Barcode printing via sapscritp with ricoh aficio 2045e

Hi All,
I have to print the barcode number of delivery (eg 8000998833) via sapscrit. The printer is a Ricoh Aficio 2045th. I installed the device type ZA001016.PRI but can not print anything. I don't know where to put my head. Can someone help me? Thanks in advance.

Leo,
Seems like you don't know about the basics of barcode printing in SAPScript/Smartforms - you will need the help of abap and/or basis. I saw this response on another thread which may help you:
In traditional barcode printing barcodes are generated in the printer and not in sap system.
Hardware required - SIMM module.
In new barcode technology ,which has been included in SAP Web pplication Server 6.40
barcode printing does not required any special tecs since it is send to the printer as graphics.
But you have to convert your script to smartform.
If you are using a release after 4.6c you can use this technology by imporing the corresponding Support package .
See Sap note 430887 in sap service market.
The new bar code printing allows you to print using POST2.
Yuo can create new barcode using transaction SE73.
Also see the SAP Note-645158
Not a solution but it might help you in your search - if I find a sloution I will post it here.

Similar Messages

Can't print via network to Ricoh Aficio MP 171

Hi, I have a MackBook Pro with OS X 10.9.2 and I'm trying to print on a corporate printer/copier Ricoh Aficio MP 171 through the network, without success so far.
Actually any Mac on my work are not able to print on any of the three Ricoh MP 171 we have here.
Btw, I had this issue on OS 10.9.1, but upgrading to 10.9.2 did not fix it.
The printers doesn't have the PostScript option installed, so I installed the packages below to use CUPS:
- pxlmono 1.9
- Foomatic-RIP 4.0.6
- Ghostscript 8.71
- CUPS 1.7.1 (with 10.9.2 upgrade)
The printer supports almost all forms of connections: Bonjour, IPP, HTTP, Socket, LPD, etc.
Depeding the connection method I try to use, the behaviour is different, but in common with all ways is the following errors on system log:
05/05/14 10:37:53,468 cups-exec[1038]: sandbox cache error 3850
05/05/14 10:37:53,619 cups-exec[1039]: sandbox cache error 11: database disk image is malformed
05/05/14 09:27:37,671 cups-exec[2747]: sandbox cache error 1: no such table: main.imports
Those errors doesn't appear every time I try to print, usually they appear not in this order on the fisrt time I send something to print after reboot.
The "no such table" error sometime appears with a different table, like "profiles" and others I didn't catch.
The error below is logged every time I print:
05/05/14 17:14:45,441 aficiomp171_CUPS_SOCKET_PMO[3120]: The function `CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
I have to add the printer through CUPS, as this is the only way to select the properly PPD file for the MP 171 (from the Foomatic driver package).
I need to use a PPD file so I can set a custom User Code. If I add the printer through the System Preferences, I can't type a User Code.
The error below appears on cups error_log according the connection method:
HTTP: job remains in the queue, error "Unable to get printer status" in log and Printer Spool dialog.
Socket and LPD: job disappears from the queue, no error is logged but nothing is printed.

Continuing...
Winddows (smb) and IPP: job is paused and remains on the queue, error "The printer configuration is incorrect or the printer no longer exists" is logged on cups error_log.
What I have already tried, without success:
- reseting print system, several times, no change.
- upgrading to OS X 10.9.2 (as said before) didn't help.
- update CUPS to 1.7.2 by compiling and installing from the source code: that messed up everything else, as it installs libcups.2.dylib 64 bit only, which causes every other 32 bit app, like Chrome and MS Office to crash on start up... reinstalling the 10.9.2 update fixed this issue.
If a try to print using the PPD from Ricoh site, the job is sent without errors, but on the job history on printer web page (Ricoh WIM) is logged as "Acess Restritcted" status.
Any help is appreciated.
Thanks.

Print via Airprint with iPad 3 and Canon MG5350

Hi,
I have a very common problem but none of the so far provided answers were suitable to help me. I use a new Canon MG5350 printer with WLAN and Airprint. The firmware has been updated to version 2 and nevertheless I cannot print via Airprint from my iPad 3 WiFi. My iPhone 4 finds the Canon printer without problems but the iPad keeps saying "No Airprint printers found".
Who can help? As I said, I have updated the printer's firmware.
Cheers
Frank

Hi Frank, I too have an MG5350 and ipad3 over wireless LAN. Printer is ace when used from my PC and laptop but got the same as you did trying to print from ipad. Tried Canon UK support but useless would be a compliment. Apple support in Cork suggested going to ipad settings, switch to airplane mode which stops wifi and then switch back again, wifi reconnnects and when I try and print, it finds the MG5350 and prints! Only one problem, leave it and come back after half hour and its back to "no airprint printers found" Doing the wifi on /off trick works everytime but have no answer as to why it is dropping it but still searching.
Hope this helps a bit.

I am having trouble printing via wireless with HP Office Jet 6500A printer in our new residence. It worked in our other house but not here. I have to print via USB connection

Any ideas on how I can get a regular wireless connection with HPOffice Jet 6500A from my Mac Book Pro? It used work well and wirlessly in our previous home with a Broadband conection through the router. Would moving to ADSL have caused the issue now or is it the printer? I have had it work about three times but have resorted to plugging in via USB port. Two viviting techos have not been able to fathom it out either.

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please complete or update your system profile so the users here can properly help you.

Problems printing via AppleTalk with a Windows 2003 print server

My company is migrating from Windows 2000 Server over to Windows 2003, which is going to be the new acting print queue.
We have a mix of old and new printers (most of them HP), and our Macs have been printing to the printers via AppleTalk. With the new print server, we could not easily find the printers on the network since AppleTalk was not turned on. However, once AppleTalk was turned on, it was easy to find and add the printers. We are good so far. Before hand, I tried to add the printers via an SMB connection, but kept having problems with NT Authentication errors.
I tried printing a test page to the newly added printer, and it came back with this error:
%%[ Error: undefined; OffendingCommand: languagelevel ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
This is about the best reference I've found so far which relates to this problem:
http://www.tek-tips.com/viewthread.cfm?qid=1167812&page=1
Most of the other suggestions I've dug up so far refer to updating firmware or drivers, but I don't think that is the problem. The drivers on the old W2K print server and the new W2k3 server are the same, so it is my opinion that something on the new print server isn't turned on or isn't installed yet.
Any ideas on what the issue is here?

"Supposedly" the same exact drivers were installed for the printer -- the same driver that was used on the old print server. Might something else need to be installed?
I've found a few other cases where people are having the same error:
http://www.macfixitforums.com/showflat.php?Board=Forum39&Number=732031
Below is the error that is printed when I print a test page from http://localhost:631
SYSTEM Test Page
%%[Error: syntaxerror; OffendingCommand: --nostringval-- ]%%
%%[Flushing: rest of job (to end-of-file) will be ignored]%%
Below is the error that is printed when I try to print a document (I've tried Safari, Preview, and TextEdit).
(Username) (Untitled)
%%[Error: undefined; OffendingCommand: ]%%
%%[Flushing: rest of job (to end-of-file) will be ignored]%%

Scanning problems with Ricoh Aficio GX3050SFN

Just hooked up this All-In-One printer/scanner.
Downloaded the driver off the Ricoh site. Printer works fine but no response from scanner. Anyone know whether the scanner is supported or whether there is a work around? Not getting any joy from Ricoh...
Thanks!
Nick

http://support.apple.com/kb/DL902
Press Ricoh for scanner support.

Barcode printing with barcode.dll

Hi,
When I am trying to print barcodes, at the end of barcode it prints the control character sequence which is their in suffix control of barcode.
Could you please tell me what needs to be changed.
Thanks and regards,
Anoop

I think barcode printing via device type POST2 isn't supported by SAP Script forms.
I found out that this is supported by SMARTFORMS, as you can see in the documentation.
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
- Steffen

Ricoh Aficio SP C240 SF filter quit unexpectedly - running 10.9.3 on MacBook Air - can anybody help please?

Problems with Ricoh Aficio SP C240 SF- message tells me "filter quit unexpectedly" - running 10.9.3 on MacBook Air - can anybody help please?

Steve --
You have made an extra folder called "Internets" and put the Safari app in there. It (and all other apps) need to be freestanding (not enclosed in another folder) in the HD > Applications folder.
Because it's in this folder, it has not properly updated. Running 10.8.2 OS, you should be up to 6.0 Safari. But because it's in a folder, it's still way back there.

Problems Printing Ricoh Aficio 1045 via IPP (Error with Exclamation Mark)

Two of our offices use Ricoh Aficio 1045 and I'm having difficulty printing to either printer via my MacBook (Op System: Mac OSX 10.4.10). I've tried using IPP and have downloaded the proper drivers, but when I press print, a printer icon appears on my Dock and sports a red exclamation mark! From there, it seems like my printer job has been stopped, so I click on Start printing, but nothing happens and it seems my print job isn't even spooled. Can someone tell me what is going on?

Here's the most likely problem - IPP (Internet Printing Protocol, NOT IP printing) and LPD both require that you enter both the IP address and the printer/server/device queue name. The queue name is a required part if the address to route data to print. It can usually be found in the manual and is sometimes called port name. The HP Jetdirect protocol is called TCP/IP raw or TCP/IP port 9100 printing in manuals and it doesn't use a queue name. "PORT1" and "print" seem to be common Ricoh queue names
The drivers you downloaded may be for postscript. If your printers don't have postscript, you should be able to use the HP Laserjet 6 Series Gimp-Print driver included in OS X.

Ricoh Aficio 2018 printer not working with 10.9.1.

Hi All. Please help. I am unable to get Ricoh Aficio 2018 printer to work. I am running 10.9.1.
I have got it working once by downloading the foomatic, ghostscript and pxl drivers, but we moved and I had to dismantle everything and now it won't work. Last time we had a modem/router that the blue cable from the Ricoh was connected to, but this time we have a USB modem so the blue cable is connected straight into the iMac.
I have printed a config page from the Ricoh and see that DHCP is on, and it gives me the IP address, but when I go into system prefences in the iMac and try to add a printer with this IP address, it just doesn't work like last time. I choose LPD as the protocol and search for the Rich Aficio 2018PXL option for the use, but still not working.
any ideas would be massively appreciated.
thanks

Shrunken wrote:
I made those changes but strange thing is that the facsimile button lit up as red and I don't even use the fax function on this multifunction machine.
When this occurs with our Canon's it is due to the document feeder being unavailable for some reason, such as some other machine function is using the feeder. Other than that I'm not sure why this would occur.
Shrunken wrote:
I thought I would check with you about what I should set the 'delivery options' to. If you choose on then there are 2 tabs - server 1 which is current 10.0.0.2 and server 2 which is 0.0.0.0. should this be set to on?
Not really sure what this "delivery options" setting is for. Normally when I see that menu it is for what happens with the document after it is delivered.
That first server address sounds like a local router address. Maybe a left over from the previous network configuration? If I knew more about what this setting was meant to achieve then I may be able to answer better. I will see if I can find information from Ricoh.
Shrunken wrote:
Also I checked in the 'about outlook' and the incoming server was different to what I had emailed to you. so I changed it to what was in outlook. I hope that is right?
Yes. It would be the correct approach to use the same settings in the copier as you have set in a working email client.
Shrunken wrote:
Also, under scanner features/destination list settings there are two options:
- destination list priority where you can choose either email or delivery server. which should I choose here?
- update server destination list. when I choose this one, it tells me that it has failed.
I would think that you want email, as you are attempting to connect directly with the email server.
And I'm not sure what the update destination list is mean to do. You may have to contact Ricoh for help on this.
Just one more thing to note. Because you are connecting the Ricoh directly to the Mac via Ethernet cable, you will have to enable Internet Sharing on the Mac so the Ricoh can connect to the Internet and thus Bigpond. This setting is located in System Preferences > Sharing and you will need to set "Share your connection from:" to the USB modem and the "To computers using" to Ethernet.

Problem with printing barcodes to a Zebra printer via Smartform

Hi
I am trying to create a printed label from smartforms, being directed to a zebra printer. The label must include a barcode.
Via oss notes 750002 and 750772 I have imported the LZEB2 device type.
In SE73 I have created a system bar code on the new technology.
In the smart form style, I create a character type with this barcode font.
The barcode prints okay and can be read when it has up to 10 characters.
However we need a long bar code of appoximately 22 characters.
I can find no supported barcode type which will let me write a barcode of this length
The max length in the smartform style for the barcode format is always coming up as 50mm which is too short.
I have tried with using a printer bar code prefix and suffix with the native zebra ZPI-II commands, attaching to command nodes on either side of the text node in the smart form, But this does not seem to work.
Any advice ?
Thanks

sounds like the variable containing the barcode data is too short...is it at least 22 characters long?

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

Ricoh Aficio MP C4501 with access codes for color printing

Hi,
I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
Is PostScript module installed?
No, I guess. PS is not one of the languages included on the Configuration Page.
What languages does your printer understand?
RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
What drivers are you using?
I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
How are you entering your User Code?
Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
How are you connecting to the printer -- what protocol?
I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
Any help is appreciated. Thanks.

Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

EMac (PPC) with 10.4 and a Ricoh aficio C5000 printer

I am having problems with an eMac (PPC) with 10.4 and a Ricoh aficio C5000 printer connected to the network, does anyone have a solution? I can connect it the mac but it doesn't print exactly what I want.
1 page of what I want to print = ~24 what is actually printed
It doesn't work the connection through the appletalk protocol so I used the TCP/IP protocol.

Appletalk can only use one port at a time, check System Preferences>Network & see which Interface has it enabled.
Here in 10.4.11 it's enabled for Airport...

My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite

My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite. When printing one page of something, ten pages or so of machine language will print out. It is on my home network and the IP address is correct.
Thanks for any help.

This can also happen when you use a Postscript driver but the printer does not support Postscript. According to the Ricoh Australia web site the MP2500 supports PCL standard while Postscript is optional. So it would be safe to assume that you don't have the Postscript kit and that's why you are getting all those pages with Postscript commands.
One thing you can do is remove this printer from Printers & Scanners and add again, this time selecting the Generic PCL Laser printer in the Use menu. Note that this printer is set to 300dpi by default, but you can change the resolution to 600dpi via the printer menu so that you get better looking prints.

Barcode printing via sapscritp with ricoh aficio 2045e

Similar Messages

Maybe you are looking for