly in portal it is not showing the Page Item, also the Drill through link also is not showing.
Any help on the above questions would be greatly helpful.
Thanks
Balaji

Hi
Firstly thank you very much for your response.
The Disco report I have is a Discoverer Plus report with Drill to Detail to another workbook(developed through manage link). But this Drillable link is not showing in the published Disco portlet. Are you saying that it should in the published disco portlet? .. As posted in previous response , I know this would work from Analyze link(which basically lauches viewer)..
But users would like to see this drillable link in the report in portal page itself(which means on the published portlet itself). To achieve this only, I used Iframes in Html portlet and showing the Discoverer viewer url. It works fine, but only thing is each time user naviges to portal page, it executes the report which takes some time. I am trying to avoid the execution process. I think one solution is I can just schdule these Disco reports and that way it will not query the database each time. I was wondering if there is any other solution maybe I am missing
Thanks
Balaji

Mysterious top link

I wanted to implement a report template that mimicks the top-link graphic implementation that's found in many of the HTML DB app builder pages. So I got my graphic with a link of <~a href="#top"><~img src="/i/up_arrow.gif"><~/a> into the region template and was testing it out, expecting it to not work because I hadn't defined the top link name for the page template yet. But to my surprise it worked, and continues to work just fine.
Is this a fluke and do I really need to define the anchor name "top" for the page template? or is there some built-in (either HTML or HTML DB) thing that is making this work? I just want to make sure this thing continues to work.
Earl

That is just standard browser behaviour when you
throw a unknown named page anchor at it.Nice. I like it.
While we are on the topic, I have never really
understood why an application needs to implement this
feature. Doesn't pressing the Home key on the
keyboard do the same thing? i.e. go to the top of the
page? So, why re-invent the wheel?Some people are "mousers". When they're mousing they don't want to keyboard if they don't have to. After all - it is a movement of about 6 - 9 inches from that mouse to the keyboard - and we wouldn't want to get too much exercise while we're working at the ole' computer now, would we? ;>)
Actually, the use-case is such that the user is scrolling a long report page and the top has long since gone out of view. And if they're using the mouse to scroll down to view data they may as well have a quick way to get back from whence they came.
Earl

Links in Discoverer Reports

I am new to Discoverer Reports so i want know, how to implement links in discoverer reports, I have two worksheets/links/pages in a
Discoverer Report, in the first worksheet/page some data will be displayed,
i want to display links for a particular column, if i click on the column value/cell value, it should take me to another page/worksheet with the column value
/cellvalue as parameter to the next page/link.
Provide me a solution for creating this discoverer report.
Thanks,
Manju.

Manju,
I'm not sure which version of Discoverer are you using. If you are using Discoverer 10gR2 then you can follow these steps fot that. I'm assume you want to show header(Eg; PO) information on one sheet and when user click on it you want to show the (PO)line information. Taking the PO report as example follow these steps in discoverer plus.
Create 2 worksheets with the necessary information.Keep the PO Number in both the sheets. Select PO Number then goto Tools-->Manage Links and select the destination workbook and sheet. Give a name to the link. This will give you the information you need but will still show you line level information for all the PO's. Create a condition in both sheets for PO Number go back to edit link and the parameters button is enabled select the PO# parameter there. Hope this helps.

Link from BIP report to P6RiskModule

A client of mine is running BI Publisher 11g. In BIP they have a report summarizing the risk against a project. This report is displayed in a BIP Dashboard. The client would like a link in the report that would take them directly to the P6RiskModule. The usernames and passwords for BIP and P6 are identical, so ideally the link should log the user into P6 and display the risk details as entered in P6.
Can anyone assist?

if you are on 11.1.1.6 version you can do it i think .
check the link below
http://docs.oracle.com/cd/E25178_01/bi.1111/e22257/whatsnew.htm#CHDCDBCA
Enhancements to Parameter Display Options
Enhancements to parameter display options include:
Support for radio button and check box display of values
Parameters that are defined as a menu in the data model can now be configured to display the menu options as a list of radio buttons or check boxes. Parameters configured to support one value support the option to display as radio buttons. Parameters configured to support multiple values support the option to display as check boxes.
New options for placement of parameters in the report viewer
Previously the report viewer always displayed the parameters in a horizontal region across the top of the viewer. In this release the display of the parameter region can also be configured in one of the following ways:
In a vertical region along the right side of the viewer
As a dialog
As a separate full page
New report viewer action button to show or hide parameters
This release adds an action button to the report viewer to enable users to hide or show the parameter region. This enhancement complements the new parameter display options. When report parameters are configured to display as a dialog or in a separate full page, the parameter display region is dismissed when the viewer displays the report. Use the Parameters button to redisplay the parameter region to make new selections.
Search added to menus
All parameter menus having more than a specified number of options provide a Search option. For more information, see Section 3.3.1.1, "The Parameter Search Dialog."
Option to remove the Apply button
Reports can now be configured to remove the parameter Apply button. In these reports the action of selecting a new parameter value automatically reruns the report.

Show a report region only when link in other report is clicked

Hi Friends,
I am having 2 report regions.In my first report region i am having a column as a link. I want to show the 2nd report
region only when the link in the 1st report region is clicked. There is a button in the 2nd report region i want to show
that button only when the link in the first report is clicked.
The code for my first report is
select * from tasks;i have a link column task_id as
f?p=&APP_ID.:10:&SESSION.::&DEBUG.::P10_TASK_ID:#TASK_ID#My 2nd report code is
select * from task_details where task_id=:P10_TASK_ID;Plz help,
Thanks,
TJ

Hi Andy,
I tried this but having one problem. When i press a link the vaule of P10_TASK_ID is set and the 2nd report is shown.
When i go to other page and come back to this page the 2nd report is showing even with out pressing the link this is
because the value set for :P10_TASK_ID is still there. Where can i put the value back to null so that the 2nd report is
not shown with our pressing the link in the 1st one.
Thanks
TJ

Adding a New Contact Record link in a report

Dear Gurus,
I've followed instructions on how to create a New record link in a report using instructions from the Oracle CRM On Demand Reporting book but needed additional help in terms of how to auto populate the Account Name onto the New Contact Edit screen. I've created a custom Contact report that is setup as a web applet to replace the OOB Contact section that is showing on the Account Detail screen.
On this report, I've created a hyperlink that opens a New record edit screen for a Contact record. I need to pass in the Account Name since this is a required field on the Contact Detail screen and needed help with the URL that I've entered as a custom text format in the column formula. From the M. Lairson's Reporting book, I've entered:
@[html]*a href="/OnDemand/user/ContactDetail?OMTGT=ContactDetailForm &ContactDetailForm.Id="@target="_
top">"Contact Details"*/a*
(html not displayed correctly - I've to substitute < and > with *)
This worked great but I need to pass in the Account Name. Can you help with a URL that will do what I needed? Thanks.
Edited by: TTone on Jul 26, 2010 12:16 AM
Edited by: TTone on Jul 26, 2010 12:27 AM

Hi,
Copy the URL from the contact create link and pass the values like Account Name etc by adding it to the URL, use & to separate the values.
hope it helps,
Mayank

Top Link error 17002 The Network Adapter could not establish the connection

I have installed an application developped in an another environnement.
I have created the database schema in my own database.
I have created a database connection to this schema.
I have reconciled the schema using this connection (so the database and the connection are available and correct from jdeveloper)
I have updated the Mapping to use the new connection and new generated the mapping status report without any errors
and i still have this error ! The Network Adapter could not establish the connection when i access any jsp document containing data from the database.
I check and recheck everything and all is correct ... sure something is wrong somewhere ... where is the question ...

Sorry I think you didn't read the thread or you read it too fast !
I'm not a beginner and I know what the problem is but all the settings are correct in jdev and the database and the listener are running ... i'm able to browse the tables, seeing data reconciling objects with the database connection referenced in the top link descriptor
It seem that top link is using something else and i don't understand from where it took the connection description.

Deactivate a link from a report

Is it possible to deactivate a link from a report? Here is the problem I am facing. I have a database that will be used by 6 people and I am using a report to display records to be worked. So, when one user clicks on a record to make edits, I want to ensure that the other 5 users can't select the same record. I am trying to keep users from doing duplicate work and having an error message given to the user who doesn't save the record first. I didn't know if it was possible to do a conditional link by checking the session to see if the record is currently called up? Any help would be appreciated.

Simplistically:
When you "pull up" your record to edit, you can write a onload process to set a flag on that record with the user/timestamp to indicate that the record is locked. When the record is saved back to the database, have the save process clear this flag.
Of course, in a real-world situation, many other factors have to be considered, as Scott was alluding to...
What happens if User pulls up the record and his browser crashes, he leaves the page without saving or goes for lunch or ...? No other user will be able to edit that record. This is generally considered a "non scalable" design, but if it works for you, go ahead!

When approving a PO through SRM inbox, the 'Back to Approval' link ismissin

When approving a PO through SRM inbox, the 'Back to Approval' link ismissing

The issue that you have reported is not a bug, but a strandard. Once the
application is integrated to the Portal, the navigation between screens/
transaction is handled differently and should not be compared to ITS.
In EP, you will have to use the Portal's 'Back' button to navigate back.
Please refer to note # 933450 as the correction is the same for this
issue also.
The link has been removed because navigation in EP is handled
differently as compared to ITS. In EP you use the EP's navigation and
not ITS links like ('Back to Sourcing') or ('Return to Change Version')

Custom Styled Top Link Bar Sharepoint Foundation 2013

I want to be able to style the top link bar with some custom CSS but I am unable to find any guides that walk me through the process. I could use a step by step guide. I have sharepoint designer and I know how to open the master page for editing. I've
tried to link an external CSS page but I still am not quite getting the results I want. I only get part of the CSS to apply. Please help

Hi,
Please check the following article about how to style the top navigation with custom css.
http://msdn.microsoft.com/en-us/library/office/dn205275(v=office.15).aspx
Here is a good article for branding top navigation in SP 2013 ,by explaining the top navigation related style elements :
http://sharepoint.rackspace.com/branding-top-navigation-in-sharepoint-2013
Regards,
If a post answers your question, please click Mark
As Answer on that post and Vote
as Helpful
subhash reddy

SharePoint 2013 Foundation Top Link Bar wrong selected page when no navigation match

Hello,
I've got the following issue.
At one of my clients we are working on a public web site based on SharePoint 2013 Foundation (yes I know... Foundation...). I've branded the Top Nav Bar and ran into a problem.
When I navigate to one of the pages in the Top Link Bar the selected item is marked as "Selected", great! But when I navigate to one of the pages that is not added in the Top Link Bar the first item is marked as "Selected", not so great.
For example when I navigate to /Pages/About.aspx the first item /Pages/Home.aspx is selected.
Can you help me out?

Hi,
Could you give me more detailed information about this issue?
Could you give me a Screenshot about this issue?
In addition, there is an articles about customizing the top link bar, please have a look at:
http://msdn.microsoft.com/en-us/library/office/gg252669(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/gg277254(v=office.14).aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Back-to-Top Link in BW Report in Portal

Similar Messages

Maybe you are looking for