Operation Mapping issue in PI 7.1

Hi there,
I am working on PI 7.1 sp7, and have lots of interfaces running on it.
There is something strange regarding Operation Mapping in Interface Determination, the thing is that when i try to assign a IM to the Interface Determination i could see it from the display table BUT i am not able to get it to the I.Det screen, so the mapping between sender and receiver interface is lost.
However, if i import any scenario from other XI system and navigate to the IDet, i could see the operation mapping with the IM in it.
Do you guys have ever experienced something similar? Could this be something related to caches?
FYI:
Cache notif in ESR and ID is ok (green)
SXI_CACHE is ok
CPACache is ok
Cache connectivity test is in yellow status ("Cache notification from Integration Directory not yet started or being edited")
INTEGRATION_DIRECTORY_HMI destination test throws 500 error but the response body is 'The WebApplicationException log ID is [26D8F0DDA80400560000015D000DA0E801028B1CD8907B66].
and i think it should be ReqID not found.
Could you please help me on this?
Thanks in advance and best regards,
David

Hi David
I think this error is documented in note #1286212 Binding rec0 is not found in the brick error in mapping.
The solution is as following:
(http://<server>:<port>/rep)
-> Administration.
-> Repository (tab)
-> Java Web Start Administration
-> Re-initialization
Repeat this action on the Directory tab.
Regards
Mark

Similar Messages

PI 7.1 Operation mapping - Multiple message mapping - one to many issue

Dear Experts,
I am facing this issue in PI 7.1 and I beleive i did similar one in PI 7.0 successfully.
I have an operation mapping with two message mappings.
The occurence of source message of operation mapping is 1
The occurence of target message of operation mapping is 0..unbounded
Corresponding i configured two message mappings
For message mapping-1
Source message occurence = 1 and Target message occurence = 1
For message mapping-2
Source message occurence = 1 and Target message occurence = 0...unbounded
When i test message mappings individually they are working good. But when i test it in operation mapping, the operation mapping is not working..as it is not able to convert single occurence output of message mapping -1 to the second message mapping-2.
Any suggestions?
Thanks.

The message that i get when testing in operation mapping:
Runtime Exception when executing application mapping program com/sap/xi/tf/_MM_MessageMapping_1_; Details: com.sap.aii.mappingtool.tf7.IllegalInstanceException; Cannot create target element /ns0:MT_MessageMapping_1_TargetMessageType/RECORDSET. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
My question is, has somebody mapped similar scenario in your environment? If yes, can you please provide details.
Operation mapping : 1 to 0..unbounded
Message Mapping1: 1 to 1
Message Mapping2: 1 to 0...unbounded

Soap Fault mapping issue

Hi,
I have a synchronous scenario of (request) Proxy --> XI --> SOAP and (response) SOAP --> XI --> Proxy. I am having an issue returning the application soap faults back to the sender system. When I enter invalid data while testing this webservice call with a soap client directly without XI I get a soap fault response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <soapenv:Fault>
         <faultcode>soapenv:Server.generalException</faultcode>
         <faultstring>Login failed</faultstring>
         <detail>
            <LoginFault xmlns="NAMESPACE">
               <exceptionCode>710</exceptionCode>
               <exceptionMessage>Login failed</exceptionMessage>
            </LoginFault>
            <ns1:exceptionName xmlns:ns1="http://xml.apache.org/axis/">NAMESPACE</ns1:exceptionName>
         </detail>
      </soapenv:Fault>
   </soapenv:Body>
</soapenv:Envelope>
When testing this through XI, the response message after the Soap call is returning the following soap fault in XI payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<LoginFault xmlns="NAMESPACE">
<exceptionCode>710</exceptionCode>
<exceptionMessage>Login failed</exceptionMessage>
</LoginFault>
Notice just the detail body exists in the payload instead of the soap evelope and body, which I read is stripped off within XI in the case of application errors. I have setup a fault message mapping to tie the wsdl login fault with the standard fault message type and included this in the service interfaces and operations mapping. When the soap fault happens within XI I am getting the following mapping error:
NO_MAPPINGPROGRAM_FOUND: Mapping program is not available in runtime cache:
I am expecting the fault mapping to be executed in this case but doesn't seem to be found. Any ideas why this mapping error is occuring and not being directed to my fault message mapping? Is the mapping expecting the soap envelope and body to be included in the payload?
Any suggestions would be appreciated.
Thanks,
Nate

Here are the errors I am seeing within the sxmb_moni transaction:
Call adapter exception:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 35F8008AA0A830FC93FC221572A15ABD Software Component DC6FB8300EDE11DC8E05DB6DA3E77028</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID 35F8008AA0A830FC93FC221572A15ABD Software Component DC6FB8300EDE11DC8E05DB6DA3E77028</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Response Message Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="NAMESPACE REMOVED">LoginFault</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and response message payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <LoginFault xmlns="NAMESPACE REMOVED">
<exceptionCode>710</exceptionCode>
<exceptionMessage>Login failed</exceptionMessage>
</LoginFault>

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

PI 7.1 - Operation Mapping stays blank after applying a value

Hello,
I am trying to recreate an interface that I had in XI 3.0 in my development PI 7.1 system. But every time I try to add an Operation Mapping (Interface Mapping in XI 3.0) it shows me a "value list" I select the correct mapping and then hit accept. But the operation mapping does not appear and there is no error message telling me anything.
I'm having a look at installing patch 1307777 but I'm not too confident that is the issue because although one of my mappings is a split mapping the others are not.
Any ideas?
Thanks,
Matt

Hello Matt,
I was facing the same problem. I can sugest you temporary suggestion, Like goto Interface determination - > From where you select the OM just right click on the square then select Input Help -> value list from there it will show the selected OM and you can see that in column.
PLease verify and let me know if this works or not.
Edited by: Siddhesh Pathak on Apr 13, 2009 4:45 PM

Linkage Error in Mapping and Operation mapping testing for Synchronous in NWDS

Dear Experts,
Hope you all are doing fine..
I am working in a synchronous scenario Proxy via SAP PI 7.4 to JAVA Application supporting JSON.I wrote JAVA program to convert JSON to XML and while performing test for the JAVA mapping in response structure at Operation Mapping,I am receiving following error..
LinkageError at JavaMapping.load(): Could not load class: json2xml/bin/pack/EsrJson2Xml
java.lang.NoClassDefFoundError: json2xml/bin/pack/EsrJson2Xml (wrong name: pack/EsrJson2Xml) at
java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:735)
at java.lang.ClassLoader.defineClass(ClassLoader.java:716) at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at com.sap.aii.ib.server.mapping.execution.MappingLoader.findClass(MappingLoader.java:195)
at java.lang.ClassLoader.loadClass(ClassLoader.java:372) at java.lang.ClassLoader.loadClass(ClassLoader.java:313)
I followed some of discussions for the Linkagae error http://scn.sap.com/thread/1418477 but could not help..
Following are details of my NWDS and PI server:
SAP NetWeaver Developer Studio
SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.3 SP10 PAT0000
Compiled the project with JAVA SE-1.6 as well as 1.5
SAP PO 7.4 Java Only , Release: NW731CORE_10_REL
SP: 05 JDK: jdk16 Latest Change: 353688
I have taken care to export all the Jar files used in NWDS to be exported and then imported as Archived files in PI server.
But could not see the 5 jar files in ESR. I hope there is some issue with name as can see in the log.Can the issue be solved?
How to test the Operation mapping for Synchronous Message in NWDS?
Regards
Rebecca

Dear Hareesh and Experts,
I resolved the issue by doing the below steps.
1. Downloaded the JDK5 and updated the Java console i.e. JRE 15.
2. I had created this project using the JAVA Compiler with JAVA SE1.6 initially. Changed this to 1.5 in the Properties of the Project.
3. Uploaded the project again in ESR Imported Archive.
The issue is solved.
Thanks a lot for all your inputs.

PO7.31 and BPM: Using Operation Mapping within BPM

Hello everyone!
I am facing an issue while trying the import/execute an Operation Mapping within a BPM. Have a PO 7.31SP07 installation (NWDS also on 7.31 SP07), and the process already have some working interface calls to PI, however still having issue while trying to execute the Operation Mapping:
1. After deploying the process, going to NWA -> SOA tab -> Application and Scenario Communication -> Application Communication -> select the process -> check the "localhost"/WS group for "Local System". The "Processing State" shows the error below:
Configuration for service group [localhost] failed. Error details:
[No endpoints found. Check if the service is configured and if its
endpoints are available in the . Service:
[{http://fusionconsultoria.com.br/sales_order_create}fusionconsultoria_salesord_om_SalesOrderSplit_ServicePortType]
Assigned Provider: [Local System]
Service Group: [localhost]
Service Group application: [fusionconsultoria/salesord]
Service Reference application: [fusionconsultoria/salesord]
2. During runtime, when trying to execute the OM automated step, on log viewer:
Error during SCA Processing
[EXCEPTION]
com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException:
Could not process message for operation om_SalesOrderSplit_Service in
web service plugin module.
at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:223)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException:
Configuration not found for application:
fusionconsultoria/salesord,serviceRefId:{http://www.sap.com}salesord_fusionconsultoria~salesord~BPMcomponent_29768b4e-f59a-4ba3-a2ff-dee594b01ecf_WS.
Please check the configuration details from the NWA. You may have not
assigned the Service Group to a Provider System, or the generation of
the configuration has failed.
3. Carried out the steps from the referenced links below. They are quite similar to each other, however still facing the issue:
Reuse PI Operation Mapping as a service in SAP NetWeaver BPM
Using Operation Mappings (PI) in a BPM Process - Process Orchestration - SAP Library
Using NetWeaver PI’s Mapping in NetWeaver BPM
- Marked as "local provider" and WS;
4. Tried deleting, creating the automated step aswell reimporting the Operation Mapping.
5. Already reviewed the input/output mapping of the automated activity;
6. On ESR, the mapping works correctly.
7. Tried changing the outbound and inbound Service interfaces for the OM from stateless to stateless XI3.0, as well from synchronous to asynchronous.
At this moment I've completely ran out of ideas. Appreciate if anyone could give any insights, since I am running out of time with this project!
Thanks in advance to all and
Best regards,
Lucas Santos

Hi Lucus
I'm facing the same type of problem.
Why would re-creating the BPM fix this issue ?.    I fear I would spend all this effort for nothing.
What does your operation mapping wsdl:service > soap:address look like ?   What does your NWA BPM application Communication Configuration look like now - before you had that red light - like I have now.
The WSDL that is generated from the imported Operation Mapping : what end point is expected here. My wsdl:service > soap:address location has a port of 50500 - which does not even exist!. How can it work Does this get automatically deployed onto the Service Registry?.
I have built and deployed this but I get a run time error when it executes the operation mapping.   A technical error during invocation: Could not invoke service reference name.
I have seen in the deployed BPM's Application Configuration against the Consumed Service Groups an error against the associated service group
Configuration for service
group [SG_localhost] failed. Error details: [No endpoints found. Check if the service is configured and if its endpoints are available in the . Service
It almost seems that it wants me to publish the end point on the service registry - no idea how....but I none of the blogs and post indicate that I need to fiddle with this at all.
I have this question in SDN too if you care to take a look.

JDBC Lookup with BPM (no operation mapping)

HI,
In my scenario i have to use JDBC lookup to get the data ,but here i do not have operation mapping ( this part i am doing in BPM).. to select JDBC Look up communication channel.
In BPM i am facing issue to select lookup parameters.
-->In BPM for lookup parameter its asking for container element. I have created container element but that element is not showing in the container element list to select.
JDBC look up parameter i have created using category as adapter and BPM container element as simple.
Please let me know how to resolve this, ( Is this JDBC lookup limitation!)
Thanks
Surya

Thanks Jenny and Rajendra for your reply.
Actually my question is wrong, here i am correcting this.
I have operation mapping ,but that OM is inside BPM, and i am facing the issue in selecting container element parameter in BPM.
-->In BPM for lookup parameter its asking for container element. I have created container element but that element is not showing in the container element list to select.
JDBC look up parameter i have created using category as adapter and BPM container element as simple.
Thanks
Surya
Edited by: SuryaPrakash Reddy on Aug 26, 2011 10:53 PM

Error while executing operation mapping

Hi All,
I am getting the below the error , while executing the Operation mapping, whereas the same payload
working fine with message mapping. Please suggest.

Hi Chandra,
Please refer to mark's comment provided in below thread:
Unable to display tree view
Regards,
Akshay

XSLT mapping issue in parent child relation

Hi Guys,
i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
IDoc structure is as below
<ZLOIPRO1>
<E1AFKOL>
     <A></A>
     <B></B>
     <E1RESBL>
         <MATNR>1</MATNR>
         <CHARG>1</CHARG>
         <ZSBL>
             <MTART>ABC</MTART>
         </ZSB>
     </E1RESBL>
     <E1RESBL>
         <MATNR>2</MATNR>
         <CHARG>2</CHARG>
         <ZSBL>
             <MTART>ZHA1</MTART>
         </ZSB>
     </E1RESBL>
     <E1RESBL>
         <MATNR>3</MATNR>
         <CHARG>3</CHARG>
         <ZSBL>
             <MTART>ZHA1</MTART>
         </ZSB>
     </E1RESBL>
</E1AFKOL>
</ZLOIPRO1>
As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
I hope i am clear. Please let me know if any solution for this.

Hi,
Try this
<xsl:if test="./ZSBL/MTART == 'ZHA1'">
<xsl:for-each select="./E1RESBL">
<MATNR>
   <xsl:value-of select="./MATNR"/>
</MATNR>
<BATCH>
   <xsl:value-of select="./CHARG"/>
</BATCH>
</xsl:for-each>
</xsl:if>
You might need to do some changes in the above.
Thanks,
Prakash

EA4500 – Smart Wi-Fi interface and Windows Network Map issues

I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

Credit memo and MAP issue

Hello Guru's
I have 2 issues, and i am unable to understand the system logic for the same
Issue 1:-
We have an Intercomapny scenario
sequence of transaction is as follows
1. Create Return purchase order (document type NB) - Intercompany purchase
2. Post return goods receipts - movement type 161
3. Post credit memo with respect to return purchase order
4. Cancel the movement type 161 - using 161 movement type
System allows me to cancel the document created using 161 movement type
Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
Issue 2:-
I have a strange MAP issues which is flactuating very drastically
the scenario is as follows
Store stock is 10 ea, stock value is 1000, MAP is 100
DC map is 25
When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775)
Please advise if there is any way we can control this behaviour
I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
Appreciate if you can guide me to help
Regards
Amit

Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards,

Additional message mapping in the operation mapping-use

Hi Friends,
I could find the option for adding more than one message mappings in the operation mapping(Interface mapping). What is the actual purpose of it. when it is used. If there is any blogs regarding the same. refer any link for the same.
Regards
Prem

Hi Prem
Refer the blog provided by Sarvesh
What is the actual purpose of it. when it is used. If there is any blogs regarding the same
You can use more than one mapping programs for requirement where your message mapping cannot generate the desired structure you want or you want to do some transformations in a sequence for meeting your requirement.
Example: You want to generate a excel sheet as a mail attachment but you have to read a flat file. What you can do here is you can read the Flat file in a single string variable itself. Use XSLT mapping1. Now in a sequence using XSLT Map2/Java mapping program to convert to excel and send as attachment over email
Thanks
Gaurav

Interface determination : How to populate an Operation Mapping parameter

Hi experts,
I'm creating an interface determination, I have an Operation Mapping in it. This operation mapping has an inbound parameter. When Configurating this parameter I can choose between putting a constant or getting the value from a "container". Does anybody knows where this container will be? Is it possible to take the parameter from an export parameter from Integration Process(BPM)?
My interface:
BPM->IDOC
Regards
Gonzalo

Hi Stefan,
What I wanted is leaving the mapping outside the BPM, instead that I can leave it inside and the result will be the wanted. What you mean implies something similar.
I'm going to explain why, from the process dessign point of view, I want to leave the mapping outside.
1.-I send an IDOC from my ERP
2.-This IDOCs starts a BPM who, in a synchronous way, makes some updates in a DB.
3.- Functionally speaking this updates could return a 0 if OK or a -1 if NOK
4.-The BPM have to return an ACK to the ERP.
For constructing this ACK I need my original IDOC and the result of the updates (-1 or 0).
-If I put the mapping inside the BPM it will work (and that will probably be the final solution).
-But, for a better performance and dessign, I wanted to leave the mapping outside.
-I also want to know if the container in the interface determination we talked before can be used or what it means. (So let me know if you find out something about)
-The third reason is that I find interesting speak about this topics in the forum if you know what I mean :-D
Regards
Gonzalo

Error in Automated activity of BPM using the PI operation mapping.

Dear Experts,
We have a BPM process, where we have imported Operation Mapping, to use it in an automated activity. We have created the service reference with localhost and checked the local provider system check box and with type WS.
While running the scenario the process stops at the automated activity (having the Operation mapping), with error:
A technical error during invocation: Could not invoke service reference name
I have tried to recreate the step couple of times but it is always the same error.
Could you please share your expertise in how to over come the error.
Thank you,
Best Regards,
Ajay

Hi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi

Operation Mapping issue in PI 7.1

Similar Messages

Maybe you are looking for