BAPI_ROUTING_CREATE creates routing but no operations, without any errormsg
Hi Seniors,
I have following problem. I have to create a new routing from an existing routing.
So far it sounds easy, and it even works for the routing itself.
But whaever i export to the BAPI it wont create any Operations.
What i do is:
Reading the headdata of the existing routing.
Mapping the headdata to the BAPI-structure which i export to the function.
Reading the positiondata (operations) of the routing.
Mapping the positiondata to the BAPI-structure which i export to the function.
The real problem is that in the return table for the error-messages of the BAPI is only one record. This record is of the type state and tells me that the routing has been created sucessfully.
I have been searching this forum for quite some time to get an answer to this question, but failed.
It seems there are quite a LOT of people not knowing exactly how to use this function, since this question is widely spread throughout the forums.
BUT in most of the cases there is NO answer or well something not too useful.
Here comes my code example for those who want to have a closer look:
DATA: c_matnr TYPE mara_matnr,
wa_plpo TYPE plpo,
lt_plpo TYPE TABLE OF plpo,
wa_plko TYPE plko,
wa_mapl TYPE mapl,
lt_mapl TYPE TABLE OF mapl,
wa_cukn TYPE cukn,
wa_modify TYPE yic_gs_mod,
lt_modify TYPE yic_gs_mod,
wa_bapiplko TYPE bapi1012_tsk_c,
lt_bapiplko TYPE TABLE OF bapi1012_tsk_c,
wa_bapiplpo TYPE bapi1012_opr_c,
lt_bapiplpo TYPE TABLE OF bapi1012_opr_c,
wa_bapireturn TYPE bapiret2,
lt_bapireturn TYPE yic_tt_return,
wa_bapiplfl TYPE bapi1012_seq_c,
lt_bapiplfl TYPE TABLE OF bapi1012_seq_c,
wa_plfl TYPE plfl,
lt_plfl TYPE TABLE OF plfl.
DATA: lv_swap(60) TYPE c,
lv_ix(6) TYPE n,
lv_sttag TYPE char10,
lv_flag TYPE xfeld,
lv_mflag TYPE xfeld,
lv_plnty TYPE plko-plnty,
lv_plnnr TYPE plko-plnnr,
lv_knnum TYPE cukc-knnum,
lv_group TYPE plko-plnnr,
lv_groupcounter TYPE plko-plnal,
lv_subrc TYPE syst-subrc.
FIELD-SYMBOLS: TYPE ANY.
PERFORM get_headdata "just a simple select hiding behind this
USING i_plnty
i_plnnr
CHANGING wa_plko
lv_subrc.
PERFORM get_posdata "just a simple select hiding behind this
TABLES lt_plpo
USING i_plnty
i_plnnr
CHANGING lv_subrc.
SELECT *
FROM mapl
INTO TABLE lt_mapl
WHERE plnty = i_plnty
AND plnnr = i_plnnr.
Mappen der Arbeitsplankopfdaten in die BAPI-Struktur.
wa_bapiplko-change_no = wa_plko-aennr.
wa_bapiplko-valid_from = wa_plko-datuv.
wa_bapiplko-del_ind = wa_plko-loekz.
wa_bapiplko-task_list_usage = wa_plko-verwe.
wa_bapiplko-plant = wa_plko-werks.
wa_bapiplko-task_list_status = wa_plko-statu.
wa_bapiplko-task_measure_unit = wa_plko-plnme.
wa_bapiplko-lot_size_from = wa_plko-losvn.
wa_bapiplko-lot_size_to = wa_plko-losbs.
wa_bapiplko-resp_planner_group = wa_plko-vagrp.
wa_bapiplko-description = wa_plko-ktext.
wa_bapiplko-old_number_of_task_list = wa_plko-plnnr_alt.
wa_bapiplko-recalc_std_values = wa_plko-flg_capo.
wa_bapiplko-dyn_modif_level = wa_plko-qdynhead.
wa_bapiplko-dyn_modif_rule = wa_plko-qdynregel.
wa_bapiplko-sample_drawing_procedure = wa_plko-qprziehver.
wa_bapiplko-ind_units_ext_numbering = wa_plko-extnum.
wa_bapiplko-ident_key = wa_plko-slwbez.
wa_bapiplko-insppoint_partiallot_assgnmt = wa_plko-ppkztlzu.
wa_bapiplko-change_rule = wa_plko-chrule.
wa_bapiplko-object_change_type = wa_plko-ccoaa.
APPEND wa_bapiplko TO lt_bapiplko.
Mappen der Vorgänge (Arbeitsplanpositionsdaten) in die BAPI-Struktur
LOOP AT lt_plpo INTO wa_plpo.
lv_ix = sy-tabix.
CALL FUNCTION 'MAP2E_PLPO_TO_BAPI1012_OPR_C'
EXPORTING
plpo = wa_plpo
CHANGING
bapi1012_opr_c = wa_bapiplpo
EXCEPTIONS
error_converting_curr_amount = 1
OTHERS = 2.
IF sy-subrc <> 0.
e_subrc = sy-subrc.
rfc_exception lc_cant_map_to_bapi_structure.
ENDIF.
wa_bapiplpo-sequence_no = 0.
wa_bapiplpo-work_cntr = ''.
CONCATENATE 'VG' lv_ix INTO lv_swap.
wa_bapiplpo-operation_id = lv_swap.
APPEND wa_bapiplpo TO lt_bapiplpo.
ENDLOOP.
BAPI-Aufruf: lege Arbeitsplan an, mit untergeordneten Objekten
CALL FUNCTION 'BAPI_ROUTING_CREATE'
IMPORTING
group = lv_group
groupcounter = lv_groupcounter
TABLES
task = lt_bapiplko
operation = lt_bapiplpo
return = lt_bapireturn.
When you are sending the operation details, the sequence no should be masked to the length of the field.
for example: Sequence no = 0.
it should be masked as '000000'.
Similar Messages
-
I need an uncompressed file so I can use the resulting PDF to do a find/replace. Can't do it with compression.
Thanks
JDRHC1115Dave,
Thanks for the reply. Of all the suggestions I've received this seemed to
be most promising. I gave it a try and the problem is that when I attempt
to save as optimized a message box pops up and says I have to save my
document first. Low and behold when I save it, compression occurs. Even
when I select the options you suggest I'm left with a compressed document.
I'm using Acrobat Pro X
Jeff
From: Dave Merchant <[email protected]>
To: Jeff Ross <[email protected]>
Date: 01/06/2011 09:35 AM
Subject: Is it possible to create and save a .PDF
without any compression to the resulting .PDF?
You don't want the UncompressPDF plugin - that's designed to split out the
COS objects but doesn't remove the Flate encoding (plus if you've never
compiled a plugin before, it's not really the time to learn).
Instead, simply save your PDF file using the PDF (Optimized) file type,
click the Settings button and under "Clean Up" - "Object compression
options", choose "Remove compression". Turn everything else off if you
want to retain the PDF content exactly as it was before.
Your document-level scripts will then be in the file as plain text. -
Laptop is connected to router but can't access any...
Hi Everyone
A BT engineer came yesterday to set up BT Infinity broadband in my laptop and everything worked fine until this morning.
When I switched on my laptop and my router, the icon on the bottom right hand corner of my laptop screen indicates that I'm connected to my router but when I try to open up Internet Explorer to access any website, it says that the page can't be displayed. I've tried switching both my laptop and router on and off to no avail. I'm on Windows 7 and have an HP Pavilion g6 laptop. My router is connected wirelessly to my laptop. I can surf the net with my iPad with no problems at all which suggests that the problem is with my laptop but I have no idea what the problem is and how to fix it! Has anyone come across this problem before? Any help would be greatly appreciated. Thanks.
RosieIt could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP address and DNS server address automatically.
Once done try and connect to Internet.
Also make sure that your Wireless Network card has up to date drivers. Check on the Laptop or Network card manufatures website rather than using Windows which can be out of date. -
Creating photo slideshow in imovie without any effects
Hi, When I am trying to make a photo slide-show video in imovie, every photo comes with zoom-in and out effect. I dont like that one. I just want to show photos one after another without any effect. But I couldnt find any option in imovie. Is it possible to make one?
Please give me suggestions. Thanks in advance!
JayClick on the small icon at the top center of any photo in iMovie. You will see the options Fit, Crop, Ken burns, Done. I think you will like the Ken Burns effect after you experiment with it a bit. If you want just plain photos, click Fit and Done.
Good luck. -
How to install Deskjet 3055a, new router but unsupported operating system on Macbook
Hi,<br><br>Please go easy with me, I really know very little about all this !<br>We have a Deskjet 3055A printer which has been linked wirelessly to my iPad and a MacBook without a problem until now.<br>We have installed a new router. I am thinking that we have to amend our network in some way ?<br>I have tried to run the HP cd on the MacBook to amend it, but all I get is the message as follows...<br>"Unsupported operating system. The installer is not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below." <br>The MacBook is running OS X version 10.9.5<br>Any help greatly appreciated - thank you ! ( Please keep it simple !! )<br>We<br><br>
Welcome to the community @Teekayk
I understand you are trying to install your Deskjet 3055A on your Mac, running Mavericks. The installation CD may be compatible up to 10.6, and that could be why you are seeing the error message.
This link should help you. It will show you how to install the printer on your Mac. There is no full driver and software available for the Deskjet 3055A on Mavericks, which basically means you will need to review your other options to scan on your Mac through Apple Updates, which is all included in the guide.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a great weekend, I hope the information helps you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
A method to create halos on multiple lines without any visible overlap of the halos?
I'm struggling to find an easier way to create a uniform halos on overlapping line. It needs to be reversible. Meaning I can change it whenever I can.
Header 1
Header 2
Currently I am using a method that is time consuming, requires a lot of planning and it non reversible. I always select all the lines (hopefully I got them all), Use "expand", and then "shape mode" (Unite). Use an "offset" and the paint it black.
This works really good, however, the major drawback once I do the expand. I can't modify anything on the drawing, let say if I want to change it to a to a smaller/larger page or move a line... then I am screwed.
The second method I do is the fastest but also the ugliest. I use the appearance tab to add another larger "stroke" with a white color. Easy and fast to apply and change. But the end result is no good. The halos are not outside all the lines....Is there another method to do this and it is still reversible, or at least to a stage that is much later than the above?
//Vincentif you group the black lines - without first applying the white stroke - you can apply the stroke at the group level in the appearance panel, then move it so it is below the group contents. then it will appear below all of the black lines, not individually.
-
It never had any problems before I upgraded to iOS6. Please help!
Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB -
Is it possible to create reports in 1 month without any experience?
I'm on a project where we need to make some custom reports in the span of about a month. I'm trying to figure out what is feasible for a person, with no reporting background but plenty of SQL experience,to handle in that time frame.
The format of all of the reports would be basically the same. We want a histogram next to a window where we can enter in some information, and the histogram would change dynamically. In another frame, we would have access to detailed data (ability to view the actual records).
Thanks,
Samir PatodiaHi Samir,
You can look at the Building Reports manual for basic information on how to build reports:
http://otn.oracle.com/documentation/reports.html
For your particular case, output to portal may be appropriate. You may want to look at the Reports : Portal integration viewlets:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
At the same time, since you want end-user reporting and dynamic charts, you may want to look at the functionality offered by another Oracle product - Discoverer
http://otn.oracle.com/products/discoverer/index.html
Navneet. -
I have a problem. I use my iphone4 during one year. I bought it with firmware 4.0.2. Three or four times a day the radio module wasn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day. Just I was out of connection for incoming calls. But it happened without any warnings on my iphone. After I have upgraded firmware to 4.1, this problem disappeared (baseband 2.10.04). But a week ago I upgraded firmware to 4.3.3 and my problem appeared again (4.10.01). I changed SIM-card, but it didn't help. How can solve this problem? I want to downgrade baseband to 2.10.04. Are there another solutions?
Hi ZachBrunelle!
I'm saddened that your having trouble with your device and you efforts are greatly appreciated, let's get to the bottom of this! You mentioned your device not having any physical damage, has it been exposed to anytime of water/moisture? -
I wana creat an apple I'd , but they are asking me for my credit card detail. How do i creat an apple I'd without giving any credit card detail
Read this knowledge base article for help with that.
-
Create a schema B whose structure is same as schmea A but without any data
Hi Buddies,
I will create a schema B whose structure is same as schmea A, but without any data imported from A?
schema A in one production instance, schema B will be created in a test instance in another server.
9i database.
Is there any buddy has any good way to achive this purpose?
Thanks a lot in advance
JerryHi friends:
OK, I prepare a new exp/imp, but befoe doing that, I want to identify all errors happened in previous exp/imp
1. I set statistics=none in exp par file, now I have a clean export without any warnings. :-)
2. I checked previous imp log, found the below problem
1)
ORA-01917 user or role xxx doesn't exit-- this is not important, some users have not been created in test
instance. while, we can set grants=n in the later imp par file.
2)
ORA-01659. unable to allocate minextents beyond 63 in tablespace RPT_IN_MID
--this is seriours. I found the total same errors like below
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IRIN
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IRTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_FCPTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_FCPTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_FLFTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_FLFTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_TABLE
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_TABLE
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_FCPTB
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
ORA-01658: unable to create INITIAL extent for segment in tablespace RPT_IN_MID
but, before import, I already add datafiles to the all above tablespace one by one.
like,
alter tablespace RPT_IRTB
Add datafile '/cma7/appl/oracle/dods/dt_irtb02.dbf' Size 64M;
why still have this problem? is there anything I can improve, please advice?
3) ORA-2000 unable to set values for xxxx (object), doesn't exit or insufficient privileges.
(do I need to set user as sys in the future imp par file)?
for the database link problem, I will check after the above problem resolved.
Thank you very much
Jerry -
Sirs,
I'm trying to print from wirelessy from my MacBook Pro (OS X Mountain Lion) to a P1102w printer without success.
The error message is:
W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.W [16/Aug/2012:08:47:51 -0300] HP_LaserJet_Professional_P1102w: Printer supports Create-Job but not Send-Document operation.
The Printer Firmware is 20120130 (HP last version)
Any hints?
Regards
CamiloIt doesn't share the printer and the Mac can't print
-
How to create a report without any data
HI All, <BR> Can anyone help me in writing a report without any data. I want to create a report with list of memebers from a dimension where UDA is "My UDA". I wrote a report "<UDA(CHANNEL,'My UDA')" but this fetches me data too in the report. How to eliminate the data in the report. <BR><BR>Thanks<BR>Murali
Hi<BR><BR>Assuming you are using the essbase report writer the following script will work: <BR><BR>{ SUPPAGEHEADING }<BR>{ SUPCOLHEADING }<BR>{ SUPFORMATS }<BR>{ SUPFEED }<BR>{ NOINDENTGEN }<BR>{ FIXCOLUMNS 1 }<BR> <ROW("Dimension") <BR> <UDA(Dimension,MyUDA)<BR>!<BR><BR>the fixcolumns 1 will ensure that you only get the UDA without it you will get the variable followed by the corrosponding value.<BR>
-
Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html -
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Timing of Report (function body returning sql) w/ pagination
Hey - Wondered if someone can provide some insight here... I have a report that is dynamically created by calling a function that returns sql. Since it may return a few hundred results I have pagination turned on allowing the user to choose rows per
-
What USB 3.0 hub for a new iMac14,2 ?
Will a new iMac14,2 support a USB 3.0 hub? What models work? A scanner and a printer will be USB 2.0. An external drive and CD reader/writer will be USB 3.0. Is there a way to connect these devices to retain USB 3.0 speed on the USB 3.0 devices?
-
Deleting document from general documentation tab in implementation project
Hello, We tried to delete a document from gen. documentation tab in an implementation project, since the gen. documenation tab is greyed out, we couldn't do so. The document is a link from a template project, we tried to delete it (by using the trash
-
Smart camera / vision builder data logging
Hi I have Vision Builder 3.5 with a NI-1722 Smart Camera. I have the inspection working as I need it to but I need to log the failed data. I just can not seem to get this to work. I have attached a couple of photos of the program and hope I can get
-
Stored procedures - when to use?
Hello I'm a self-taught ASP developer who never found out about stored procedures until recently. I've got a hacker trying to put me out of business, livelihood, psychological health etc. by repeatedly attacking my database with SQL injections. So I