Backingup and Restoring CMS and Auditing Database
We have a senario where out database server is completely down , we are unable to start services on SQL Server and it is not possible to restore them. Now we have our CMS and Auditing databases on that database. We have access to the file system from which we can take mdf and ldf files and restore the same to a new database. But CMS database cannot be restored in that way. How can i restore the CMS to original state. We also have a backup for those databases i.e., .bak file. Please help
Anil,
You should be able to copy the *.MDF & *.LDF set from one SQL Server to another and mount them on another working SQL server. Once you have validated the SQL Server database is mounted properly simple update the ODBC on the BOBJ box to point to the new server. Make sure the ODBC name stays the same.
You problem is more related to back and restore/recover of SQL Server.
Regards,
Ajay
Similar Messages
-
I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in her name?
thanks
DaveThe process is as follows:
Backup the phone, Erase it, connect to iTunes for the unlock process, then your iProfile can be restored.
You can go ahead and get the SIM, bout you have to Erase the phone and connect to iTunes before it will be unlocked. -
My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back?
type HT4097 in the search bar. its unable to update or restore iOS. Follow the instructions and if that does not work then id go to the local apple store.
-
so i cant download itunes cuz of some patenting control on the computer and i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just did the update for my apple TV and it got halfway through the update the TV screen showed a itunes logo and a plug in cord and wouldnt respond. I unplugged it and plugged it into my computer to try and restore it and now I can get audio but no vide
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
I backed up my iphone via icloud and restored it and lost dates notes photos anyone help
i backed up my iphone via icloud and restored it and lost dates notes photos anyone help
i backed it up to icloud and pc. but when i went to restore i got sum contacts back but not the latiest contacts. and no photos and notes gone. but i did notice that that bk up date was changing is there anyway i can look at all the back ups ????
-
i just recently bought a phone off craigs list from someone else and they didnt restore it so i tried to plug it in and restore it and it said the "apple mobile device is not started" what does that mean? and what can i do?
You must be running Windows. AMD is a service that needs to be running in order to sync your phone. You need to start it as described here: http://support.apple.com/kb/ts1567.
-
How do I backup and restore library and playlists?
I have 14 days left on my Win 7 trial version and now need to backup itunes. In the advance itunes preferences tab I have my music folder on a separate hard drive (K:\) but I dont see anything pertaining to playlists. How do i save playlists and what is the process needed to restore library and playlists once I get the OS up and running?
Thanks in advance.You need the itunes database. It's a file named iTunes Library.itl
Just to be safe, my advice is to back up this folder
C:\users\ username \Music
That will include the itunes folder and that ITL file. -
i bought a iphone from my freind and its disabled and i have tried to restore it but when i do i tells me i need a update, and when i do this it tells me i need to wait 6 hours for the update and i just need to restore the iphone. i need help
Hey rox,
I'd say it's possible that you internet connection is slow. I would try to cancel the download and possibly restart the router, then try the update again.
Check you internet speed here.
http://www.speedtest.net
Hope this helps -
First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcomeStill struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6 -
its says my system is under recovery and needs to be restored.
i restored it and when i go to sync it the same message appears.
I tryed it again 3 times and same thing happends.
what can i do?See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some Users have reported that it has taken as many as 7 or 8 attempts before success...
But... if the Device has been Modified... this will Not necessarily work. -
It just keeps telling me "The session failed to start"
It means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
CMS Databae/Audit Database
Hi ,
I am using BO Edge Series XI3.1 Sp3
My CMS , AUdit data base both are in SQL Server 2008 R2.
below are the my queries.
1. My CMS Database Log file growing rapidly , how i can stop it.
2. how does keep only last 1 month data in Audit database.
please help me out.
thanks in advance.
reddeppa kHello,
1480761 - How to purge or cleanup old data from the BusinessObjects Enterprise XI 3.1 Audit Database
1581890 - Does BusinessObjects Enterprise support to clean up audit database?
I think, that you find much informations about you problem.
best regards
Krys -
is anyone there ??
Do as it says and restore your phone at this point there is no data on your phone. If you have a backup of your phone you can restore to that backup.
-
Backup and restore to the other database with Recovery Catalog
Dear All,
i need your help about recovery catalog.
I have 3 databases, 2 databases version are 8.1.7.3 (HostA and HostB) and other database is 9.2.0.6 (as Catalog Database)
I want to backup files from HostA with Catalog Database into tape, then restore the backup files into HostB.
Please suggest me how to do this.
Best Regards,
abipyou can achieve this with the rman duplicate command.
if you have the same directory structure then it is a relatively simple task, if the directory structure is different then you need to use the
'set newname' syntax.
regards
Alan
Maybe you are looking for
-
Possible to determine exception thrown in a finally block?
I believe the answer to this is 'no', but I thought I would ask just to confirm. If an exception is thrown in a try block, is there a way in the finally block to determine what exception was thrown? I tried using Throwable#fillinStackTrace and Thread
-
Just upgraded to Firefox 4 and important Norton toolbar is missing - how do I get it back?
I've only just upgraded to Firefox 4 today (30.4.11) and when it had installed and restarted, my Norton toolbar was missing. A message from Firefox did come up - something to do with some items not compatible with version 4 but I can't remember all t
-
How to control item between Form mode change
Hi Experts I am using B1DE to do something like some item's enable status will be changed following the Form mode change. For instance, add a new matrix into system form, if changing the Form mode to Find, I want to disable this matrix, if changing t
-
Create two databases in one oracle home
Hi All, I am new in oracle, using oracle standard edition 10g and some questions I want to ask. Is it possible to create 2 different databases under same oracle home? For example, one database for online transaction named orcl_online, one database fo
-
Right now, I am coding the username/password@something into the scripts that I am writing for oracle8i database. I understand that there are security issues with this. They want the password to be hidden. Someone suggested me to set the username and