BAPI_PO_GETDETAIL1 how to write program

Hi gurus ,
Please help me with the detail code to call a BAPI to dispaly PURCHSA ORDER details.
i have to use BAPI_PO_GETDETAIL1.
how to do the coding??????

Hi,
Welcome To SDN!!
Try this out...
Report ZBapi .
data: po_items type table of bapiekpo with header line.
parameters: p_ebeln type ekko-ebeln.
call function 'BAPI_PO_GETDETAIL'
exporting
purchaseorder = p_ebeln
ITEMS = 'X'
ACCOUNT_ASSIGNMENT = ' '
SCHEDULES = ' '
HISTORY = ' '
ITEM_TEXTS = ' '
HEADER_TEXTS = ' '
SERVICES = ' '
CONFIRMATIONS = ' '
SERVICE_TEXTS = ' '
EXTENSIONS = ' '
IMPORTING
PO_HEADER =
PO_ADDRESS =
tables
PO_HEADER_TEXTS =
po_items = po_items
PO_ITEM_ACCOUNT_ASSIGNMENT =
PO_ITEM_SCHEDULES =
PO_ITEM_CONFIRMATIONS =
PO_ITEM_TEXTS =
PO_ITEM_HISTORY =
PO_ITEM_HISTORY_TOTALS =
PO_ITEM_LIMITS =
PO_ITEM_CONTRACT_LIMITS =
PO_ITEM_SERVICES =
PO_ITEM_SRV_ACCASS_VALUES =
RETURN =
PO_SERVICES_TEXTS =
EXTENSIONOUT =
check sy-subrc = 0.
loop at po_items.
write:/ po_items.
endloop.
Refer
http://abap.wikiprog.com/wiki/BAPI_PO_GETDETAIL1
Regards
Kiran SURE

Similar Messages

How to write program for handling script ?

In script i have 2 pages.
In first page i have constant windows and variable windows.
In second page i have main window.
How to write program for this?

Hi
You need to write a driver program. You need to use open form, then write_form to write data into various windows and then close_form to close.
As you don't want main window in the first page first try out just by having the window in the second page; i guess system will take care of it. As all other windows filled and if u start writing data in the main it'll go for next page.
If doesn't work have the window on the first page with the least hight and write a command
IF &SYST-PAGE& EQ 1
    NEXT-PAGE.
ENDIF.
Then in the second page you can have the main window hight as per your requirement.
Here is an example
(1) Get customer data
TABLES: scustom, sbook, spfli.
DATA: bookings like sbook...
select * from...
(2) Open form
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      DEVICE = 'PRINTER'
      FORM = 'S_EXAMPLE_1'
      DIALOG = 'X'
    EXCEPTIONS
      others = 1
(3) Print table heading
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT = 'HEADING'
      TYPE = 'TOP'
      WINDOW = 'MAIN'
      FUNCTION = 'SET'
(4) Print customer bookings
LOOP AT bookings WHERE
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'BOOKING'
        TYPE = 'BODY'
        WINDOW = 'MAIN'
ENDLOOP
(5) Close form
CALL FUNCTION 'CLOSE_FORM'
Regards
Surya.

How to write program to list the system directory(content of pc)

how to write a program that will display all the folder n directory of the pc like:
+My Computer
+c:
+d:

Copy this line and save it in a file named "dirlist.bat":
for %%* in (%1) do dir /b %2 %1To use it, change to the directory it's in and at the command prompt type
dirlist directory [/s] directory is the name of the directory that you want listed.
/s is optional and will list the contents of all subdirectories also.
(You didn't say it had to be Java - use the right tool for the job)

I need help on how to write program that read integers

I am a beginner to java and need you help please.
How do I write a program that will read an unspecified number of integers (between 5 to 8 values) and :
(a) determine how many positive and negative value have been read.
(b) find the average of the positive integers as well as the average for the negative integers.
(c) find the total of all values. (both positive and negative)
(d) count the number of zero input by the user and display the count.
(e) your program should allow the users to repeat the task as many times as they want.
Generate a table like this: (assuming that the user enters: 2,0,-11,21,0,-3,89,6)
Positive Ave(+) Negative Average(-) Zero(0) **************************************************************
2 39     -3      -7     2
21     -11
89
6

I'm sure thats ur programming assignment.... Read any intro to java book .... or search on the net and you will be able to find answers

How to write programs for selfdeveloped message based instruments?

I developed a message based interface by myself, but I have no experience of developing instrument drivers with Labwindow/CVI. I want to know which commands will be sent to the instruments when power up? It's very strange that when I plug in my instrument, the light of Access of resource mamager keep on lighted and the HP-VISA Assistant can't recoganize all the instruments in the mainfram. I want to know how to let my instrument be recoganized by system. Thank you very much!

What is the VXI controller for your system? What VXI driver is running on the system? You mention HP-VISA, is your VXI controller and driver from HP or Agilent? If so, you will need to contact them on how to get your instrument recognized and working in the system.
To write your instrument driver, I would recommend using VISA commands. Message based instruments have sets of specific commands that they respond to. Generally, one would have to look in the documentation for that instrument to determine the instruments commands.

How to write program for the long text in EMIGALL for the DEVICE LOCATION.

Hi,
I am pretty new to this ISU field and i have been asked to code for a Long Text in EMIGALL for DEVICE LOCATION,
so i would like someone can help me with it.
thanks in advance.
Robert.

Robert,
You can find most of the answers to your questions in the Guidelines:
Chapter 2.4.2 describes how to configure the field rule Fixed Value.
Chapter 2.4.5 describes how to configure the field rule via KSM.
Chapter 2.5 descibes the Key- and Status Management and the usage of the the KSM in field rules.
The specific answer to your questions are:
(1) ...When i was adding the fixed rule, it was asking for domain so what should be the Domain that i should add ... You may ignore the domain field when creating a fixed value object. It's more for information purposes.
(2) ... and what should i keep the fixed value, string or filed or abap rule ... I'd suggest to use 'String' and enter the specific value in the field 'FV contents'.
(3) ... Finally you need to adjust the RETURN-FIELD of the newly created BAPI migration object to AUTO-X_HEAD-TDNAME, where do i make this adjustment can you specify that ... The return field can only be adjusted int the migration object maintenance screen (MigObject -> Change). Please see chapter 3.1 for more details on the 'return field' and figure 3-8 in chapter 3.4.2 how to generate a BAPI migration object.
(4) ... Well i would also like to ask about the x_head-tdname = via KSM (e.g. DEVLOC), where should i put the value ... You wanted to know how to migrate a long text of a device location migration object DEVLOC). According to chapter Chapter 2.4.5 you need to enter the name of the superior migration object (here DEVLOC) in the 'MigObject1'field on the 'via KSM' sub-screen on the field maintenance screen.
(5) ... and what exactly would it be can i put DEVLOC in the ID of technical Object and where should i put this value... I am not sure I understand your question. In the end you will need to pass the number (ID) of the technical object in the TDNAME field. Either you put the id into the import file (only if you know the id) or you need to use the 'via KSM' field rule to replace the legacy system key of the device location by the SAP key by the load report and prior to passing the auto data to the application thus your new function module.
Kind regards,
Fritz

How to write program to make document well formed?

hi All,
I want to make the document well formed if it's not...
Like if any tag is missing in the document that should be added programmatically.And the tags are generalized not hardcoded...
Will u plz give me any idea for that....
Plz help me.
Thanks in advance

There are two problems with this, and both are close to show-stoppers.
1) What you showed is sloppy html. I'm not aware of any HTML parsers like are available for XML. If you use an XML parser, either DOM or SAX, you will stop with the first mismatched element. Once an XML parser recognizes the document is badly-formed, it stops. It might generate millions of phantom problems due to one missing element.
2) Even if you could find that in your document stub there is a <para> element missing, so what. Where do you programmatically put the opening element? You would need to know a lot about what is allowed where to find the best place for it so it does the least damage to other elements.
Dave Patterson

I want to how to write program to design for archived data?

Hi,
In my project already some z reports are there. Now some old data is archiving from the tables.
I want read the data for the z reports . i used below code to read the data by passing the archive document key to read the data.
But the below code is reading entire data due to that it is taking lot of time.
Please give some suggestions weather am i gong in right way or not?.
LOOP AT it_arcindx1 INTO wa_arcindx1.
 v_key = wa_arcindx1-archivekey+0(6).
 CALL FUNCTION 'ARCHIVE_OPEN_FOR_READ'
 EXPORTING
 archive_document = v_key
 object = 'MM_EKKO'
 IMPORTING
 archive_handle = lv_handle
 EXCEPTIONS
 OTHERS = 1.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 EXIT.
 ENDIF.
 DO.
 CALL FUNCTION 'ARCHIVE_GET_NEXT_OBJECT'
 EXPORTING
 archive_handle = lv_handle
 EXCEPTIONS
 end_of_file = 1. "nur die Ausnahmen, auf die man
 IF sy-subrc <> 0. "wirklich reagieren will
 EXIT.
 ENDIF.
 CALL FUNCTION 'ARCHIVE_GET_TABLE'
 EXPORTING
 archive_handle = lv_handle
 record_structure = 'EKBE'
 all_records_of_object = 'X'
 TABLES
 table = git_ekbe_temp
 EXCEPTIONS
 end_of_object = 0.
 LOOP AT git_ekbe_temp ASSIGNING <ls_ekbe>
 WHERE mandt = sy-mandt
 AND vgabe = '8'
 AND budat IN s_budat.
 MOVE-CORRESPONDING <ls_ekbe> TO waa_table1.
 APPEND waa_table1 TO it_table1.
 ENDLOOP.
 ENDDO.
 CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
 EXPORTING
 archive_handle = lv_handle.
 CLEAR wa_arcindx1.
ENDLOOP.
Regards,
Maruthi S

Hi Maruthi,
Try using 'ARCHIVE_GET_NEXT_RECORD' instead of 'ARCHIVE_GET_TABLE' using which you can maintain no. of records hit by the handle.
Have a look at sample logic given in SCN.
http://scn.sap.com/thread/1263660
Hope this helps.
Regards,
Naveen

How to write driver programming in smartforms

hi Floks
how to write driver programmig and how many types of driver programs available to trigger smartforms what are they . how to call the url in smartforms ?
help me out .thanking you ,
with regards,
suresh

Hi
Try to get the Function module name from the smart form
how to find Driver program for a smartform
and now goto SE38 and create a progarm for calling the smartform
smartform driver program
Regards
Kathirve

Really need help on how to write this program some 1 plz help me out here.

i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
     public static void main(String[] args)
          double length, width, glass_cost, perimeter, frame_cost, area, total;
          Scanner keyboard = new Scanner (System.in);
          System.out.println("Enter the length of the window in inches");
          length = keyboard.nextInt();
          System.out.println("Enter the width of the window in inches");
          width = keyboard.nextInt();
          area = length * width;
          glass_cost = area * .5;
          perimeter = 2 * (length + width);
          frame_cost = perimeter * .75;
          total = glass_cost + frame_cost;
               System.out.println("The Length of the window is " + length + "inches");
               System.out.println("The Width of the window is " + length + "inches");
               System.out.println("The total cost of the window is $ " + total);
     Enter the length of the window in inches
     5
     Enter the width of the window in inches
     8
     The Length of the window is 5.0inches
     The Width of the window is 5.0inches
     The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AM

Adhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
%

How to write select statement in XSL-FO type XML program

Hi All,
Could you please anyone explain briefly how to write select statement in XSL-FO XML Program.
Requirement:
In the seeded program, OAF page is creating one XML file and through XSL-FO type XML Pulisher loading data and generating PDF output. as per the requirement some of the informations are missing in the XML file and for modifing the OAF page will be taking someting. we are planing to write a select query inside the XSL-FO program to get the required information.
Could you please help me how to write a select statement inside the XSL-FO type programs.
Please give me some example program for this...
Thanks in Advance.
Regards,
Senthil

Hi ,
Please check the below code and modified plant as select-option
Check the below code :
tables : mara,
mast.
data : begin of i_data occurs 0,
matnr like mara-matnr,
end of i_data.
select-options : s_matnr for mara-matnr,
S_werks for mast-werks.
start-of-selection.
select a~matnr into table i_data
from mara as a inner join mast as b on amatnr = bmatnr
where b~werks in s_werks
and a~matnr in s_matnr
and a~mtart = 'AA'
or a~mtart = 'UT'
and b~stlan = '1'.
loop at i_data.
write:/ i_data-matnr.
endloop.
Hope you got it.
Thanks
Seshu

HOW TO WRITE ABAP PROGRAMMING IN JAVA BY USING NETWEAVER

HI,
i am working with bapi(mean is calling bapis in my java programs).
please tell me the how to write abap programs in nwds
Thanqqqqqqqqq
Guru

Hi,
Refer the following links..
http://manuals.sybase.com/onlinebooks/group-iaw/iag0203e/iadgen2/@Generic__BookTextView/24685
and this blog
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Regards,
Uma

How to Write C Program in Eclipse

Hi,
I write a Java Program in MyEclipse 5.0.in that i wrote System.load("");to load a dll file of C program.But i dont no How to write a C program in Eclipse 5.0 verson.Can any one Pleace Help me to Write a C program in Eclipse 5.0.

RaghuChowdary_kolikineni wrote:
I have MyEclipse 5.0 version on my System.i want to write a java Program.in that i want to access the C functionality Using System.load("");so i write another program for C.So i want to write both Java and C programs are Same Eclipse version.how to write and which version is supported for that purpose.pleace spcify the steps to write the programs in that version u will toldTry asking in an Eclipse forum or in a MyEclipse forum.

How to write CRM Program.........

Dear Frnds,
I am familiar with ABAP but now i want to go with CRM but i have no idea about how to write simple program.
Is it with scripting and abap code for run simple program..
which are the transaction code to write program and execute. pls make me familiar with it.
Regards,

CRM code is written in same way as ABAP code but tables are different as compared to R/3.
here oops concept is used in crm-pcui.
crm middleware is used to connect diff systems like crm and r/3.
so go thru the transaction crmd_order.
regards
dheeraj

How to write print program for smartforms

Hi all
I need to develop new smartform and its print program.
But Im not experience in writing print program for smartform.
Ive gone through the simple print program sample that use only one table as input and one table for output.
But my smartforms require few tables for input and output.
How should I define the Data?
Can anyone guide me on how to write it.
Thanks & Regards
az

Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Reward points...

BAPI_PO_GETDETAIL1 how to write program

Similar Messages

Maybe you are looking for