BAPI/RFC which is importing the Values from R/3 environment to Portal

Hi Gurus,
The BADI ILM_BADI_ENHANCEMENTS is used in Webportal which is providing the Customization Values to (through POWL* webdynpro components)
the default Values provided in the Implementation have been replaced with an implicit Enhacement
The Value of workcenter which is MECHANIK has been replaced with another value through Implicit Enhancement which is working fine within R/3 environment(i checked in Debuggin )but still the error from Portal is shown as follows
Work center MECHANIK is not defined in plant 0001*
where from this message has been issued, through any RFC or BAPI
Please help me
Thanks in Advance
Note --Moderators: Please donot treat this as Duplicate thread since ABAP general is most watched and I mistakenly
created the thread in UI section Hope you understand
Cheerz
Ramchander Rao.K

Hi Gurus,
The portal is using POWL* Webdynpro components and in R/3 the BAdi has been implemented along with the an implicit Enhancement but the Values are not reflected in Portal
Please guide me and/or on which web dynpro component this is getting displayed
The MECHANIK values has been replaced by another Work Centre in R/3 Environment but still this visible in Portal
Please guide me
Cheerz
Ramchander Rao.K

Similar Messages

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

NullPointerException - Cannot get the value from variable f_cashGiven

In SubCheckout.java (a POS), what I want is when Payment button (f_cashPayment) is pressed, the action "Cash" is performed, get the value from Cash Given (f_cashGiven), do the subtraction and post the value as Cash Return (f_cashReturn). The code is filled in actionPerformed. But I cannot get the value by using f_cashGiven.getValue() from VNumber class. It returns NULL. This should be quite straight forward, but I do not know what is wrong. Please help!
Enclosed please find the source code of SubCheckout.java and VNumber.java
This is the code of SubCheckout.java :
* The contents of this file are subject to the   Compiere License Version 1.1
* ("License"); You may not use this file except in compliance with the License
* You may obtain a copy of the License at http://www.compiere.org/license.html
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
* the specific language governing rights and limitations under the License.
* The Original Code is Compiere ERP & CRM Smart Business Solution. The Initial
* Developer of the Original Code is Jorg Janke. Portions created by Jorg Janke
* are Copyright (C) 1999-2005 Jorg Janke.
* All parts are Copyright (C) 1999-2005 ComPiere, Inc. All Rights Reserved.
* Contributor(s): ______________________________________.
package org.compiere.pos;
import java.awt.*;
import java.awt.event.*;
import java.math.BigDecimal;
import javax.swing.border.*;
import org.compiere.grid.ed.*;
import org.compiere.swing.*;
import org.compiere.util.*;
*     POS Checkout Sub Panel
* @author Jorg Janke
* @version $Id: SubCheckout.java,v 1.3 2005/03/11 20:28:22 jjanke Exp $
public class SubCheckout extends PosSubPanel implements ActionListener
      *      Constructor
      *     @param posPanel POS Panel
     public SubCheckout (PosPanel posPanel)
          super (posPanel);
     }     //     PosSubCheckout
     private CButton f_register = null;
     private CButton f_summary = null;
     private CButton f_process = null;
     private CButton f_print = null;
     private CLabel f_lcreditCardNumber = null;
     private CTextField f_creditCardNumber = null;
     private CLabel f_lcreditCardExp = null;
     private CTextField f_creditCardExp = null;
     private CLabel f_lcreditCardVV = null;
     private CTextField f_creditCardVV = null;
     private CButton f_cashPayment = null;
     private CLabel f_lcashGiven = null;
     private VNumber f_cashGiven = null;
     private CLabel f_lcashReturn = null;
     private VNumber f_cashReturn = null;
     private CButton f_creditPayment = null;
     /**     Logger               */
     private static CLogger log = CLogger.getCLogger(SubCheckout.class);
      *      Initialize
     public void init()
          //     Title
          TitledBorder border = new TitledBorder(Msg.getMsg(Env.getCtx(), "Checkout"));
          setBorder(border);
          //     Content
          setLayout(new GridBagLayout());
          GridBagConstraints gbc = new GridBagConstraints();
          gbc.insets = INSETS2;
          //     --     0
          gbc.gridx = 0;
          f_register = createButtonAction("Register", null);
          gbc.gridy = 0;
          add (f_register, gbc);
          f_summary = createButtonAction("Summary", null);
          gbc.gridy = 1;
          add (f_summary, gbc);
          f_process = createButtonAction("Process", null);
          gbc.gridy = 2;
          add (f_process, gbc);
          f_print = createButtonAction("Print", null);
          gbc.gridy = 3;
          add (f_print, gbc);
          //     --     1 -- Cash
          gbc.gridx = 1;
          gbc.gridheight = 2;
          gbc.fill = GridBagConstraints.BOTH;
          gbc.weightx = .1;
          CPanel cash = new CPanel(new GridBagLayout());
          cash.setBorder(new TitledBorder(Msg.getMsg(Env.getCtx(), "Cash")));
          gbc.gridy = 0;
          add (cash, gbc);
          GridBagConstraints gbc0 = new GridBagConstraints();
          gbc0.insets = INSETS2;
          gbc0.anchor = GridBagConstraints.WEST;
          f_lcashGiven = new CLabel(Msg.getMsg(Env.getCtx(),"CashGiven"));
          cash.add (f_lcashGiven, gbc0);
          f_cashGiven = new VNumber("CashGiven", false, false, true, DisplayType.Amount,
               Msg.translate(Env.getCtx(), "CashGiven"));
          f_cashGiven.addActionListener(this);
          f_cashGiven.setColumns(10, 25);
          cash.add (f_cashGiven, gbc0);
          f_cashGiven.setValue(Env.ZERO);
          f_lcashReturn = new CLabel(Msg.getMsg(Env.getCtx(),"CashReturn"));
          cash.add (f_lcashReturn, gbc0);
          f_cashReturn = new VNumber("CashReturn", false, true, false, DisplayType.Amount,
               "CashReturn");
          f_cashReturn.setColumns(10, 25);
          cash.add (f_cashReturn, gbc0);
          f_cashReturn.setValue(Env.ZERO);
          f_cashPayment = createButtonAction("Payment", null);
          f_cashPayment.setActionCommand("Cash");
          gbc0.anchor = GridBagConstraints.EAST;
          gbc0.weightx = 0.1;
          cash.add (f_cashPayment, gbc0);
          //     --     1 -- Creditcard
          CPanel creditcard = new CPanel(new GridBagLayout());
          creditcard.setBorder(new TitledBorder(Msg.translate(Env.getCtx(), "CreditCardType")));
          gbc.gridy = 2;
          add (creditcard, gbc);
          GridBagConstraints gbc1 = new GridBagConstraints();
          gbc1.insets = INSETS2;
          gbc1.anchor = GridBagConstraints.WEST;
          gbc1.gridx = 0;
          gbc1.gridy = 0;
          f_lcreditCardNumber = new CLabel(Msg.translate(Env.getCtx(), "CreditCardNumber"));
          creditcard.add (f_lcreditCardNumber, gbc1);
          gbc1.gridy = 1;
          f_creditCardNumber = new CTextField(18);
          creditcard.add (f_creditCardNumber, gbc1);
          gbc1.gridx = 1;
          gbc1.gridy = 0;
          f_lcreditCardExp = new CLabel(Msg.translate(Env.getCtx(),"CreditCardExp"));
          creditcard.add (f_lcreditCardExp, gbc1);
          gbc1.gridy = 1;
          f_creditCardExp = new CTextField(5);
          creditcard.add (f_creditCardExp, gbc1);
          gbc1.gridx = 2;
          gbc1.gridy = 0;
          f_lcreditCardVV = new CLabel(Msg.translate(Env.getCtx(), "CreditCardVV"));
          creditcard.add (f_lcreditCardVV, gbc1);
          gbc1.gridy = 1;
          f_creditCardVV = new CTextField(5);
          creditcard.add (f_creditCardVV, gbc1);
          gbc1.gridx = 3;
          gbc1.gridy = 0;
          gbc1.gridheight = 2;
          f_creditPayment = createButtonAction("Payment", null);
          f_creditPayment.setActionCommand("CreditCard");
          gbc1.anchor = GridBagConstraints.EAST;
          gbc1.weightx = 0.1;
          creditcard.add (f_creditPayment, gbc1);
     }     //     init
      *      Get Panel Position
     public GridBagConstraints getGridBagConstraints()
          GridBagConstraints gbc = super.getGridBagConstraints();
          gbc.gridx = 0;
          gbc.gridy = 3;
          return gbc;
     }     //     getGridBagConstraints
      *      Dispose - Free Resources
     public void dispose()
          super.dispose();
     }     //     dispose
      *      Action Listener
      *     @param e event
     public void actionPerformed (ActionEvent e)
          String action = e.getActionCommand();
          if (action == null || action.length() == 0)
               return;
          log.info( "PosSubCheckout - actionPerformed: " + action);
          if (e.getSource() == f_cashGiven) {
               f_cashGiven.setValue(f_cashGiven.getValue());
               System.out.println("f_cashGiven"+f_cashGiven.getDisplay());
          //     Register
          //     Summary
          //     Print
          if (action.equals("Cash")) {
               BigDecimal CashGiven, GrandTotal, CashReturn;
               System.out.println("Cash given is "+f_cashGiven.getDisplay());
               CashGiven = (BigDecimal)f_cashGiven.getValue();
               GrandTotal = (BigDecimal)p_posPanel.f_curLine.getOrder().getGrandTotal();
               CashReturn = CashGiven.subtract(GrandTotal);
               f_cashReturn.setValue(CashReturn);
          //     Cash (Payment)
          //     CreditCard (Payment)
     }     //     actionPerformed
}     //     PosSubCheckoutThis is the code of VNumber.java :
* The contents of this file are subject to the   Compiere License Version 1.1
* ("License"); You may not use this file except in compliance with the License
* You may obtain a copy of the License at http://www.compiere.org/license.html
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
* the specific language governing rights and limitations under the License.
* The Original Code is Compiere ERP & CRM Smart Business Solution. The Initial
* Developer of the Original Code is Jorg Janke. Portions created by Jorg Janke
* are Copyright (C) 1999-2005 Jorg Janke.
* All parts are Copyright (C) 1999-2005 ComPiere, Inc. All Rights Reserved.
* Contributor(s): ______________________________________.
package org.compiere.grid.ed;
import java.awt.*;
import java.awt.event.*;
import java.beans.*;
import java.math.*;
import java.text.*;
import java.util.logging.*;
import javax.swing.*;
import javax.swing.text.*;
import org.compiere.apps.*;
import org.compiere.model.*;
import org.compiere.swing.*;
import org.compiere.util.*;
*     Number Control
*      @author      Jorg Janke
*      @version      $Id: VNumber.java,v 1.41 2005/09/03 01:57:16 jjanke Exp $
public final class VNumber extends JComponent
     implements VEditor, ActionListener, KeyListener, FocusListener
     /**     Number of Columns (12)          */
     public final static int SIZE = 12;
      * IDE Bean Constructor
     public VNumber()
          this("Number", false, false, true, DisplayType.Number, "Number");
     }   // VNumber
      *     Create right aligned Number field.
      *     no popup, if WindowNo == 0 (for IDs)
      * @param columnName column name
      * @param mandatory mandatory
      * @param isReadOnly read only
      * @param isUpdateable updateable
      * @param displayType display type
      * @param title title
     public VNumber(String columnName, boolean mandatory, boolean isReadOnly, boolean isUpdateable,
          int displayType, String title)
          super();
          super.setName(columnName);
          m_columnName = columnName;
          m_title = title;
          setDisplayType(displayType);
          LookAndFeel.installBorder(this, "TextField.border");
          this.setLayout(new BorderLayout());
//          this.setPreferredSize(m_text.getPreferredSize());          //     causes r/o to be the same length
//          int height = m_text.getPreferredSize().height;
//          setMinimumSize(new Dimension (30,height));
          //     ***     Text     ***
          m_text.setBorder(null);
          m_text.setHorizontalAlignment(JTextField.TRAILING);
          m_text.addKeyListener(this);
          m_text.addFocusListener(this);
          //     Background
          setMandatory(mandatory);
          this.add(m_text, BorderLayout.CENTER);
          //     ***     Button     ***
          m_button.setIcon(Env.getImageIcon("Calculator10.gif"));
          m_button.setMargin(new Insets(0, 0, 0, 0));
          m_button.setFocusable(false);
          m_button.addActionListener(this);
          this.add (m_button, BorderLayout.EAST);
          //     Prefereed Size
          this.setPreferredSize(this.getPreferredSize());          //     causes r/o to be the same length
          // Size
          setColumns(SIZE, CComboBox.FIELD_HIGHT-4);
          //     ReadWrite
          if (isReadOnly || !isUpdateable)
               setReadWrite(false);
          else
               setReadWrite(true);
     }     //     VNumber
      * Dispose
     public void dispose()
          m_text = null;
          m_button = null;
          m_mField = null;
     }   // dispose
      *     Set Document
      * @param doc document
     protected void setDocument(Document doc)
          m_text.setDocument(doc);
     }     //     getDocument
     private String               m_columnName;
     protected int               m_displayType;     // Currency / UoM via Context
     private DecimalFormat     m_format;
     private String               m_title;
     private boolean               m_setting;
     private String               m_oldText;
     private String               m_initialText;
     private boolean               m_rangeSet = false;
     private Double               m_minValue;
     private Double               m_maxValue;
     private boolean               m_modified = false;
     /** The Field                  */
     private CTextField          m_text = new CTextField(SIZE);     //     Standard
     /** The Button                  */
     private CButton              m_button = new CButton();
     private MField          m_mField = null;
     /**     Logger               */
     private static CLogger log = CLogger.getCLogger(VNumber.class);
      *      Set no of Columns
      *     @param columns columns
     public void setColumns (int columns, int height)
          m_text.setPreferredSize(null);
          m_text.setColumns(columns);
          Dimension size = m_text.getPreferredSize();
          if (height > size.height)               //     default 16
               size.height = height;
          if (CComboBox.FIELD_HIGHT-4 > size.height)
               size.height = VLookup.FIELD_HIGHT-4;
          this.setPreferredSize(size);          //     causes r/o to be the same length
          this.setMinimumSize(new Dimension (columns*10, size.height));
          m_button.setPreferredSize(new Dimension(size.height, size.height));
     }     //     setColumns
      *     Set Range with min & max
      * @param minValue min value
      * @param maxValue max value
      *     @return true, if accepted
     public boolean setRange(Double minValue, Double maxValue)
          m_rangeSet = true;
          m_minValue = minValue;
          m_maxValue = maxValue;
          return m_rangeSet;
     }     //     setRange
      *     Set Range with min & max = parse US style number w/o Gouping
      * @param minValue min value
      * @param maxValue max value
      * @return true if accepted
     public boolean setRange(String minValue, String maxValue)
          if (minValue == null || maxValue == null)
               return false;
          try
               m_minValue = Double.valueOf(minValue);
               m_maxValue = Double.valueOf(maxValue);
          catch (NumberFormatException nfe)
               return false;
          m_rangeSet = true;
          return m_rangeSet;
     }     //     setRange
      * Set and check DisplayType
      * @param displayType display type
     public void setDisplayType (int displayType)
          m_displayType = displayType;
          if (!DisplayType.isNumeric(displayType))
               m_displayType = DisplayType.Number;
          m_format = DisplayType.getNumberFormat(displayType);
          m_text.setDocument (new MDocNumber(displayType, m_format, m_text, m_title));
     }   // setDisplayType
      *     Set ReadWrite
      * @param value value
     public void setReadWrite (boolean value)
          if (m_text.isReadWrite() != value)
               m_text.setReadWrite(value);
          if (m_button.isReadWrite() != value)
               m_button.setReadWrite(value);
          //     Don't show button if not ReadWrite
          if (m_button.isVisible() != value)
               m_button.setVisible(value);
     }     //     setReadWrite
      *     IsReadWrite
      * @return true if rw
     public boolean isReadWrite()
          return m_text.isReadWrite();
     }     //     isReadWrite
      *     Set Mandatory (and back bolor)
      * @param mandatory mandatory
     public void setMandatory (boolean mandatory)
          m_text.setMandatory(mandatory);
     }     //     setMandatory
      *     Is it mandatory
      * @return true if mandatory
     public boolean isMandatory()
          return m_text.isMandatory();
     }     //     isMandatory
      *     Set Background
      * @param color color
     public void setBackground(Color color)
          m_text.setBackground(color);
     }     //     setBackground
      *     Set Background
      * @param error error
     public void setBackground (boolean error)
          m_text.setBackground(error);
     }     //     setBackground
      * Set Foreground
      * @param fg foreground
     public void setForeground(Color fg)
          m_text.setForeground(fg);
     }   // setForeground
      *     Set Editor to value
      * @param value value
     public void setValue(Object value)
          log.finest("Value=" + value);
          if (value == null)
               m_oldText = "";
          else
               m_oldText = m_format.format(value);
          //     only set when not updated here
          if (m_setting)
               return;
          m_text.setText (m_oldText);
          m_initialText = m_oldText;
          m_modified = false;
     }     //     setValue
      * Property Change Listener
      * @param evt event
     public void propertyChange (PropertyChangeEvent evt)
          if (evt.getPropertyName().equals(org.compiere.model.MField.PROPERTY))
               setValue(evt.getNewValue());
     }   // propertyChange
      *     Return Editor value
      * @return value value (big decimal or integer)
     public Object getValue()
          if (m_text == null || m_text.getText() == null || m_text.getText().length() == 0)
               return null;
          String value = m_text.getText();
          //     return 0 if text deleted
          if (value == null || value.length() == 0)
               if (!m_modified)
                    return null;
               if (m_displayType == DisplayType.Integer)
                    return new Integer(0);
               return Env.ZERO;
          if (value.equals(".") || value.equals(",") || value.equals("-"))
               value = "0";
          try
               Number number = m_format.parse(value);
               value = number.toString();      //     converts it to US w/o thousands
               BigDecimal bd = new BigDecimal(value);
               if (m_displayType == DisplayType.Integer)
                    return new Integer(bd.intValue());
               if (bd.signum() == 0)
                    return bd;
               return bd.setScale(m_format.getMaximumFractionDigits(), BigDecimal.ROUND_HALF_UP);
          catch (Exception e)
               log.log(Level.SEVERE, "Value=" + value, e);
          if (m_displayType == DisplayType.Integer)
               return new Integer(0);
          return Env.ZERO;
     }     //     getValue
      * Return Display Value
      * @return value
     public String getDisplay()
          return m_text.getText();
     }   // getDisplay
      *      Get Title
      *     @return title
     public String getTitle()
          return m_title;
     }     //     getTitle
      *      Plus - add one.
      *      Also sets Value
      *     @return new value
     public Object plus()
          Object value = getValue();
          if (value == null)
               if (m_displayType == DisplayType.Integer)
                    value = new Integer(0);
               else
                    value = Env.ZERO;
          //     Add
          if (value instanceof BigDecimal)
               value = ((BigDecimal)value).add(Env.ONE);
          else
               value = new Integer(((Integer)value).intValue() + 1);
          setValue(value);
          return value;
     }     //     plus
      *      Minus - subtract one, but not below minimum.
      *      Also sets Value
      *     @param minimum minimum
      *     @return new value
     public Object minus (int minimum)
          Object value = getValue();
          if (value == null)
               if (m_displayType == DisplayType.Integer)
                    value = new Integer(minimum);
               else
                    value = new BigDecimal(minimum);
               setValue(value);
               return value;
          //     Subtract
          if (value instanceof BigDecimal)
               BigDecimal bd = ((BigDecimal)value).subtract(Env.ONE);
               BigDecimal min = new BigDecimal(minimum);
               if (bd.compareTo(min) < 0)
                    value = min;
               else
                    value = bd;
          else
               int i = ((Integer)value).intValue();
               i--;
               if (i < minimum)
                    i = minimum;
               value = new Integer(i);
          setValue(value);
          return value;
     }     //     minus
      *     Action Listener
      * @param e event
     public void actionPerformed (ActionEvent e)
          log.config(e.getActionCommand());
          if (ValuePreference.NAME.equals(e.getActionCommand()))
               if (MRole.getDefault().isShowPreference())
                    ValuePreference.start (m_mField, getValue());
               return;
          if (e.getSource() == m_button)
               m_button.setEnabled(false);
               String str = startCalculator(this, m_text.getText(), m_format, m_displayType, m_title);
               m_text.setText(str);
               m_button.setEnabled(true);
               try
                    fireVetoableChange (m_columnName, m_oldText, getValue());
               catch (PropertyVetoException pve)     {}
               m_text.requestFocus();
     }     //     actionPerformed
      *     Key Listener Interface
      * @param e event
     public void keyTyped(KeyEvent e)    {}
     public void keyPressed(KeyEvent e) {}
      *     Key Listener.
      *          - Escape           - Restore old Text
      *          - firstChange     - signal change
      * @param e event
     public void keyReleased(KeyEvent e)
          log.finest("Key=" + e.getKeyCode() + " - " + e.getKeyChar()
                       + " -> " + m_text.getText());
          // ESC
          if (e.getKeyCode() == KeyEvent.VK_ESCAPE)
               m_text.setText(m_initialText);
          m_modified = true;
          m_setting = true;
          try
               if (e.getKeyCode() == KeyEvent.VK_ENTER)     //     10
                    fireVetoableChange (m_columnName, m_oldText, getValue());
                    fireActionPerformed();
               else     //     indicate change
                    fireVetoableChange (m_columnName, m_oldText, null);
          catch (PropertyVetoException pve)     {}
          m_setting = false;
     }     //     keyReleased
      *     Focus Gained
      * @param e event
     public void focusGained (FocusEvent e)
          if (m_text != null)
               m_text.selectAll();
     }     //     focusGained
      *     Data Binding to MTable (via GridController.vetoableChange).
      * @param e event
     public void focusLost (FocusEvent e)
     //          log.finest(e.toString());
          //     APanel - Escape
          if (e.getOppositeComponent() instanceof AGlassPane)
               m_text.setText(m_initialText);
               return;
          try
               fireVetoableChange (m_columnName, m_initialText, getValue());
               fireActionPerformed();
          catch (PropertyVetoException pve)     {}
     }   // focusLost
      *     Invalid Entry - Start Calculator
      * @param jc parent
      * @param value value
      * @param format format
      * @param displayType display type
      * @param title title
      * @return value
     public static String startCalculator(Container jc, String value,
          DecimalFormat format, int displayType, String title)
          log.config("Value=" + value);
          BigDecimal startValue = new BigDecimal(0.0);
          try
               if (value != null && value.length() > 0)
                    Number number = format.parse(value);
                    startValue = new BigDecimal (number.toString());
          catch (ParseException pe)
               log.info("InvalidEntry - " + pe.getMessage());
          //     Find frame
          Frame frame = Env.getFrame(jc);
          //     Actual Call
          Calculator calc = new Calculator(frame, title,
               displayType, format, startValue);
          AEnv.showCenterWindow(frame, calc);
          BigDecimal result = calc.getNumber();
          log.config( "Result=" + result);
          calc = null;
          if (result != null)
               return format.format(result);
          else
               return value;          //     original value
     }     //     startCalculator
      * Set Field/WindowNo for ValuePreference
      * @param mField field
     public void setField (MField mField)
          m_mField = mField;
          if (m_mField != null
               && MRole.getDefault().isShowPreference())
               ValuePreference.addMenu (this, popupMenu);
     }   // setField
      *      Remove Action Listner
      *      @param l Action Listener
     public void removeActionListener(ActionListener l)
          listenerList.remove(ActionListener.class, l);
     }     //     removeActionListener
      *      Add Action Listner
      *      @param l Action Listener
     public void addActionListener(ActionListener l)
          listenerList.add(ActionListener.class, l);
     }     //     addActionListener
      *      Fire Action Event to listeners
     protected void fireActionPerformed()
          int modifiers = 0;
          AWTEvent currentEvent = EventQueue.getCurrentEvent();
          if (currentEvent instanceof InputEvent)
               modifiers = ((InputEvent)currentEvent).getModifiers();
          else if (currentEvent instanceof ActionEvent)
               modifiers = ((ActionEvent)currentEvent).getModifiers();
          ActionEvent ae = new ActionEvent (this, ActionEvent.ACTION_PERFORMED,
               "VNumber", EventQueue.getMostRecentEventTime(), modifiers);
          // Guaranteed to return a non-null array
          Object[] listeners = listenerList.getListenerList();
          // Process the listeners last to first, notifying those that are interested in this event
          for (int i = listeners.length-2; i>=0; i-=2)
               if (listeners==ActionListener.class)
                    ((ActionListener)listeners[i+1]).actionPerformed(ae);
     }     //     fireActionPerformed
}     //     VNumber

If getValue() returns null, you need to trace the execution of the code and figure out which sequence of code is leading to the return of null. This method looks complex - a lot of if statements. If you do not have a debugger, put System.out.println statements inside the method to figure out what's going on.

How to get the values from the resultset???

I have a problem with this code given below,
i am executing an sql query which return a union of values from two tables.
the problem here is how do i read the values from the resultset.
here is the code....
package com.webserver;
import java.sql.*;
public class UnionDemo{
public static void main(String args[]){
Connection connection =null;
Statement statement =null;
ResultSet rs =null;
try{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
connection = DriverManager.getConnection("jdbc:oracle:thin:@:1521:ORCL","scott","tiger");
statement = con.createStatement();
rs = statement.executeQuery("(select tablename from node where appid=432) union (select tablename from uomnode where appid=432)");
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
while (rs.next()){
System.out.println(rs.getString(1));
// instead of rs.getString(1) I also used rs.getString("tablename") but of no success....
}//end of while
}catch(Exception exp){
exp.printStackTrace();
finally{
try{
if (rs!=null) rs.close();
if (statement!=null) statement.close();
if (con!=null) con.close();
}catch(Exception exp1){
exp1.printStackTrace();
}//end of finally
}//end of main
}//end of class
when i execute this program i get an oracle error ORA-01009
which says (java.sql.SQLException: ORA-01009: missing mandatory parameter)
can anyone help to retrieve the values from this resultset...
thanx

[cut]
i am executing an sql query which return a union of
values from two tables.
the problem here is how do i read the values from the
resultset.[cut]
When the error occours?
1) Executing query ?
2) Retrieving the field from the resultSet ?
3) ecc. ?
BTW, first of all, try to execute the query removing the parenthesis
of the two select statement. I know that there are some problem
with the oracle jdbc driver about them.
Hope it helps.

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

Process and Forms - Issue with Method which Uses Imported Form Values

We are doing a project to implement ESS and MSS. Using Adobe Process and Forms we generated a process with form and workflow.
The workflow's first step uses a version of TS17900110 task to move the form to the workflow container.
Binding:
export:
&FORM_STANDARD& @0E\QAssign Value@ @9T\QGets data for...@ &FORM&
'USER_ID' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_1&
'PERNR' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_2&
'AWART' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_3&
Binding
import:
&EMPL_USERID.OBJID& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_1&
&PERNR& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_2&
&AWART& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_3&
The workflow is bringing values for: EMPL_USERID, PERNR, AWART.
We need to write these field values to a table using a method. We are using a custom task to do this.
The task triggers a method which calls a FM which makes the update to the table.
The step with the custom task is a foreground step which the workflow stops for so we can test execute it.
When we execute there is a breakpoint in the ABAP code which stopps us at the point where the values are being read.
We are trying to read values: 'USER_ID', 'PERNR', and 'AWART' but the debugger is not showing any values being brought in.
The binding we currently have for the step we feel is the problem:
This is all we have in there so far - NEED suggestions/advice:
Binding export:
&ZABSREQ&     @0E\QAssign Value@     @9T\QGets data for...@     &_WI_OBJECT_ID&
(&ZABSREQ& - This is a BOR)
Any information is appreciated.
alicia.morante at gmail.com
alicia.morante at us.army.mil
Edited by: Alicia Morante on Jan 23, 2012 8:43 PM

We were very anxious to solve this issue.
While I was posting my counterpart realized that we did not have target containers setup to receive the values from the workflow.
Once those were set the values were able to be read from the FM.
Here's the binding updated to:
&EMPL_NUM&     @0E\QAssign Value@     @9T\QGets data for...@     &EMPL_NUM&
&SUBTYPE&     @0E\QAssign Value@     @9T\QGets data for...@     &SUBTYPE&
Still gave you some points for helping - Thank you.

How does Java keep the value from temporary variable?

Hello all:
I have a Question for Java Assignment operator.
Object v1;
Object v2;
v1 = v2; // Java assignment by reference if I understand correctly
///// for example:
import java.io.*;
import java.util.*;
public class TestOne {
Vector v1;
public void changeV() {
Vector v2 = new Vector();
v2.addElement(new Integer(10));
v2.addElement(new Integer(11));
v2.addElement(new Integer(12));
v1 = v2;
public TestOne() {
changeV();
System.out.println(v1.size());
System.out.println("0: " + v1.elementAt(0));
System.out.println("1: " + v1.elementAt(1));
System.out.println("2: " + v1.elementAt(2));
public static void main(String[] args) {
new TestOne();
// Output from Screen
bash-3.00$ java TestOne
3
0: 10
1: 11
2: 12
If I understand correctly, " v1 = v2; " is assigned by reference.
So the question is when function 'changeV' return, why v1 still holds the
values from v2 which has been destroyed?
Thank you
-daniel

firstly, the assignment is by-value, not by-reference.
the value the variables hold is a thingy called "reference." (In other languages such as C or C++ it might be called "pointer.") So "v1 = v2" always copies the value of v2 to v1.
secondly, the vector object that is created in the changeV method, is created on the heap, that is, in dynamic memory. The variable v2 holds only a reference to it. So when the method returns, only the reference is destroyed, not the actual object.
The object is automatically destroyed when there are no more reachable references to it (it is "garbage collected").

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get the values from a html form embedded in a swing container

Hi all,
I am developing an application in which i have to read a html file and display it in a swing container.That task i made it with the help of a tool.But now i want to get the values from that page.ie when the submit button is clicked all the values of that form should be retrived by a servlet/standalone application.I don't know how to proceed further.Any help in this regard will be very greatful
Thanks in advance,
Prakash

By parsing the HTML.

Getting the Values from a Tiled View

Hi,
I have a TiledView and I have checkbox in the tiled view. I am trying
to get the values of the checked boxes.
I have coded like this.
Object[] links = getRSystemLinks().getCbSystemUrl().getValues();
if I see the links.length i get only one. In html If I see the code
it appends the TileIndex in brackets. If I replace the TileIndex with
0 in all the fields in endCbSystemUrl method I get the correct values.
In the TiledView beginDisplay() method my code is like this.
if (getPrimaryModel() == null) throw new ModelControlException
("Primary model is null");
super.beginDisplay();
resetTileIndex();
pgCustomizeLinksViewBean parentBean = (pgCustomizeLinksViewBean)
getParent();
((DatasetModel) getDefaultModel()).setSize
(parentBean.SystemChoicesValue.size());
Any Suggestions on this.
Thanks
Namburi

Namburi--
Remember, the getValues() method does not return the values from a column in
a TiledView. It is strictly for use by fields that can have multiple
values, like multi-select list boxes.
DO NOT remove the indexing feature from the field names, especially in the
case of checkboxes, because checkboxes aren't submitted back to the server
unless they are checked. By overriding the automatic checkbox tracking
feature JATO provides, you won't be able to tell which checkboxes were
actually checked by row--you'll simply get back a list the same size as the
number of checkboxes that were checked, without any placeholders for the
ones that weren't checked.
Instead, on submit, you simply need to move through the tiledView and check
the value of checkbox on each row:
tiledView.beforeFirst();
while (tiledView.next())
if (getDisplayFieldBooleanValue("myCheckBox"))
You can use the same construct to build up an array or list:
List checkedList=new LinkedList();
tiledView.beforeFirst();
while (tiledView.next())
if (getDisplayFieldBooleanValue("myCheckBox"))
checkedList.add(new Boolean(true))
else
checkedList.add(new Boolean(false))
Todd
Todd Fast
Senior Engineer
Sun Microsystems, Inc.
todd.fast@s...
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, October 17, 2001 3:49 PM
Subject: [iPlanet-JATO] Getting the Values from a Tiled View
Hi,
I have a TiledView and I have checkbox in the tiled view. I am trying
to get the values of the checked boxes.
I have coded like this.
Object[] links = getRSystemLinks().getCbSystemUrl().getValues();
if I see the links.length i get only one. In html If I see the code
it appends the TileIndex in brackets. If I replace the TileIndex with
0 in all the fields in endCbSystemUrl method I get the correct values.
In the TiledView beginDisplay() method my code is like this.
if (getPrimaryModel() == null) throw new ModelControlException
("Primary model is null");
super.beginDisplay();
resetTileIndex();
pgCustomizeLinksViewBean parentBean = (pgCustomizeLinksViewBean)
getParent();
((DatasetModel) getDefaultModel()).setSize
(parentBean.SystemChoicesValue.size());
Any Suggestions on this.
Thanks
Namburi
[email protected]

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Swing: when trying to get the values from a JTable inside an event handler

Hi,
I am trying to write a graphical interface to compute the Gauss Elimination procedure for solving linear systems. The class for computing the output of a linear system already works fine on console mode, but I am fighting a little bit to make it work with Swing.
I put two buttons (plus labels) and a JTextField . The buttons have the following role:
One of them gets the value from the JTextField and it will be used to the system dimension. The other should compute the solution. I also added a JTable so that the user can type the values in the screen.
So whenever the user hits the button Dimensiona the program should retrieve the values from the table cells and pass them to a 2D Array. However, the program throws a NullPointerException when I try to
do it. I have put the code for copying this Matrix inside a method and I call it from the inner class event handler.
I would thank you very much for the help.
Daniel V. Gomes
here goes the code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import AdvanceMath.*;
public class MathF2 extends JFrame {
private JTextField ArrayOfFields[];
private JTextField DimOfSis;
private JButton Calcular;
private JButton Ativar;
private JLabel label1;
private JLabel label2;
private Container container;
private int value;
private JTable DataTable;
private double[][] A;
private double[] B;
private boolean dimensionado = false;
private boolean podecalc = false;
public MathF2 (){
super("Math Calcs");
Container container = getContentPane();
container.setLayout( new FlowLayout(FlowLayout.CENTER) );
Calcular = new JButton("Resolver");
Calcular.setEnabled(false);
Ativar = new JButton("Dimensionar");
label1 = new JLabel("Clique no bot�o para resolver o sistema.");
label2 = new JLabel("Qual a ordem do sistema?");
DimOfSis = new JTextField(4);
DimOfSis.setText("0");
JTable DataTable = new JTable(10,10);
container.add(label2);
container.add(DimOfSis);
container.add(Ativar);
container.add(label1);
container.add(Calcular);
container.add(DataTable);
for ( int i = 0; i < 10 ; i ++ ){
for ( int j = 0 ; j < 10 ; j++) {
DataTable.setValueAt("0",i,j);
myHandler handler = new myHandler();
Calcular.addActionListener(handler);
Ativar.addActionListener(handler);
setSize( 500 , 500 );
setVisible( true );
public static void main ( String args[] ){
MathF2 application = new MathF2();
application.addWindowListener(
new WindowAdapter(){
public void windowClosing (WindowEvent event)
System.exit( 0 );
private class myHandler implements ActionListener {
public void actionPerformed ( ActionEvent event ){
if ( event.getSource()== Calcular ) {
if ( event.getSource()== Ativar ) {
//dimensiona a Matriz A
if (dimensionado == false) {
if (DimOfSis.getText()=="0") {
value = 2;
} else {
value = Integer.parseInt(DimOfSis.getText());
dimensionado = true;
Ativar.setEnabled(false);
System.out.println(value);
} else {
Ativar.setEnabled(false);
Calcular.setEnabled(true);
podecalc = true;
try {
InitValores( DataTable, value );
} catch (Exception e) {
System.out.println("Erro ao criar matriz" + e );
private class myHandler2 implements ItemListener {
public void itemStateChanged( ItemEvent event ){
private void InitValores( JTable table, int n ) {
A = new double[n][n];
B = new double[n];
javax.swing.table.TableModel model = table.getModel();
for ( int i = 0 ; i < n ; i++ ){
for (int j = 0 ; j < n ; j++ ){
Object temp1 = model.getValueAt(i,j);
String temp2 = String.valueOf(temp1);
A[i][j] = Double.parseDouble(temp2);

What I did is set up a :
// This code will setup a listener for the table to handle a selection
players.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
ListSelectionModel rowSM = players.getSelectionModel();
rowSM.addListSelectionListener(new Delete_Player_row_Selection(this));
//Class will take the event and call a method inside the Delete_Player object.
class Delete_Player_row_Selection
implements javax.swing.event.ListSelectionListener
Delete_Player adaptee;
Delete_Player_row_Selection (Delete_Player temp)
adaptee = temp;
public void valueChanged (ListSelectionEvent listSelectionEvent)
adaptee.row_Selection(listSelectionEvent);
in the row_Selection function
if(ex.getValueIsAdjusting()) //To remove double selection
return;
ListSelectionModel lsm = (ListSelectionModel) ex.getSource();
if(lsm.isSelectionEmpty())
System.out.println("EMtpy");
else
int selected_row = lsm.getMinSelectionIndex();
ResultSetTableModel model = (ResultSetTableModel) players.getModel();
String name = (String) model.getValueAt(selected_row, 1);
Integer id = (Integer) model.getValueAt(selected_row, 3);
This is how I got info out of a table when the user selected it

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

Get the values from Day 1 of the Month

Hi Friends,
I have a requirement in which I have to Get the values from Day 1 of the Month.
Ex : If I enter 19 - 07 - 2007.......the report should display Values from 01 - 07 - 2007.
How to Code ?
Please provide the Code.
Thank you.

Hello ,
          Check this code,
DATA: test_datum1      LIKE sy-datum,
           test_datum2      LIKE sy-datum.
WHEN 'TEST1'.
          IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'TEST2'.
        test_datum1      = loc_var_range-low.
    CONCATENATE test_datum1(6) '01' INTO test_datum2.
    CLEAR l_s_range.
    l_s_range-low   = test_datum2.
    l_s_range-high = test_datum1.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'BT'.
    APPEND l_s_range TO e_t_range.
hope it helps,
assign points if useful

BAPI/RFC which is importing the Values from R/3 environment to Portal

Similar Messages

Maybe you are looking for