Background Intelligent Transfer Service Consuming the Bandwidth

Greetings,
I have a server running win 2012 R2 essential version, I found out that my download is always maxed out 3 GB per day.
I've stopped the BITS services and suddenly my download indicator is almost 0, I disable the BITS services than i found out it got automatically enable and my download indicator back to full. apparently some other dependency or script is enabling
this services
Questions:
how to prevent the BITS services from automatically run
is it advisable to stop it all the time
what is it downloading or updating
what to do if we have a consumption limit
N.B: I have as well disabled the windows update service.
Regards,
Charbel

Hi Charbel,
Background Intelligent Transfer Service (BITS) transfers files (downloads or uploads) between a client and server
and provides progress information related to the transfers. You can also download files from a peer. Transfers files in the background using idle network bandwidth. BITS is most commonly used by Windows to download updates to your local system.
à
I disable the BITS services than i found out it got automatically enable and my download indicator back to full.
Did you open Event Viewer and check if find any relevant event of this
Background Intelligent Transfer Service?
Please refer to following article and check if can help you.
Background Intelligent Transfer Service (BITS)
Overview
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

The network bandwidth for Background Intelligent Transfer Service (BITS)

I use BITS in Powershell script to download files from Internet. The download speed is 1mb or lower. I tried set 2mb in the following local policy but not working. the reason could be the policy is not for Windows 7. Anyone has suggestion?
Thanks.
Computer Configuration | Administrative Templates | Network | Background Intelligent Transfer Services (BITS) | Limit the maximum network bandwidth for BITS background transfers

Hi，
The following policies are supported in Window 7
Computer Configuration | Administrative Templates | Network | Background Intelligent Transfer Services (BITS) |Set up a maintence schedule to limit the maximum network bandwidth used for BITS Background transfers
or Set up a work schedule to limit the maximum network bandwidth used for BITS Background transfers
see this link
http://blogs.msdn.com/b/wmi/archive/2011/02/02/bits-more-flexible-bandwidth-limit-policies.aspx
And download speed is also related with your network connection, your ISP, setting in your router, your system perfrormance...
Yolanda Zhu
TechNet Community Support

Best method for BITS(Background Intelligent Transfer Service) deployment

Hi,
What is the best method for BITS(Background Intelligent Transfer Service) deployment for over 2000+ Windows 2008 servers at once? Also, does it matter on Windows 2008\2008 R2\2012 if the SCCM agent is installed before we deploy BITS to the servers?
Thanks,
Eric

Hi,
What is the best method for BITS(Background Intelligent Transfer Service) deployment for over 2000+ Windows 2008 servers at once? Also, does it matter on Windows 2008\2008 R2\2012 if the SCCM agent is installed before we deploy BITS to the servers?
Thanks,
Eric
What do you mean by Deploy BITS to the servers? The BITS client should already be installed on then as it is native to the OS.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

BITS - background intelligent transfer service - question - Win 7

Hi,
I have created a script to configure the startup type for the windows services during the OSD TS
I was able to set the startup type for all services to atuo/manual/disabled - except for BITS
it needs to be set as automatic however no matter how I do it the service is always set to Automatic (Delay start)
But the script works and BITS is set to Automatic when I run the script manaully after the installation is completed
Has anyone experience this problem?
this is how I configure the service:
sc config BITS start= auto
and powershell script:
Get-Service -displayName "Background Intelligent Transfer Service" | Set-Service -StartupType automatic
Thanks

What is the matter with you Jason? And Torsten for that matter. What a bunch of inane, unhelpful crap.
Hey Jason, ever worked with NIST? USGCB? DISA? Contract compliance and common sense security concern determines how services start in Windows, not someone from MS product development. How laughable.
My BITS service must be set to Manual or Disabled. Problem is, despite the group policy, my TS boxes are starting to revert to Automatic (Delayed Start). I have no idea how this is happening. A gpupdate fixes it, but these
boxes restart every night and re-process ALL policy ever ~90 minutes, so how the change is being made is a complete mystery.
Of course I scour the inter-verse and find a thread on the subject, but Jason and Torsten have combined their powers to make the thread useless, devoid of information, and annoying to read.
Congratulation Jason and Torsten.

Background Intelligent Transfer stopping - windows 8

Installing anumber of critical updates recently has messed up my laptop. At first internet explorer wouldn't load, but kept asking to reset connection. I ran system restore and a registry clea-up, which was set to run automatically by Norton Utilities. Now
I can't install the Windows Updates anymore - even though it is set to run automatically. Emails, sent via theWindows 8 App are returned with delivery failiure, Internet explorer isn't working but other browsers do. running the troubleshooters, I found out
that that Windows Update depens on a BIT Service, Background Intelligent Transfer, currently in the state of 'stopping'. I can't, with the administrative tools neither start or stop and restart this service. Please give me some suggestions, my computer
will be rendered unuseable soon as it won't install any updates for any programmes, it seems, also the Norton antivirus database. My next step to solve this would be the' Refresh your system' option, but to be honest, I have no idea if it will help, as system
restore didn't work and also won't create any restore points now and neither does the backup utility . I suppose, I would loose all the Windows updates and installed software on my laptop.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

What background process or service using the hotkey?

Hello
I changed some settings in 'msconfig' and now my 'Toshiba-hotkeys' no longer work. I tried to activate several processes and services, but I can't seem to find the right one... Can anyone tell me which process or service it is?
Thx

Hi
depending a bit on which model you have, different software respond to different hotkeys.
To answer your question you must tell us which model you use and which hotkeys are 'dead'.
Or you can do exactly as already mentioned - revert the changes made in MSCONFIG.
BR
Tom

How to consume the Abap web service in Java web-dynpro

Hi Everyone,
I want to consume ABAP web service in java web dynpro.
so when i tried to create model in java web-dynpro, it gave me an error message saying "Invalid WSDL or WSDL not found".
i think this error message is because, to access the WSDL of abap web-service, we need username and password, but the dialog box in java web-dynpro is not programmed to take username and password from us and send it to the server to get the WSDL.
i came to this conclusion because i was able to successfully test my abap web-service in java portal. the java portal asked me the username and password to open the WSDL.
So, please help me to consume the abap web service in java web-dynpro.
Thanks in advance
Regards
Vikas

Hi Vikas ,
while creating a model in web-dynpro try to use the "import web service model" option and if you are using local server choose the local server option so that you can get the available web services which are in server, select one among them and continue you process.I think this is the some what easy way .
If you want use the URL for wsdl better to once test the available service in server and copy that WSDL URL and paste over WSDL textbox.
I think this is pretty help ful to you
Best Regards
Srikatnh

Does the data transfer used in the back up in time capsule included in the data allowance from my service provider?

Is the data transfer used in the backup with airport time capsule included in the data allowance with my service provider?

gheefromsa wrote:
I am using Ethernet cable to connect TC to the modem. I am only backing up my mac book air within range of the TC. So I guess it will be OK from your reply. As a trial I did interrupt the back up by turning off the TC, disconnecting the Ethernet cable, turning TC back on. The mac would not connect wirelessly with the TC without the Ethernet connection.
It is not using ISP .. absolutely for sure. Well 99.999%.. absolute tends to be only in maths.
But you did the test wrongly.. I said to disconnect the modem.. during the backup.. not turn off the TC.. obviously once interrupted the TC will not work again until everything is plugged in.. but it will work even bridged for a short time.. just unplug the WAN port from the modem.
The test is moot now.. as I can give you a 99.999% promise it is not using ISP.

Create a abap server proxy and consume the service with the pi WS Navigator

hi all:
i create a abap server proxy ,i use the t_code "sproxy" to generate the proxy, and then write the abap code to implemente the method; then i use the T-code (soamanager) to define the endpoint, but when i click the " Open WSDL document for selected binding" to get the WSDL file ; some error occur,the error is follow:
==========================================================================
Service cannot be reached
What has happened?
URL http://foxxi:50000/sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system XIF with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:FOXXI_XIF_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
==========================================================================
when i go to the ws navigator to consume the service i can not find the service which i define, but some system content display , what's the problem

had a chance to look at this?
/people/jitender.chauhan/blog/2009/04/20/service-enabling-in-abap

In IMovie 11 9.04 my background music loses time when I transfer it to the slide show. How do I correct that?

I have a slide show project which runs about 7:10 minutes. I want to use background music that consists of 2 songs. The first song is 3:11 minutes and the second song is 4:51 minutes. Even when I add transitions and more images, the second song loses duration the moment I transfer it to the slide show. HOw do I adjust that?
Thank you.

thirais wrote:
… Files were created by soncy camcorder.
no Sony camcorder records in mp2.
years ago, there were DVDcorders ... encoding in mp2,, but wrapped into .vob - this can not be fixed with Perian
... sorry for being so ... stubborn, but my assumption is, your wrong diagnosis 'mp2' leads to an unnecessary, obsolete and painstaking long workflow. again, no camcorder on the market records in mp2 (as long as I stand corrected! )
so, what Sony model, please?
I guess, there's a much more conveniant way importing your videos ...

How to send the SOAP Fault Message to the Web Service Consumer

Hi,
I have configured SAOP to Proxy Syncronous Scenario in PI 7.1 and using XML Validation in Adapter Engine to Validate the Structure of the Message Payload.The scenario is working fine.When some of the Filed's Length increses the maxLength specified in the Data Type . We are getting the Following error.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1164)
My question is How does the Web Service Consumer can handle this Soap Server Error in the SOAP Fault.Or How can we provide a specific information like 'The value '123456789' of element 'CompanyCode' is not valid.It exceeds the Maximum Length'.
I read this /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client blog .Where it is mentioned that the Web Service Consumer can handle while calling the Web Service.Is there any other solution?
Kindly appreciate your help.

Thank You Stefan for your kind reply.
So you mean to say if we use the XML Validation .we cannot provide proper error information to the calling Web Service Consumer .And While calling a Web Service they cannot Extract the Exact Message in the Text Filed(<text>) present under the Detail Element (<detail>) in the <SOAP:Fault> node. as
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.**
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
That is why we have to use the Fault messages and Field Lengths has to be Validated in the Server proxy.
Please Correct me If I am wrong.

JAVA as the Client/Web Service consume XML

Working on a project at present and require to use JAVA as the client to consume XML from the Server to which i have coded in VB.NET. I have never used JAVA before and i am asking if anyone can point me in the right direction for this or give me an example of Client code in JAVA that consumes XML from the Server VB.net.
This is cross platform web service that i am working on which must include the following Client/Server one in say for instance JAVA client and VB.NET server which must consume the same text for instance XML, and then display the XML.
Thank You Beforehand
I am a Beginner. But i am willing to learn. There will be a chocolate bar in it for anyone who can point me in the correct direction. Got 3 days to complete, HELP

Any particular flavor of XML? (e.g., SOAP)

Is it possible to run steam as a service in the background?

Now that Steam In-Home streaming works from a Linux host, I was wondering if was possible to get Steam t run as a background service? The idea being that I simply need to boot the host computer and can then play games on my laptop elsewhere without needing to log into the host box - or start Steam on it manually.
Apart from possible performance issues, users on the host computer need not even be aware that Steam is running.
Can this be done?

MainStage is an application, not a plugin. So, no, it can't be used in Cubase.

How do you transfer a visual voicemail message to a Mac and then burn it on a CD or to a memory stick? The voicemail is on O2 service in the UK.

How do you transfer a visual voicemail message and save to a iMac and then burn it on a CD or to a memory stick? The voicemail is on O2 service in the UK.

Hi Julian,
Another query was: When I try to download a .pdf document from a webpage, the Quicktime app., opens it, instead of Adobe, or Preview! Hence I onlyu see one page of what could be several pages.
I tried the Apple Guru but they still haven't phoned me back!
Do you know what the problem could be?
Thanks.

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
<b>import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;</b>
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

Background Intelligent Transfer Service Consuming the Bandwidth

Similar Messages

Maybe you are looking for