Backing Up Not Complete when Backing Up to a Network Drive ~ Windows XP & 7

I'm getting ready to install Ubuntu onto my two Toshiba Satellite computer's (both NTFS Formats) and in preparation I'm backing up my personal files to my Network Hard Drive (NTFS Format also). I've tried different methods of backing up from my Windows 7 & XP laptops to my Buffalo Hard Drive on my home network such as using Sync Back, copying & pasting within Windows. I'm attempting to copy my entire user folder from Windows to the Buffalo and Sync back fails and the copy and paste function fails as well. I only seem to get about 200mb of 102gigs I select.
I decided to change from copying and pasting the whole user folder to copying and pasting the entire contents of my user folder and that seems to work for the most part. The only thing is that I constantly get these pop up messages asking if I want to try that file/folder again or skip it and go to the next one (they also include a check box that tells Windows to do the same function for the next question). With this happening, I don't know if I'm copying all my information and I'm not sure what is missing.
What do you think? Do you know of a better way without going out and buying an expensive program. I'm trying to keep this as simple as possible and accurate/complete. Thanks for your time.
Bob

You may, of course, also search for Microsoft help at Microsoft
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

Similar Messages

ITunes wil not download iTunes Store purchases to my network drive

I have iTunes 8.2.1.6 loaded. I can't remember when the last upgrade came through and not sure when the downloads to my network drive stopped working, but they used to work.
I first set-up iTunes on my Win XP laptop in January 2008. I already had my network set-up at home and had been storing my music and media on a network drive for long before that. Initially everything was fine, iTunes connected and created the library. It also allowed me to download from the store directly to my mapped network drive.
The library still works and still picks up all the music and media from my network drive. The problem is, whenever I try to purchase from iTunes Store, the download fails and says the disk is full (it's not - there's 70GB left on it). If I set my iTunes Music Folder location to be local C: drive, it downloads with no issue. Problem is I only have between 2 and 5GB left on my C: drive and it's only a 30GB drive to begin with, so way too small for my library.
Recently (July) I purchased a TV Episode from iTunes Store. It tried to download 6 separate instances, every one failed. When I switched my iTunes Music Folder location to C:, it finally downloaded. I switched my folder location back to the network on completion and manually moved the TV episode to the network (it was a HD+SD download, so multiple copies, and the meta data / library entry now seems to be screwed!).
Today I have tried to download an album and I get the same error about the network disk being full! This is too much hassle and not endearing me in anyway to Apple!
If anyone has any ideas as to how I might resolve this, I'd be very grateful.
Cheers

I am having a similar problem for 3 weeks now, and wasted hours messing with our Firewall software, etc. thinking that was the problem. Thanks to your post I tried changing the Itunes Music Folder location temporarily to our C: drive, and voila-- suddenly downloads can be completed. We choose to keep our Itunes library folder on a separate networked hard drive, and ever since we updated to Itunes 8.2.1.6 we've been unable to download purchased music to this drive. We had no problems for the last 2 years with previous versions of Itunes & our preference configurations for the library. The error message I got when I tried to download purchased content (both music & video) was "error (-48) unknown error. unable to complete download... check network connection and try again". Of course our PC WAS connected to the internet, and I could access the Store and download from other websites, just not Itunes.
Could this be related?? : Looking in my Itunes folder in the networked drive, I tried to delete the Downloads folder (after reading a suggestion in a forum to delete purchased music files if they were partially downloaded, and then try to download them again). I have been unable to delete or rename this folder, getting this error message: "Cannot delete Downloads. The file or directory is corrupted & unreadable".
A separate, Itunes bug related to Music Folder location-- we also had a major problem trying to get the location of all our music properly identified in Itunes library with this latest software version. We had to wipe our C: hard-drive due to a virus, and when we downloaded the updated Itunes software & set the preferences to point to the library on our networked drive, it isn't properly identifying thousands of the files (we have ~10,000 songs. The "Consolidate files" feature is very buggy, and only worked for maybe 1/5 of the files before stopping. We don't want to keep trying to run it, because we are afraid we'll end up with even more duplicate "ghost" files than we have now ("Unable to locate file" under "Get info" the "where" field is blank. We've had to manually load folders from the networked hard drive one by one, using the
"Add Folder to Library" feature. This is taking forever, as this needs to be done for 100's of artist folders, then we have to delete the duplicate music files that still appear in the library!!
Info on our computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Manufacturer Gateway
System Model MS-6741
System Type X86-based PC
Processor x86 Family 15 Model 12 Stepping 0 AuthenticAMD ~2400 Mhz
BIOS Version/Date American Megatrends Inc. Version 07.00T, 4/2/2001
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpspsp2rtm.040803-2158)"
User Name STHCPA-GAILS\Owner
Time Zone Eastern Daylight Time
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.18 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.78 GB
Page File C:\pagefile.sys

I downloaded 9 songs and 2 of them are not complete when I play my IPOD they play 3/4's then end., I downloaded 9 songs and 2 of them are not complete when I play my IPOD they play 3/4's then end.

I dowloaded 9 songs and 2 of them are not not complete when I play them on my IPOD Classic the songs play then 3/4's of the way they end.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

How do use Time Machine to back up to my network drive?

I have been dealing with this issue for days. When I had bought my MacBook Pro a couple of weeks ago I figured Id try and back it up to my 1.5tb Western Digital HD that's plugged into the USB port on my router. I Have connected to it through finder and can access it fine however my main point in getting to it is to back up my MacBook with Time Machine over the air to the external HD. I have researched and tried many tricks such as running codes in finder to create a "sparsebundle" using the code " hdiutil create -size 100g -fs HFS+J -volname "Time Machine" COMPUTERNAME_XXXXXXXXXXXX.sparsebundle " in Terminal. I was able to succeed in creating one but my problem comes when I want to transfer it to the network drive. I use the code " rsync -aE COMPUTERNAME_XXXXXXXXXXXX.sparsebundle /Volumes/NETWORKDRIVE/ ". However I get error codes such as "file could not be transferred (23)" and "no file or directory (2)". Also before I did all of these steps I made sure to make network drives discoverable in Time Machine by running the code " defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1 " in Terminal. However without using the trick that I keep getting errors with Time Machine gets error message 45 when attempting to back up to the Network Drive straight after making the Drive discoverable. I know Apple niched Time Machine back ups on network drives after or toward the end of Leopard and thats why it is so hard to do it now but I was hoping someone can aid me in my never ending problem?

Hi Barney
What format is the drive on the router? It has to be HFS+ (Extended, journaled).
Sorry Barney, that's not correct in this context. The user must create an HFS+ sparse bundle and then upload it to the network drive. The network drive will be formatted as its formatted.
I also believe it has to be an Apple Airport Extreme router.
Again, that is not the case. I am successfully using Time Machine to an Iomega network drive for the last 12 months. No issues at all.
However, you are making your backup completely unreliable.
There may be an element of truth to this, however, I have used the "Star Wars" interface to recover individual files directly. If I should need to perform a larger recovery and for some reason I can't get the usual access through Apple software, I have established that I can directly access the sparse bundle on the drive and mount it on the computer. Once there, I can just copy files directly from it. The sparse bundle folder structure makes it easy to get the latest version of every file with a couple of mouse drags. This means that I will always be able to get access to my backups.
Apple nixed it because they couldn't get it to work reliably. I imagine they only support that sort of thing on their own Time Capsule because they can control the wireless transmission and error checking (and they sold TCs specifically for that purpose).
I don't know why Apple nixed it - I've had zero problems with this configuration and it is by far the most sensible way to use Time Machine. It seems completely pointless to have a portable MacBook and then have to physically connect a drive to it permanently for backup purposes.
I've only had personal experience with the Iomega drive - maybe it only works with a limited number of manufacturers?
Bob
Message was edited by: Bob Lang1

Could not complete your iTunes Store request. Network connectiontimed out.

When I try to connect to the iTunes store or my iPhone apps folder I get the message "Could not complete your iTunes Store request. Network connection timed out."
I have been to iTunes help on this topic and have read many threads in the forum with similar error messages and tried every fix I could find with no result.
I am connected to the internet just fine. I do not have Norton on my computer. I am pasting the diagnostic report I got below. Apparently the problem has something to do with the secure connection. Any ideas anyone?
Microsoft Windows Vista x64 Professional Service Pack 1 (Build 6001)
System manufacturer System Product Name
iTunes 8.0.2.20
QuickTime 7.6
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 73EC0B88F76E7B69
Current user is an administrator.
The current local date and time is 2009-03-07 11:57:26.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 2600 XT
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {1AEC2697-06FB-4DA2-9E0C-E43959AB680A}
Description: Realtek RTL8168C(P)/8111C(P) Family PCI-E GBE NIC
IP Address: 192.168.1.104
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Mar 10 11:26:48 2009
Lease Expires: Wed Mar 11 11:26:48 2009
DNS Servers: 148.78.249.200
148.78.249.200
148.78.249.201
Adapter Name: {7CAEF5F2-16C4-42D9-9F5C-CA0769D31572}
Description: Hamachi Network Interface
IP Address: 5.22.11.191
Subnet Mask: 255.0.0.0
Default Gateway: 5.0.0.1
DHCP Enabled: Yes
DHCP Server: 5.0.0.1
Lease Obtained: Tue Mar 10 11:28:55 2009
Lease Expires: Wed Mar 10 10:28:55 2010
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-03-10 12:33:58.

I found out how to sign up!

TS2690 we could not complete your itunes store request. the network connection could not be established

we could not complete your itunes store request. the network connection could not be established

Hello ,
you can try to sign out of your apple account then sign in again.

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

My iPhone 5 is not dectecting when i connect it to iTunes on windows; what should I do to resolve this problem?, My iPhone 5 is not dectectong when i connect it to iTunes on windows; what should I do to resolve this problem?

My iPhone 5 is not dectecting when i connect it to iTunes on windows; what should I do to resolve this problem? I have restored my device and also installed new itunes.

What happened when you tried to update? Are you seeing an error message?
~Lyssa

Error 0x800704b3 when trying to map a network drive

Hi there,
I have the following error when trying to map a network drive in my home network:
"\\iomegahmd can not be reached" and the error code is 0x800704b3.
I already looked into the services, and my strong assumption is that the problem is that the service "TCP/IP NetBIOS Helper" is not statrted and it is disabled. When I try to start it, there is an error message:
"The system could not find the path specified".
I've also checked the dependency components of the service "TCP/IP NetBIOS Helper":
Ancillary Function Driver for Winsock
NetBT
TCP/IP-Protocol driver
NetIO-Legacy-TDI Support driver
in the device manager if they are running, but they are all running. The start is set to "System".
Under the TCP/IP Internet version 4 properties of the wireless device, under Advanced -> WINS Ive set Enable NetBIOS over TCP/IP, but it didnt help either.
What else could I try, so that I can map network drives?
I should also mention, that the problem persist since some week ago. Before it, it was properly functioning. Also, on the other computers in my networks I do not have problem accessing the same network drive.
Thanks in advance,
Dime

> I should also mention, that the problem persist since some week ago. Before it, it was properly functioning.
Its difficult to say whats wrong in your case. My first idea is: set the system to early time point before this error appeared.
I would also recommend to disable all the security software and check if you come across the same problem.
If you still face the issue, then follow the link to fix the corrupted user profile.
http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

Delay when opening QT files on network drives

This is on Windows XP, QuickTime 7 Pro...
When I try to open any QuickTime-associated file, if that file's on a network drive, there's a delay of at least 30 seconds before the QT player opens and is ready to play the file (during the delay, there's little or no apparent network or disk activity).
It's not caused by a slow network, because when I open AVI or WMV files of similar sizes on the same network drive, Windows Media Player opens and starts to play them within a second or two.
It's not caused by my anti-virus software, because the same thing happens even if I've disabled the anti-virus software.
It's also not a general QuickTime problem because if I copy the file to my local drive and then open that copy, the QT player opens right away.
It does seem to be related to the underlying QuickTime system (rather than the higher level player), because the delay also happens if I assign Real Player to open MOV files instead of the QT player. The only difference is that instead of NOTHING happening for 30 seconds, the Real Player window opens immediately but doesn't show any video and is unresponsive until the file starts playing 30+ seconds later.
I went into the QT control panel and fiddled with the streaming and advanced settings, but nothing seems to help.
Is this a known problem and if so what's the solution?

I use a 10/100 ethernet network and notice a slight difference (but not 30 seconds) as compared to "local" files. The same happens with nearly any other file format.
On internal HD's on the network (Mac and PC) I get the slight delay. A Firewire drive on the same network seems to be about normal.
Try this:
Set the QuickTime "cache" (QT Control Panel/Advanced tab) large enough to keep a copy.
Use your current method to open the QT file (waiting if needed).
Use the QuickTime "Favorites" menu to "bookmark" the file.
Quit and relaunch QuickTime and try opening from the Favorites menu.
Quicker?
Empty the QT "cache" and try from the Favorites menu again.

Have renewed my ExportPDF Subscription, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Have renewed my ExportPDF Subscription, have the confirmation email, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Hi azza675,
ExportPDF converts PDF files to Word and Excel formats (and several others). What you describe, sounds like you're trying to convert a file *to* PDF. Did you ever start a trial of Acrobat, perhaps? (Whereas you can create PDFs with Acrobat, ExportPDF doesn't let you convert files to PDF.)
What happens when you log in directly to ExportPDF at https://cloud.acrobat.com/exportpdf?
Best,
Sara

Hyper-v Live Migration not completing when using VM with large RAM

hi,
i have a two node server 2012 R2 cluster hyper-v which uses 100GB CSV, and 128GB RAM across 2 physical CPU's (approx 7.1GB used when the VM is not booted), and 1 VM running windows 7 which has 64GB RAM assigned, the VHD size is around 21GB and the BIN file
is 64GB (by the way do we have to have that, can we get rid of the BIN file?).
NUMA is enabled on both servers, when I attempt to live migrate i get event 1155 in the cluster events, the LM starts and gets into 60 something % but then fails. the event details are "The pending move for the role 'New Virtual Machine' did not complete."
however, when i lower the amount of RAM assigned to the VM to around 56GB (56+7 = 63GB) the LM seems to work, any amount of RAM below this allows LM to succeed, but it seems if the total used RAM from the physical server (including that used for the
VMs) is 64GB or above, the LM fails.... coincidence since the server has 64GB per CPU.....
why would this be?
many thanks
Steve

Hi,
I turned NUMA spanning off on both servers in the cluster - I assigned 62 GB, 64GB and 88GB and each time the VM started up no problems. with 62GB LM completed, but I cant get LM to complete with 64GB+.
my server is a HP DL380 G8, it has the latest BIOS (I just updated it today as it was a couple of months behind), i cant see any settings in BIOS relating to NUMA so i'm guessing it is enabled and cant be changed.
if i run the cmdlt as admin I get ProcessorsAvailability : {0, 0, 0, 0...}
if i run it as standard user i get ProcessorsAvailability
my memory and CPU config are as follows, hyper-threading is enabled for the CPU but I dont
think that would make a difference?
Processor 1 1 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 4 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 9 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 12 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 1 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 4 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 9 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 12 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor Name
Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Processor Status
OK
Processor Speed
2400 MHz
Execution Technology
12/12 cores; 24 threads
Memory Technology
64-bit Capable
Internal L1 cache
384 KB
Internal L2 cache
3072 KB
Internal L3 cache
30720 KB
Processor 2
Processor Name
Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Processor Status
OK
Processor Speed
2400 MHz
Execution Technology
12/12 cores; 24 threads
Memory Technology
64-bit Capable
Internal L1 cache
384 KB
Internal L2 cache
3072 KB
Internal L3 cache
30720 KB
thanks
Steve

Address not completed when pressing enter key (address field)

In older versions of TB you could type the beginning (two or thress chars) of an email address and then enter. TB would autocomplete this our with the help of your address book.
Nowadays (31.4.0) there is no auto completion when you press enter. Instead you have to type some chars and wait till Thunderbird makes a suggestion and then you can press enter. That means an annoying delay.
I would be glad if there would be a fix that enables the enter key again so that it forces an autocomplete action in the address bar.

Hi,
I am not sure what after submit processes you have for this page, but if the page was generated with the forms wizard you will have Process Row of <table> process conditional on a SAVE request and a unconditional branch to take you to the previous page.
What is happening is that the page processing skips the Process Row because it is not a SAVE request and then branches to the previous page.
I would try creating another after submit process creating a "auto row processing" data manipulation process to update the row conditional on Request=Expression 1 where expression1 is the name of your page item.
If you do not want the page to branch to the previous page create another page branch to the current page before the unconditional branch using the same condition.

While playing tv shows offline, an error message pops up. "we could not complete your itunes store request. the network connection could not be established. there was an error in the itunes store. please try again". It interrupts the viewing

I'm running Leopard and whatever the latest iTunes is. Any help appreciated.

I've got an Apple ID problem, too. All of the sudden in the midnight between August 31st and September 1st, the new apps I picked up on the App Store hung forever 'Waiting..' in my iPhone and never turned 'Loading'. When a substantial amont of time had passed, they reported, they 'could not connect to the App Store' and .. disappeared! Well what they told was not perfectly true because I could however connect to the store as I could browse and pick the apps, but the apps just didn't load. I tried to log into my account in iTunes on my Windows 7 laptop, too, and there got exactly the message in the topic title.
It appeared later my Apple ID did not completely fail because when I switched from my home WiFi to the phone 3G, everything worked just as nothing happened. Logically, this intimated my WiFi had flaws. Or, some place between my WiFi router and Apple servers did, to be precise. My router was not to blame because I did no changes to it whatsoever.
All right, it is Saturday today and my ISP is running in unmanned mode meaning no hotline, but I call them on Monday unless the problem disappears by itself. I just wonder what I say, because from non-i-world point of view everything works well, and I know for sure guys in the ISP support don't own any i-stuff, (because they are all android fanatics) . I'm not telling them my Apple ID to let them reproduce the problem on their home equipment, which means I come almost totally proofless.

We could not complete your itunes store request. the network connection was reset.

When I try to play the movie I rented it says this: "We could not complete your itunes store request. The network connection was reset. Make sure your network connection is active and please try again." My connection is fine, how do I fix this?

The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
Argh!

Backing Up Not Complete when Backing Up to a Network Drive ~ Windows XP & 7

Similar Messages

Maybe you are looking for