Background image in template viewable in preview but not in compiled output

A co-worker, using RH8 on Windows XP is having a problem with a template that has a background .jpg image. In RH8 the background image is viewable in the preview, but when she compiles the project the background is not there. This image had been viewable in the compiled project when she was using RH7.
I'm at a loss for what to suggest as I don't use backgrounds in my projects.
Any info/suggestions would be greatly appreciated.
Thanks,
Joe

Hi there
The most obvious solution would be to try adding the image to Baggage Files. I'd try that first and see if it changes anything.
With RoboHelp 8, you have an option of overriding the Style Sheet. So it's theoretically possible that what has been specified in the project is being undone by a subsequent choice.
Try the Baggage option first.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Similar Messages

Since Firefox 4, I can get a background image to work using base64 encoded, but not a local file, this worked in Firefox 3, how do I resolve this.

Using either of the 4 examples shown below, to have a background image display inside about:blank worked in Firefox 3.x (using Stylish add-on), however since Firefox 4, only using the base64 encoded version of images works. Is there any way to fix this so I don't have to encode every image I wish to use? Encoding the image makes the stylish file absolutely huge, & a real pain to keep encoding whenever I want to change the image.
body:empty { background: url("resource:/res/images/OnFire.jpg")
body { background-image: url("resource:/res/images/OnFire.jpg")
body:empty { background:url("data:
body { background-image: url("data:
I've also previously disabled most of the add-ons, except for Status-4-Evar, Stylish, & Firebug, in an attempt to see if something else was interfering, but no change.
I can supply a copy of the previously working (FF 3.x) code to some of the about:blank styles if needed for testing purposes.

Type '''about:addons'''<enter> in the address bar to open the '''Add-ons Manager.'''
Hot key; '''<Control>''(Mac:<Command>)'' <Shift> A)'''
On the left side of the page, select '''Plugins.'''
Is it listed here? Select '''Disable.'''

Popups work in preview but not in compiled help

Hello,
I am using Robohelp 8 and have been having problems displaying popups in my compiled help. When I view a topic that contains popup links in the WYSIWYG, I can preview the popup topics with no problem, but when I compile and click on a link that contains a popup, nothing happens. I get a warning in the bottom of the browser window that says "Error on page" with no further details. Is there a setting somewhere that I need to adjust. I have never had this problem before.
Thank you in advance for any input.
Adrienne

Hi there
The popup functionality depends on the ehlpdhtm.js file. Years ago I had a large project where popups broke in topics that were heavily buried in a deep folder structure. I managed to make them work by amending the path to the js file so it was shorter. This also meant I had to copy the js file to the folder where the popups were broken.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Images Viewable in Firefox But Not In Explorer, Safari, Chrome.

I have a coldfusion page with images. The images are called up dynamically from my Mysql database. The image field with my database has the datatype "char(100)". All that is stored in that database field is the file path to the folder of which the image is stored which is: \photos\RSL\1.jpg.
On my webpage, the image placeholder looks like this:
<a href="#Unit_Info.comphoto1#"><img src="#Unit_Info.comphoto1#" alt="" name="1" width="98" height="73" /></a>
This images display just fine on Firefox, But Not In Explorer, Safari, & Chrome. These latter three just show a broken image. Could there be something wrong with either my coldfuson or Mysql file path where each of the letter three browsers are trying to access?
I'm running Coldfusion 9 on my local machine, using OS Window 7 Professional.

When I hard coded the file path it worked. I checked the source code and saw no white space. I even went to each browser's options dialog box to make sure that the show image options were checked. It may be my coding. In my image folder there are categories of other folders within folders that have images of which Coldfusion calls up whenever the browser needs it. Could that be the problem? Should I have all of my 300 images in one folder?
- Hannibal Hasan
On Sep 1, 2011, at 9:30 PM, Dan Bracuk <[email protected]> wrote:
First thing I'd try would be to hard code the expected value and see if that works. If it does, I'd look at the html source code from the problematic browsers and see if there is any unexpected white space.
This message was sent to: College Kid
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3897548#3897548
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3897548#3897548. In the Actions box on the right, click the Stop Email Notifications link. For more information about unsubscribing from the Adobe Forums, please visit http://kb2.adobe.com/cps/522/cpsid_52211.html
--end--

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

Getting values in preview but not on paper

hi gurus,
the variables on a window is showing values in preview but not on paper the window is above a top-left portion of other window..
i need to display those variables on paper at print time...as alignment is perfect ..suggest me how to do?
thnx in advance!!

DEAR SEE THE POSITIONING OF WINDOWS,
FOR THE BOTH WINDOWS WHICH ARE COLLIDING,
GO TO OUTPUT OPTIONS AND MAKE UPPERMARGIN AND HEIGHT IN SUCH A MANNER THAT THEY NO LONGER COLLIDE.
SEE THE OUTPUT.
I THINK THEY ARE COMING NOW.
REWARD IF USEFUL.
aMIT sINGLA

Two issues getting a headless error form windows & my clips audio plays in the preview but not once placed in th timeline. I taped with a panasonic HC 750 V. i believe it is with clips filmed using directed not surround audio.

The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.

pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR

Captivate 3 shows skin in preview but not when I run after published?

Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?

Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin.

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Simple buttons working in Preview, but not on iPad

Hello everyone. I have a Button (I'm working in InDesign CS6), with instructions "Go to State". It links to a photo on a seperate layer. The link works perfectly in the SWF preview (shift-command-return). But when I update the file to view it in Adobe Viewer it does not work. (I am using Viewer Vers 25) There are no other functions on the page that could be "blocking" it. In fact, on some pages where there are two or three buttons (all of them with instructions of "Go to State"), 2 may work and one not. I am confused as to how I can see it working in the Preview, but not on the iPad. Any suggestions appreciated. Many thanks!!

Bob, just got in and downloaded the patch - the buttons are working perfectly now!!
Thank you for taking the time to help me out!! I'll be more diligent from now on in checking for updates. Thanks again. James

Photo collage backgrounds and themes available in Elements 8 but not in PE 11?

How can I use the photo collage backgrounds and themes available in Elements 8 but not in Elements 11?

Hi gcannice,
In PSE11 Adobe moved most of the backgrounds, frames, graphics and themes online. That's why you are not able to see those themes, as those are still not downloaded in your machine.
You will have to keep your Editor launched (with internet connection on) for sometime, in order to see the thumbnails.The online content is differentiated by a blue ribbon on them. Double click on the blue ribboned thumbnail to download the actual content.
Adobe did this to save lot of amout of space on your machine, and make installtion process faster.
-Rahul.

Page background images show in preview but not after uploading

Hi -
I've built a page with a flash animation, and some other
minimal information below the movie. I have a page background image
that should be repeating horizontally behind everything. When I
preview it, all looks great! After I upload it to the actual site
the background images disappear. The code is all within the page.
Any ideas?

never mind... problem resolved.
my error in not checking my files over. oops.

Background image in template viewable in preview but not in compiled output

Similar Messages

Maybe you are looking for