Basic question about the usage of LIKE operator

Hello,
I have a parameter that I want to use in a LIKE clause as follows:
match returned if the field is LIKE the third parameter.
LIKE '%'?3'%' This does not work as intended. Can anyone help?
Julien.

shouln't it be
LIKE '%?3%'
(just two quote marks instead of four)

Similar Messages

Basic questions about the CM handling of Photoshop

I have some basic questions how Potoshop handles colour management. Most probably this has been discussed many times before, but frankly, the manual is pretty poorly written on this subject. I do understand the principle of colour management pretty well, but am not sure whether I understand what Photoshop is doing. So could somebody please comment whether my reasoning is correct or not.
Let's assume my monitor is calibrated and its profile loaded in OSX's monitor preference panel. Let's further assume I'm working strictly in RGB.
Is the following correct:
• When I open a picture which has an embedded profile, then Photoshop first calculates the "true" values from the embedded profile (whatever this means) and from this point the screen representation based on the profile which I defined in the system pref pane. So the screen representation remains always the same, regardless of the embedded profile (besides some possible conversion artefacts, especially on the edges of the colour space).
• The same holds true in the opposite direction, so when I work on that picture on screen, then no matter which RGB space I pick as my working space, the result will always be exactly the same (except those aforementioned artefacts).
• Hence it doesn't matter which RGB colour space I choose as my working space, it could be sRGB, Adobe RGB, "my own wild profile", whatever, the results are always the same. Of course the RGB values will differ, but this will be compensated by the embedded profile.
• Yet the theoretically best working space is the colour space of my monitor, because this minimizes possible artefacts.
• When I "convert" the picture from one profile into an other, then not only that new profile is assigned and embedded, but also the RGB values are recalculated accordingly, so that the result will remain the same. For example, I could first "convert" a picture from the camera space to my monitor space, then work on it, and finally "convert" it to sRGB before uploading it to a web site.
• When I "assign" a new profile, then a new profile is simply assigned and embedded but the RGB values are not adjusted. So the RGB values remain the same, but because a different profile is embedded, the picture will actually be changed. Since Photoshop will recalculate the screen representation based on that new profile (and the monitor profile), I will see this change on the screen. (This action doesn't make much sense, except maybe to simulate the possible outcome on a system which misinterprets the profile, e.g. assumes sRGB.)
• And finally, when I leave the picture untouched but change the monitor profile in the system pref pane, then of course the picture will not change, but its screen representation will change, because Photoshop uses that profile to calculate the screen representation. (This action makes even less sense, of course.)
Have I understood? Then I have two final questions:
• When I open a RGB file without any profile in it, what does Photoshop assume? How does it calculate the screen display? What does it do if I "convert" such a picture or "assign" a profile?
• If I select in the colour settings as working color space the monitor space, then the colour managment rule for RGB changes to "Colour management off" and can't be changed to a different value. I don't understand this.
Thanks for your patience.

• Yet the theoretically best working space is the colour space of my monitor, because this minimizes possible artefacts.
No.
(Edit: Any one screen usually has to be considered incidental, changing and transient and is not the target-medium, so it makes little sense to work based on its specific limitations.)
• When I open a RGB file without any profile in it, what does Photoshop assume? How does it calculate the screen display? What does it do if I "convert" such a picture or "assign" a profile?
If one opens an unprofiled file, Photoshop treats it as if it had the profile selected under RGB-Working-Space embedded and calculates display and conversion on that basis.
(Edit: And that’s the danger of unprofiled files – they would look different if someone edited them who used a different Working Space.)
Assigning such a file a profile is no different from assigning a profiled image a different profile – the RGB-values remain unchanged, the »key« for interpreting them changes and subsequently it will be displayed differently.

A few (basic) questions about the iPhone

I just got my iPhone 3GS about a week ago. I am very new to the whole smartphone arena, so some of my questions my seem stupid. Please be kind regardless.
I've learned a lot about the iPhone by trial and error (pressing buttons to see what happens) but one thing I just discovered was the multitasking bar. When I accessed it, I saw every app I had run since I got the phone displayed in the multitasking bar. And I know that by holding the icons on the bar, you can bring up a red minus sign, touch it, and remove that app from the bar. My question is, are all of those apps displayed in the mutltasking bar constantly running in the background, and thus, draining more battery than necessary?
Secondly, on the topic of wifi. I have my phone set to automatically join known networks and ask me to join unknown networks that it detects. However, it doesn't seem to be doing that. I still have to manually go to settings and search for the network. It will automatically join my home network (for example, when I go somewhere and come home, it will switch back to my home network automatically), but it won't do this with, for example, the wifi network at McDonald's even though I did go through the setup and make that network a known network. Am I mistaken in thinking the phone should do this automatically, or do I have to search for the network every single time? Also, since I have "ask to join networks" checked, will it automatically detect nearby networks, or do I also have to manually search for those? I understand this question may be confusing, so I can try to clarify if need be.
My last question is concerning conserving the battery. I currently have both wifi and 3G active on my phone, and I have read conflicting reports of which one drains more battery. Some say to turn off 3G and keep wifi, others say vice versa. I'm at home a lot so I'm always near my home wifi network and don't need 3G for data transfer unless I'm out and about. So is it better to turn 3G off unless I leave? I'm just trying to do whatever I can to conserve battery because I've noticed that the battery drains quite rapidly.
Sorry for the long post, I just wanted totry and clear those things up. I hope you can help me. Thanks in advance.

drew081886 wrote:
I just got my iPhone 3GS about a week ago. I am very new to the whole smartphone arena, so some of my questions my seem stupid. Please be kind regardless.
I've learned a lot about the iPhone by trial and error (pressing buttons to see what happens) but one thing I just discovered was the multitasking bar. When I accessed it, I saw every app I had run since I got the phone displayed in the multitasking bar. And I know that by holding the icons on the bar, you can bring up a red minus sign, touch it, and remove that app from the bar. My question is, are all of those apps displayed in the mutltasking bar constantly running in the background, and thus, draining more battery than necessary?
Only the last 4 apps to be run are actually active and in RAM. The others are swapped out to flash memory in a saved state (i.e you should be able to resume where you left off, if the app is written to support that). They don't therefore drain battery. I close all apps down from time to time (every few days) just to keep things neat.
Secondly, on the topic of wifi. I have my phone set to automatically join known networks and ask me to join unknown networks that it detects. However, it doesn't seem to be doing that. I still have to manually go to settings and search for the network. It will automatically join my home network (for example, when I go somewhere and come home, it will switch back to my home network automatically), but it won't do this with, for example, the wifi network at McDonald's even though I did go through the setup and make that network a known network. Am I mistaken in thinking the phone should do this automatically, or do I have to search for the network every single time? Also, since I have "ask to join networks" checked, will it automatically detect nearby networks, or do I also have to manually search for those? I understand this question may be confusing, so I can try to clarify if need be.
It should automatically list new networks when (a) you're in range and (b) you try to connect to the internet (e.g. browse to a web page or check for email)
My last question is concerning conserving the battery. I currently have both wifi and 3G active on my phone, and I have read conflicting reports of which one drains more battery. Some say to turn off 3G and keep wifi, others say vice versa. I'm at home a lot so I'm always near my home wifi network and don't need 3G for data transfer unless I'm out and about. So is it better to turn 3G off unless I leave? I'm just trying to do whatever I can to conserve battery because I've noticed that the battery drains quite rapidly.
The issue is not which drains more battery, but which you need to connect to the internet. Where you have wifi access, switch off 3G, where you have 3G, switch off wifi.
Sorry for the long post, I just wanted totry and clear those things up. I hope you can help me. Thanks in advance.

Qosmio x70-A-12 - question about the usage of external monitor

Hello,
am about to buy an external monitor and I was wondering what would work with my laptop.
I want it to work as an additional surface (Not a copy of my current screen) with both screens working at the same time.
My laptop seems to have a VGA port and an HDMI port.
I have already tried through the HDMI port with an old -probablybroken- monitor but that didnt work out.
I dunno if that's due to the monitor or my laptop.
I also tried searching for VGA monitors but when I checked the specs for my laptop it didnt list that it could connect a monitor via VGA....
Anyone knows what actually would work?..
thanks in advance!

As you already said: the notebook supports the VGA (RGB) monitor out port as well as the HDMI out port.
So you can use one of the ports in order to connect the external monitor.
Nowadays the HDMI port is a standard interface which is supported by almost all external monitors and I would recommend you to use the HDMI connection. The HDMI supports digital signals and provides better picture quality.
So its your choice now to pick a good working external monitor.

Question about the usage of wsdlRuntimeLocation property in BPEL process

Hi,
I have a BPEL process P1. And then I also have a BPEL process P2. Within P2, I invoke the process P1 using P1.wsdl in the following way -
<partnerLinkBinding name="WshGetRefDataPL">
<property name="wsdlLocation">http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
</partnerLinkBinding>
Then I tried adding the following property -
<property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
Then, when I try to deploy my process P2 after adding this in my bpel.xml I keep getting the error -
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/H:/jdevhome/jdev/mywork/BPELProj/WshSendRefDataStlToOtm/WshSendRefDataStlToOtm.wsdl". The reason is The specified network name is no longer available.
Please verify the schemas defined in wsdl.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
I also tried - <property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0</property>
With this change, the process P2 gets deployed successfully, but I am running into the following runtime issue -
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>WSDLReadingError</code>
</part>
<part name="summary">
<summary>Failed to read wsdl. Failed to read wsdl at "http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0", because "WSDLException: faultCode=INVALID_WSDL: The document: http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl/1.0 is not a wsdl file or does not have a root element of "definitions" in the "http://schemas.xmlsoap.org/wsdl/" namespace or the "http://www.w3.org/2004/08/wsdl" namespace.". Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.</summary>
</part>
</remoteFault>
I have also pasted process P2's bpel.xml below.
Can you please let me know what I might be missing here?
Thanks a lot for your help.
Thanks
Ravi
<?xml version = '1.0' encoding = 'UTF-8'?>
<BPELSuitcase>
<BPELProcess id="WshSendRefDataStlToOtm" src="WshSendRefDataStlToOtm.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">WshSendRefDataStlToOtm.wsdl</property>
</partnerLinkBinding>
<partnerLinkBinding name="WshGetRefDataPL">
<property name="wsdlLocation">http://rvishnuv-PC2:9700/orabpel/default/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
<property name="wsdlRuntimeLocation">${domain_url}/WshSendLocRefDataToOtm/WshSendLocRefDataToOtm?wsdl</property>
</partnerLinkBinding>
<partnerLinkBinding name="SendRefDataToGC3PL">
<property name="wsdlLocation">GLogXML.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>

there is a nice article on this issue.
http://www.oracle.com/technology/products/ias/bpel/pdf/bpel-admin-webinar.pdf
Try another property to see if you have the same issue:
Deployment in 10.1.2, String substitution, Only have support for:
server_url
domain_url
suitcase_url
suitcase_path
bpel.xml
<BPELSuitcase>
<BPELProcess id="OrderBooking" src="OrderBooking.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="CreditRatingService">
<property name="wsdlLocation">
http://$(server_url)/orabpel/default/CreditRatingService?wsdl
</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>

Basic question about the Info.plist

I have a whole bunch of appilcations I am developing. I when I generated my certificates I got a prefix. Do I put this prefix in my Bundle Identifier field in my Info.plist file?
At present my Bundle Identifier says:
com.yourcompany.$(PRODUCT_NAME:identifier}
I imagine I change "yourcompany" to my company's name.
But where is the PRODUCT NAME:identifier coming from? Where is this defined?
It seems to take the app name as specified in the main project file.

Ah, i didn't realize that the Get Info on the project file would yield slightly different results than the Get Info on the target; they both have long lists of C++ options, etc., but at the end the target has the product name, and that is where I can edit it.
Thank goodness for the forums, the system is complex and the documentation weak.

Basic questions about CISCO IOS

Hi everybody, Jack here,
I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
Thank you all so much for reading through the wall of text:)
Jack

Jack
Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
HTH
Rick

Basic questions about Notes domino connector

Hi,
I have a very basic question about the Lotus Domino connector for OIM. We have a requirement to provision accounts into the domino mail server and while doing that also update some information directly into a separate nsf file.
I checked the documentation and it seems while configuring an IT resource, we need to give the Mail DB path, and thats the only place where it refers to it.
Could you guys please let me know if this can be done? Can I write directly to a different nsf file, which is not like provisioning to the complete mail server. So the other attributes in the IT resource may not be able to be set up as its just the file I need to provision into.
Looking forward to your response.
Thanks, M

Hello folks, please share your experience working with the lotus notes connector.
Thanks, M

Comprehensible question regarding the usage of a ccBPM in SAP PI 7.31

Hello experts,
I have got basic question about the useage of ccBPM in PI 7.31 double Stack. I haven't created any ccBPM before so the whole set up process is new for me. We are currently using several ccBPM already which where created by our colleagues.
I just have a question about the basic of work of a ccBPM and if the designed process can be realised at all.
The current process should be implemented, starting from the erp system with a trigger report (left side). All the offered function are provided by the called system (right side)
So can this whole process can be realised using ccBPM, so that after the trigger report is called the rest of the process is handled within the pi? The process checkStatus needs to be called within a loop and at the end the generated File should be stored on the file system.
Thanks in advance for clearing my thoughts on this problem guys!
regards
Christian

Hello Christian,
is this a 1-1 correlation? So you have just one sender system and one target system? It might be better then to implement the flow in your sender system and only call single interfaces on PI. While it is technically possible to do everything in PI there is no real added value to do so. BPM is most benefitial when you need to aggregate information from different sources and when the process contains decisions that lead to alternative process steps.
Regards,
Jörg

Basic questions about Network Licence

Hi,
Before buying, I have some basics questions about the network licence of Acrobat
As an example, if I buy 5 network licence for 20 users.
If the 5 licence are used or if one user is outside and can't access the licence serveur, is there still some basic features available? I mean, is there a "acrobat reader" part that still allow users to read pdf?
In the same kind of problem, if 10 users are using Acrobat just for reading pdf file and that a user now want to use acrobat to create a pdf, is there still available licence or the 5 firsts that are just reading have take the 5 licences available?
Thank you for your answers

This is a user to user forum, with the space provided by Adobe
This is not official Adobe support... I think you need to contact Adobe

Basic questions about JRE installation

I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
Firstly I have some basic question about the general installatio/deinstallation.
1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
Regarding the JRE 1.5,
I am wondering:
1 where is the registry entry written in windows?
2 how to make the JRE installation process silent?
Thanks !

Just click on this link http://mindprod.com/jgloss/registry.html.

Basic question about NR filter

Very basic question about the (perhaps oversimplified) interface of the noise reduction filter.
Does anyone know definitively whether the first "Strength" slider is a master control for the filter overall (i.e. it controls the power of all other sliders below it), or whether it only affects an individual parameter (such as what might be perceived as luminosity-based noise, rather than color noise)?
In other words, if Strength is set to zero, but Reduce Color Noise is set to 100%, does the color noise reduction effectively become zero or 100%?
Neither the Help Menu nor three of the aftermarket books I have definitively addresses this. There are further redundancies regarding this "Strength" slider when advanced mode is turned on: for instance, if Strength on the "front" panel is set to 0, but 9 on the individual channel panels, what is the effective strength?
Thanks in advance -

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Basic questions about Infocube

Hi, everyone.
I got very basic questions about infocube data handling.
With infopackage, I extracted all the data about employees from R/3.
But there were some mistakes during inputting employee data, like positions,
so I just extracted those employees data once more.
Now I have two requests in infocube, where the first one has some wrong data.
Is there any solutions about this?
I might got it all wrong, so as beginner, any suggestions and explanations will
be grateful.

Hi,
You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
Other option is to make setting in the Infopackage to delete similar or overlapping request.
Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or More Comprehensive "
Assign points if useful
Regards
Venkata Devaraj !!!

Basic question about the usage of LIKE operator

Similar Messages

Maybe you are looking for