Balance Carry Forward with New GL

hi,
I am trying to do balance carried forward using the new GL and I expect to see retained earnings splits by profit center and segment. I was able to run the program and see the revenue and expenses roll into Retained Earnings account split <u>by profit center</u>, however it did NOT split by segment. The balance in retained earnings account shows split by profit center with BLANK segment.
I have setup my configuration as:
- Turn on the business scenario to use Partner Profit Center and Partner Segment
- Specify the account range in the document split. I specified retained earnings account as balance sheet account
- I have setup segment as mandatory field in the document splitting configuration
- I setup the activate the document split and setup default profit center/segment
Can you tell me if I am missing something in the configuration or there is something wrong with the system.
Thanks, Tony

Hi,
Voor profit centers you have to run the balance carried forward in PCA.
Paul

Similar Messages

  • Balance carried forward for New GL

    Hi Expert,
    I would like understand about the balance carried forward for AP and AR in the New GL.
    When executing the program in test run mode, user will download the balances and try to tie to the recon accts in trial balance. The openning balance generated by the program should tie to the last fiscal year closing balance. But apparently, it is not. There is a difference. And after checking, the difference seem to the opening balance that aready exist in the new FY.
    So, when executing the carried forward program, is the system transferring only the difference ? New posting or items not yet carried forward ?
    Thanks.
    Angel.

    Hi,
    FAGLGVTR - Balance Carryforward (New)  for GL carry forward
    F.07 - Balance Carryforward for AR/AP carry forward
    When you execute these programs system will carryforward all closing balance to subsequent year opening balance.  Any postings happened in previous year will dynamically carried forward to subsequent year after executing this program.  If you find any mismatch, you can again execute this program.  It will not create any impact.
    Hope this clarifies your doubt.
    Best Regards,
    Madhu

  • Balance Carry Forward in New GL - Substitute RMVCT

    Hi,
    We have assignet the Consolidation Scenario to our main ledger in New GL, so that the field RMVCT is part of the FAGLFLEXT table.
    We would like to have a unique movement code in the balance carry forward, for example F00.
    We can map any filled movement code to a specific carry forward movement code, that's fine (table T856 allows that in the definition of the movement code).
    But, and that is the issue, for balance sheet account without movement code, the balance carried forward has also no movement code, and I don't see the way to substitute the value to get F00 also for these account (there is no BSEG entry for the balance carry forward operations).
    Thanks for an anwser.

    Hi,
    Voor profit centers you have to run the balance carried forward in PCA.
    Paul

  • Problem after balance carry forward with t-code: FAGLGVTR

    Hi,
    I have run that t-code: FAGLGVTR for balance carry forward. Balance transferred correct according to GL Account but when I run t-code u201CS_ALR_87012082u201D for vendor balance for respective recon GL code its show difference. Please let me know how I am make it OK.
    Thanks & Regards,
    Hemant Maurya

    Hi hemant,
    There might be some differences between Recon Gl account & individual vendor balances, this is because when you do the FAGLGVTR & after dat again if u post some open invoices then in Recon.Gl account,balances will get automatically updated but not in vendor balances so what you have to do is RUN F.08 again & carry forward the vendor balances then only both these will be on same platform.
    Thanks & Regards
    Anuj Agarwal

  • Budget balance carry forward to new year fiscal year

    Hi,
    Currently, our setting for Funds Management Master
    Data is year-dependant. Now, our user request for a budget carry
    forward from one year to another year. So, we are trying to the fix the
    configuration.
    My question is, can we do the budget balance carry forward if the master data is year-dependant. If can, how to do that?
    For your information, our system is SAP R3 version 4.7C and using the BCS.
    Appreciate your advise on this matter.
    Thanks and regards

    Hi,
    copy cost center planning:
    kp97  - copy plan to plan
    kp98  - copy  actual to plan
    Internal order copying
    ko14 - copy plan to plan
    ko15- copy actual to plan
    all the best
    prasad

  • Balance carry forward to new financial year.

    Hai SAP Guru
    I  run the transaction f.07 for  transfer of balance pertaining to vendor and customer to new fianncial year.
    Though the run took place with out any errors and all the balance were carry forwarded, it had various line items pertaing to individual vendor and customer, and when i cross verified  with the individual balance it was not tallying but the consolidated balance of customer and vendor were correct, when  i ran the GL balance transfer.
    a)  I want to know whether the above procedure is correct, is there any other method  of cross
         verifiying the correct  of transfer entires.
    b) When the transfers are done , a consolidated amount is trnasferd to vendor/customer account
        or a single line item as it is now displayed  in my system.
    Thanks.

    Hi,
    There is nothing to do with balance carryforwarding.
    After the end of FY you need to run F.07 and F.16 once, since this is a technical step from the business point of view.
    After doing the above function also, you can still post transactions to old FY, and those will be automatically adjusted to the opening balance for the new FY.
    Or else you can re run the aboce programs again, hence it does not make any diff in any point of view.
    For checking the balances you need to use FD10N and FK10N by using respective recon accounts in the selection screen.
    Thanks,
    Srinu

  • Vendor.Balance.Carry.Forward.With.SCATT

    Can anybody enumerate the steps to carry forward balances of Vendors
    1. Without SCATT, TCode would be preferred here.
    2.With SCATT.
    Thanks.

    Hi,
    Carry forward of Vendor balances is quite simple. Execute it with transaction code  F.07.
    Thanks
    Murali.

  • Balance Carry Forward to new fiscal year wrongly

    Dear All,
    Currently we are in 2012 fiscal year. our fiscal year starts form July to June.         
    The problem is user has posted some of the documents in 2010 fiscal
    year 13th period after Changed the G/L account on 24.05.2010 (2010
    Fiscal year) from Balance sheet account to Profit & loss account by
    giving the document date is 03.09.2009 (2010 Fiscal Year) and
    30.06.2010 (2010 Fiscal Year).
    These 2 documents are still stored in BSEG table as a Balance sheet
    items. Why these stored in this table even after change the G/L account
    to Profit and loss account?
    When we do the Balance carry farrowed to 2011 fiscal year, the same
    amount is carry farrowed to 2011 fiscal year. Why it has carry farrowed
    to new fiscal year even though it is a Profit and loss account.
    Could any body give the solution for this issue.
    Thanks and regards,
    N. Rao

    Dear Ravi,
    Thanks for your replay.
    Actually now we are in 2012 fiscal year. the documents are posted in 2010 fiscal year 13th period. It is not suggestible to do carry farrowed from 2010 to 2011 fiscal year because of the reports were already submitted.
    We have done testing in quality system that reversed the posted documents by giving the same dates and later we did the f.16 to carry farrowed from 2010 to 2011. Then the balance was became "0" at 2011 fiscal year beginning. But it is not suggestible in production.
    Could you please suggest any alternative solution or any correction program.
    Regards,
    Mr. Rao

  • Gl Balances Carry Forward FY New

    Hi Expert,
    We are going to carry Forward for GL Balances for Last Fiscal Year 2013 , now we are open and carry forward for the same from 2013 to 2014, kindly let me know, there is any Precaution for that before going to carry Forward the Gl balances. as well Vendor and Customer.
    Kind regards
    Pranav Kr. Gupta
    SAP FICO Consultant

    Hi Ajay sir,
    AJAB then AJRW or coz two days before same thing getting error Fiscal year not open for Asset i did same thing AJAB the AJRW, simententiously, then problem has been resolved, if m nt wrong,
    now next month for we will go for Deperication posting for FY 2013, we are following April to March Financial Year. and we are not doing periodically once in a Year .
    so at the time of Depreciation system will thorw any error.. coz till now we ve nt try even in Test Run as well.
    note : but sir, my Question is if i RUN AFAB for Depreciation for Fiscal Year 2013, the balance of GL will reduce from asset . and we have done GL Balances Forward for FY 2013 to 2014, after posting GL balance will not suppose to show.. in this wht should i do. if m wrong to telling , kindly correct me.
    Thanks
    pranav Kr. Gupta

  • GL balance carry forward special period 13 to new fiscal year and Rec acct

    Hi,
    would like to seek for your advice as below question/problem.
    a) User now is doing the year end closing. Normally the closing is up to the period 12 and for the purpose of track the adjustments made by the management and auditors user post to period 13 2008 from the pervious financial year. Our concern is when perform the GL Balance carry forward to new fiscal year which is 2009 does the system carry forward the GL adjustment figure from period 13 to the new fiscal year on top of that when we perform the GL balance carry forward to new fiscal year 2009 and later on find out there is an audit adjustment that need to done and user post in the period 13 fiscal year 2008 can the adjustment auto post to the new fiscal year?
    b) Can we change the Rec account in the vendor master as currently user need to change the vendor from difference Rec account which from joint venture to subsidiary account code? If involve the SPRO configuration how where should we configure? After we change the configuration does all the posting from one Rec account subsidiary will auto post to another Rec account Joint venture?
    Kindly advice.

    Hi,
    Thank you for the prompt reply.
    a)could you provide the path/T-code to view the  vendor master activity screen layout configuration field status for reconciliation account should be Optional.
    b)Beside,what the impact of change the reconciliation account from one to another? It is neccesary/must to do the balance sheet adjustment for change the reconcilation account?
    Can we post the balance through the manual JV (F.02)with the document type is ZD(Debit Note) to post the balance of old reconciliation account to the clearing account and then change of the reconciliation account to the new account then reverse the posting of the JV? By doing so what is the impact in the system? In this scenarion do we need to do the balance sheet adjustment?
    c) You mention balances from the old recon will not be posted to the new reconcilation account unless I do a balance sheet adjustment it is mean after I run the balance sheet adjustment the balance from the old reconcilation account will auto post to the new reconcilation? What other impact will effect the system?
    d) If the company never run the balance sheet adjustment before and due to the scenerion mention above they run the balance sheet adjustment for the first time what are the impact in the system for the company that only have one business area and also for the company which have more than one business area?
    e) What are the prerequisite step/configuation/setting need to be setup in order to run the balance sheet adjustment as the company perviously never run the balance sheet adjustment before? Kindly provide reference/document/guide.
    e) Change of reconcilation account does it related/impact to the account group of vendor master?
    Please help.

  • Balance Carried Forward problem

    Hi Experts,
    when running the Ledger for one range of posting period, the customeru2019s line items and cumulative balances are separated into 2 different reconciliation accounts.
    While running for the next yearu2019s posting period , the Carry Forward Balances of Customers from previous year are aggregiated into one G/L account ,other account 0 balance is carried forwarded.
    My program is fetching from table KNC1 which will have Balance carry forward of the two combined accounts which is going to 1st account.
    Please let me know any table or FM where I can get Balance Carry Forward with passing Fiscal Year, Customer Code, GL Account_.( KNC1 table doesn't help in my case)_
    Please let me know.
    Thanks and Regards,
    Kiran.

    First look at [Fiscal Year Change Documents|https://websmp105.sap-ag.de/fiscalyearchange]
    Then look for those BAPI
    - BAPI_AR_ACC_GETCURRENTBALANCE  Closing balance of customer account in current fiscal year       
    - BAPI_AR_ACC_GETKEYDATEBALANCE  Customer account balance at a key date                           
    Regards

  • New GL implemented, problems in F.01 and trail balance report and balance carry forward.

    Dear Friends,
    One of the my client recently implemented New GL in the Dev system, and getting posted the documents. now we are facing the many problems in the Dev system.
    1. F.01 Financial statement report not generating for the year 2008 to till 2014 fiscal years.
    2. the same in trail balance also not generating data form the year 2008 to till 2014 fiscal years.
    3.system is asking the carry forward the balances form the 2008 to till, when we try to carry forward the 2008 year amount only forwarding for the all the fiscal year, not adding the other balances.
    i went through some forums and i did the some analysis on this, after implementing new GL the table GLT0 was desble, data was not updated in the GLT0 all the data has been moved to FAGLFLEXT table. later i activated the table GLT0 and able to storing the data both the tables.
    now i want to see the all my privious year report in the DEV system. all the data is there in the tables expect GLT0. how can i recover reports as well as how can i do the carry forward balances?
    even still i have not carry forward for the 2014 balances, those balances also not there in the reports? but data is there in the table.
    Please help me on this.
    Regards,
    Krish

    Hello,
    balance carry forward is done with TCd.
    FAGLGVTR
    when you are on SAP nGL.
    any further quesitions?
    By the way why don´t you do searching?
    all the best erwin

  • Balance carry forward ( FAGLGVTR - Balance Carryforward (New))

    Hello experts,
    can you explain us postings when we execute transaction FAGLGVTR.
    Does all P&L accounts will be closed in previouse year 2007 and posted to retained earnings account ?
    We see that balance is carry forwarded to retained accounts in new year 2008 but P&L accounts does not have any posting to their oposite sides in previouse year 2007.
    Also because non of the real postings had hapened on retained earing account, how can we now do closing postings to capital Please help us if you can
    Edited by: Dusan Stojanovic on Feb 20, 2008 6:35 PM
    Edited by: Dusan Stojanovic on Feb 20, 2008 6:36 PM

    Hi,
    When the balances are carried forward, the net of all values of the P&L G/L Accounts are transferred to the Retained Earnings Account. There is no real accounting posting done in the system for this. But when you go to the new year, the P&L Accounts are shown with zero opening balance as their balances have got transferred.
    For Balance Sheet Accounts, the balances have to be carried forward to the new year and for P&L they have to be set to zero. Hence the balance carry forward transfers the net of all values in P&L G/L Accounts to the retained earnings account which is a balance sheet account.
    This values can be seen in G/L Balance Report as carried forward values for the retained earning G/L.
    Hope this helps.
    Ramanand Bhatt

  • Customer line items with balance carry forward no opening balance

    Hello FI Experts,
    We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
    Requirement Here Is:  The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
    Thanks for helping on this issue.

    Hi,
      Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
    Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
    If you are checking in the middle of the year, then the balance will not be carry forwarded.
    Regards,
    B. Radhika.

  • Migration cockpit of new G/L- balance carry forward

    Hi,
    I have a question regarding the migration cockpit for new G/L. This a prepaid service of SAP and we are at test stage of migration cockpit. Before migration to new G/L, we have
    posted year-end-postings t-code
    F_TR_01 for Turkey , program RFSUMB00
    for all P&L accounts and balance sheet
    accounts for year 2007. Thus, all G/L
    accounts give a balance of zero for
    year 2007. Among the migration cockpit
    activities ,do we still need to
    execute transfer balance carry
    forward step?
    Kind regards,
    Gökçen.

    Hello Gokcen,
    In your case, you can execute the ' Transfer balance carry forward' step of the GL Migration cockpit, for two reasons:
    1. Since the migration cockpit moves data consistently from the classic GL database tables to the (New) GL database tables, this step needs to be executed.
    2. The cockpit has steps synchronized so that there is no harm in executing a step that may seem redundant. So, better to execute the step than not
    Regards,
    Sangeeta

Maybe you are looking for