Background job not showing full output of Report

Dear Experts
we have created zpgm for stad report and try to take output as mail to particular user for future analysis bcaz stad gives only 2 days report only we need keep report for months together so when we run job in foreground it shows proper output but when same thing when we run from background it shows only some part of report in mail (we are unable to get full output through background job )
we send mail through spool receipts we have created folder and maintain user for getting mails through so15 distribution list
we need some input to come out of this major issue
if there is any other workaround let me know
Regards

Hello,
If a job is defined by transaction SM36, the print format parameters will only be taken into account, if they are saved as user specific print parameters of the batch user. If no user specific print format
is defined, the ALV standard logic will be processed adjusting the print format to the actual line size of the report.
For example, the list line size is about 132 characters, the widest available format of the chosen printer will be selected X_65_132.
The problem would be solved by defining a device type which is no format assigned to print, or by defining user specific print format parameters for the batch user, who creates the jobs in SM36 (see
SAP note 1179399, item 6).
Regards,
David

Similar Messages

Schduling background jobs not showing in sm37

Hi,
I scheduled the jobs : Z_MM_INVENTORY_REPORT, RM07MLBS on daily basis from 03/22/2011.Its running successfully upto 03/26/2011 daily,after that when iam checking on SM37 from 03/27/2011 to 03/31/2011 it showing schduled on 03/27/2011 not running. and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
what could may be the reason for not running that jobs.
Thanku

What is the status of the Job in SM37 ?
and on
and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
The periodical jobs create the next job, when the current job changes is status from Released to Active. Since your Job on 27th is having some issue, the Job for 28th has not been created, simillarly the rest.
Regards,
Sanujit

Report not showing proper output in apps 11i

Hi,
I am new to oracle Apps 11i. I Have created customized reports . But Layout showing in builder and oracle apps 11i are different. The differernce is distance between the fields. Also labels and fields not showing full (truncating) value. But the same report giving proper output in repots6i builder.
(i.e all customized reports layout showing 1/2 the width in oracle apps 11i)
I will appreciate if somebody can give me some suggetion regarding this issue. Also I would like to know any template avaliable for 11i reports development.
Regards

hi,
please make sure that in report builder fields must not contain any bold text , any line or any color b'coz apps11i reports are character mode reports hence if ur report contain any of these mentioned above give format different from the one it shows in report builder. u have to add one by one field and and run the report in apps environment .. in this way u have to move forward... guess it will help u....

Excel is not showing multiple Drill thru report selection option

We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
essbase 7.1.6 version SQl server 2000

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

Gradient filled background is not showing up in Internet Explorer on a PC.

My gradient filled background is not showing up in Internet Explorer on a PC.
I'm working on a MAC, so I don't know of anyway to preview a new MUSE Site in I.E. since it's no longer supported on a Mac.
When the Home Page is viewed, my blue sky gradient background shows up as a white box?? I need a fix for this please.
Here is my url: www.ThanksSanta.org

Hello,
We might have to look into your .muse file to have a better look into the issue.
I tried it on a sample file but it worked fine for me.
Could you please e-mail your .muse file on [email protected] You can use Adobe SendNow service (https://sendnow.acrobat.com/) to send your file in case it is larger than 20MB.
Please do not forget to mention the link to this forum in your e-mail.
Regards,
Sachin

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

Background does not show up when creating a PDF in InDesign

I have placed the same image in Illustrator and the PDF does show up the image.

Ooh. Ok. Thank you! I'm using InDesign CS5.5, Acrobat 10.1.6. Mac OSX (10.6.8).
Layer 1: background (TIFF): does not show up
Layer 2: Type and logos (EPS): do show up in my pdf.
-When I select Overprint Preview in Indesign the background is missing.
-I have created pdfs in different presets (smallest, high quality, etc) and still background does not show up.
-When I place ONLY the background on a new InDesign document, it does show up in the PDF.
-I have created a pdf with the background in Illustrator and it does show in my PDF.
Thanks!

On myspace home page and inbox page it will not show full page it is in the center,hard to read

MY MYSPACE HOME PAGE AND INBOX PAGE IS NOT SHOWING FULL PAGE...ALL GONE TO THE CENTER
== URL of affected sites ==
http:// www.myspace.com/orangebyrd

I did control and 0 and it worked,,thanks,thanks,thanks... (first time I did it wrong I hit ctr 1 and 0...)...Oh I am so glad I have it fixed ,cannot thank you enough..........Jean
WOW, I am so thrilled to get it back to normal...whoever helped me God Bless You...

I have IE 11 not showing full url ]

I have a problem with IE 11 not showing full URL ] path.
Win 7 64 bit i7 2700K @380GHZ 800.GB RAM ATI 7970 3GB DDR5. Liquid Cooled 5 Fans 3 x 22inch Monitors 850 Watt Power Supply
For some reason the full URL ] on some sites will not show up.
I have opened Fire Fox and it shows the full URL ] but not in IE 11 ]
I have reset to default settings and it still is not showing up the full URL ]
Also it is not showing all the fav icons on my favourites bar only the stock explorer icon
What have I tried.
Resetting to default / Tools / Options / Advanced / Show full url and http .
none of this is working.

Hi,
What do you mean by "I have a problem with IE 11 not showing full URL ] path."? Could you please give us a snapshot for better understanding?
I would suggest you lauch IE by running
iexplore.exe -extoff
and check the result.
Please keep us updated.
Regards
Yolanda Zhu
TechNet Community Support

Run the Report as a Background job and Get the Output in Excel in Local PC

Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
Varlanir

GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.

BI Publisher "Report Job" not showing job continously searching

Hi Experts,
I'm facing problem while schedule job in Oracle BI Publisher, I successfully schedule job (for bursting) and its running 3 or 4 days continuously, as a result got the report by email but after that I don't get any email, even no error message by email as well. when I go to "Report Job" it showing no data and continuously searching, showing "Fetching Jobs Data....." right top of the page
Administration>Scheduler Configuration
Scheduler = Quartz
Administration>Scheduler Diagnostics
Result = Passed
Oracle BI Publisher 11.1.1.6.0

Ok, you cannot see report scheduler information, report history if scheduler is down or hung.
1. How many reports are simultaneously scheduled to run?
2. How do you rate the size of the scheduled reports? Based on number of rows it generates - Small? Medium? or Large?
Looks like BI Publisher is not able to push jobs into the scheduler queue.
Please check BIP scheduler database table "QRTZ_FIRED_TRIGGERS" to see any running or pending jobs.
You will come to the root cause of the issue by setting the BIP log level to trace:32
http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/diagnostics.htm#BIPAD343
or configure xdodebug
https://blogs.oracle.com/xmlpublisher/entry/get_logging
Take next action steps based on the error/warning that will be captured in the log files during the time of scheduling
You can also consider the following but I would prefer to check the log files first
Please try this at your BIP server side
1. Increase Java Heapsize if it is less
2. Increase BIP Scheduler Database size
3. Clear server cache and scheduler database transaction logs

RAR5.3 - SoD Report Not Showing Full Risk Description

Hello,
In a Sandbox environment, I'm playing around with/testing a new ruleset. The environment has our Production ruleset and I've added some risks to this ruleset via file upload in Configuration. The risks look great. Both the description and detailed description got imported correctly. The rules generated perfectly for these new risks I uploaded. Everything related to the risk, the way the risk is built, the rules, looks perfect. When I run Risk Analysis on test users that I know have the risk, they show on the report just as expected. However, the risk "description" is essentially missing. For example, in Management Summary View, here is what Risk B001* looks like:
B001: Basis Development & System Administration
Medium Basis TEST_USER(TEST_USER) USSPCJH40_E3
I've bolded the Risk Description.
However, here is what one of my new risks shows up like (F031, a risk we haven't put in production yet for various reasons):
F031: F031
Medium Finance TEST_USER(TEST_USER) USSPCJH40_E3
The Risk Description only says "F031." It still is hyperlinked so it still works, but I want to see the full Risk Description, obviously. When I look at the Risk in Rule Architect, both descriptions are there.
I then extracted the Rules via Rule Export and looked in the VIRSA_CC_RISKT table - the F031 description is there!
B001 (which looks fine) and F031 (which has the description missing) has entries in ALL of the same tables (unless there's a table that I'm not getting with the export?)
Can anyone help me out? Has anyone experienced a similiar issue? Why would all my newly imported risks not show a Risk Description when running Risk Analysis?
Thanks in advance!
Jes Behrens
Edited by: Jes Behrens on Feb 26, 2009 8:26 AM

Hi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks

Project Plan cost report - not showing any output.

Dear Experts,
I have created several projects and done the planning. I have used work centers and activity types for manpower cost planning. Also created some PRs against the project.
When I goto the network activities and select the line item in the menu path Edit - costs - Planned/Actual - cost planned /actual
It shows me the planned cost of the activity correctly.
But when I am running the report CJI4, it shows nothing. The report is not at all executing.
I dont understand why it's \not showing.
I have checked the control key PS01 for the cost field is enabled (tick available on the cost friled)
Can any one please help me??
Thanks and Regards,
Praveen

1) Please check that the WBS element is integrated in plan, and the plan integration is fully activated in the project.
2) Plan line items are only written in certain cases.
The following rules are valid:
1. Plan line items can be written in
a) structure-oriented cost planning CJ40 (total values, annual values),
b) cost planning on orders KO12,
c) unit costing independent of cost elements,
d) structure-oriented revenue planning CJ42 (total values, annual values)
e) structure-oriented financial budgeting CJ48 (total values, annual values, period values)
f) primary cost planning,
g) activity planning,
h) revenue element planning.
2. Plan line items are never written in
a) Unit costing on cost element level
b) Network costing
3. Line items are only written if a user status permits the business transaction 'Write plan line items' explicitly.
Exception:
For plan-integrated WBS elements and orders, line items are written in cost-element oriented planning if integrated corporate planning is activated in the fiscal-year parameters of the respective plan version, regardless of the user status.
4. Plan line items for structure-oriented planning can only be displayed in the respective planning transaction under menu option "Extras-->Line items".
Let me know if this was useful
Ritesh

Out put in Background (SM37) not showing All columns

Hi Folks,
Im creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->spool ->view (display).
Why its happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Background job not automatically poopulating Dependant Demand

Hi Users,
We've recently set up a POS & PA using the DP-BOM selection and characteristics, manually created PPM's and generated CVC's using the BOMS. All of this is set up fine in our SCM 7.0.
The background job has created the forecasts for the ouptput products but NOT the input product.
Now if I call up the parent material, and then choose to show the input products the dependant demand is generated. If I now return to the material with the dependant demand, it now shows the demand from the parent.
Or, if the forecast is genereated interactively, then the dependant demand is poopulated.
Is there an automated method to populate the dependant demand when using background jobs? I would like to think that we don't have to query every sales BOM parent in DP and drill into the input products to load the dependant demand?
Please let me know if there is an easier way to do this as part of the background processing.
Thanks
Edited by: Paul_111 on Mar 31, 2011 4:20 PM

Hi Andand,
Thanks for your reply and sorry if my post is confusing.
As far as the PPM with imputs A & B, output C - I have this relationship working and calcuclating demand in DP no problems.
If I now add a new PPM combination inpput X, Y and output Z. Create the BOM CVC and TSO so its all set to go. Add to selection profiles and background jobs.
Now, if I run the background job to create the forecast and this runs successfully. Now I check my products.
Z has the forecast generated, X & Z have no dependant demand showing.
The only way I've found that pushes the demand to X & Z is:
- open product Z in demand planning and then choose the option to show input products from the header
OR - from demand planning, select the univariate forecast to run interactively.
My issue:
The background job (if run alone) does not push the forecast on Z to X & Y.
And if I show the input products or create forecast (as bove) the dependat demand is shown on X & Y.
This is going to be a slow process if we have to do this everytime we run the backgound job.
What am I missing when running the background job?

Background job not showing full output of Report

Similar Messages

Maybe you are looking for