BADI for t-code PTMW

Hi Experts,
I am implementing BADI PT_BLP_USER for the transaction PTMW.
We have to seperate logic for create record in PTMW and delete record. But I am not able to capture the delete action while the BADI is triggered.
Can any1 please let me know, sample code is always welcome. The filter I have set is SAV.
Thanks & Regards,
Manas

Hi
Implementing screen enhancement in XD01 is some what tricky.
First of all, you have create a screen group in SPRO. For example 'ZC'.
To assign screen:
Implement BADI: CUSTOMER_ADD_DATA_CS
Method: GET_TAXI_SCREEN
To activate screen:
Implement BADI: CUSTOMER_ADD_DATA
Method: CHECK_ADD_ON_ACTIVE - Write the following code.
CASE I_SCREEN_GROUP.
    WHEN 'ZC'.              " SCREEN GROUP
      E_ADD_ON_ACTIVE = 'X'.
    WHEN OTHERS.
ENDCASE.

Similar Messages

User EXIT, BADI for T-code ME21n, ME21

Hi Guru's,
I have rquirement where for some company codes user dont want GR and GR based invoicing if net price for PO is less than 100 GBP as it is very small quantity.
To achive this we have to uncheck Goods receipt check bax from tab 'Delivery' and uncheck inv. receipt check box from tab 'Invoice' of item level view at the time of PO creation.
Now, i am serching for User exit or BADI which will serve this purpose, as T-code ME21n is enjoy transaction for ME21 i dont think we will get any user exit, we have to do it through BADI.
If anyone has done something like this and have idea how i can achive this please revert back.
regards,
Rahul

http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
It may help you.
Best Regards,
Vibha
*Please mark all the helpful answers

Exit or badi for t code EXPD (Progress Tracking)

Hi Gurus
I have to add two fields in t code EXPD (Progress Tracking) can you please tell me the name of Exit or BADI for that.
Thanks In advance.
Chitta Ranjan Mahato

Frankly, I never worked on EXPD (Progress Tracking).
Still, I believe the following SAP Help link will be helpful to you:
- [ BAdIs for Progress Tracking |http://help.sap.com/saphelp_470/helpdata/en/d6/89412e7197f1438e16baf05abe2fe5/content.htm]
Regards
JP

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User exit or badi for transaction code CORS

Hi All
I am looking for user exit or badi to update item text while executing transcation code CORS.
Please Advice
Thank You
Ravindra Suvarna

Hi
Check these enhancements and exits
CONFPS05 PS confirmation: Customer specific enhancements when saving
EXIT_SAPLCORF_010 PS Confirmation: Customer-Specific Enhancements when Saving
CONF0001 Enhancements in order confirmation
EXIT_SAPLCORU_001 Order Confirmation: Deactivation of Functions

CATS: Looking for user exit / badi for transaction code CAT4/CATS_APPR_LITE

Hi,
I have a task here that needs to send external email to the employee's manager whenever the approver set the status from 'released for approval' to 'approve'.
which is status 20 to 30 in CATSDB-STATUS thru transaction code CAT4 or
CATS_APPR_LITE.
Can anyone give some help here?
Thanks in advance.

Hi,
there are mainly three ways to trigger a workflow:
- linked to a change document, because in standard function module to write change documents a trigger for a workflow is pre-designed. With workflow-customizing you can activate an active trigger.
- linked to output messages. There is a medium 9, which is the workflow trigger.
- linked to status changes. Maybe not all status change functions include a pre-designed workflow trigger, but at least for status in table JEST it should be possible to make workflow-customizing to activate a trigger.
- 'manually' with a function module SWE_EVENT_CREATE.
It's also possible to define filters (e.g. only status = approved), so your example was perfectly fitting workflow possibilities. If no other option is fitting, have a look at above mentioned exit.
Then you still have the question, should you try to define a workflow or just create a mail by FM. There I can't help you, this depends more on your skills and time.
Regards,
Christian

User Exit or BADI for T.code CO11N

HI All,
I created a Production Order(100023) using TCode CO01 with 10 Qty.
When i am creating a Production Order confirmation using TCode CO11N, i Confirmed 9 Qty and 1 Qty for Rework Order, it is confirming the 9Qty and creating a new Production Order (100024) for 1Qty.
As per the requirement it is working fine. While system creating a Production Order (100024) for the Rework Qty, i need to populate the Reference Production Order number (100023) in the field Ref. Order in Control Data tab in the Production Order.
Can any one suggest me how to populate this field? Is this possible by any USER EXIT or BADI ?
Or Can we do it by configuration?
Regards,

Hi Prakash,
Thank you for response,
I tested this EXIT, it consists only Original Prod Order and its Confirmation details only. It doesn't have the Rework Prod Order details.
I need to populate the Original Prod Order number in Rework order control data.
Regards,
Srinivas K

User Exit or Badi for transcation code COR6N

Hi All
While saving the document through COR6N, i want to update the item text of all the items with the value of the batch number of the second item in the item list.
I am looking for user-exit or badi where I got access to MSEG internal table and it also allow me to change item text.
Please advice.
Ravindra Suvarna

Check this Badi WORKORDER_GOODSMVT.
and in this COGI_POST have access to the MSEG table.
Regards
Vijay

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

Userexit/BAdi for CBIH102 (HR-EHS module)

Hi guru's,
Please help find the userexit/BAdi for Transaction code: CBIH102. The Requirement is to auto-populate the Accident Category (CCIHT_IPEVA-IALPCAT) field during the Creation/Change mode. I tried the below exits/BAdi & set all the breakpoints, activated CMOD projects and even implemented BAdi. It is not triggering. Enhancement Framew
Object Name                                 Description
EHSIAHM1                                     EH&S: Menu Exit 1 for Incident/Accident Log Header
EHSIAHM2                                     EH&S: Menu Exit 2 for Incident/Accident Log Header
EHSIAPM1                                     EH&S: Menu Exit 1 for Incident/Accident Log Person
EHSIAPM2                                     EH&S: Menu Exit 2 for Incident/Accident Log Person
EHSMPHM1                                   EHS: Menu Exit 1 for Measurement Project Header Data
EHSMPHM2                                   EHS: Menu Exit 2 for Measurement Project Header Data
EHSMPJM1                                    EHS: Menu Exit 1 for Measurement Project Measurements
EHSMPJM2                                    EHS: Menu Exit 2 for Measurement Project Measurements
EHSSARA                                     EHS: Check/Edit Lines in SARA List Before Printout
BAdi Name                                    Description
EHSI_AC_COSTC                          EHS: Cost Calculation in Safety Measures
EHSI_ANNC_RATCP                      EHS: Calculation of Rating of Standardized Criteria
EHSI_ER_MEX_01                          EHS: Risk Assessment Menu Exit 1
EHSI_ER_MEX_02                          EHS: Risk Assessment Menu Exit 2
EHSI_ER_MEX_03                          EHS: Risk Assessment Menu Exit 3
EHSI_ER_MEX_04                          EHS: Risk Assessment Menu Exit 4
EHSI_FAL_***_SRV_SCR           EHS: Screen Enhancement: Injury/Illness Log-Service Assignmt
EHSI_FAL_MEX_01                        EHS: Injury/Illness Log Menu Exit 1
EHSI_FAL_MEX_02                        EHS: Injury/Illness Log Menu Exit 2
EHSI_FAL_MEX_03                        EHS: Injury/Illness Log Menu Exit 3
EHSI_FAL_MEX_04                        EHS: Injury/Illness Log Menu Exit 4
EHSI_IA_RPHDFLG_COMP             EHS: Determ. of Reportable Event Indicator in Inc./Acc. Hdr
EHSI_INT_ORG_1403                     EHS: Write Long-Term Average to Infotype 1403
EHSI_MJVA_MATCHUP                  EHS: Transfer Measured Values - Amounts
EHSI_MJ_IMPORT                           EHS: Import Measured Values
EHSI_MJ_MEX_01                           EHS: Measurement Management - Measurement - Menu Exit 1
EHSI_MJ_MEX_02                           EHS: Measurement Management - Measurement - Menu Exit 2
EHSI_MP_CREATE                          EHS: Create Measurement Projects
EHSI_MP_DV_SCR                         EHS: Screen Exit: Device List in Measurement Management
EHSI_MP_EPI_IMP                           EHS: Import Exposure Profile
EHSI_MP_METHOD_HELP               EHS: F4 Help for Measurement Method
EHSI_MP_MEX_01                           EHS: Measurement Management - Meas. Project - Menu Exit 1
EHSI_MP_MEX_02                          EHS: Measurement Management - Meas. Project - Menu Exit 2
EHSI_WA_MEX_01                         EHS: Work Area Menu Exit 1
EHSI_WA_MEX_02                         EHS: Work Area Menu Exit 2
EHSI_WA_MEX_03                         EHS: Work Area Menu Exit 3
EHSI_WA_MEX_04                         EHS: Work Area Menu Exit 4
EHSI_WA_OVERALL_RAT             BAdI Default Impl.: Work Area Overall Rating
EHSI_WA_RECEIVED_RAT             BAdI Default Impl.: Work Area Received Rating
EHSI_ACPM_DATA_TRANS           BAdI Default Impl.: Work Area Received Rating
EHSI_CLM_HEAD_SCR                  BAdI Default Impl.: Work Area Received Rating
EHSI_CLM_MEX_1                          BAdI Default Impl.: Work Area Received Rating
EHSI_CLM_MEX_2                          BAdI Default Impl.: Work Area Received Rating
EHSI_CLM_PAY_SCR                    BAdI Default Impl.: Work Area Received Rating
EHSI_IAL_COSTS_SCR                 BAdI Default Impl.: Work Area Received Rating
EHSI_IPEVA_TIMDAT                     EHS: Make the Multiple Absences in the I/A Log flexible
Regards,
Vinayak

Up please )

Stop standard process in user exit (or badi) for ME21N.

Hello,
I have implemented a user exit (and also a BADI) for transaction code ME21N.
The user exit is executed before saving the purchase order.
In my user exit, I just check data and if they are wrong, I just want to stop the process displaying an error message.
So, I've just used 'MESSAGE Exxx(xxxx)'.
The problem is that the standard process catch the error and treat it in stead of stopping. The standard process treats the error and proposes the user to chose if he(she) wants to continue or to stop (within a popup).
I just want to stop the process, displaying a error message.
If someone has a idea about how I can realise that, please let me know.
Giuseppe,

Which Exit/Badi did you implement? And Error message should normally stop the process. Maybe you have implemented the wrong exit.

User Exit/Badi for VF01

Hi all,
I'm trying do find a user-exit/badi for t-code VF01, that allows me to change at the same time,some fields, of the header structure VBRK and items structure VBRP (all the items available). Until now, all the user-exits i've tried dont allow me to change both structures at the same time, neither badi (SD_CIN_LV60AU02). Regards,
PCastro

Hi,
may be you are trying to chage the some other BADI. to find the exact BADI, follow this procedure.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
if you follow this 7 steps, you will find a suitable BADI.
pl reward if it helps.
Thanks & Regards
Sadhu Kishore

Why badi HRPAD00INFTY can't work in t-code PTMW?

hi:
why badi HRPAD00INFTY can't work in t-code PTMW? if I want to do enhancement about PT infty in PTMW,what should i do?

Please refer to help document for BAPI:HRPAD00INFTY which allows you to react to specific events in Personnel Administration. If you need logic in TMW, implement BADI PT_BLP_USER. Further information can be found in section 6.a of SAP Note 447097.
Regards
Chetan

User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

Hi all,
I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
The scenario is like this...
For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
Table
Supplying Plant/              Receiving Plant                      Tax code
Vendor/Country
Any plant/vendor/
country                           5050(NA)                               20
2300                              6700                                     E0
If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
Thanks,
Shiva, Bangalore

Hi Siva.,.,.,
These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
U want to default some values while the Initial screen will come right,
while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
If u want to Default some values u can use these two exits.,.
Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
Regards
Debasish
Message was edited by:
        Debasish Das

Sample Code in BADI for Open Hub Services

Hi all,
        We have a requirement to extend(add few new fields and populate them using BADI) for the target structure of Infospoke in Open hub services.
I have 2 issues which are stopping us to proceed further.
       1.   I did this by just adding new fields in this change mode of target Structure (didn't used 'Append structure' as while saving and creating T.port request,its popping error like 'Structure not present in TRDIR).I am not able to assign this to any T.request,as of now I have saved it as Local object.How can I assign this to an request?is it possible?.
       2. After putting breakpoint in the BADI I don't see any data in the Importing table.I need some sample code in the BADI which should populate the New fields in the target structure.
It will be great if anyone of you will give us any solution for the same.
Thanks,
Rahul.
Edited by: Rahul Siddi on Oct 12, 2009 3:04 PM

Hello Rahul,
Find the code below with the steps to be implemented.
Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN] = I_T_DATA_IN[.
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
Check if you missed any of these...
Kris...

BADI for t-code PTMW

Similar Messages

Maybe you are looking for