BAPI for modify "engineering change request" - Trx CC32

Hi abapers,
someone knows a bapi to modify an engineering change request?
Thx!

You can try with the below BAPI's.
BAPI_BUS1077_CHANGE              EHS: Change Specification
BAPI_BUS1091_CHANGE              EHS: Change Phrase
BAPI_BUS1240_CHANGE              Agent Determination
BAPI_CHARACT_CHANGE            BAPI for Characteristics - Change
Reward if it is useful.
Thanks,
Srinivas

Similar Messages

Bapi for create Engineering Change Management (ECR)

Hi abapers,
do you know a function module to create ECR? (Not CM!)
Thx

nobody knows a bapi for CC31 transaction?
Edited by: Andrea Peruffo on Sep 9, 2008 3:13 PM

Sending Engineering Change requests through ALE

dear all,
I want to send Engineering Change requests from one client to other can any one guide me if some standerd SAP Message type is provided for that? I have checked ECMMAS, it is not working for me.
Regards,
Nitin Verma

Hi Heena...
please check the fields present corresponding to the messagetype "HRMD_A" in trnsaction BD52. keep only the reuired fields and delete the remaining fields in BD52 trnsaction. if any changes happened in the required fields then change pointers will trigger an idoc. So, please check the fields present in BD52 transaction.
please let me know if you need any clarifications further.
Regards,
Lokeswari.

The CR 2010 for VS engine changes the margins and scales the report

The CR 2010 for VS engine changes the margins and scales the report but only when printing.
Environment:
OS: Windows 7 x64 / Windows 2008 x64
VS: VS 2010 x64
CR designer: CR 2008 SP3.5
CR engine: CR 2010 for VS SP1
We have upgraded the Crystal Reports engine from version 10 to u201CCrystal Reports 2010 for VSu201D and are now having major issues with printing reports to preprinted papers, giro forms etc. because the report margins are changed and the reports are scaled (when report elements are in non-printable area?). Reports with elements in non-printable area are shown correctly in print preview (CR 2010 CrystalReportViewer) but moved to printable area when printed. This behavior was different in CR 10. Changing the PrintLayoutSettings in code is ignored when printing.
Error u2013 The printed reports are scaled:
-     Print in the CR 2008 Designer SP2
-     CR 2010 for VS SP1
OK u2013 The reports are not scaled:
-     Print in the CR 2008 Designer SP3.5
-     Print in the CR 10 Designer
-     CR 10 engine
Test:
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D and validate that the box is located in 0,0 of the paper. Some of the box borders might be outside of the printable area but that is ok.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
h) Click the "Print" button and validate that the box is moved to the printable area which is wrong.
Notice: In the print dialog (CR 2010 for VS) select the "Layout" tab page and see that "Scale u2026" is selected and cannot be changed. This is different from the CR 2008 Designer even though that it is the same report file and printer.

I have done the requested test (and more - see below) and can not reproduce the issue.
Tests done
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the CR designer. Results in the box printing at 0,0 coordinate of the paper.
f) Repeat all of above with a text field report
g) Select u201CPrintu201D in the CR designer. Results in the text printing at 0,0 coordinate of the paper.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
g) Click the "Print" button
h) Text filed report test results in the text printing at 0,0 coordinate of the paper.
i) Box report test results in the text printing at 0,0 coordinate of the paper.
3) VS2010 IDE
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Preview report in the ID designer and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the IDE designer. Results in the box printing at 0,0 coordinate of the paper.
f) Run above report in code
g) Preview report and validate that the box is located in 0,0 in preview window
h) Select the "Print" icon in the CrystalReportViewer
i) Click the "Print" button
j) Text filed report test results in the text printing at 0,0 coordinate of the paper.
k) Repeat all of above with a new report that uses a text field rather than a box.
None of my reports have the option "No Printer" checked.
All of my reports have the option "Dissociate Formatting Page Size and Printer Paper Size" checked
From the above, you can see that all of the printing tests result in consistent printing, be it a report created in CR 2008 or CRVS2010, useing a box or a field. No difference in printing.
Suggestions:
1) I am not sure if you have followed the steps you recommended. E.g.; are you creating a new report or using your existing report? See if following the steps described reproduces the issue (it may be there is something specific to your existing reports)
2) Make sure you have the latest printer driver available for your printer
3) Try a different printer
4) Add a report to the VS2010 IDE and preview the report in the IDE of VS2010
5) Compare the "No Printer" and "Dissociate Formatting Page Size and Printer Paper Size" options
6) Consider creating a phone case so a support technician can troubleshoot the issue with you
- Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I am trying to find a function module or BAPI for internal order change. I

I am trying to find a function module or BAPI for internal order change. I did come across a function module ALE_INTERNALORDER_DB_CHANGE which directly updates the internal order using insert statements. Can i use this for internal order change or this is any other Function module for updating the internal order.
I dont want to use BDC as a option. Please suggest.

This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials

What is the BAPI for Inspection lot change - QA02??

Hi Guys,
Can anyone tell me plese, What is the BAPI for Inspection lot change - QA02?
Thanks

Hello,
This BAPI suppose to be able to do that for you:
BAPI_INSPLOT_SETUSAGEDECISION
Best regards,
Marcin

Is there any BAPI for creating Debit memo request

Hi all,
I used BAPI_ACC_BILLING_POST ,but it does not seems to help me.Is there any other BAPI for creating Debit memo request which takes.
Thanks and regards,
Meena.

hi,
I could find the following
Exit Name           Description
J_3RSINV
SDVFX001            User exit header line in delivery to accounting
SDVFX002            User exit for A/R line in transfer to accounting
SDVFX003            User exit cash clearing in transfer to accounting
SDVFX004            User exit G/L line in transfer to accounting
SDVFX005            User exit reserves in transfer to accounting
SDVFX006            User exit tax line in transfer to accounting
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
Regards,
Manish

Finding BAPI for inbound Delivery change(VL32N)

HI,
Plz help me For finding BAPI for inbound Delivery change(VL32N).
I have to pass delivery no as input parameter and should able to change shipment heder information
like Special processing indicator.
REGARDS,
Sunil Sahoo.

hi ,
there are three BAPI your requirment
1) BAPI_INB_DELIVERY_CONFIRM_DEC
2) BAPI_INB_DELIVERY_SAVEREPLICA
3) BAPI_INB_DELIVERY_CHANGE
but for requirment
The third BAPI
BAPI_INB_DELIVERY_CHANGE
will Sound promising. try this out
regards
Prashant

BAPI for MC62 tcode - change planing hierarchy.

Hi All,
Can anybody tell me the BAPI for MC62 tcode - change planing hierarchy.
It will be greatful if you send a sample code also.
Thanks,
Usha.P

It is better if u can raise this issue in SCM-PP forum

FM for the engineering change number to change status message to release

Hi,
I have a requirement to change the status message of engineering change number(transaction CC31 or CC32 ) automatically through a program. I have a thought of doing BDC but still i want to know any standard FM or class is available. Please help me if you have any suggestions.
Thanks in advance for your help.
Regards
Syed Samdani

Siva,
Did you check in Tcode OMSR.
Assign Fields to Field Selection Group - (OMSR)
Here you can define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance by assigning the field to a field selection group in OMSR.
Hope this Helps.
Vinodh Balakrishnan

Bapi for Scheduling material changes

hi,
is there a bapi for schedule changing of materials. the transaction for same is mm12.
please let me know if there is one.
regards
swanand

Hi there Swanand,
Did you find a BAPI for the update through MM12. Pleae let me know if you did as I am in need for that also.
Thanks.

Bapi For creation and change for Vendor Master and Customer Master

I am looking for BAPI to create and change Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06 but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
So in my case (i.e. to create and change Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

For general information,to find BAPIs associated with any business object :
Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business object
Mathews

BAPI for Process order change

Hi,
Can any buddy tell me the Bapi used for Process order change
with following scenarios:
Quantity change
Resource change
Rescheduling
Control key change
RM Change
Recipe change
TECO
REVOKE
Material shortage check
Best Regards,
Sheetal.

Hi,
BAPI_PROCORD_CREATE for process order create
BAPI_PROCORD_CHANGE - Change Process Order
BAPI_PROCORD_CLOSE - Close Process Order
BAPI_PROCORDCONF_CANCEL for Cancel Process Order
Confirmation.
BAPI_PROCORD_COMPLETE_TECH - Complete Technically
BAPI_PROCORD_RELEASE - Release Process order
BAPI_PROCORD_SET_DELETION_FLAG - Deletion Flag
BAPI_PROCORD_REVOKEUSERSTATUS - Cancel User Status
BAPI_PROCORD_SCHEDULE - Carry Out Scheduling
pls refer below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200dd1cc-589e-2910-98a9-bb2c48b78dfa
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Regards,
Sankaran

Bapi for F-63 changing parked document

hi all!
I need bapi or fm for changing parked document for f-63 transaction.if any one knows just send me,
Thanks in advance

Hi Raj,
This is the Bapi for parking for that transaction check wether it is useful to you
'BAPI_INCOMINGINVOICE_PARK'.
Also check this link for more number of bapis
http://www.sapbapi.com/bapi-list/ It is really very helpful
Regards,
Sana.

Report for Support Message, Change Request and Change in one overview?

Is there a report that shows the relation between the support message, change request and the change in one overview? I am already aware of the Change Management Reporting via SOLAR_EVAL, but this does not show the whole document flow in one overview.
The incident message processors want to have a quick overview of the status of the changes that are created on the basis of the support message.
If there is no report, could you point me in the right direction... Do I have to create a query or are you using BW for service desk/charm reporting?

Hi
chk te sap note
[Note 1466131 - ChaRM Reporting: Performance of data update|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1466131]
jansi

BAPI for modify "engineering change request" - Trx CC32

Similar Messages

Maybe you are looking for