BAPI_POSRVAPS_SAVEMULTI3 error Object is Locked at present
HI,
Im using the BAPI BAPI_POSRVAPS_SAVEMULTI3.
If i give more no.of records(Purchase Requesitions) for Requirements & Reciepts its not updating any values and throwing an error : Object is Locked at present.
So, i have segregated the orders depending on Recieving Location and used the BAPI:BAPI_POSRVAPS_SAVEMULTI3.
Its Updating for some locations, but again throwing same error.
Is der any constraint ? Im not having any clue about it....
If i execute the same for single location its working fine...
Please suggest me..
Thanks in advance....
Regards,
Dayakar
Hi Manish,
Actually,these locks are not because of any other User login..its because...
For Example:
I have locations : loc1 loc2 loc3 loc4....
so im looping on locations..and executing the BAPI...its executing fine for some locations for example loc1,loc2 and giving error(no further execution) for other..when i checked with BASIS people..there its showing an error Locktable Oveflow in the livecache...
So i have gone though the problem description its saying Lock table overflow...so i told them to chage the table size...they indcreased it and now its working fine...Proble got solved..
Thanku for ur response....
Regards,
dayakar
Edited by: Dayakar Chirivella on Sep 19, 2008 9:46 AM
Similar Messages
-
Many PCs fail -- object is locked by user BWremote
Hi friends,
Today many of Process chains failed at process load IP with the following error:object is locked by user BWremote. repeat is done and chains are okie now .. i want to knw wht this error occurs and possible precautions not to occur these error again..
plz guide me .
PavanHi,
If you are trying to load the data into the ODS or the master data objects then it is possible that you are simulataneoulsy two loads in the same target and it is only possible in the case of the cubes and not with master data and the ODS data as it you cannot load one request if one activation is going on.
Also it could be becasue you will be trying to load the data at the same time of the attribute change run is running.
When an attribute change run is happening you will not be able to laod the data in targets.
This could be the reasons.
Thanks
Thanks -
Objects are locked in open change requests during support packs update
Hi All,
We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..? after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
Please suggest me whether i can find the specific objects to unlock or any other process.
Thanks & Regards,
Sreekanthsreekanth jd wrote:
Still the same error Objects are locked in open change requests is coming.
>
Hello,
Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
Thanks -
** SMQ2 - Object is locked by PIAFUSER - Message Has Errors
Hi Friends,
In SXMB_MONI, for a particular message, in the Queue column, we have 'red color' time bomb symbols. It shows 'Message Has Error'. When we double click the queue. we can see an error message 'Object is locked by PIAFUSER'. So, how to solve this problem and restart the message ?
Kindly help friends.
Kind Regards,
Jeg P.Hi
1) clear the queues in SMQ2,first try to activate them,if that doesn't work them delete them
2)You may need to re-register your queues.
Follow SXMB_ADM -> Manage Queues -> Deregister Queues
Afterwards, re-register the queues and activate from the same screen
3)Only use SMQ1 (outbound queues) and SMQ2 (inbound queues) if re-registering doesn't fix it. You will need to give the queues sometime to get activated so be patient.
4)From SXMB_MONI go to Queue ID of the message, a click here shall take you to qRFC monitor.
if the messages are stuck, you should see an entry indicating number of messages stuck in the queue.
a double click on the entry shall take you to detailed list.
if the messages are stuck because of any error (other than queue not registered etc for e.g. a message failure) then the first message shall show you that.
if indeed you find a message stuck in the queue then the way is to delete the stuck message (DONT DO THIS IN PRODUCTION SERVER without being sure of what does this mean for that particular process !!) and unlock the queue from previous screen.
5)Go to smq2 and execute F8. Then it should come as Nothing was Selected.
If any queues are present then open a queue.if the status is SYS ERROR check the entries,right click on the status text and give save LUW.This brings queue to READY. .
GoTo-> Qin Scheduler: check for the scheduler status to be inactive->Edit-> Activate Scheduler: status frm inactive to starting to wait.Now the queue will be RUNNING.U can see the entries in the queue moving.
Now go to SMQ3, right click on the queue and give Restore LUW.
6)this basically means tht message is waiting in the queue.
in sxmb_moni go to queue Id column and double click on the entry .It will take u to SMQ2.Check the status of the queue
If its SYSFAIL or STOP then double click on it and try to correct the error.After correcting the error send the message again.Also check whether the Queeu is Registred in transaction SMQR.
7)Select your queue form the sxmb_moni, you will reacht he QRFC monitor.
Here you will see some lock figures on the , Select on the 'Unlock Queues'. Activate your queues once again.
This is if your data is correct and queue is stuck. You should only delete the queue if it has errored out due to incorrect data and you need to urgenetly process the rest of the data in the queue.
If you drill down one step more than selct the error message and on the menu select edit-->Save LUW.
thanq
krishna -
I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng -
Error "Problem occured locking WS object" while activating Proxy
Hi All,
I have move an Inbout proxy to a different Client(QA system) and in QA system that proxy shows incative.
When i tried to activate that proxy/service in Sproxy, getting error "Problem occured locking WS object".
Proxy was active in development system and was working fine without any error.
Please provide some help, what need to be done to fix this issue
Thanks
HarshitHi Harshit,
Try with the following steps in sequence:
1. Re-genarate the proxy in Development - Create a New Transport Reuest.
2. Transport the Proxy from PI Dev to PI OA
3. Confirm the Proxy in PI QA and then, transport the re-generated Request from ECC Dev to ECC QA.
Regards,
Pranav. -
Error: Object ACCOUNTCC in Appset (app) is locked
BPC Experts,
We've added a new hierarchy node in Accounts dimension and while processing the dimension updates we're getting the below error:
Object ACCOUNTCC in Appset (Littelfuse) is Locked.
I didn't get this error before and in our QA box it works without any issues.
Any clues on where and what to look are greatly appreciated.
Thanks
MujeebHi,
How did u resolve this issue?
Please advise,
Thanks,
Themba -
Budget Exceeded Error- object locked
Hi,
When we are trying to crate PO, getting this error: Budget Exceeded. We have tried the following :
1. Ran the report RKANBU01 for the project.
2. CJEN (refresh Project database)
3. CJBN (Reconstruct availability control for project) - it is giving us message that "object was locked" instead of message "Availability control activated"
Could anyone please let us know what is resolution at this point, how this object can be unlocked.
Thanks,
Saurav
Edited by: Saurav Kotriwala on Jul 30, 2009 9:42 AM
Edited by: Saurav Kotriwala on Jul 30, 2009 9:45 AMHi,
Go to transaction code Ko22 and increase the budget, then you system will allow to end proceed.
object is nothing for your project which you are using, if some other user is using the project at the same time when you are processing then it will be locked, to unlock the object, check the user who is using the same project code ask him to exist from that or go to sm12 and unlock the user ids.
Regards,
Padma -
Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?No one else had this?
-
Batch Processing error: Object variable or With block variable not set - 91
We are experiencing the following error when trying to execute the FDM Batch Processing of files in our UAT environment. This error is not occuring in our DEV environment. I have seen this error before when the data file had been left open and FDM could not access the file, so it appears this error is usually due to file permissions. However, this time none of the files are open, and as far as we can see, FDM should have full access to the OpenBatch and Inbox folders etc.
Does anyone please have any suggestions, particularly on what account FDM will carry out the various tasks? Would it use a system account?
Error:
"Object variable or With block variable not set - 91"
FDM Log:
** Begin FDM Runtime Error Log Entry [2012-07-06 16:07:09] **
ERROR:
Code............................................. 75
Description...................................... Path/File access error
Procedure........................................ clsBatchLoad.fFileCollectionCreate
Component........................................ upsWBatchLoaderDM
Version.......................................... 1112
Thread........................................... 5828
IDENTIFICATION:
User............................................. admin
Computer Name.................................... *******
App Name......................................... *******
Client App....................................... WorkBench
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... *******
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... *******
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... *******
Category ID...................................... 14
Period........................................... *******
Period ID........................................ 02/07/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... FalseI can confirm that there is definitely data present in our data files in this case.
Please note that this error only occurs when using the Batch Processing functionality of FDM Workbench (which requires files to be placed in the OpenBatch subfolder of the Inbox). I can load individual files fine when using the FDM Web Client.
As part of the first step of the batch load process, FDM Workbench moves files from the OpenBatch folder to a new folder which it creates in the Inbox\Batches directory. However, it is not even managing to do this, and gives the error below.
We have tried to share the OpenBatch folder, to allow specific users access to drop files into this folder. Consequently, I believe suggests a security problem on the OpenBatch folder itself (please see original post). I have been told privileges should be sufficient for FDM to make use of this folder too, however I suspect this is not the case at present.
In the meantime, please let me know if this could be due to other causes. -
The requested object is locked by another transaction
Hi All,
I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
'The requested object is locked by another transaction'
Message no. MC602
Diagnosis
A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
Technical Information: The C_ENQUEUE routine returns the following values:
COLLISION_OBJECT = ERSMONFACT
COLLISION_UNAME = SINGH
System response
The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
Procedure
Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
I tried SM12 but there is no lock entry, can u suggest some thing?
Regards,Hello,
here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
Here two things to look :
1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
2.GO to SM12 try to search the object there and remove the lock.
Thanks,
Deepak -
Opatch error: Unable to lock Central Inventory
A) When applying Oracle one-off patches I get this error:
Unable to lock Central Inventory. Stop trying per user-request?
OPatchSession cannot load inventory for the given Oracle Home /oracle/VRQ/102_64. Possible causes are:
No read or write permission to ORACLE_HOME/.patch_storage
Central Inventory is locked by another OUI instance
No read permission to Central Inventory
The lock file exists in ORACLE_HOME/.patch_storage
The Oracle Home does not exist in Central Inventory
B) Researching the error, I find thes solutions...
This error may occur because of any one or more of the following reasons:
1. The ORACLE_HOME/.patch_storage may not have read/write permissions. Ensure that you give read/write permissions to this folder and apply the patch again.
2. There may be another Oracle Universal Installer instance running. Stop it and try applying the patch again.
3. The Central Inventory may not have read permission. Ensure that you give read permission to the Central Inventory and apply the patch again.
4. The ORACLE_HOME/.patch_storage directory might be locked. If this directory is locked, you will find a file named patch_locked inside this directory. This may be due to a previously failed installation of a patch. To remove the lock, restore the Oracle home and remove the patch_locked file from the ORACLE_HOME/.patch_storage directory. For more information on restoring the Oracle home, refer to section "Restoring Oracle Homes".
5. The Oracle home may not be present in the Central Inventory. This may be due to a corrupted or lost inventory or the inventory may not be registered in the Central Inventory. For more information, refer to section "Diagnosing and Recovering from Central Inventory Corruption".
C) Everyhing looks okay. What am I missing?
Oracle - 10.2.0.4
OS - AIX 6.1
Multiple database on the server: IPQ and VRQ
Thanks in advance.Hi,
did you setup a seperate oraInventory for each of both instances as recommended?
Check the contents of oraInst.loc
(On Solaris in /var/opt/oracle, not sure if the same on AIX)
It should point to the Inventory Location.
May be yours is pointing to the other ORACLE_HOME-Inventory.
I tend to use the Inventory location
/oracle/SID/oraInventory, so each ORACLE_HOME has its
own non-mixed inventory.
But you have to keep in mind that oraInst.loc needs to be adjusted,
when you use runInstaller or OPatch !
Or is one ORACLE_HOME a binary copy of another?
A bianary copied ORACLE_HOME is non patchable at all, as far as I know.
In this case (beside this is not a supported SAP configuration), you need to
apply the patches to your copy-Source and do a re-copy.
There is a meatlink note describing how to use a cloned ORACLE_HOME,
but again: This is not supported within SAP!
Hope this helps
Volker -
I have installed Project Server 2013 on SharePoint 2013, and installed the first PWA which worked. But I needed to change some configurations and so I deleted the PWA instances, but now I cannot delete the Project Server Service Application. Every attempt
to delete the Service Application it gives the error above, namely:
Sorry, something went wrong
Object reference not set to an instance of an object.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: ecaeaf9c-9fec-3049-ba23-d9a18337b9e2
Date and Time: 8/18/2014 12:55:31 PM
I'd urgently appreciate help.Thanks Paul for the reply. Here's the error, and the logs below covering the time the error occurred.
I've tried to extract a section of the log file below:
==========================================================
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:19.07* w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
af4yd High [Forced due to logging gap, cached @ 08/18/2014 19:20:18.99, Original Level: Verbose] TenantAppEtag
record requested but there is no sitesubscription or tenantId for site {0} so we will use the WebApp Id for the cache. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Asp Runtime
aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.10 w3wp.exe (0x7240)
0x7370 Project Server Unified Logging Service
b8fx High ULS Init Completed (w3wp.exe, Microsoft.Office.Project.Server.Native.dll) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 0x6FB7007
6t8h High [Forced due to logging gap, cached @ 08/18/2014 19:20:19.07, Original
Level: Verbose] {0} f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
9or8 High [Forced due to logging gap, Original Level: Verbose] Unprovisioning service app {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.16 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
8ig5 High Unregistering project psi shared application timer job. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium Application error when access /_admin/ServiceApplicationDelete.aspx,
Error=Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob() at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication
psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData) at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender,
EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyn... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium ...cPoint, Boolean includeStagesAfterAsyncPoint)
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23* w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected ...t) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception
of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.Rais...
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High ...ePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. 67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32* w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.38 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Upgrade
aiaih High [Forced due to logging gap, Original Level: Verbose] desiredVersion: {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.41 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
aat87 Monitorable f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.46 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1)).
Execution Time=550.415729455012 f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:20.08* w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No acba9844-723f-4477-901c-adfdcae98e4e
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Logging Correlation Data xmnv
Medium Name=Timer Job SchedulingUnpublish f1c4af9c-ffd4-3049-ba23-d4fe1cc1d1d7
08/18/2014 19:20:20.31 OWSTIMER.EXE (0x09C4)
0x0A10 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No 5dbf5387-ba14-4980-bc61-5ba5490870fa
==============================================
Thanks for the attention. -
Problem in HRMD_A Idocs: Object is Locked
Hi Everyone,
I would like to ask for assistance on the problem below.
We've encountered almost everyday failed HRMD_A idocs. Almost all of the idocs have the same error message: "Object is Locked. A locked key has been set for the object."
The object type is "P".
Can you help us on how to solve this problem?
Thanks in advance!Hi,
For the locked object the sender system itself will not send the idoc.
and hence the error for the lock object might have been seen in the sender system and not the receiver system.
Yes you can process the idocs which are in error in the receiver system by frequently scheduling reports like
RBDMANI2-Schedule update of idocs with errors and
RBDAPP01- for ready for transfer idocs
I suggest you use the bapi way of transferring data, where the receiving system reads data from the sender system once a day and reads only that data which is changed during that date.
Regards,
Divya -
Refrencing objects that are not present on frame 1 of a movieclip
Hi everyone!
I'm working with a movieclip right now that has two frames in it. I want the user to be able to go back and forth between the pages by clicking on tabs on either page. The button that they click on is only present on the frame that it is applicable (so, the button to switch to frame 2 is only present on frame 1, and vice versa).
I want to control when they are able to click back and forth, and be able to turn the buttons on and off whenever I need to, but since the button to switch back to frame 1 is only on frame 2, when I reference it from the main timeline, the button registers as a null object. How do I refrence an object that is not present on the first frame of a clip?
Here's the gist of what I have. The main timeline has an object called "mAccess" that has 2 frames, Windows and Reports. At the top there are two tabs, one for Windows, one for Reports. The Windows tab is only clickable when on the Reports frame (frame 2) and the Reports tab is only clickable when on the Windows frame (frame 1)
Main Timeline:
mAccess.bReports.addEventListener(MouseEvent.CLICK, gotoreportstab);
function gotoreportstab(event:MouseEvent) {
mAccess.gotoAndStop(2);
mAccess.bWindows.addEventListener(MouseEvent.CLICK, gotowindowstab); <--- This gives me the error about the null object reference,
function gotowindowstab(event:MouseEvent) { since bWindows does not exist on frame 1 of mAccess.
mAccess.gotoAndStop(1);
Thanks for whatever help you can give me!the bottomline is you can't reference an object that doesn't exist (yet). the easiest work-around is to make sure your object exists on the frames where you need to reference it. the object doesn't need to be visible so this isn't much extra-work. you can add and remove the object from the displaylist as you see fit or enable and disable its visible property.
Maybe you are looking for
-
how do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?
-
What incompatability issues exist with Photoshop Elements 4.0 and windows 7?
I have been notifiied about an incombatability issue with windows 7 and Photoshop Elements 4.0. What do I lose if I use it? Because there are no help suggestions on the Adobe site does any one have any information?
-
Im from canada and going to spain will a spaniard sim work on a canadian iphone?
im from canada and going to spain will a spaniard sim work on a canadian iphone?
-
Mtdchar.ko missing 3.18.6-1
Hi Everyone, Kernel module mtdchar.ko is not present in 3.18.6-1. Is this known, intentional, unintentional? I'm new to Arch Linux; how would/should I go about obtaining mtdchar.ko? My kernel information is: Linux dkarchlinux64 3.18.6-1-ARCH #1 SMP
-
I had facetime and I have mountain lion. However, after an update facetime disappeared. Doesn't it come with mountain lion? What do I need to do to find facetime? Do I need to repurchase it?