Backup SQL database by php mssql driver ERROR

SQL QUERY
backup database baza_programu to disk='d:\arh\baza_programu.bak'
In SQL Server management studio it's OK.
Processed 2840 pages for database 'baza_programu', file 'baza_programu' on file 1.
Processed 2 pages for database 'baza_programu', file 'baza_programu_log' on file 1.
BACKUP DATABASE successfully processed 2842 pages in 3.932 seconds (5.644 MB/sec).
BY PHP MSSQL DRIVER
Error in executing query.
Array (    [0] => Array        (            [0] => 01000            [SQLSTATE] => 01000
[1] => 4035            [code] => 4035            [2] => [Microsoft][SQL Server Native Client 10.0][SQL Server]Processed 2840 pages for database
'baza_programu', file 'baza_programu' on file 2.            [message] => [Microsoft][SQL Server Native Client 10.0][SQL Server]Processed 2840 pages for database 'baza_programu', file 'baza_programu'
on file 2.        ) )
( notice. no include baza_programu.log file   )
Pawel.

Hello,
Please try to put = usleep(300) after sqlsrv_query.
Make sure D drive has enough space for the backup.
The following article may be useful.
http://blogs.msdn.com/b/brian_swan/archive/2010/04/06/backup-and-restore-with-the-sql-server-driver-for-php.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Backup SQL Database

Hi SQL Server Expert,
Our company is using the SQL Server 2012 for the Navision Database. I am new to the ERP and CRM. thus, it would be very appreciate if you could guide me on how to perform the backup and restore on the SQL database.
Thanks so much.
Regards,
Henry

may I know is it possible to create the schedule that will run automatically using the SSMS? what is actually the best practice of doing backup for the database.
Hi Henry2050,
It is possible to create the schedule to back up your database automatically by maintenance plan. Below are the steps about how to use maintenance plan.
1. Expand the server where you want to create your management plan and expand the Management folder.
2. Right-click the Maintenance Plans folder and select Maintenance Plan Wizard.
3. On the SQL Server Maintenance Plan Wizard page, click Next. On the Select Plan Properties page:
a. Enter the name of the maintenance plan, briefly describe your maintenance plan and specify the credential that Microsoft SQL Server Agent uses when executing the maintenance plan.
b. Select either Separate schedules for each task or Single schedule for the entire plan or no schedule
c. If you selected Single schedule for the entire plan or no schedule, under Schedule, click Change and click next.
4. On the Select Target Servers page, select the servers where you want to run the maintenance plan.
5. On the Select Maintenance Tasks page, select maintenance task Back Up Database(Differential, Full or Transaction Log) to add to the plan. Then click Next and select the database you want to backup and click Next. If you select Separate schedules for each
task, you will need to follow the steps in c.
6. Select Report Options and Complete the Wizard. For more information about the process, please refer to the article:
http://msdn.microsoft.com/en-us/library/ms191002.aspx
Below are the recommendations for best practices of backup.
1.Make sure you are not storing your backups in the same physical location as the database files.
2.Make sure you have a proper backup schedule established according to the needs of the application and business requirements.
3.Make sure to actually restore the backups on a test server and verify that you can restore with all the options and conditions you need to use during a planned or un-planned downtime.
4.Use the verification options provided by the backup utilities.
5.Use advanced features like BACKUP CHECKSUM to detect problems with the backup media itself. For more information about the process, please refer to the article:
https://support.microsoft.com/kb/2027537/en-us
Regards,
Michelle Li

Basic questation about backup SQL database

Hi I have basic questation about backup database . If I set DPM to backup database and the database have full model and another application truncate log. Detect this dpm and create full backup or create error ?
Falcon

Hi,
If you want another backup process to truncate the logs instead of DPM, you can just configure DPM to synchronize
just before a recovery point. That basically tells DPM to just perform express full backups which will not truncate logs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Getting error while backing up SQL database using powershell

I am trying to backup SQL database but strange thing is taking lpace, few databases i can backup with powershell but few i am getting error
Exception calling "SqlBackup" with "1" argument(s): "Backup failed for Server
'Server1'. "
At C:\_Scripts\defaultbackup.ps1:40 char:1
+ $smoBackup.SqlBackup($server)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : FailedOperationException
$dbToBackup = "test"
#clear screen
cls
#load assemblies
#note need to load SqlServer.SmoExtended to use SMO backup in SQL Server 2008
#otherwise may get this error
#Cannot find type [Microsoft.SqlServer.Management.Smo.Backup]: make sure
#the assembly containing this type is loaded.
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") |
Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo")
| Out-Null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-
Null
#create a new server object
$server = New-Object ("Microsoft.SqlServer.Management.Smo.Server") "(local)"
$backupDirectory = $server.Settings.BackupDirectory
"Default Backup Directory: " + $backupDirectory
$db = $server.Databases[$dbToBackup]
$dbName = $db.Name
$timestamp = Get-Date -format yyyyMMddHHmmss
$smoBackup = New-Object ("Microsoft.SqlServer.Management.Smo.Backup")
#BackupActionType specifies the type of backup.
#Options are Database, Files, Log
#This belongs in Microsoft.SqlServer.SmoExtended assembly
$smoBackup.Action = "Database"
$smoBackup.BackupSetDescription = "Full Backup of " + $dbName
$smoBackup.BackupSetName = $dbName + " Backup"
$smoBackup.Database = $dbName
$smoBackup.MediaDescription = "Disk"
$smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp +
".bak",
"File")
$smoBackup.SqlBackup($server)
#let's confirm, let's list list all backup files
$directory = Get-ChildItem $backupDirectory
$smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp + ".bak", "File")
$smoBackup.SqlBackup($server)
#let's confirm, let's list list all backup files
$directory = Get-ChildItem $backupDirectory
#list only files that end in .bak, assuming this is your convention for all backup files
$backupFilesList = $directory | where {$_.extension -eq ".bak"}
$backupFilesList | Format-Table Name, LastWriteTime
$backupFilesList = $directory | where {$_.extension -eq ".bak"}
$backupFilesList | Format-Table Name, LastWriteTime
I read on internet that by using this in the script this problem can be sorted but i am
not sure where exactly to put this line in above script set the ConnectionContext.StatementTimeout to 0


Hi Srk,
I found the similar issue in this article, which had been sovled by adding the script below:
$server = New-Object ("Microsoft.SqlServer.Management.Smo.Server") $dbInstance
$server.ConnectionContext.StatementTimeout = 0
Refer to:
Exception calling "SqlBackup" with "1" argument(s)
Please feel free to let me know if this method can not work.
Best Regards,
Anna Wang

MSSQL 9 error

I;ve setup a development pc on my home XP Pro PC. I have
installed Coldfusion MX version 7,0,0,91690.. My problem, is that i
cant create a Datasource to MSSQL Server 9.. It is the express
version...
The error i get is
Connection verification failed for data source: Intranet
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect

cfdevshed wrote:
> I;ve setup a development pc on my home XP Pro PC. I have
installed Coldfusion
> MX version 7,0,0,91690.. My problem, is that i cant
create a Datasource to
> MSSQL Server 9.. It is the express version...
> The error i get is
>
> Connection verification failed for data source: Intranet
> java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing
> socket. Connection refused: connect
The database is not listening on the port you instructed CF
to connect.
Have you configured the database to listen for TCP/IP
connections? Do
you have a firewall running?
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Need help connecting a MS Sql Database in CF Administrator

Good morning,
I`m hoping someone out there can help me.
I simply want to add a MS SQL datasource within Coldfusion Administrator.
I have connected to it successfully with Sql Server Management Studio, using Windows Authentication.
I`m assuming I need to use Windows Authentication to connect within Coldfusion Administrator
How do I fill out these fields then:
because I am getting this error:
Connection verification failed for data source: test
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket. Unknown host: local
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket. Unknown host: local
I have also tried it with localhost as opposed to local.
Please help?
Thanks;
Rhonda

I believe you DON'T.
ColdFusion, by default, does not run as any type of user that would work with Windows Authentication. It can be set up to do so, through the windows services panel. You configure the ColdFusion service(s) to "Log On As" some windows domain account with the desired permissions. This is normally done to allow CFML code to access network resources for file operations and the like.
But, I don't know if that is good enough for a connection to a SQL server. I've never had to deal with it myself (I have operations and database administrators types who deal with this for me). But I have read many many times on forums like this that the default security configuration of SQL server does not work with ColdFusion. That one has to set up an alternate configuration in SQL, TCP/IP I think?

T-SQL Code to backup database with multiple files - Syntax error

Hello,
I'm trying to backup a database into multiple files but I'm getting a syntax error.
Here is the code:
declare @DBName varchar(100)
declare @DBFileName varchar(256)
declare @FolderName varchar(256)
declare @Path varchar(100)
set @Path = '\\Backup-Server\Test\'
set @DBName = 'DayNite'
set @DBFileName = 'DayNite-Full' + '-' + (SELECT CONVERT(char(10), GetDate(),110)) + '-' + 'P'
set @FolderName =(SELECT CONVERT(char(10), GetDate(),110))
set @Path = @Path + @FolderName + '\'
EXEC master.dbo.xp_create_subdir @Path
--Calculate broken files for BACKUP DATBASE Function
/*declare @dbsize int
set @dbsize = (SELECT ((size*8)/1024)/1000 as SizeGB FROM sys.database_files WHERE file_id = '1')
set @dbsize = @dbsize / 4
print @dbsize*/
EXEC
BACKUP DATABASE [test] TO
DISK = @Path + @DBFileName + '1.bak',
DISK = @Path + @DBFileName + '2.bak',
DISK = @Path + @DBFileName + '3.bak',
DISK = @Path + @DBFileName + '4.bak',
DISK = @Path + @DBFileName + '5.bak',
DISK = @Path + @DBFileName + '6.bak',
DISK = @Path + @DBFileName + '7.bak',
DISK = @Path + @DBFileName + '8.bak',
DISK = @Path + @DBFileName + '9.bak',
DISK = @Path + @DBFileName + '10.bak',
DISK = @Path + @DBFileName + '11.bak',
DISK = @Path + @DBFileName + '12.bak',
DISK = @Path + @DBFileName + '13.bak'
WITH INIT , NOUNLOAD , NAME = 'DayNite Full Backup', NOSKIP , NOFORMAT

Made some slight modifications to your script and it should work(worked when tested).. if you wnat more complete solution -- google -OLA Hallengren backups -- you should get some good scripts..
declare @DBName varchar(100)
declare @DBFileName varchar(256)
declare @FolderName varchar(256)
declare @Path varchar(100)
set @Path = '\\Backup-Server\Test\'
set @DBName = 'DayNite'
set @DBFileName = 'DayNite-Full' +''+ '-' +''+ (SELECT CONVERT(char(10), GetDate(),110)) +''+ '-' +''+ 'P'
set @FolderName =(SELECT CONVERT(char(10), GetDate(),110))
set @Path = @Path +''+ @FolderName +''+ '\'
EXEC master.dbo.xp_create_subdir @Path
--Calculate broken files for BACKUP DATBASE Function
/*declare @dbsize int
set @dbsize = (SELECT ((size*8)/1024)/1000 as SizeGB FROM sys.database_files WHERE file_id = '1')
set @dbsize = @dbsize / 4
print @dbsize*/
select @Path,@DbFileName
declare @SQL nvarchar(2000)
Set @SQL ='Backup DATABASE [DAYNITE] TO DISK = '''+@Path +''+ @DBFileName +''+ '1.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '2.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '3.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '4.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '5.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '6.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '7.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '8.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '9.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '10.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '11.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '12.bak'',
DISK = '''+@Path +''+ @DBFileName +''+ '13.bak''
WITH INIT , NOUNLOAD , NAME = ''DayNite Full Backup'', NOSKIP , NOFORMAT '
print @SQL
exec (@SQL)
Hope it Helps!!

Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama

Hi Anupama,
First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
These are a few simple things that you should do in your JDBC program:
1. Import the necessary JDBC classes in your programs that use JDBC.
For example:
import java.sql.*;
import java.math.*;
2. Register the Oracle driver before before calling other JDBC APIs.
(This is not needed if you are using the JDBC Server-side Internal
Driver because registration is done automatically in the server.)
To register the Oracle driver, make sure the following statement
is executed at least once in your Java session:
DriverManager.registerDriver(
new oracle.jdbc.driver.OracleDriver());
3. Open a connection to the database with the getConnection call.
Different connection URLs should be used for different JDBC
drivers. The following examples demonstrate the different URLs.
For the JDBC OCI8 Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:oci8:@<database>",
"scott", "tiger");
where <database> is either an entry in tnsnames.ora or a SQL*net
name-value pair.
For the JDBC Thin Driver, or Server-side Thin Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:@<database>",
"scott", "tiger");
where <database> is either a string of the form
<host>:<port>:<sid> or a SQL*net name-value pair.
For the JDBC Server-side Internal Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:kprb:");
Note that the trailing ':' character is necessary. When you use
the Server-side Internal Driver, you always connect to the
database you are executing in. You can also do this:
Connection conn
= new oracle.jdbc.driver.OracleDriver().defaultConnection();
Hope this helps,
Thanks,
Anupama wrote:
I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama--
Apurb Kumar

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

Need help trouble shooting Database Gateway for MS SQL Server setup, getting ORA-28546 error

Dear All,
I am trying to setup Oracle Database Gateway for MS SQL Server(I don't have admin access to the MS SQL Server). When I try to test the dblink connection, I get the following error.
I issued select * from dual@xyz;
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding 2 lines from xyz
28546. 0000 - "connection initialization failed, probable Net8 admin error"
My setup is the following.
1. Oracle 11gR2 running on Oracle Linux 6, the same version gateway is installed on the same server, but different home directory.
2. Oracle DB home directory is /u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is /u01/gateway.
3. I use the same listener.ora file for both the db and the gateway.
4. the contents of my listener.ora, tnsnames.ora and the initdg4msql.ora are below.
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      #(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
      (ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
mssql =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME=db.abc.com.tw)
      (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
      (SID_NAME=orcl)
SID_LIST_mssql =
(SID_LIST =
    (SID_DESC =
      (SID_NAME=dg4msql)
      (ENVS=LD_LIBRARY_PATH=/u01/gateway/dg4msql/driver/lib:/u01/gateway/lib)
      (PROGRAM_NAME=/u01/gateway/bin/dg4msql)
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.abc.com.tw)
dg4msql =
(DESCRIPTION=
    (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521))
    (CONNECT_DATA=(SID=dg4msql))
    (HS=OK)
/u01/gateway/dg4msql/admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=255
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
dblink was created using statement below.
CREATE DATABASE LINK "xyz.abc.COM.TW"
CONNECT TO SA IDENTIFIED BY
USING 'dg4msql';
Couple more things, that I have done to check the work above.
[oracle@db admin]$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=61 time=7.61 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=61 time=7.41 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
rtt min/avg/max/mdev = 7.417/7.516/7.615/0.099 ms
[oracle@db admin]$ tnsping dg4msql
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
[oracle@db admin]$ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     mssql
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                11-SEP-2013 10:09:46
Uptime                    0 days 0 hr. 44 min. 37 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/db/mssql/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Obviously, I would like to get this setup to work, but I also have couple other questions regarding this setup.
1. When installing the gateway, it asks to run the root.sh script. the root.sh script as for the following.
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
is the above answer correct?
Thanks for reading.

Dear Klaus,
I did start a new SQL*PLUS session
The output of /u01/gateway/bin/dg4msql is
[oracle@db log]$ /u01/gateway/bin/dg4msql
Oracle Corporation --- WEDNESDAY SEP 11 2013 14:45:06.604
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
   Oracle Database Gateway for MSSQL
The output of env is
HOSTNAME=db.abc.com.tw
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=orcl
TMPDIR=/tmp
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=db.abc.com.tw
MAIL=/var/spool/mail/oracle
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
_=/bin/env

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

Offline Backup in SQL Database using DB13

Hi experts,
I am new to MSSQL database.
We are using ECC 6 with MSSQL 2005. In DB13 we get the following options.
Full Database backup
Diff DB backup
Transaction Log Backup
Check DB consistency
We do not have the option to take a offline backup from DB13.
My question is, weather it is possible to take a offline backup in MSSQL.
If yes could please give me the procedure for doing a offline backup using DB13.
Thanks in advance for the response.
Regards
Anil

Lol, No by definition SAP and SQL would need to be down to take that type of file backup.
Offline backups are not a supported recovery method.
Online backups will allow for PIT or full recovery.
Offline backups will not be report in SQL or SAP as you haven't backup the database - rather just the files.

Got an error while creating bind variables using sql database.

iam going to use sql database for ADF-BC .
i created the bind variable and apply the bind position for the corresponding variable in the view object editor.when i click test it shows me "query is valid". when i tried to run that it gives me two errors.
1) sql error during statement preparation.(ie) select empid ,empname......from the emptable where empid like :'emp' and
2) [Microsoft][SQl server 2000 driver for jDBC] invalid parameter bindings
i need help to know the solution for this...(or) is there any other way to create bind variable ......

The 3 binding styles supported by JDev:
Oracle Named - ie. SELECT xxxx FROM xxxx WHERE emp_id = :vEmp (note colon and variable name)
Oracle Positional - ie SELECT xxxx FROM xxxx WHERE emp_id = :1 (note colon)
JDBC Positional - ie SELECT xxxx FROM xxxx WHERE emp_id = ?
Literally this query is sent to the database to execute, then the bind variables values are applied as a separate database operation. If SQL Server doesn't suport any of these binding styles, it's not going to work. As Chris Noonan suggests, try the JDBC Positional style though as you're using a JDBC driver to connect to SQL Server and it should support that style (the others are Oracle styles), and make sure you've switched the binding style on the VO query page to "JDBC Positional" too.
You must also on the VO bind variable page define your bind variables.
Also read the 10.1.3 JDev guide on ADF Business Components and View Object bind variables.
CM.

Internal server error while connecting to Tandem NonStop SQL database

Hi -
We are trying to connect to the Tandem NonStop SQL database through JDeveloper.
We are using Type4 JDBC driver provided by Tandem NonStop and everything works fine from Database connection to testing the AppModule through the BC4J tester. The VOs return rows perfectly when we test the AppModule.
BUT -
When we try to invoke a jspx page (using embedded OC4J server) with an ADF Read Only table of the ViewObj, we get a "500 Internal Server Error" with following details. (Error listing at the end)
We are using:
JDeveloper 10.1.3.0 SU5
ADF JSF
And the database is NonStop SQL on Tandem NonStop Server S Series box.
Any help to resolve the issue will be highly appreciated. We also face problems when making this as a WebService - detals of which I will post in a new thread.
Thanks in advance,
Saran
Error Listing (portions removed)
JBO-30003: The application pool (model.PxdAppModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
     at oracle.jbo.JboException.<init>(JboException.java:346)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
     at oracle.jbo.JboException.<init>(JboException.java:346)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
     at oracle.jbo.JboException.<init>(JboException.java:346)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
     at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220)
## Detail 0 ##
java.sql.SQLException: No suitable driver
     at java.sql.DriverManager.getConnection(DriverManager.java:545)
     at java.sql.DriverManager.getConnection(DriverManager.java:140)
     at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:189)

Kuba -
I have done exactly as mentioned in the link you have provided except that I am using JSF instead of Struts.
As I have mentioned earlier, if I test the AppModule through the BC4J tester it works fine. I can see my ViewObject with rows from the Tandem database. Only when I run the JSF page do I get the error. Is there something I need to configure in faces-config for accesing Tandme database?
Saran

Database link Oracle to MySql Error [Microsoft][ODBC Driver Manager]

Dear all:
I need your help, I want to access mysql database from oracle 11g r2. When I try to connect mysql database from oracle database I'm getting the error shown below, kindly help your help will be appreciated, thanks in advance
When I excute:
select * from test1@mysqltest;
[ERROR]
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified {IM002}
ORA-02063: preceding 2 lines from THAONT1.MYSQL
28500. 00000 - "connection from ORACLE to a non-Oracle system returned this message:"
*Cause:    The cause is explained in the forwarded message.
*Action:   See the non-Oracle system's documentation of the forwarded message.
My config
oracle db:11.2.0.3 enterprise edition
os:win 7 64 bits
mysql connector odbc:64 bit
mysql db:5.1.19
ODBC Config
LISTENER.ORA:
=============
# listener.ora Network Configuration File: D:\app\THAONTSE90151\product\11.2.0\dbhome_3\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:D:\app\THAONTSE90151\product\11.2.0\dbhome_3\bin\oraclr11.dll")
    (SID_DESC =
      (SID_NAME = tst)
      (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)
      (PROGRAM = dg4odbc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.1.58)(PORT = 1521))
ADR_BASE_LISTENER = D:\app\THAONTSE90151
TNSNAMES.ORA:
================
TSTLINK =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.1.58)(PORT = 1521))
    (CONNECT_DATA =
      (SID = tst)
    (HS = OK)
inittst.ora($ORACLE_HOME/hs/admin)
========================
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = testmysql
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set ODBCINI=D:\ODBC.INI
dblink created from oracle to mysql:
==========================
SQL> create public database link mysqltest
connect to thaont identified by abc123 using 'TSTLINK';
SQL>select * from test1@mysqltest;
[ERROR]
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified {IM002}
ORA-02063: preceding 2 lines from THAONT1.MYSQL
28500. 00000 - "connection from ORACLE to a non-Oracle system returned this message:"
*Cause:    The cause is explained in the forwarded message.
*Action:   See the non-Oracle system's documentation of the forwarded message.
kindly help.
thanks & regards.

The error message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified {IM002}" is self explainind - DG4ODBC is not able to find the ODBC DSN you created.
In your gateway init file you configured the DSN: HS_FDS_CONNECT_INFO = testmysql
And according to the Windows ODBC Admin screenshot you created a DSN called testmysql - unfortunately you created it as a USER DSN. But DG4ODBC needs a SYSTEM DSN. The reasin why it needs a system DSN is that by default the Oracle listener is running in the local system account. So when you create an ODBC USER DSN it can be access by the user who created it, but nobody else can use it - also not the local system account which is serving the Oracle listener. So you need to create a system DSN that every user on this machine can use the DSN (including the local system account) .
- Klaus

Backup SQL database by php mssql driver ERROR

Similar Messages

Maybe you are looking for