Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

Similar Messages

My Macbook Pro Won't boot. Unable to find the driver for this platform

Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!

Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.

How can a fix my macbook pro with a Panic Kernel "Unable to find a driver for this platform"?

After a required update, my computer shutdown and it has never start ups again! On the screen apears a msg saying
" Unable to fins deiver for this platform" \"ACPI"\ .\"@/Sourcecache/xnu/xnu-2050.20.9/iokit/Kernel/IOPLatformExpert.ccp:1548
Debugger called: <panic>
backtrace (CPU 0), Frame: Return Address ...

You've posted this in the iPad forum.

Unable to find connection 'MyConnection' for object MySetting

I have a connection string in my App.Config for Visual Studio 2012 Express for Desktop.
The App.Config and Connection String like following,
It was working to connect,
Suddenly, I got 'unable to find connection 'MyConnectionString' for Object MySetting, The Connection string could not be found, or data provider associated with Connection String could not be loaded' when I tried to config query on for Data Adapter on DataSet.xsd
files.
Any suggestions is appreciated,
Regards,
Souris,
<?xml version="1.0"?>
<configuration>
    <configSections>
    </configSections>
    <connectionStrings>
    <add name="MyProject.My.MySettings.MyConnectionString" connectionString="Data Source=MyServer;Initial Catalog=MyDatabase;User ID=MyUser;Password=MyPassword;encrypt=true;"/>
    </connectionStrings>
      <startup>
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
</configuration>

Keith, I can already access the hidden status page, what it is NOT showing me, is the duration of my active connection which is what I need to see.
That status page just shows me the following stats:
Configured
Current
Line Status
SHOWTIME
Link Type
Fast Path
[Go Top]
Data Rate:
Stream Type
Actual Data Rate
Up Stream
288 (Kbps.)
Down Stream
2272 (Kbps.)
[Go Top]
Operation Data / Defect Indication:
Operation Data
Operation Data
Upstream
Downstream
Noise Margin
27 dB
28 dB
Attenuation
40 dB
--- dB
Defect Indication
Indicator Name
Near End Indicator
Far End Indicator
Fast Path FEC Correction
0
0
Interleaved Path FEC Correc
0
0
Fast Path CRC Error
2
0
Interleaved Path CRC Error
0
0
Loss of Signal Defect
0
0
Fast Path HEC Error
0
0
Interleaved Path HEC Error
0
0
[Go Top]
Statistics:
Received Cells
2838470
Transmitted Cells
2336236

ERR-1002 Unable to find item ID for item "F145_QUERY" in application "4000"

Hi all,
First I will give you an overview:
APEX version: 3.2.1.00.10
DB Version: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
Now the problem description:
I have a report region of type: Function body returning sql_query.
After the sql_query is written into a variable, I would like to fill an application_item or page_item. The problem is, it is returning the error:
ERR-1002 Unable to find item ID for item "F145_QUERY" in application "4000"
After that I tried to create a stored function (return varchar2, because a sql_query is generated) which has got the same structure. Also I am trying to fill the session state of the application item.
Then I am just having the following code in my report region:
declare
q varchar2(30000);
begin
q := function_name;
return q;
end;
Funciton example:
create function simple_example return varchar2 is
q varchar2(30000);
begin
q := 'select sysdate from dual';
apex_util.set_session_state('F145_QUERY', q);
return q;
end;
But even then I am getting the error.
Is it a bug? And how can I solve the problem?
Any help is highly appreciated. Thanks in advance,
Denise

Hi Scott,
most of the time the obvious solution is the best, I agree.
But I have checked that one, before I posted the thread ;-)
And yes, the error message really says Application 4000. That is, why I am so confused, cause I know that that is the APEX itself.
The actual code is written within the report region. As I said, I tried 2 versions.
The second version is explained above and the first version was the code within the report region:
declare
q varchar2(30000);
begin
q := 'select sysdate from dual';
:F145_QUERY := q;
return q;
end;
The report region is a normal report with source_type = Function_returning_sql_query.
That is all I know, and now I hoping to find someone who has got an explanation or a even a solution for this. :-)
Thanks,
Best regards,
Denise

Error: ERR-1002 Unable to find item ID for item "APP_SESSION"

Hello all,
I created an application for faculty in HTMLDB 1.6.
To get to the application faculty members log into a different website, and then follow a link to my application. The link re-directs them to a public page which pulls their unique ID from a cookie stored by the first website. After their ID is found they are automatically logged in, or if the ID is not present they are redirected to the main login page.
A few faculty members have tested the automatic login with success. One member, though, followed the same steps, but when he clicked on the link and was re-directed to the application he recieved an error "error: ERR-1002 Unable to find item ID for item 'APP_SESSION'."
As for the code, the code first retrieves the cookie and gets the ID from it. The variable term_id is then set to the correct term value. This term value depends on what term was selected from the previous application. The term value may or may not be null (they are not required to select a term prior to being re-directed). If it is null, the faculty member is brought to a term selection page. If it is not null, the faculty member skips this step and moves on to the next page. These steps are known to work properly.
This plsql code follows directly after, which should login the user and either redirect him/her to the term select page if the term value is null, or the main page if there is a term value present:
IF term_id IS NOT NULL THEN
wwv_flow_custom_auth_std.login(
P_UNAME => faculty_id,
P_PASSWORD => faculty_password,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':MAIN_PAGE:'||:APP_SESSION||'::::TERM_ID:'||term_id
ELSE
wwv_flow_custom_auth_std.login(
P_UNAME => faculty_id,
P_PASSWORD => faculty_password,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':TERM_SELECT_PAGE:'||:APP_SESSION
END IF;
owa_util.redirect_url('f?p=FACULTY_APP:LOGIN:&SESSION_ID.');
The last part redirects them to the login page if all else fails
Any idea why one faculty member would receive the message "error: ERR-1002 Unable to find item ID for item 'APP_SESSION'" while others would not?
*NOTE: All variable and alias names here are not the actual names within the application.

Ah, i see. I thought you only had to use v('APP_SESSION') in the login function while assigned the value of P_SESSION_ID, but I was wrong.
Thanks a lot Scott! It works perfectly now.
Tim

Error ERR-1002 Unable to find item ID for item "ID" in application

Hi everyone,
I'm new to APEX and I've come across this error for the first time. I have a page with a classic report in it, and I want to create a link from one of the columns in the report (ID column) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to the other page and to only see the information for ID 118.
After creating the column link I receive the error message when I run the application:
Error      ERR-1002 Unable to find item ID for item "ID" in application
I've tried creating a link from one report to another before and it worked fine.
Thank you!
P.S. I'm using APEX 3.2

So, on page 1 I have some columns from a table (ID, name etc) and I want to link the values in the ID column to a report on page 2, so that the columns in page 2 (order no, type etc) show only the information for the ID I clicked on in page 1. I went to Page Definition -> Regions -> Report link -> click on the "edit" icon on the left of column "ID" and in the Column Link section I have the following:
Link text: #ID#
Link Attributes: title="Click to see deal information."
Target: Page in this application
Page: 2
Clear Cache: CIR,2
Item 1:
     Name: ID
     Value: #ID#
I have no item called ID on page 2.
Thank you!
Adina

Bug Report APEX 4.2(.1) : Unable to find item ID for item "P3500_RELEASE"

1. On the Home Page, click the "Settings" wheel in the header of the Team Development region on the right side.
2. On the Home Page Preferences popup set "Show" to something else as "All" and click [Apply Changes]
3. Back on the Home Page, in the Team Development region on the right side, click the number next to "Bugs"
4. ERR-1002 Unable to find item ID for item "P3500_RELEASE" in application "4800".

Patrick -
I decided to drop back and implement the demo to change the email address on my EBS login per the 2015 white paper.
Something is definitely wrong here..
The FND: APEX URL Profile option is set to: http://appstest4.fubar.com:7001/ords
The Function to call the pag is set toe: GWY.jsp?targetAppType=APEX&p=110:1:::::EBS_RESP_ID, EBS_APP_ID,EBS_SEC_GROUP:[RESPONSIBILITY_ID],[RESP_APPL_ID],[SECURITY_GROUP_ID]
When I call the page though, the URL is http://appstest4.fubar.com:7001/ords/f?p=110:LOGIN_DESKTOP::::::
Is is possible the jsp is not the correct one?

Need help finding a driver for our NI A/D board

My A/D board has the following numbers: 70243 and 84-01 and 3199F. Help me find the driver

All of the NI drivers can be located on the NI Drivers and Updates page. In order to find the required driver, you will need to know what the device is called. You can find this information in several different ways. One way is to visually inspect the device. If it is an NI device then it should list the device name somewhere on the board. Also, you could locate the part number. This number usually ends in -01 or -02 and is printed near a bar code. If you can find this number, then simply type it into the search on ni.com to locate the name of the device.
When the name of the device is figured out, you should then determine the appropriate driver for the device from the Drivers and Update page linked above.
If it is not an NI device, then you will want to view the device manufacturer's webpage for available drivers.
Please do not post back to this message as I do not believe the message pertains to the NI Measure software. The question is more related to a specific piece of hardware. Thus, you should repost this question, if another exists, to the appropriate NI Hardware category.
Best of luck.
Jared A

I need to buy an external hard drive for my MacBook Air as it is almost full. Which one should I buy?

Do I need to buy an Apple external Hard Drive for my MacBook Air?

There is no such thing as an Apple hard drive, ...Apples doesnt make same.
avoid western digital if possible.
Yes, having an external HD is necessary for data backups and keeping large media files for packing around etc.
you need data redundancy.
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
Best small HD for the money:
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]

Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64

Unable to find security data for sender

Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
<SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
</SAP:ErrorHeader>
regards
Ernesto Duran

HI,
i am also getting the same error in my scenario. Could u plz inform me what is the solution?
Rgds,
Ram Sri

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

VISTA - can;t find device driver for your IPOD - read the solution here!

It would appear that VISTA is rather stupid when it comes to the Ipod - it can't find the driver for itself. Do the normal autmatic way of trying to find the driver (that doesn't find the device) then look in the hardware device list (control panel) you should see you Ipod listed under other devices with a yellow triangle next to it. Right click this line and select "properties". then click "update device driver". Then, DON'T do the automatic find, instead click "I will choose the device from a list". Click on "storage device" and voila! VISTA now finds a USB mass storage device and installs it - JOB DONE! HOORAY!
good luck!
Mark.
Ipod 5G video colour Other OS WINDOWS VISTA ULTIMATE

When you are prompted to look for a driver input
C:\WINDOWS\System32 and browse it will find a generic
volume that fixes it.
I tried this as well. I can find a Generic Volume (I think it lists SD, MMC- neither of which seem correct), but neither of those helps. iPod still isn't recognized as a drive even in disc mode. I started another thread after not finding this one. I'm not sure why USB Mass Storage device isn't one of the options.

New MacBookPro. Where can I find a driver for my Microtek Scanmaker 3600

I recently bought a new MacBook Pro (10.6.8) but to date, haven't been able to find any software/driver to use for my scanner, including the Microtek site. I have a Microtek Scanmaker 3600 that still works perfectly. I have searched forums and online sites for software to use the scanner on the new laptop and hate to think I need to buy a new scanner when the 3600 works fine. I have an HP Deskjet 930C and was able to find the software/driver to use on the new laptop. Does anyone know where I can find the software/driver to get my scanner to work?
Where can I find a driver for my Microtek Scanmaker 3600. Tried VueScan and TwainSane without success. Do not want to buy a new scanner when old one runs great. Please Help?
Thanks!

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

Similar Messages

Maybe you are looking for