BarLine Combo graph data labels

Hi All,
In a bar-line combo graph, i want to show the data labels of the bar always and show the line data labels when i rollover it. how can i implement it?
I changed the 'show data labels' to 'always' in general chart properties which is making all the labels to show instead i just want bar data to be shown always.
Thanks

You might have to build a custom chart type (by copying the original) and modify the system properties to acheive it ... but really I'm not sure if you'll get that level of control.

Similar Messages

Graph Data Labels in OBIEE 11g - Customizing

Hi folks!
Would somebody know how to select what is shown in graph data labels in OBIEE 11g?
For example in a scatter graph data label I'd like to show the Group only (not the combination of Series, Group, X and Y, as by default). For a pie chart one can select the data shown in data labels to some extent (name / value), however couldn't find this option for scatter graph.
After searching I could only find instructions for 10g - such as John's instructions at http://obiee101.blogspot.com.es/2008/01/obiee-xy-and-data-in-mouse-over-label.html.
However, my understanding is that the graph engine in OBIEE 11g is now different, and the 10g instructions are not valid for 11g anymore.
I was also having a look on the .cxml files in OBIEE 11g but those seem to relate to colors only?
Any help appreciated, best regards,
Ilmari

hello,
i'm facing the same situation here,did you find a solution for your problem?

Can't show data labels in pie graphs as decimal number if the crosstab data

I want to show my data labels in diagrams, as percent values, with three decimals.
It occurs (in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)) it is only possible if the data format of the crosstab data also shows data with decimals. If the data are in integer format, the graphs data labels can only be shown in integer as well.
Does anyone know how to fix the problem?
In version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18) we can have a crosstab showing integers and a pie graph showing labels of pie slices where the labels are in percent with three decimals. It seems it does not work in the newer version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Thanks in advance

It seems I have another similar problem in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26):
I have a Bar (Percent) graph based on a crosstab where the data is formatted as number with two decimals.
The labels in the graph shows as number (0,76 instead of 76% and 0,13 instead of 13%). I want them to be shown in percent format.
The Data Label format is set to “Number” with two decimals. I can change the Data Labels to Percent with two decimals and then it shows the data labels in the graph exactly as I want it. But after I have saved the workbook and then opened it again the changes has been “revoked” and is once again set to number with two decimals instead of percent.
thanks (again) in advance

Can not edit data labels in old graph chart objects using Word 2010

In Word 2010, Insert object "Microsoft Graph Chart", go to Chart Options and check an item in Data labels, such as "Series Name", "Category Name" or "Value". Click OK, then double-click on a data label to edit its
settings, or right-click on a data label and select "Format Data Labels..."
This makes Word to crash. The only way I can get out of it is by using the Task Manager to kill Word.
This happens in Windows 7 and Windows 8. This does NOT not happen in Word 2007 nor Word 2013, so it seems specific to Word 2010. All our clients have the same problem, this does not seem related to a specific workstation configuration.
The Microsoft Graph Chart are the old charts used within .doc files. I have an application still generating those types of files and need to edit data label settings manually before processing the files with my application.
Also note that anytime you edit a .doc file in Word 2010 and you see "Compatibility Mode" in the title bar, the Insert / Chart option from the ribbon inserts an old type chart (same as if you use Insert / Object / Microsoft Graph Chart), not the
new Word 2010 charts. You then have the same problem editing the data labels.
The underlying Activex seems to be the Chart.Exe file, the one I have installed is 14.0.7012.1000. You can see the version by double-clicking the chart and then look in the Help / About menu.
Any help will be greatly appreciated.

As this is a configuration issue and not a programming issue I' moving your question to a more appropriate forum where you're more likely to find assistance.
Cindy Meister, VSTO/Word MVP,
my blog

Adding data labels to column graph

I work in the financial industry and I have to add data labels to all bars that appear in my ten year performance graphs (see http://fundinvestor.calamos.com/ClosedEndFunds/CEFund.aspx?name=CHI under the "Performance" tab as an example). Is there a script that can do this? I saw there's this technique that Adobe offers for column totals: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS714a382cdf7d304e7e07d 0100196cbc5f-619e.html but that's not working. What am I doing wrong? Adding data labels to bars is ridiculously simple in Excel, why can't I find the way to do it easily in Illustrator?

http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-619ea.htm l
That should do the trick.
Mylenium

Graph Data does not align with the axis label

Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.

Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi

Not able to use more than 5 data labels for chart in Oracle BI Publisher

I am currently working in Oracle BI Publisher 10.1.3.4.1 .
I created data template and rtf template.Uploaded data successfully and was able to generate a chart also.
But now the problem is that my output is having 14 columns and BI publisher chart is giving only 5 data labels to include.Please let me know how i can add more data labels to be included in the chart.
Im trying with Bar-Vertical-Stacked chart.

Inorder to add more labels using corresponding tags
<RowLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</RowLabels>
<ColLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</ColLabels>
To Know more follow the link
http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html#LocalGridData
Thanks
Shyam

Format % in chart label when Data Label Option is 'Show Series and % value'

I am using:
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
I have a report that returns 2 columns 'Repair Status' and 'Count' The graph is a pie chart and I have selected the Data Label Option as 'Series Label and % value'. The percents displayed in the label have no consistent format. Sometimes 2 decimal places, sometimes 4 decimal places. I want the chart label to consistently display the % in the chart label with no decimal, i.e. 96%. How can I accomplish this?

Hi,
Where you selected 'Select Label and % Value', there is a button at the bottom, Format Data Labels. In there, there is a Number tab where you can play around by selecting Currency, Percent, etc. Have you tried this?
Cheers.
Mahesh

Crystal Reports 2008 Pie Chart Data Labels

Hi,
I've been trying to figure out why I cannot get the option to put pie chart data labels in the center of each slice. There's an option to place them there, but everytime I select it, the graph reverts to putting the data labels on the outside with leader lines. I was able to do it once, for one pie chart, but have not been able to get it to work for any others. I've even tried creating a pie with only two slices in case there's a slice size limit below which the data is placed outside. There doesn't seem to be any rhyme or reason why it worked once and now won't work again.
Thanks,
-Jim
Edited by: jwmckay on Apr 23, 2010 7:19 PM

Hi Jim,
The issue could be faced because of the 'Auto-arrange' layout option enabled from Chart Expert within the report.
This option allows Crystal Reports to reset the chart layout to its original size and position
To uncheck the 'Auto-arrange option':
- First Go to Chart Expert-
- Click on the Options Tab
- Uncheck Auto - Arrange
- Click OK
I hope this helps,
Selenia

Same columns multiple time in Line - Bar Combo Graph

Hi,
i am trying to generate a Line-Bar Graph, where I will have 2 measures "Capacity" & "Utilization Rate" in both Line as well as Bar Format.
I tried taking theses two columns twice in my criteria and then designing it but it does not show properly (as per the scale) sometime when the scale is modified the Line Graph vanishes.
Kindly Suggest.
Regards,
Jitendra

<DataLabels Visible='True' Font='Name:Helvetica; Size:14; Style:Bold; Color:Black;' Position='OutsideTop' ShowOnRollover='False' TransparentBackground='False' BGColor='#b2ccb2' BorderType='Thin' BorderColor='#667f66' AlwaysShowDecimalPlaces='False' NumberType='General' UseThousandsSeparator='True' DecimalPlaces='2' NegativeDisplayType='MinusSign' ShowAsPercentageType='None' ShowOneValueOnStacked='False' ShowPercentDecimalPlaces='False' PercentDecimalPlaces='2' WrapWidth='400' FormatString='%_VALUE' TimeFormatString='%m/%d/%y %T' DrillDownHighlightColor='Blue' DrillDownEnable='False' ShowBarZeroValues='False' TopMargin='2' BottomMargin='2' LeftMargin='3' RightMargin='3' UseAbbreviation='True' />
I've tried using the Position parameter in the example posted above but nothing I try will allow me move the data label centered in the bar versus sitting on top outside of the bar. Any ideas? It seems strange not to have an option of positioning the data labels.

Show 2 line graphs together in Line bar combo graph

Hi,
I am currently working on to show data for 2 years (which will be selected through prompt), month on month basis in Line-Bar Combo Graph.
I could achieve to show 2 years of data month on month basis in Bar Diagram, but the same is not happening for Line diagram.
In Line Diagram, values for 2 years are joined and shown as a single line, where as I want to see 2 separate lines for the years selected.
Kindly have a look at the link below:
!http://i42.tinypic.com/cuek8.jpg!
Any suggestions?
Regards,
Jitendra

Hi,
I am putting up the snapshot of what I have done,
!http://i42.tinypic.com/2j8jkx.jpg!
As you can see in the image, I have
1. Utilization Rate &
2. Attendance Booking
as my fact.
I can arrange the Attendance booking (Bar Diagram), as Month-on-Month basis for any 2 years.
My aim is to plot Utilization Rate, in the Line Diagram. Currently it's been shown as One Single Line, I want to see 2 different line for the 2 years selected.
Kindly help.
Regards,
Jitendra

Formatting bar chart data label

Post Author: dkekesi
CA Forum: General
Hi All,I have a chart that contains how long it took to perform a certain task for each user (user name is on the X axis, times on the Y axis). The problem is that the data is displayed in seconds. I wish to format the data label on the bars so they show 00:45:42 (in hh:mm:ss format) instead of 2742 seconds, for example.I have not found a way to do this. Is there a way at all?Thanks for the help. Daniel

Post Author: V361
CA Forum: General
I have CR XI, not sure if this is supported in earlier versions. You can create a formula, and use the formula in the graph. For example:
Numbervar Totalsec := Sum ({@Login Hrs secs}, );
NumberVar Days :=(Truncate (TotalSec / 86400)*24);
NumberVar Hours :=(Truncate (Remainder (TotalSec,86400) / 3600))+ Days;
NumberVar Minutes :=Truncate (Remainder (TotalSec,3600) / 60);
NumberVar Seconds :=Remainder (TotalSec,60);
Hours & ":" & Minutes & ":" & Seconds
The addition of *24 in the NumberVar Days sum combined with the addition of days to the NumberVar hours gives a total time in hours no matter whether in excess of 24 hours or not.
Use this formula in your chart. instead of your seconds field.

Unable to change Data label position in the Chart using Position from Properties

Hi All,
I am trying add the Data label to the chart and the users want them to appear on the top of the stacked bars. By default when I enabled the data labels it showed up in the middle. When I tried to change the position by doing
View --> Properties --> Position --> Top/Bottom/any of other 8 options -- it does move a bit
I even tried deleting chart and recreating it.
What am I missing? Thanks in advance.

Hi Ranjith_SQL,
According to your description that you have add the Data label on your stacked column chart which by default display in the middle of the chart, you want them to appear on the top of the stacked column chart, right?
For a Stacked Column Chart, the data labels are always placed in the center of the Series bars. This is by design. I also test it on my new version of SSRS 2014 and find have the same result.
If you really need the data label to display on the top, I recommend you to change the chart type to column chart which by default have the Data labels display at the top of the column:
You can also submit an wish at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks for your understanding.
Regards
Vicky Liu

Date label in mail app on iPad not same as actual date in email header

Hello everyone
I've been experiencing some problems with my iPad's email, the date label (displayed in blue) when viewed in the list of emailed received, doesn't correspond to the actual email's date as displayed in the email's header. For example, when viewing the list of emails, the blue label shows the date as 'Yesterday' when the actual date the email was received at was 4 days ago! This also happens in a different way, the label shows 'Sunday' when the day it was received on was in fact Wednesday..this is becoming quite annoying as it keeps pushing the old email along with the emails that were actually recently received.
I'd appreciate any suggestions for solving this issue..
thanks!

yes I have, also checked the time zone, just to be sure ;-)
it just happened suddenly and I'm not quite sure what triggered it..
anyway, thanks for your response.. I'd love to hear any other suggestions you might have..

How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi ‏500 KB

What you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

BarLine Combo graph data labels

Similar Messages

Maybe you are looking for