BAPI gives warning message but FB50gives error message and doesnot allow to

Hi All ,
I ma using the BAPI : BAPI_ACC_DOCUMENT_POST gor JE posting . Its working fine . Now while I am posting a document through FB50 ,using balance sheet account .I am assigning a WBS element to the line item , so its giving me an information first 'Do not assign any objects in cost accounting to account 23410000' and then an error messgage 'An entry in field Project is not permitted for account 23410000'
and I am not able to post doc. .But when I trying to do the same posting using the BAPI its giving me waring message and I am able to post the document .Can any one help me why I am able to post the doc through BAPI and why I ma not getting the error message through the BAPI

Hi,
Message No. 06152
Material Master > Purchasing > Enviorment Data > Define Attributes of System Messages , here I added one entry which I found by executing transaction code (Message Maintenance) SE91.
I was searching in forum... Jurgen has replied to same query....he suggesting SAP Note (521174), what you suggest?
-Saleel Kulkarni

Similar Messages

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

Hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

The developer would know, at least they should help troubleshooting.

S4 mini camera stopped working gives warning message "camera failed".

S4 mini keeps giving me a warning message "camera failed". I have rebooted several times and it still won't work anyway to fix this?

shilo1109
Sorry to hear about the unexpected error with your camera! Let's work on getting this resolved for you today. Have you been able to clear the cache on your camera app? You can do this by going to Menu>Settings>Applications Manager>All tab>Camera. Then, tap Force Stop, Clear Data, and reboot your phone.
RuthW_VZW
Follow us on twitter @VZWSupport

If a purchase requisition already exists for an item then system should give warning message

Hi Experts,
Is there any standard configuration for showing the user a warning message if while creating a purchase requisition for an item for which one purchase requisition already exits ??
kindly help,
Regards,
Vishal

Hi Vishal,
You can configure the message in SPRO as described below
In SPRO->MM->Purchasing->Define Attributes of Sys. messages
Click on the New entries, you can get from F4 the below messages
You can select from the selection screen.
Thanks and Regards,
Sravan

Windows Fabric Warning messages and node failure

Hi ,
We have a service bus farm with 3 servers and sql installed in separate alwaysOn Instance.
we are seeing some warning messages in Event Viewer:
failed to send message Activate to node d917cb318cf36c4ce0867df57f2b57:130630848896673695 with error MessageHandlerDoesNotExistFault
GetActivationContextAsyncOperation called for invalid HostType NonActivated
Failed to update down node d917cb318cf36c4ce0867df57f2b57:130630848896673695: NoWriteQuorum
6db0d54b0361b018fa1f1e939ae98:130661086276070299 failed to process ChangeNotificationMessage full:100000004 d198518aa4afbdced0ae254d6e0866:130630848890604274 d917cb318cf36c4ce0867df57f2b57:130630848896673695.
Few more.
Same time, we have seen that our wcf services wriiten to read/Write into queues of services bus throwing exception for Service Bus connection and it appears for small time. It is random in nature.
Can someone help with reason for these warning and how to fix these.
Regards,
Kunal

Here is the error that I get from services side:
2015-01-19 03:39:53 - FATAL - OrderImportWorker - CurrentDomainOnUnhandledException - Unable to connect to Service Bus using HTTP connectivity mode.
Microsoft.ServiceBus.Messaging.MessagingCommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException:
Unable to connect to factory endpoint. -- Response:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
at Microsoft.ServiceBus.WebStream.Connect()
at Microsoft.ServiceBus.WebStream.Open()
--- End of inner exception stack trace ---
Regards,
Kunal

I set up family sharing wrong, so i left family sharing and joined the right way agin but an error occurred and now it tells me I'll have to wait 364 days to rejoin again! How can I reset my account so I can use it again?

WWhen I set up family sharing i did it with me as family organizer, but as my spouse is the organizer I had to leave the "family" I created and join his. But while setting it up an error occurred, and the screen went blank. Now I tried to join his family sharing again, and my phone keeps telling me I can't because accounts can only join families twice a year.
I Don't really want to wait 364 days from now, is there a way in which I can reset my accoint so I can join family sharing again?
Apple support doesn't have a solution for me yet!
KInd regards

This morning I looked at my family sharing account again an IT WORKS NOW! Think Apple has done a reset to my account, though I'm not exactly sure why! So I hope it works for you guys as well!

Port gnu debugge rwhich gives warning messages

Hi all,
I have ported gnu debugger
port install gdb
when I try to use the program I get a lot of warning about missing libraries
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_langgcc44/work/build/i386-apple-darwin9/libstdc++-v3/src/.libs/atomic.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/atomic.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc44/work/ build/i386-apple-darwin9/libstdc++-v3/src/.libs/bitmapallocator.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/bitmap_allocator.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc44/work/ build/i386-apple-darwin9/libstdc++-v3/src/.libs/poolallocator.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/pool_allocator.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc44/work/ build/i386-apple-darwin9/libstdc++-v3/src/.libs/mtallocator.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/mt_allocator.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_langgcc44/work/build/i386-apple-darwin9/libstdc++-v3/src/.libs/codecvt.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/codecvt.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_langgcc44/work/build/i386-apple-darwin9/libstdc++-v3/src/.libs/compatibility.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/compatibility.cc".
warning: Could not find object file "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc44/work/ build/i386-apple-darwin9/libstdc++-v3/src/.libs/complexio.o" - no debug information available for "../../../../gcc-4.4.4/libstdc++-v3/src/complex_io.cc".
which continues. My version of gcc is
gcc -v
gcc version 4.4.4 (GCC)
the main problem of course is that it fails to debug properly in some cases so I need to fix this
Thanks in advance

pjg, another possibility is that one of the other dependencies of gcc44 has somehow been compiled as if it were on 10.6, which might be influencing how gcc44 tries to compile. The *port rdeps gcc44* command (recursive dependencies) shows gmp, mpfr, and libiconv; and libiconv depends upon gperf. Additionally, *port rdeps gdb* shows gettext, which depends upon libiconv, ncurses, and expat; and ncurses depends upon ncursesw. Thus, try uninstalling gdb if you haven’t already, then gcc44 again, then gettext, then libiconv, then gperf, then ncurses, then ncursesw, then expat, then mpfr, then gmp; after these uninstalls, try reïnstalling them, without the +universal variant, in reverse order: first gmp, then mpfr, then expat, then ncursesw, then ncurses, then gperf, then libiconv, then gettext, then gcc44, then atlas (if gcc44 succeeds), then gdb.
If any of them can’t be uninstalled due to other ports depending upon them, you can find out which ports those are by the command *port dependents* portname — such ports would also need to be uninstalled (and reïnstalled in reverse order to restore them).
If the gcc44 reïnstallation doesn’t succeed, then gcc43 (or gcc42) can be tried in its stead, since each of the gcc4? ports has the same set of dependencies; if another compiler is successfully installed, then atlas should be installed with the matching +gcc4? variant.

TS3231 Help!! I can't open Aperture, I get a warning message and then it quits.

When I try to open Aperture, I get this message: "There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. " Is there a way to fix this??
Any help is really appreciated!!

Where is your Aperture Library located? On your System drive or on an external drive?
So I have tried the Troubleshooting basics, and none of them worked.
Have you tried all of them? Rebuilding the database? Removing the preferences?
If not, try those as well.
If that does not help, try id´f Aperture runs at all. Launch it with the⌥-key held down and create a new, empty library, by selecting other/new.
Try if you can work with this library and import images and edit image.
If this should succeed, check if you can import your old library into the new one by going to the File-menu and selecting "Import > Library".
Post back, if this does not succeed.
Regards
Léonie

Ios5 screwing up text messages and data allowances

Hi,
using ios5 on my old iphone 4, and when iCloud came out, I pressed "download all", set the phone down and went to sleep. Somehow in the middle of the night, the phone went off the wifi and on the data network and went on it's merry downloading way. there is not an infuriated enough smilie to show what my face looked like when I woke up the next morning to a ''hey. you are 358 MB over your monthly data allowance!'' on the 13th of the month when my phone plan starts on the 5th of the month...
a) is there any way for the stores/icloud make you confirm you wanna keep downloading if you somehow get off a wifi network, so that BS like this doesn't happen again? I know you can't download anything over 20mb over the data network, but as very few song if any are over 20mb, then apparently no alarm went off and it kept downloading thru the effing night. There has got to be a way for this not to happen without having to look at the phone while it's downloading anything from iCloud/stores?
and b) after that $hit happened, i turned off data so to limit the $$$ on my next bill, but now I`''learned'' on facebook that apparently, with ios5, text messages aren,t really text messages anymore, but are iMessages and go out/in the data plan? Is there any truth to that? If it is so, then what the effing **** again? and how do I turn it back to sms so that it's deducted out of the illimited text messages part of my plan and not out of my already-way-over-used data allowance?
FWIW, I've still been using text messages since the 13th and it's working fine, even tho I have the data turned off, but now I'm really freaked out about opening my next invoice
Help TIA

To make sure you only use wifi for data, you can turn off the 3G data like you did. I can't explain why it would switch to your 3G data from wifi during the night. It could have been due to the network or the phone. The new iMessage is only between ios5 devices, so sending a text to another ios5 device will use data, but to other phones it will just send a regular sms text. You can turn iMessage off in the settings to make sure no data is ever used when texting. This is what I did since I have unlimited texting, but limited data.

I just wiped my 1 year old laptop; am trying to register Abode Acrobat XI Standard, but get error. And anyone help, please?

Can anyone assist?

Hi walterlbaker,
We would love to help. Please tell us more about the error that you're receiving. If you can tell us what error you're receiving, and what operating system you're using, and any other details about the error, we will do our best to get this sorted out.
Best,
Sara

Book loads in ibook but has error pages and chapters missing even though I purchased I think What do I do to fix?

I tried deleting and redownloading. Got exactly the same thing. Has synced to all devices the same way.
An hour later, no email saying I purchased it. I did click the $9.99 button and then download. Very frustrating, as I read first chapter before realizing there was a problem.
Help greatly appreciated.

Have you reported it? This kb article should tell you how if you haven't
http://support.apple.com/kb/HT1933

Making a warning message to Error in VA01 transaction

Hi All,
I have a requirement to change warning message to error while creating order with reference to a quotation using VA01 transaction .
Message : 'Reference document was only valid until &'
Message No: 009
Message Class: V2.
Right now standard SAP gives warning message and allows to create order eventhough the quotation is invalid but instead I want the system to give hard error and stop creating the order.
I have checked transaction OVAH and OVM1 but they are of no use.
If anyone has any ideas please let me know.
Thanks in advance.
Sonali.

Hi Sonali,
1. In VOFM, Data Transfer -> Orders, copy routine 051 into new one (e.g. 901).
2. In this newly created routine add following statements along with the existing statements form 051.
IF cvbak-bnddt < sy-datum.
MESSAGE E247 WITH '051'.
ENDIF.
3. In transaction VTAA, choose target is S/O and source it Quotation. In Data Transfer routine at header level put 901.
This will stop creating S/O form Quotation which are expire.
Regards,
Mandar

Why should we turn off warning messages on queries?

Hi, as we know, we always turn off warning messages on queries by RSRT, but I don't know why.
Needs Help,Thanks all.

hi,
If you didnt surpress the messages in the RSRT,
when user execute the report, on the top of the variable screen, and top of the report out put page the system will give warning messages, and usally Users dont like to see those messages and some of the users can think that there is some problem with the query designing;
so always better to surpress the messages
Regards
ReddY A

It is possible to change any warning message type to error message type?

Dear All,
Kindly do your need full efforts to solve this problem;
For T code iw32, material avaibility checks works but it gives warning message as per error message required at this point.
It is possible to change that message 281 i.e. Order & has missing parts to an error message rather than a warning message.
Kindly provide your valueable suggestions regarding it.
Do tell about any badi or echancement spot or user exits where error message can be incooperated.
Thanks in advance.
Regards,
MAA

Dear Rohan,
Problem not facing problem due to any code, i think u r not getting wht i am saying.
Let me explain in detail.
While creating order from t code iw31, material avability checks works and it is working fine and generating a warning mess in case of out of stock case. Requirement is to transform that warning mess to error mess.
Just need to know how can i change standard warning mess to error mess so that error mess displays in place of that warning mess.
Kindly suggest its solution for it .
For any query free feel to contact.
Thanks.
Regards,
MAA

BAPI gives warning message but FB50gives error message and doesnot allow to

Similar Messages

Maybe you are looking for