BAM: Problem with 'Binding' while creating event linkage

Hello colleagues.
We have an ECC 6.0 and a PI 7.1 system. I want to create a prototype using the features of BAM.
In transaction SWF_BAM, i tried to create a binding for the OB proxy parameters and the event object parameters. Unfortunately, the proxy class no longer has the method 'EXECUTE_ASYNCHRONOUS' and hence i am unable to create the binding.
Any pointers on how to go about this. Please also let me know if i am not doing it the right way.
Regards,
Keshav

HI Keshav,
Try writing the method which u create in the same name as the implementing class; also known as the provider class. I have faced the same problem, and when writing the method, use the operation name, which is used in PI 7.1, while creating the interface, and there shouldn't be any problem during Binding.
Regards,
Abhisek.

Similar Messages

Problem with MB1C while creating sales order stock

Hi all,
I am working in MTO scenario. I have taken the requirements type as "KE" & assigned the requirements class "ABC". This "ABC" is copied from requirements class "40".
I have created a sales order with 1 line item and in MB1C when i create the stock, the system creates the stock for the sales order.
Problem: I start with creating the inquiry - quotation on the basis of inquiry - sales order on the basis of quotation. Now when i go to MB1C to create the sales order, I get the following error:
"Account assignment cannot be carried out because of different origin no."
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 108 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document.
Also if for the same sales order i run the MRP using MD50, then in the transaction code MD04 - the system shows the reference of the "inquiry document number" for the production order. The production order should take the reference of the sales order number.
For the requirements class in the fields "Acct Assgt Cat" & "Valuation" i have selected "M"
Regards,
Allabaqsh G. Patil
Message was edited by:
allabaqsh patil

Hello Allabaqsh,
How did you solve the problem?
I am facing the same problem.

View not copied or enhanced with wizard Error while creating Event Handler method in Z Component

Hello Friends,
In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.

Hi,
Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters. I dont have have the system right now. Please check any existing event import export parameters.
Check out do handle event method in the same class.
Redefine that method. Call that event method in this handle method. See existing code for reference.
Attach that event to the button on click event in .htm page.
Regards,
Bhushan

Problem with binding in rich:tabPanel

I have the problem with binding in rich component. In the first request the tabPanel work fine, but in the second request the component is not displayed. When i remove binding="#{organizationController.tabPanel}" everything works well. Anybody can help me? thanks.
<rich:tabPanel style="height : 63px; width:auto; border:0px;" id="panelOrganizationForm" binding="#{organizationController.tabPanel}" >
<rich:tab label="Dados da organizacao" id="tab1">
 <h:panelGrid columns="2" id="panelGridOrganizationForm">
 <h:outputText value="Id: " id="idlabel"/>
 <h:inputText value="#{organizationController.organization.organizationId}" styleClass="input" id="organizationId" required="true"/>
 <h:outputText value="Nome: " id="nameLabel"/>
 <h:inputText size="60" value="#{organizationController.organization.organizationName}"
 styleClass="input" id="organizationName"/>
 </h:panelGrid>
 </rich:tab>
</rich:tabPanel>
<a4j:commandButton value="Voltar" action="back" id="bot" immediate="true"/>

Guys
Thanks a lot, both of your replies are immensely instructive. Maybe a little background on what I'm trying to do. In the table, I have header rows with dependent line rows. When a check box is ticked in the header, I want the corresponding check boxes in the dependent lines to be checked automatically (in slave fashion and ideally without using JavaScript). My idea was to update the bound components (for the lines) from within the Bean (in response to change on the header). However, given there's only a single component for each column in the table, this of course doesn't make sense.
I'm trying to get to the typical MVC workflow of a) user updates a View component, b) Controller detects the change and updates the Model, c) The Model fires a property change event, which the View detects and updates appropriately. What's the way to achieve this in JSF (by design)?
Here's a simple fragment (which does not work):
 <h:dataTable value="#{bean.lines}" var="line">
 <h:column>
 <h:outputText value="#{line.id}"/>
 </h:column>
 <h:column>
 <!-- (1) This is the master and (2) should refresh on update here --/>
 <h:selectBooleanCheckbox onchange="submit()" value="#{line.lineSelected}"/>
 </h:column>
 <h:column>
 <!-- (2) This is the slave and I want this to update in response to a change of (1) above --/>
 <h:selectBooleanCheckbox value="#{line.slaveSelected}"/>
 </h:column>
 </h:dataTable>In the setter method for lineSelected, I'm setting slaveSelected to the new value but the View is not refreshing based on this. How do I get the View to update (each dependent line) based on the new values for slaveSelected?
Thanks again
Lance

Problem in Function while creating dependency not getting solved

Hi All,
I am not getting any solution even after debuging it many times,
This is second time I am posting same problem , Please help me out if possible
I am working on a Program in which I have to create Class , local and global dependency -
For class createion i am using
BAPI_CLASS_CREATE
For local dependency i m using
CAMA_CLASS_MAINTAIN_DEP
For Global dependency i am using
CAMA_CLASS_ALLOCAT_GLOB_DEP
Now my problem is that I am able to create Class and only 1 of the dependency either local or global whihever function I am calling first
But while debugging program I am able to create Class as well as both dependencies successfully
Please can any one tell while this is runing successfully only at the time of debugging
Code -
have used -
CALL FUNCTION 'BAPI_CLASS_CREATE'
EXPORTING
CLASSNUMNEW = TCLASS-CLASS
CLASSTYPENEW = TEXP1-KLART
CLASSBASICDATA = CLASSBASICDATA
CHANGENUMBER = SAENNR
TABLES
CLASSDESCRIPTIONS = CLASSDESCRIPTIONS
CLASSLONGTEXTS = CLASSLONGTEXTS
CLASSCHARACTERISTICS = CLASSCHARACTERISTICS
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = TRET2.
CALL FUNCTION 'CAMA_CLASS_ALLOCAT_GLOB_DEP'
EXPORTING
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
CLASS_DEP_ASSIGN = T_GLBDEP
EXCEPTIONS
ERROR = 1
WARNING = 2
OTHERS = 3.
CALL FUNCTION 'CAMA_CLASS_MAINTAIN_DEP'
EXPORTING
CLASS = TCLASS-CLASS
CLASS_TYPE = SKLART
DEPENDENCY_DATA = T_DEPDATA
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
SOURCE = TSOURCE
EXCEPTIONS
ERROR = 1
WARNING = 2.
I have no problem in creating Class using Bapi ,
Problem I am facing here in creating Local and global dependency together which i am able to create in debugging mode only otherwise either Local or global whichever function i am using first
Regards
Preeti

duplicate post locked
Re: Problem in Function while creating dependency

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
Can you help?

Hi Marv13, disregard my last post. The 6520 does have eFax capabilities and the support document I provided a link to needs updating. If you contact HP Cloud Services phone support they will be able to resolve this issue for you. The number and available times are posted below:
HP Cloud Services
1-855-785-2777
Hours of Operation
Monday-Friday 8am-11pm ET
Saturday 10am-6:30pm ET
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Compilation problem with templates while using option -m64

Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex Vinokur

Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed.

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried to replug the usb msg show up by saying usb not compaitnle. With this mac and take me to disk utility and thanks for replying

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

I Have Purchase ipod touch with ios5 . while create apple id the none option in Payment Method dose not Apper . I dont have any visa or mastercard . plese help ?

I Have Purchase ipod touch with ios5 . while create apple id the none option in Payment Method dose not Apper . I dont have any visa or mastercard . plese help ?
How Shold I Proceed

Hello JadeGirl13,
Thanks for using Apple Support Communities.
Please see the support article below that explains why you may not be able to select none as a payment type.
Why can’t I select None when I edit my Apple ID payment information?
http://support.apple.com/kb/TS5366
Take care,
Alex H.

Problem with binding in h:dataTable

Hi
I have a problem with h:dataTable, where the table rows are bound to objects (Bean$Line) nested within a backing bean (Bean).
JSP:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<f:view>
 <head>
 <link href="styles.css" rel="stylesheet" type="text/css"/>
 <title>Sandbox</title>
 </head>
 <body>
 <h:form>
 <h:dataTable value="#{bean.lines}" var="line">
 <h:column>
 <h:outputText value="#{line.id}"/>
 </h:column>
 <h:column>
 <!-- using value = line.lineSelected here works (assuming boolean property Line.lineSelected) --/>
 <h:selectBooleanCheckbox binding="#{line.lineSelected}"/>
 </h:column>
 </h:dataTable>
 </h:form>
 </body>
</f:view>
</html>Bean:
package com.test;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.UISelectBoolean;
public final class Bean {
private final List<Line> lines;
public Bean() {
 lines = new ArrayList<Line>();
 lines.add(new Line("one"));
 lines.add(new Line("two"));
 lines.add(new Line("three"));
public List<Line> getLines() {
 return lines;
 * Nested class in order to access containing class
 * properties etc.
public static class Line {
 //private boolean lineSelected = false;
 private UISelectBoolean lineSelected;
 private String id;
 public Line(String id) {
 this.id = id;
 /*public boolean isLineSelected() {
 return lineSelected;
 public void setLineSelected(boolean lineSelected) {
 this.lineSelected = lineSelected;
 public UISelectBoolean getLineSelected() {
 return lineSelected;
 public void setLineSelected(UISelectBoolean lineSelected) {
 this.lineSelected = lineSelected;
 public String getId() {
 return id;
 public void setId(String id) {
 this.id = id;
} // Line
}The setup works when I use value="#{line.lineSelected}" (assuming the property is defined as boolean in Bean$Line) but as soon as I use a binding, I get the following exception:
com.sun.rave.web.ui.appbase.ApplicationException: javax.servlet.ServletException: javax.el.PropertyNotFoundException: Target Unreachable, identifier 'line' resolved to null
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:594)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:325)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:317)
faces_config:
<faces-config version="1.2"
 xmlns="http://java.sun.com/xml/ns/javaee"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
 <locale-config>
 <default-locale>en_GB</default-locale>
 <supported-locale>en_GB</supported-locale>
 </locale-config>
</application>
<managed-bean>
 <managed-bean-name>bean</managed-bean-name>
 <managed-bean-class>com.test.Bean</managed-bean-class>
 <managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>What am I missing here?
Help much appreciated
Lance

Guys
Thanks a lot, both of your replies are immensely instructive. Maybe a little background on what I'm trying to do. In the table, I have header rows with dependent line rows. When a check box is ticked in the header, I want the corresponding check boxes in the dependent lines to be checked automatically (in slave fashion and ideally without using JavaScript). My idea was to update the bound components (for the lines) from within the Bean (in response to change on the header). However, given there's only a single component for each column in the table, this of course doesn't make sense.
I'm trying to get to the typical MVC workflow of a) user updates a View component, b) Controller detects the change and updates the Model, c) The Model fires a property change event, which the View detects and updates appropriately. What's the way to achieve this in JSF (by design)?
Here's a simple fragment (which does not work):
 <h:dataTable value="#{bean.lines}" var="line">
 <h:column>
 <h:outputText value="#{line.id}"/>
 </h:column>
 <h:column>
 <!-- (1) This is the master and (2) should refresh on update here --/>
 <h:selectBooleanCheckbox onchange="submit()" value="#{line.lineSelected}"/>
 </h:column>
 <h:column>
 <!-- (2) This is the slave and I want this to update in response to a change of (1) above --/>
 <h:selectBooleanCheckbox value="#{line.slaveSelected}"/>
 </h:column>
 </h:dataTable>In the setter method for lineSelected, I'm setting slaveSelected to the new value but the View is not refreshing based on this. How do I get the View to update (each dependent line) based on the new values for slaveSelected?
Thanks again
Lance

Problem with Access Policies (create multiple resources)

I'm having a problem with Access Policies:
The first policy must create a resource.
And the following policies should create childs on the resource.
The problem here is that when policies will add the childs, the resource is not provisioned yet.
And then each one will create a resource but i just want one resource with the childs.
When the resource is already provisioned, the policies update this resource properly.
How can I fix this?
tks

Ricardo,
I had a similar problem. In a post-process handler I was managing the user membership in specific roles through the removeMemberUser and the addMemberUser of the tcGroupOperationsIntf class.
The last parameter of this method was a boolean which, when true, would automatically trigger the access policies programmatically in the post-process.
The problem is that there also is an OOTB event handler for triggering access policies, so I was basically triggering the access policies twice and duplicated resources were appearing.
Hope this helps.
Cheers

Query with bind var created under apex to generate xml data

Hi all;
BiP: 10.1.3.4
Apex: 4
DB 10G
Goal: want to generate a report by running a query with bind variables under apex.
problem: when attempted to create a query under shared components in apex, at the downloading xml data stage, I always get "no data found" eror. Thus I can't save xml data for further report work. This only occurs when bind var involved. I have tticked "incl. session variables" and added the item but to no avail.
Does anyone know how to do this and get the xml data to recive the bind variable ?
Thanks.
lulu

To get the xml data, sql query has to return something. Why the sql is not returning anything can be better investigated outside the BI Publisher with special tool like SQL Developer or TOAD. There you have to run your query and make it working. One of the steps would be to try the sql without the parameter, see what data it brings back and go from there. One of possibilities why the parameter kills the output may be the NULL values involved, but you need to try the sql outside the BIP first.

Problem with TrayIcon and mouse events

Hi,
I am trying to listen for a mouseEntered event on a TrayIcon.
This is the code i am using:
final TrayIcon icon = new TrayIcon(getImage(), "tray icon");
final SystemTray tray = SystemTray.getSystemTray();
try {
tray.add(icon);
}catch (AWTException e) {System.out.println("TrayIcon could not be added.");return;}
icon.addMouseListener(new MouseAdapter() {
@Override
public void mouseEntered(MouseEvent e){
System.out.println("works");
}});The icon is correctly shown in the tray bar, but the mouse entered event is not working.
I have to say that i am using the exactly same code to achieve the same effect on a JButton and it works without any problem.
Is there anything wrong?
Thanks,
Nite

is there a way to request my thread to be moved into Swing section? Well, the idea is to post the question in the proper forum in the first place.
yes, but i didnt find anything related to my problem.Really, I found posted examples of using a MouseListener.
Does your code work for other events or is the problem only related to mouseEntered() events (which may not be supported, I don't know since I don't have the proper API to use TrayIcons)?
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Then maybe others can test your code or see something else wrong.

BAM: Problem with 'Binding' while creating event linkage

Similar Messages

Maybe you are looking for