BAdi not getting called after applying CRM7.0 ehp1

Hi experts,
We applied EHP1 to our Sandbox system and now Badi: CRM_MKTPL_OL_OBJ is randomly getting called.
I went to se18 enter the enhancement spot and once i enter the Badi Implementation I can see under
Runtime Behavior that the implementation is active. However the description in Effect in Current Client says:Execution depends on runtime filter values
While in our other client in which we havent applied EHP1 the Effect in Current client: Implementation is called
I know that is just the description but I am not sure if somthing has changed with EHP1
For both clients the implementation is active, but in the client in which we applied EHP1 the Badi is not getting called where expected.
Does anyone please have any suggestions.
your help is appreciated.
thanks,
Jeannet.

Hi Jeannet,
probably have a look at the filter values in the BAdI implementation as well. It says it has got filters. Maybe the BAdI is only activated for Campaigns but not Elements?
If that does not bring the conclusion do a where used list on the interface for the BAdI. It will bring you to the place where it is called in ABAP and you see the direct cause why it sometimes is called or not.
I implemented the mentioned BAdI on CRM 6 as well as 7 and 7.1 had no problems I can remember so far.
cheers Carsten

Similar Messages

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

ReturnEvent not get called after search more than 10 times in LOV page

hi there,
I using ADF and Jdeveloper 10.3.1.2
In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
So should I do so that ReturnListener get called.
Is it any bug of ADF or Jedeveloper .

Hi,
depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
How to debug "Attempt to validate an already invalid RegionSite"?
Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
Frank

Pricing Routine is not getting called after transport to quality

Hello,
We have created a new routine under Condition base value formulas. We have done all the required settings so that it is called while creating / changing sales order. Our routine is working fine in Development server but after transporting it to quality it is not getting called. We can see the routine in VOFM but in debugging mode the system is not able to find the routine.
Can anybody please tell me what setting is missing in quality?
Thanks in Advance.
Priyanka.

HI,
Pls ececute this report RV80HGEN in SE38 tcode then only the routine will works for first time.
Regards,
kishore.

I need a BADI that's called after Shipment Cost Document is written...

Hi,
I'm trying to locate a BADI that gets called after a Shipment Cost Document is created ( Written to file ) OR one that gets called before the lines are transfered to invoicing.
I need to alter some of the data on tables VFKP items & VFKN acct determination. We are getting condiotions with zero prices that I need to remove.
Any suggestions appreciated......

You will probably not find a BADI to suit your needs. However if you look at include program MV45AFZZ you should find two subroutines: USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT. You can put the code you need directly into these subroutines. If these have not been changed yet on your system, you will need an access key to make these changes.
Please read the documentation in the header of the subroutines for furtner information on when they are called.
Best Regards,
Chris H.

Badi trip_ web_ check not getting called in Portal

Hi
We have implemented the trip_web_check badi to check the validation on the Advance entry while Travel request screen (standard). Two days back validation was working fine.
But today it is not getting called. Please give you inputs if you have any idea?
Also tell me if any other settings in SPRO already we have assigned the badi in spro

Hi,
Donu2019t go for the NOTE directly
1st you need to check basic things ...
( take a help of ABAPER )
Check where the badi implementation is active or not ...You can do this by "SE19" give the BADI implementation name and check where its Activate or not.
If it is activate then set the User specific (the user which your are using on Portal) break-point in the method and check where its get stop in BADI .
Barin : 1st we need to check some basic things like where the BADI is Active or some techical issue like coding etc ...NOTE will be last option to use.
Cheers,
Vivek D Jadhav

Badi is not getting called in IC Web client in Quality server

Hi Experts,
I have implemented a badi CRM_SERVICE_CONTRACT which determines contract based on component no. in complaints.
My badi is working fine in development server in IC web client but in Quality server the badi is not getting called in IC Web client.
The badi is active in both the servers.
Please let me know what configurations to look into.
Regards,
Sangeeta.

Hi,
Did you try to debug till the point where the BADI is supposed to get called? You may set a break-point in your Dev system to check the call stack and based on that set break-points in your QA system and see why this is not getting called?
Also, check all the implementations of the BADI got transported to the QA system. Check if there is any filter on that badi.
Regards
Prasenjit

CRM_ISA_PRICING_ITMDATA_GET is not getting called

Hi All,
The FM - CRM_ISA_PRICING_ITMDATA_GET (and BADI CRM_ISA_HDR_PRICING - NEW_ITEM_VALUES_READ) to pass additional pricing fields is not getting called during product catalog pricing . We added the below change to xcm->customer->modification->backendobject-config.xml and still is not working.
<configs>
<xi:include href="$/modification/backendobject-config.xml#xpointer(backendobject/configs/*)"/>
<config isa:extends="../config[@id='crmdefault']">
<businessObject type="PriceCalc">
    <params>
           <param name="doItemCalls" value="true"/>
      </params>
</businessObject>
</config>
</configs>
Even it is not working if we change the   <param name="doItemCalls" value="true"/> in xcm->sap->modification->backendobject-config.xml .
Any suggestions on how this FM (and BADI) will be called during product catalog pricing?
Thanks,
Rajinikanth G

Hi,
There was an authorization issue which configured in XCM and it was called after addaing proper authorizations.
Thanks,
Rajinikanth G

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

Custom enhancement spot not getting called.

Hello guros,
We are currently upgrading to ECC6 and I started playing a little bit with enhancement spots.
I've tried inserting my own enhancement spot using
ENHANCEMENT-SPOT ELI SPOTS ZELI_SPOT.
I've created the ZELI_SPOT badi definition and created a sample interface.
Then I implemenet an enhancement spot and implemented the BADI interface (Which by the way should have all its methods static right?).
Despite all objects being active, and the explicit "IMPLEMENTATION IS CALLED" on the badi implementation, my implementation is not getting called, Is there something im missing here?
I would also like to understand how in such a case do i actually transfer parameters to such a method.
Thanks a lot in advance,
Eli.

Hi,
Can you elaborate on where you have created the enhancement spot. If the enhancement spot you have created within some IF condition in the standard code, then it will get triggered only if the condition is true.
Regards,
Hari

ValueChangeListener not getting called

Hi,
Can you pls help me in solving this jsf problem- I have a dropdown menu, selectOneMenu which is populated with a list of countries, i want to apply a valuechangelistener on it so that my event is triggered whenever there is a value change on the menu. I've tried a lot but its not working, the form gets submit but my method "countryChanged" is not getting called. Am i missing something? can anybody give me some idea, im putting the code here:
testmenu.jsp
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<html>
<head>
<title>Page1 Title</title>
</head>
<body>
<h:form binding="#{form.form1}" id="form1">
<h:selectOneMenu value="#{form.country}" valueChangeListener="#{form.countryChanged}"                               onchange="document.forms.form1.submit();" style="position: absolute; left: 72px; top: 144px; width: 216px;                                                             height: 24px">
<f:selectItems value="#{form.countryNames}"/>
</h:selectOneMenu>
</h:form>
</body>
</html>
</f:view>
TestForm.java
package com.cad.ui.report.bean;
import java.util.HashMap;
import javax.faces.component.html.HtmlForm;
import javax.faces.event.ValueChangeEvent;
* @author Tripti
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments
public class TestForm {
     private HtmlForm form1 = new HtmlForm();
     public HtmlForm getForm1() {
          return form1;
     public void setForm1(HtmlForm hf) {
          this.form1 = hf;
     public TestForm(){super();}
     private String country;
     private HashMap countryNames;
     public void countryChanged(ValueChangeEvent vce){
          System.out.println("countryChanged called" +vce.getNewValue());
public String getCountry() {
          return country;
public HashMap getCountryNames() {
          //System.out.println("getCountryNames called");
          countryNames = new HashMap();
          countryNames.put("India","India1");
          countryNames.put("France","France1");
          countryNames.put("Denmark","Denmark1");
          return countryNames;
public void setCountry(String string) {
          country = string;
public void setCountryNames(HashMap map) {
          countryNames = map;
Faces Config Mapping
<managed-bean>
<description>Test Menu Bean Holder</description>
<managed-bean-name>form</managed-bean-name>
<managed-bean-class>com.cad.ui.report.bean.TestForm</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
I'll greatly appreciate your help.
Cheers
Tripti.

did you change the menu's value before submitting the
form ?
I think the listener is called only if the value has
changed.Ofcourse i changed. I've found the reason of the problem. I used HashMap to build the menu items,i changed it to Collection of SelectItem's and it worked. But i still dont understand why HashMap should not work!!
Anybody has some idea??
Cheers
Tripti.

CommandButton actions not getting called when "disabled" element present

MyObjectForm.jsp contains commandButtons for "add", "update" and "delete" that are enabled/disabled according to the value of the bound id field.
MyObjectForm.jsp
<html>
<body>
<f:view>
<h:form id="create">
<h:inputHidden id="id" value="#{myObjectBean.id}" />
<h:panelGrid columns="3" border="0">
Name: <h:inputText id="name"
requiredMessage="*"
value="#{myObjectBean.name}"
required="true"/>
<h:message for="name"/>
// other fields
<h:commandButton id="add"
value="Add" disabled="#{myObjectBean.id!=0}"
action="#{myObjectBean.add}"/>
<h:commandButton id="update"
value="Update" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.update}"/>
<h:commandButton id="delete"
value="Delete" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.delete}"/>
<h:commandButton id="delete2"
value="Delete (no disabled element)"
action="#{myObjectBean.delete}"/>
</h:form>
</f:view>
</body>
</html>In its managed bean, MyObjectBean, if an id parameter is found in the request, the record is read from the database and the form is populated accordingly in an annotated @PostConstruct method:-
MyObjectBean.java
public class MyObjectBean {
private int id;
/** other properties removed for brevity **/
public MyObjectBean() {
LOG.debug("creating object!");
@PostConstruct
public void init() {
String paramId = FacesUtils.getRequestParameter("id");
if(paramId!=null && !paramId.equals("")){
getById(Integer.parseInt(paramId));
LOG.debug("init id:"+id);
}else{
public String delete(){
LOG.debug("delete:"+id);
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.removeMyObjectVO(myObjectVO);
return "";
public String add(){
LOG.debug("add");
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.insertMyObjectVO(myObjectVO);
return "";
public String update(){
LOG.debug("update:"+id);
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.updateMyObjectVO(myObjectVO);
return "";
public void getById(int id){
MyObjectVO myObjectVO= myObjectService.findMyObjectById(id);
ModelUtils.copyProperties(myObjectVO, this);
/** property accessors removed for brevity **/
}When no parameter is passed, id is zero, MyObjectForm.jsp fields are empty with the "add" button enabled and the "update" and "delete" buttons disabled.
Completing the form and clicking the "add" button calls the add() method in MyObjectBean.java which inserts a record in the database. A navigation rule takes us to ViewAllMyObjects.jsp to view a list of all objects. Selecting an item from the ViewAllMyObjects.jsp list, adds the selected id to the request as a paramter and a navigation rule returns us to MyObjectForm.jsp, populated as expected. The "add" button is now disabled and the "update" and "delete" buttons are enabled (id is no longer equal to zero).
Action methods not getting called
This is the problem I come to the forum with: the action methods of commandButtons "update" and "delete" are not getting called.
I added an extra commandButton "delete2" to the form with no "disabled" element set and onclick its action method is called as expected:-
commandButton "delete2" (no disabled element) - works
<h:commandButton id="delete2"
value="Delete (no disabled element)"
action="#{myObjectBean.delete}"/>Why would "delete2" work but "delete", not?
commandButton "delete" (disabled when id is zero) - doesn't work
<h:commandButton id="delete"
value="Delete" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.delete}"/>The obvious difference is the "disabled" element present in one but not the other but neither render a disabled element in the generated html.
Am I missing something in my understanding of the JSF lifecycle? I really want to understand why this doesn't work.
Thanks in advance.
Edited by: petecknight on Jan 2, 2009 1:18 AM

Ah, I see (I think). Is the request-scoped MyObjectBean instantiated in the Update Models phase? If so then the id property will not be populated at the Apply Request Values phase which happens before this, making the commandButton's disabled attribute evaluate to true.
Confusingly for me, during the Render Response phase, the id property is+ set, so the expression is false (not disabled) giving the impression that the "enabled" buttons would work.
So, is this an flaw in my parameter passing and processing code or do you see a work around?

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Production Reporting out put not getting deleted after 30mins what we set.

Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
Venkat

Hi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek

BAdi not getting called after applying CRM7.0 ehp1

Similar Messages

Maybe you are looking for