Background job error No appropriate entry found in table ADRT

Hi,
I have developed a report to sent mail in background. My background job is getting cancelled in background. but it runs in foreground.I have used leave to transaction statement in my report.
In my development server job cancellation occurs.but mails are being sent.whereas in production server job cancellation ocurrs but mails are not sent.
It shows the below error also...
27.12.2010 17:00:00 Job started
27.12.2010 17:00:00 Step 001 started (program YSD_OUTSANDING, variant &0000000000094, user ID ABAPER)
27.12.2010 17:00:01 No appropriate entry found in table ADRT
27.12.2010 17:00:01 Job cancelled after system exception ERROR_MESSAGE
please help me to overcome this error...
Thanks & Regards,
A. Jenifer

I don't see how either of those replies are helpful...
To the OP, you haven't given much information. That's a custom program but the failure is being triggered most likely by your attempt to generate the email by the standard code. You need to get the error message ID and number from the log and find the codepoint (from a where-used analysis or debug) and analyze the condition that's triggering the message. Most likely, it's a simple fix - there appears to be a missing remakrk entry but sometimes those messages are misleading and the message issued isn't actually the problem.

Similar Messages

No appropriate entry found in table ADRT

Hi,
In XI T-Rfc (sm58) we get error --> No appropriate entry found in table ADRT
Kindly, suggest.
Akki.

Hi Akshay,
See the SAP Note Number: 983748
Regards,
Sarvesh

Error in Sales Order idoc - No appropriate entry found in table ADRT

Hello SAP Gurus,
When I am retriggering a sales order idoc I am getting the following error message.
No appropriate entry found in table ADRT
How can I resolve this issue.
Thanks,
Narayan.

Hello Lakshmipati,
I have checked up the customer master. There was no communication method maintained for any of the customers.
But even then the order idoc is triggered to our XI system.
For the one that failed I have maintained the communication method and retriggered again. It had the same failure message.
Any helpful thoughts is highly appreciated.
Thanks & Regards,
Narayan.

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@le

Hi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong

No entry found in table TTXD Calculation procedure with TAXCR

Hello,
Transaction FB01 F-02 and is sending me the following error, "No entry found in table TTXD Calculation procedure with TAXCR Message no. TAX_TXJCD106" requires me to turn jurisdiction code.
What I can do to avoid this problem?
Regards,

Hello,
You need to make sure the basic configuration is in place first, because I saw in my plain SAP environment, Costa Rica doesn't have a tax procedure assigned. I'm not familiar with Tax in CR as well. However, general rule of thumb for tax posting:
1. SPRO general settings - Set countries - Define countries in my SAP Systems
Assign the tax procedure TAXCR in country CR
2. SPRO FI global settings (New) - tax on sales/purchases - Basic settings - assign country to calc procedure
3. Define Tax Jurisdictions - TAXCR
4. Then Specify structure for tax jurisidiction code for TAXCR (This is the config content for table TTXD)
Regards,
WH

Background Job Error

I am defining background job in abap report i am facing the below error
Printer not suitable for job step; automatic output not possible.
Kindly suggest Immediately,
Best Regards,
kalees

The error was resolved, we are not assigned properly in variant.

DP background job error

Hi,
The Demand Planning background job step which is used to Delete the planning area is not working properly.
The error message "Process DP Background Processing, variant DELETE VP SALES VALUE_ANNUAL has status Ended with errors (instance D96Y8ITPW9HBSLX8CCXHKV displayed on the log.
What could be the possible reasons.
Thanks and regards
Murugesan

Issue resolved by assigning authorization to the background job user.

Background jobs error

Hi
I configured few background jobs , all are working except
SAP_WP_CACHE_RELOAD_FULL
program used here was RWP_RUNTIME_CACHE_RELOAD
VARIANT used is SAP&RELOAD_ALL
its giving error No Component system Choosen
It does not execute on the scheduled time , its status comes cancelled.
please advice.
Regards
Puneet

Could you please follow the note 16083
Cheers,
-Sunil

Batch Job creation by adding entries to SAP tables

Hi Experts,
I understand there are at least 4 SAP tables involved with Batch Jobs.
I need to create many variants and manually creating them using sm36 is tedious.
If I add entries in the TBTC* tables, can the batch jobs be created without causing inconsistency ?
The batch jobs are all similar, based on a zprogram that selects from sap tables data and updating to a ztable. There are many variants I need to create and assign to the batch jobs. So, if I can update the entries in the tables to achieve the same, it would be much quicker and reduce human error and make checking the job setup faster and easier.
Please advise.
regards
M Russo

Hi,
There are many function modules which helps you to create the variants.
You need to create a simple report to automate your variant creation and batch submission.
use function module RS_CREATE_VARIANT to create variant use the structure RSPARAMS to specify the value of your selection screens
Go to the function group BTCH . Use JOB open close to submit the batch jobs with variants anor any ther fm in the BTCH function goup.
Hope this helps rather than directly writing to tables.
Thanks

How to schedule a job poles for a entry in a table.

Hi All ,
I have to schedule a job which runs somw stored procedures only on sunday and monday of a week at 3 AM in the morning.
The condition is that another application puts an entry into a table around 3 AM (some times before and some times late), now my should query
count in the table and runs the procs , however once its done ,it should do it monday and then it should not run till next sunday.
I have successfully created a job which keeps failing till it receives the entry and successfully runs the proc once the entry is there...
However how to schedule this thing ..correctly I need help , I want this job to disable itself on sunday once the procs are run wake up next morning
run again..and then next week ..
Following is the job ,
BEGIN
-- Job defined entirely by the CREATE JOB procedure.
DBMS_SCHEDULER.create_job (
job_name => 'TESTING_FIRST_JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN SEODS.test_procedure_11292011(); END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'freq=minutely; byminute=5',
end_date => NULL,
enabled => TRUE,
comments => 'Job defined entirely by the CREATE JOB procedure.');
end;
=====================================================
and following is the proc...
create or replace
procedure
test_procedure_11292011 as
var number;
begin
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS STARTED SUCCESSFULLY');
commit;
SELECT COUNT(*)
INTO var
FROM seods.student_weekend_status;
if var=0 then
raise_application_error(-20101, 'There is no record in the student_weekend_status table');
else
all_realtime();
end if;
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS FINISHED SUCCESSFULLY');
commit;
end;
Thanks in advance , please help

Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support

AA - Error Message: No data found in table j_1aat089 for depreciation area

Hi friends,
I am trying to execute ABAW transaction but I recieved the below error:
"No data found in table j_1aat089 for depreciation area 00."
Message no. 8Z874
But Area 00 there is not configurate in my system.
Does anyone has any hint regarding this issue?
Thanks
Daniel Dorta

Hi Daniel,
You are not using Inflation funcitonality, are not you? Check that in IMG - Financial Accounting (New) - Financial Accounting Global Settings (New) - Inflation Accounting - Inflation Methods - Assign Inflation Methods to Company Codes your company code is not assigned to any inflation methods.
Regards,
Eli

Error message 'No entry in the table T589A for P 2'

Hi all,
I am updating the field of an infotype using the function module 'HR_INFOTYPE_OPERATION'. But the function module is not updating the field. Instead the return key of the function module has the message
'No entry in the table T589A for P2'. The function module is called as follows:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '9900'
    number                 = wf_pernr
    SUBTYPE                = P9900-SUBTY
OBJECTID               =
LOCKINDICATOR          =
    VALIDITYEND            = P9900-ENDDA
    VALIDITYBEGIN          = P9900-BEGDA
RECORDNUMBER           =
    record                 = p9900
    operation              = 'MOD'
TCLAS                  = 'A'
   DIALOG_MODE            = '0'
   NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = wf_return
   KEY                    = wf_key
Please suggest.
regrds,
madhu

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

RAR 5.2: Background Job Error

During the Full sync jobs after installation of RAR 5.2, the User and Role jobs complete successfully, but during the profiles job it stops with an error.
Please find the log entries and any tips are highly appreciated.
Thanks:
INFO: Job ID:7 : 7 out of 5290 (0%) done
19-Aug-2008 20:15:14 com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 7 Status: Running
19-Aug-2008 20:15:14 com.virsa.cc.xsys.riskanalysis.AnalysisEngine
performActPermAnalysis
INFO: Job ID:7 : Before GC => memory usage: free=391M, total=981M
19-Aug-2008 20:15:14 com.virsa.cc.xsys.riskanalysis.AnalysisEngine
performActPermAnalysis
INFO: Job ID:7 : Analysis starts: &_SAP_ALL_7
19-Aug-2008 20:15:14 com.virsa.cc.xsys.meng.MatchingEngine getObjActionsINFO: -
allAreExclude=>true----
19-Aug-2008 20:15:14 com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 0ms, #singles=1, #ranges=0, #super=119-Aug-2008 20:15:15 com.virsa.cc.xsys.riskanalysis.AnalysisEngine
insertAllTcodeACTVL
WARNING: Job ID:7 : Exception: Missing IN or OUT parameter at index::
13, SQL State: null
java.sql.SQLException: Missing IN or OUT parameter at index:: 13
at
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)

This could be due to data issue or wrong RTA SP level. Please check with GRC support.
Thanks
Prem

Background job error as runtimr error OBJECTS_OBJREF_NOT_ASSIGNED

Hi All
when I schedule BDC in Background by giving job name in SM36 .
It is giving an exception error as runtimr error OBJECTS_OBJREF_NOT_ASSIGNED.
But it is working fine when i running with options 'N' & 'A' in call transaction.
Flat file is placed on application server.

https://www.sdn.sap.com/irj/sdn/advancedsearch?query=objects_objref_not_assigned&cat=sdn_all
You Need to find out the SAP note from the given list

Background job error No appropriate entry found in table ADRT

Similar Messages

Maybe you are looking for