Basic Settings in Operation Mapping

Hi Experts,
I am working on SAP PI7.1 and have some doubts regarding the options available in Operation mapping.
We need to use SAP XML Toolkit option for older versions of XSLT mappings, while for the newer versions we need not use the option. The newer version of XSLT is based on JDK 5. Now my question is how to make the XSLT mapping compatible to JDK 5? What is the procedure/ tool to be used?
I have already referred:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/8c/447891e999478f8a4394ab566bc343/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/73/f61eea1741453eb8f794e150067930/content.htm
And also some of the replies by Stefan Grube on SDN for similar questions, but still unable to know how to make XSLT compatible to JDK 5
Thanks.

Hi,
If in it case it throws some error, you may post here. I believe that such compatibility procedure won't be required all the time.
As per the guidelines older versions of XSLT mapping wont work without the mentioned option being checked.
Post PI7.1 and PI7.1 EHP1, all the XSLT mappings should be compatible with JDK5 and none of the earlier XSLT versions will work then.
So as of now we can make the Mappings work by selecting the SAP XML Toolkit option but the future versions wont have this option.
Thanks.

Similar Messages

Basic Settings for Lifecycle planning

Hello All,
I want to maintain the basic settings of Life Cycle Planning to use Like Profile
Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
I have seen the sentence below in OSS note: 354660
**If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
*Errors have been found in your Customizing settings
*For detailed information, see consulting note #354660
*The basic settings cannot be saved
*Characteristic for product 9AMATNR is not in the planning object structur
So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
Thanks in advance

While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
This is useful during release from DP to SNP also.
Hope this helps.
Thanks,
somnath

I downloaded Macfee security and parental control. The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

I downloaded Macfee security and parental control. The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

Make that four.
If you have any commercially advertised/available antivirus software installed on your Mac, completely uninstall this per the instructions on the AV developer's website.
Antivirus software can slow down the normal operation of OS X and can negatively affect OS X performance and operation.
Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac.
Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and data is too great a risk!
Search the web to learn how to correctly and properly uninstall these kinds of apps.
They all uninstall differently.

Error while executing operation mapping

Hi All,
I am getting the below the error , while executing the Operation mapping, whereas the same payload
working fine with message mapping. Please suggest.

Hi Chandra,
Please refer to mark's comment provided in below thread:
Unable to display tree view
Regards,
Akshay

Additional message mapping in the operation mapping-use

Hi Friends,
I could find the option for adding more than one message mappings in the operation mapping(Interface mapping). What is the actual purpose of it. when it is used. If there is any blogs regarding the same. refer any link for the same.
Regards
Prem

Hi Prem
Refer the blog provided by Sarvesh
What is the actual purpose of it. when it is used. If there is any blogs regarding the same
You can use more than one mapping programs for requirement where your message mapping cannot generate the desired structure you want or you want to do some transformations in a sequence for meeting your requirement.
Example: You want to generate a excel sheet as a mail attachment but you have to read a flat file. What you can do here is you can read the Flat file in a single string variable itself. Use XSLT mapping1. Now in a sequence using XSLT Map2/Java mapping program to convert to excel and send as attachment over email
Thanks
Gaurav

Basic settings tab missing from Develop module

I recently bought lightroom 4 after using the free 30 day trial, and i have no basic settings on my mac, can't find them anywhere? My tabs go from histogram to colour curve. Where are they?
Very confused..
Message title was edited by: Brett N

No need to be confused, you've probably inadvertently hidden it. The thing is that in every Module, all the individual panels in each of the left and right-hand columns can be optionally shown or hidden under user control (there are few minor exceptions such as the Navigator, but by and large this control is available throughtout Lightroom).
So to bring up the options for each column (in your case the right-hand column of the Develop Module), simply right-click (ctrl-click on Mac) on ANY of the headers that are showing in that column and you'll see a pop-up context menu like the attached screenshot. Here you can see that I've previously hidden the Basic panel, so all I need to do is click on the Basic line and it's restored. Conversely, I can use this method to hide a panel.

Interface determination : How to populate an Operation Mapping parameter

Hi experts,
I'm creating an interface determination, I have an Operation Mapping in it. This operation mapping has an inbound parameter. When Configurating this parameter I can choose between putting a constant or getting the value from a "container". Does anybody knows where this container will be? Is it possible to take the parameter from an export parameter from Integration Process(BPM)?
My interface:
BPM->IDOC
Regards
Gonzalo

Hi Stefan,
What I wanted is leaving the mapping outside the BPM, instead that I can leave it inside and the result will be the wanted. What you mean implies something similar.
I'm going to explain why, from the process dessign point of view, I want to leave the mapping outside.
1.-I send an IDOC from my ERP
2.-This IDOCs starts a BPM who, in a synchronous way, makes some updates in a DB.
3.- Functionally speaking this updates could return a 0 if OK or a -1 if NOK
4.-The BPM have to return an ACK to the ERP.
For constructing this ACK I need my original IDOC and the result of the updates (-1 or 0).
-If I put the mapping inside the BPM it will work (and that will probably be the final solution).
-But, for a better performance and dessign, I wanted to leave the mapping outside.
-I also want to know if the container in the interface determination we talked before can be used or what it means. (So let me know if you find out something about)
-The third reason is that I find interesting speak about this topics in the forum if you know what I mean :-D
Regards
Gonzalo

When i try to sync my phone, it says i should get ios5.1 but will lose my data except basic settings. How do i back it all up before getting new software if it wont let me sync? I am worried about the photos.

I have been trying to sync my phone, but it says i need to get the new software ios 5.1, but in doing this I will lose some things purchased on my phone which arent on itunes, and I should transfer them It also says something about apps and that i will only be able to store basic settings like contacts and texts. How can i back my phone up before installing this software update, and what do i do about my photos?
Thanks

Read the User's Guide... it covers how to backup and sync the device as designed.

Error in Automated activity of BPM using the PI operation mapping.

Dear Experts,
We have a BPM process, where we have imported Operation Mapping, to use it in an automated activity. We have created the service reference with localhost and checked the local provider system check box and with type WS.
While running the scenario the process stops at the automated activity (having the Operation mapping), with error:
A technical error during invocation: Could not invoke service reference name
I have tried to recreate the step couple of times but it is always the same error.
Could you please share your expertise in how to over come the error.
Thank you,
Best Regards,
Ajay

Hi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi

ABAP Class not displaying in operation mapping.

HI,
I have created abap class using se24 for throwing exception message in sxmb_moni, this abap class needs to be called in operation mapping, even though i have activated this abap class in PI environtment, i couldnt see the abap class option in the operation mapping.
Could any one please let me know any change profiles requirements are required,
Thanks,
--Sai

Hi Sai,
Yes, you do have to register ABAP Class Mapping in the Exchange Profile to see this option in the Operation Mapping. Follow these step-by-step configuration guidelines:
http://www.riyaz.net/sap/xipi-how-to-register-abap-mapping-in-exchange-profile/624/
Hope this helps,
Greg

Operation Mapping issue in PI 7.1

Hi there,
I am working on PI 7.1 sp7, and have lots of interfaces running on it.
There is something strange regarding Operation Mapping in Interface Determination, the thing is that when i try to assign a IM to the Interface Determination i could see it from the display table BUT i am not able to get it to the I.Det screen, so the mapping between sender and receiver interface is lost.
However, if i import any scenario from other XI system and navigate to the IDet, i could see the operation mapping with the IM in it.
Do you guys have ever experienced something similar? Could this be something related to caches?
FYI:
Cache notif in ESR and ID is ok (green)
SXI_CACHE is ok
CPACache is ok
Cache connectivity test is in yellow status ("Cache notification from Integration Directory not yet started or being edited")
INTEGRATION_DIRECTORY_HMI destination test throws 500 error but the response body is 'The WebApplicationException log ID is [26D8F0DDA80400560000015D000DA0E801028B1CD8907B66].
and i think it should be ReqID not found.
Could you please help me on this?
Thanks in advance and best regards,
David

Hi David
I think this error is documented in note #1286212 Binding rec0 is not found in the brick error in mapping.
The solution is as following:
(http://<server>:<port>/rep)
-> Administration.
-> Repository (tab)
-> Java Web Start Administration
-> Re-initialization
Repeat this action on the Directory tab.
Regards
Mark

Operation mapping in PI 7.1

Hi,
How is the operation mapping of PI 7.1 different from the interface mapping of PI 7.0?
Thanks,
regards,
Ramya Shenoy

Hi,
in PI7.1 you can define multiple operations in one service interface but in PI7.0 there can be only one operation in a msg interface which had the same name as the name of msg interface.......so in PI7.0 there was interface mapping but in PI7.1 since a service interface has multiple operations, so operation mapping is done for every operation defined in service interface.............
Regards,
Rajeev Gupta

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

Abap mapping and operation mapping param

Hi All,
I have a problem with retrive value of export parameter in operation mapping by abap mapping class.
standard parameter of abpa mapping class method that execute it contains param that ref to IF_MAPPING_PARAMETERS. So i belive by this class using method PARAMETERS->GET_STRING( 'P_IDOC_NR' ), but it dosen't works.
Any idea
Regards
M.

I have not seen anything in online help that gives the impression that you can use parameters in ABAP mapping.
So I suppose that this does not work at all.
Maybe you could use this approach:
/people/peter.glas3/blog/2010/09/08/pi-parameterized-xslt--a-flexible-alternative

Basic Settings in Operation Mapping

Similar Messages

Maybe you are looking for