Basic socket question

I'm doing following in my code..
socket = new Socket("my machine's IP address", 1779)it keeps throwing me exception saying "connection refused". Do I need to make any changes on my machine so that it allows my program connect to that specific port? That port number is not used by any other application and my system is windows 2000.
Plz advice..

plz dont reply..i think i'm fool :) ..figured it out why it wasnt workiong..and no i'm not gonna say it :)

Similar Messages

Discoveryd Basic Sockets Couldn't set IP_BOUND_IF on socket fd[72] scopeID[4] errno[22] result[-1]

message loop filling system log.
Text: discoveryd Basic Sockets Couldn't set IP_BOUND_IF on socket fd[72] scopeID[4] errno[22] result[-1]
Value of fd[] does cycle
Loop prevents access to internet
Tried work-around from http://apple.stackexchange.com/questions/153080/computer-name-keeps-changing-osx -10-10-14a389
Basely has an affect.
Power-off of router stops the loop.
Powered-off for 5 (five) minutes and can access internet
Macbook Air (MBA) and iMac both experience the loop

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Basic iPhoto questions:

I have some Basic iPhoto questions before I start using the program:
- does iPhoto apply any compression or change images in any way when they
are imported?
- after images are imported, can the original source folder of images be deleted off of the mac?
- can Quicktime files exported from iPhoto be viewed on a Windows computer?
- can iPhoto handle large resolution images that might be as large as 8-15mb each? does it display them quick? are there any known file size issues?
Thanks!!!!

kat.
Is there a way to use iPhoto on a network so other users can read and possibly write to an iPhoto library on a networked mac?
iPhoto is a consumer level photo organiser, not a server. It's possible to share photos but libraries are very difficult and fraught with the danger of database corruption. Some have reported success.
Is it possible to password protect or secure certain images in the library so they can not be seen by anyone?
No. The best I can suggest there is to create a second library and store it in a secure area like a protected dmg. But remember, you can only have one library open at a time.
After photos are deleted from iPhoto, are there any remaining traces or cached files anywhere other than the trash
If you delete photos from iPhoto and empty the iPhoto trash then the pics are removed from the Finder as well. They remain as findable as any other deleted file from that point, which is, very, if the searcher in knowledgeable.
Regards
TD

Object class deployment - Basic form question

OK, I subclass calendar object from Oracle provided standard
object class. What do I need to deploy to use this form now
apart from calendar.pll and my fmx. What about the object class
from which I sub-class. Do I need to compile and deploy that
also? How will form resolve this on run time the parent object
class as I really did not copy, just sub class and we do not
deploy original class? Basic form question. Thanks.

You can set the "help" property on the field (which gives you the little "information" icon link beside the field).
You could also try adding another field of another class above or below:
<Display class='InlineAlert'/>
<Display class='ErrorMessage'/>
<Display class='HtmlPage'/>
..etc
-Rob

Adding Date/Time Field + X Number of Days - Basic Calculation Question

I am assuming this is a basic calculation question. New to Adobe LiveCycle Forms.
I have a simple form containing a table. The table appears as such:
Text
Formatted as Date/Time Fields
Header 3
Monday
user wil choose the beginning date (Date/Time) this is DateTimeField1
Tuesday
this should calculate DateTimeField1 + 1
Wednesday
this should calculate DateTimeField1 + 2
Thursday
this should calculate DateTimeField1 + 3
Friday
this should calculate DateTimeField1 + 4
Saturday
this should calculate DateTimeField1 + 5
Sunday
this should calculate DateTimeField1 + 6
Calculations are performed after the date is chosen for Monday. My mind tells me the simple calculation of DateTimeField1 + 1 is not going to work (and in fact doesn't!) as it needs to change Monday to a number first. I saw on another thread the following:
Num2Date(Date2Num(Date(DateTimeField1), "DD.MM.YYYY")+7, "DD.MM.YYYY")
Thought this was going to get me close. No cigars though!
Any quick help is greatly appreciated. And since I am new to this, details about what needs to be changed would be great too!
Thanks

Here an addition for you date field.
This FormCalc script in the exit:Event will check it the selected date is on a monday.
If not it will go the days back until the last monday.
var Selection = Date2Num($.formattedValue, DateFmt(2))
var WeekDay = Num2Date(Selection, "E")
var NewDate
if (WeekDay eq 1) then
          NewDate = Selection - 6
elseif (WeekDay eq 3) then
          NewDate = Selection - 1
elseif (WeekDay eq 4) then
          NewDate = Selection - 2
elseif (WeekDay eq 5) then
          NewDate = Selection - 3
elseif (WeekDay eq 6) then
          NewDate = Selection - 4
elseif (WeekDay eq 7) then
          NewDate = Selection - 5
else
          NewDate = Selection
endif
$ = Num2Date(NewDate, "EEE DD.MM.YYYY")
Hope this helps, too.

Basic Exporting Question

My main question is a very basic exporting question, but here is a super-condensed explanation of my big-picture goal for context:
Large (~450 MB) aiff on CD --> trim w/ Quicktime --> small (~16 MB) MP3 in iTunes
I would like to take an audio file (aiff) that is approximately 450 MB and export it from Quicktime and in doing so, reduce the file size and convert it to MP3. When I simply try to export it, it doesn't ask me about what size I want, nor does it give the option of MP3 formatting.
I have figured out how to reach my goal, but it's a mess. After I make my trims in QT, I have to:
1. select "share" instead of "export".
2. It asks me what size I want and I select small.
3. The file is then exported as a Quicktime movie into Mail and the size is reduced from 450 MB to about 20 MB.
4. I then have to "right-click" on the attachment in the email that is created,
5. save the attachment,
6. discard the email,
7. import the file into iTunes, and
8. create an MP3 in iTunes to finally arrive at my goal.
This seems like a ridiculously convoluted process to change a large aiff to a small MP3 and put it in iTunes. Any suggestions?

Thanks. I guess the basic answer to my question is that it can't be done in one or two fell swoops. The problem is that it starts on a burned disc, and I need to make edits to it before it ends up in iTunes (to be eventually used in iWeb). I was hoping to avoid juggling back and forth between iTunes and QT. I either would have to send it back to QT to do the edits after -->iTunes-->mp3, or import the large file from the CD to QT, make the edits, save changes, import large file to iTunes, convert to mp3.

Basic Socket Server Principles

Hi - new to java, programming a socket server (working-ish) but not sure if the principles I am applying are appropriate.
Basically, during the course of development I decoupled the socket server application logic from the socket server itself so that I could develop them independently. To that ends I have two abstract classes; Server and Service (posted below).from which I derive concrete subclasses (SampleServer and SampleService). The basic idea is that the server handles connections and initializes a service instance. The service obtains the client socket connection, and proceeds to read/write as needed. When the service stops (for whatever reason, error or by accomplishing a goal), the server is supposed to close connections, and wait again for another client.
Thing is, I have no idea how efficient it is, or what best practice is. Of most concern is Server.run method (questions commented). Of almost equal concern is SampleService.doService(); In my experience, the client (I've been using a flash movie) seems to rarely recieve the entire stream of numbers.before the socket closes. I'd appreciate comments / criticisms / warnings / alternatives etc..
Thanks in advance.
David
*Server.java
package davi.fol
import java.net.ServerSocket;
import java.net.Socket;
import java.io.IOException;
* @author David Foley
public abstract class Server implements Runnable
    protected Thread _thread = null;
    protected Socket _socket = null;
    protected ServerSocket _server;
    protected Service _service;
    public Server(Service service) throws IOException
        _service = service;
        _server = new ServerSocket(_service.getPort());
     * start the server
    public void start()
        if (_thread == null)
            _thread = new Thread(this, _service.getName());
        _thread.start();
        log("- Server.start()");
     * Stop the server
     * @param status - -1 error state, 0 ok
    public void stop(int status)
        try
            stopService();
        catch (Exception exception)
            // uncomment below to fail silently.
            // exception.printStackTrace();
        finally
            _thread = null;
            log("- SocketServer.stop()");
            System.exit(status);
     * Entry point for determining if a an exception can be recovered from @see Server.recoverable
     * to operate if
     * @param exception
    public void recoverOrDie(Exception exception)
        log("- Server.recoverOrDie()");
        if (!recoverable(exception))
            exception.printStackTrace();
            stop(-1);
     * Override this method to obtain an opportunity
     * to handle an exception if encountered. Default @return false
     * @param exception
     * @return
    public Boolean recoverable(Exception exception)
        return false;
    public void run()
        try
            while (_thread.isAlive()) // is this correct?
                startService(); //initialize the service, passing _socket to Service.start method
                while (_service.isRunning())
                     // don't do anything else while _service.isRunning == true
                stopService();
        catch (Exception e)
            recoverOrDie(e);
     * waits until a client connects
     * @throws java.io.IOException
    private void startService() throws IOException
        _socket = _server.accept();
         _service.start(this, _socket);
        log("- Server.openSocket()");
    private void stopService() throws IOException
        if (_socket != null)
            _socket.close();
            _socket = null;
        log("- Server.closeSocket()");
         _service.stop();
    public void log(String message)
        System.out.println(message);
}And this is the Service class...
* Service.java
* Created on 03-Nov-2007 at 18:15:22
package davi.fol;
import java.net.Socket;
import java.io.IOException;
* @author David Foley
abstract public class Service
    protected Server _server;
    protected Socket _client = null;
    protected int _port;
    protected String _name;
    protected Boolean _running = true;
     * Service decouples server logic from service logic by centralizing
     * basic server methods with an instance of server
     * @param port
     * @param name
    public Service(int port, String name)
        _port = port;
        _name = name;
     * @return the port number on which the service is opertaing
    public int getPort()
        return _port;
     * @return the name of the service
    public String getName()
        return _name;
     * default method. Override
    public void stop ()
        _running = false;
     * Called by the server when a client connects, providing the
     * service an opportunity to generate and manage its own
     * client io
     * @param server
     * @param client
     * @throws java.io.IOException
    public void start (Server server, Socket client) throws IOException
        _client = client;
        _server = server;
     * @return whetjer the service is running
   abstract public Boolean isRunning();
     * @param message
    public void log(String message)
        //System.out.println(message);
        if(_server != null)
            _server.log(message);
     * @throws java.io.IOException
    abstract public void doService() throws IOException;
}An sample service (just writes ints to client socket)
* SampleService.java
* Created on 05-Nov-2007 at 14:52:11
package davi.fol;
import java.io.OutputStream;
import java.io.IOException;
* @author onDevice
public class SampleService extends Service
    public SampleService(int port)
        super(port, "SampleService");
     * @see Service.start(Server server, Socket client)
     * writes the integers 100 to 0 inclusive to the client socket
    public void doService() throws IOException
        OutputStream out = _client.getOutputStream();
        int count = 100;
        while (count > -1)
            out.write(count);
            count--;
        out.close();
        stop();
* SampleServer.java
* Created on 05-Nov-2007 at 14:50:55
package davi.fol;
import java.io.IOException;
// just initializes an instance of SampleServer
public class SampleServer extends Server
    public SampleServer () throws IOException
        super(new SampleService(3000));
}Edited by: ondevice on Nov 5, 2007 7:31 AM

Yeah, I've also used jpcap too...same problem because it wraps around WinPCap dll just like Wireshark/Ethereal. No lucks. I even tried Windump, same deal. It seems like so many of these sniffers are built as a wrapper around WinPCap dll so that might be the limiting factor.
However, I know this this is doable because I have had lucks using:
http://www.sstinc.com/winsock.html
But this product is only limited toward Windows OS. I would like to implement this into java so I can operate my application under windows, linux, unix, and mac.
Would you have any ideas how
SSTINC built their Winsock analyzer? I'm sure there has got to be a way to work around this....
Does anyone know if there is a Unix/Linux socket shim/analyzer out there? I'll have my boss buy it if java can not answer our problem.

Few basic SRM questions .......

I recently completed the SRM training from SAP and I have few basic questions and need help. Full points will be rewarded.
These are my questions and it is based on SRM 5.0 Classic Scenario with R/3 backend
1. Invoice & confirmation transferred to R/3 via ALE ? . All other documents are transferred to R/3 via RFC?
2. Based on the configuration, if the material is available in the backend then reservation will be created. Other wise PO will be created. For text items, PR will be created.
     a. Who (purchaser) will process the PR in R/3 and how it is processed?.
     b. Who (purchaser?) will process the reservation in R/3 and how it is
         processed?. Assume no sourcing is setup in this case and No MRP run.
3. How the vendor is linked to the Material or product category in SRM?. During the vendor replication from R/3, vendor and material/prod category link is automatically maintained?
4. How the vendor is linked to a specific purchasing org/group? Is it based on the prod category assigned in the org structure for each purchasing org or purchasing group?
5. How to do delta prod category replication?
6. How to do Delta Material Replication?.
7. Contracts and vendor list:-
    In our SAP training we created these from the browser. But in the actual
    implementation how do we create this?. Is it always from the browser?
8. Direct Material and Plan driven Procurement.
   Can we use catalog items as direct material?. Just for example - > What
   about Car Batteries that is directly used in production and has the inventory
   also. But we are using electronic catalog for procuring this item. Is it possible to
   order this as direct material?
9. How to replicate Plant. How to use DNL_PLNT?. Is BBP_LOCATIONS_GET_ALL will replicate all the PLANT's and its locations from the R/3 backend?
10. In the HR system, which transaction we can view the org structure?

Hi
Answers to your questions ->
1. http://help.sap.com/saphelp_srm50/helpdata/en/e9/d0fc3729b5db48e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/74/ec7b3c91c1eb1ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/d77c3c3fd53228e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/77/e97b3c91c1eb1ee10000000a114084/frameset.htm
2. Provided the necessary role is given to the Purchaser (Buyer) in the System.
a) Yes
b) Yes
3. http://help.sap.com/saphelp_srm50/helpdata/en/e5/f5e938b4ece075e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/70/00c73a584611d6b21700508b5d5211/frameset.htm
4. http://help.sap.com/saphelp_srm50/helpdata/en/2c/867d3ca2156c6ae10000000a114084/frameset.htm
The vendor ORG has to be seperately created through trasaction PPOCV_BBP before replicating the Vendors from the R/3 System.
http://help.sap.com/saphelp_srm50/helpdata/en/70/00c73a584611d6b21700508b5d5211/frameset.htm
5. http://help.sap.com/saphelp_srm50/helpdata/en/42/d3b671ba67136fe10000000a1553f7/frameset.htm
6. http://help.sap.com/saphelp_srm50/helpdata/en/29/d586398dcfd74fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/05/9b8139437eac2ae10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f5/b4bcdac7c40c4dba53e3695d18236c/frameset.htm
7. Yes, from Browser it's quite easy and is quite user-friendly.
8.
http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
9.
You can use the following three routines to download locations from the backend system and store them as business partners in SAP Enterprise Buyer.
BBP_LOCATIONS_GET_ALL
To get all the location numbers from each backend system that is connected
BBP_LOCATIONS_GET_FROM_SYSTEM
To get all the location numbers from one particular backend system
BBP_LOCATIONS_GET_SELECTED
To get selected locations
Previously, locations were not given business partner numbers in SAP Enterprise Buyer. If you are configuring an upgrade, you can use routines BBP_LOCATIONS_GET_FROM_SYSTEM and BBP_LOCATIONS_GET_SELECTED to check that the following conversions have been made:
·        Conversion of user favorites
·        Conversion of user attributes
·        Conversion of old documents
Routine BBP_LOCATIONS_GET_ALL checks these automatically.
Once you have run the routines, the location data is available in the SAP Enterprise Buyer system. Table BBP_LOCMAP contains the mapping information (in other words, which business partner number corresponds to which location in which backend system).
For more information, see SAP Note 563180 Locations for EBP 4.0 plant replication
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/77/e97b3c91c1eb1ee10000000a114084/frameset.htm
10. PPOCA_BBP(Create) / PPOMA_BBP(Change) / PPOSA_BBP(Display).
Regards
- Atul

What is better???--sockets question

I have a server that receives one client (one thread of them) per socket.
Is it better to have all in the same socket?
where is the bottle�s neck? in the processor or in the bandwith?

ok
and what is better for my server:
1) receive each client in a different socket
2)receive all clients in one socketAFAIK you would need a new port for each server socket. How then can your clients know which port to connect too? Therefore I think (2) is the proper solution.
For a general implementation of a tcp server, have a look at my solution at http://www.ebi.ac.uk/~kirsch/monq-doc/monq/net/TcpServer.html . You can download the code by following the link at the bottom of that page. Comments/questions welcome.
Harald.

Basic swing question

I just started looking at swing yesterday because I want to provide a GUI to replace a command line utility we use. I've basically finished it but have a quick question about form - I will get some literature later but would like to get a feel from the people here. If you have a JFrame with a few JPanels each which contain some other components, what is the best practice for variable declaration? Should I just declare the variables locally or should I make them instance variables? The reason I ask is that I have a button that submits a message but that message is dependant on check boxes, etc. from from the frame. If I declare them at the method level I then have to start passing them around whereas if I declare them as instance variables I can access them very easily BUT this may not be good form.
For example:
my class is SendMessageToo so in the main method I have a line like:
final SendMessageToo smt = new SendMessageToo();
now all the instance variables that I have can be accessed my the methods simply using smt.methodOne(), etc. Does that seem OK or is it just pure crap? :-)

Thanks, that was something that crossed my mind before I just made eveything an instance variable. It was during that process that I thought, do these all need to be instance variables? Then I thought, SHOULD they all be instance variables. At that point my brain imploded so I came here. :)

Switching to mac, basic noob questions

Hi, I'm new to this. I have some xmas and bday money and i need a laptop. I have two desktop PC's (one XP and one Vista) and have had PC's all my life. I feel like switching it up and giving macs a try, it would make my purchase more fun. I've done some research and i think i want the black macbook with 2 gigs of ram. Here are some questions i need answered before going much further.
1.) I notice that every 6 months new macbook models come out. I also noticed that the last three (at least) have been very similar in hardware. Is it common that the new macbook probably coming out in the summer will be unvieled at macworld? If there is a big difference i might wait, i don't want to get the last model in a product line. Id the difference is another slight processor speed increase i won't bother waiting. As far as i know this isn't available information yet, so i'm just looking for a 'usually they do/don't' type of response.
2.) Is the apple care support really all it's cracked up to be? I'm not about to let my purchase go to waste on me, but at the same time if the support is rarely needed i might not bother. I'm a student and don't have too much money to blow if it's usually a waste. I generally like getting the warrenty for my things, i'm just looking for a more experienced opinion.
3.) Are the Apple stores in the Best Buys independent from Best Buy, or are they the same? I would like to put the 900 or so dollars i can down on this and put the rest of my best buy card to pay off over the next few months.
4.) If they're the same, does anyone know if the apple computers fall under best buy's "no interest for blank months of purchases over black?"
thanks!

Hi Thomes08!
Welcome to Apple Discussions.
It sounds like you're in the process of making an excellent decision to go with a 2.2GHz "BlackBook" and up your RAM to 2.0GB. I think you'll be extremely pleased with your purchase.
1.) Unfortunately, these forums are not designed to be used as a means of product speculation. Matter of fact, it's against the Terms of Use (of these discussion pages) to speculate on upcoming product releases. We'll have to wait the 2-weeks for Mac World to see what comes out, there's no way to have any insight into the excitement that Steve's Keynote brings to technology.
2.) I'm a big fan of AppleCare, mostly because it ensures peace of mind over the reliability of my product for the 3-years that it'll serve as my primary machine. While, I've had multiple Macs last beyond 3-years, I also typically swap it out for the "latest and greatest." Especially with a portable and your student discount. The cost of APP for a MacBook is a relatively "no brainer" especially if you consider the cost (for parts & labor) of even the most basic repairs if the machine falls out of warranty.
3. I'm not entirely familiar with the logistics of the agreement that Apple has with Best Buy, so I'd rather not speculate. I do know that Apple also offers financing options through BML (Bill Me Later) and Juniper Bank, but I'm unfamiliar with the specifics of a split payment. Buying an Apple product through Best Buy still entitles you to all the same "benefits" of ownership, so there's no advantage (or disadvantage) to shop @ Best Buy.

4 basic java questions..

ok so I already learned Java last year (in grade 11), but my teacher didn't really teach anything, we learnt everything by ourselves from the API... so theres a lot of things I actually don't understand, but for now I want to ask 4 basic questions:
1. What does static mean?
2. Why would u "final" a constant variable? ie. If you have a variable called SIZE which is set to 5, so if u want it to be a constant, just never change its value. But what does the keyword final do to it?
3. What's super? I see it sometimes, and my teacher showed us in the applet exampls to use super.paint(g) or somethign like that for the paint method, but I never use that because I noticed it works fine without it..
4. Whats a question mark? I saw a game that was made in java and it had a lot of places where it had a question mark , which was part of the syntax. For example,
int j1 = i != 0 ? i - 1 : 199;
OR
JUMPVEL = (fSuperSlime) ? 65 : 31;
I really don't understand these lines...
feel free to answer any of these questions...

wow cool...thanks.. that question mark thing is nice
saves a few lines..
now, about super, so u mean u can access the parent
class's variables?Variables, methods, constructors, if the access level is such that it's allowed.
This will be covered in any tutorial or text though.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

Basic interview questions in abap ddic

can any one pls give me the link for basic ddic interview questions

Check these threads.
need real time interview questions on data dictionary
The specified item was not found.
data dictionanry

Basic database question, and subscribe/unsubscribe code

Hi there
Although I've created and manage a website, and about a million years ago I worked with databases, I'm still a bit green and in need of some help ...
I have the website based on my local machine (laptop). I want to use a subscribe/unsubscribe for a newsletter via the website.
Before I go ahead with this, I need to clarify a very basic database issue ... would I have to always leave my laptop running in order for people to be able to subscribe to the newsletter on the website, i.e. will it still connect to the database if the laptop is not running?
I'm using Dreamweaver 3, so I hope I can use this version to connect with a database? I did install Dreamweaver 4 on one occasion with the intent of upgrading the website to it, but because I'm still a bit unsure of myself and was unfamiliar with the changes the newer version created, I decided to leave it on Dreamweaver 3 rather than risk stuffing the website up completely!
I also have Dreamweaver UltraDev but for some reason it won't install.
I'm hoping to follow instructions given on Dreamweaver Developer Centre for setting up a PHP development environment (http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html).
If anyone would be so kind as to advise whether I'm on the right track with all this, using Dreamweaver 3, that'd be great!
Also, I'm sure this is unlikely, but is there any way to include a subscribe-unsubscribe without having to actually use a database?
Many thanks in advance :-)
Cheers, Chrissie

Thanks for your help and advice - much appreciated. I'm going to go the way
of hosting, as you suggest, and save myself the heartache
Quoting jj12689 <[email protected]>:
To answer your first question, yes your laptop needs to be powered on
for users to be able to access the database and subscribe/unsubscribe.
There is another way of doing it, but it requires more work on your
part. You could make an online program that would generate SQL
statements and place them in a text document on the server. Every time a
user subscribes/unsubscribes it would add them to the end of the text
document. Then you could make an update button on a back-end admin page
that you would have to push that would take that text file, open it and
take the sql statements and submit it to the database on your computer.
I would advise against this method, since it is time consuming, and not
very fast for today's world. I would recomend using a server based
database, if the host you currently have dose not have a database, I
would recomend finding another host. I use surpasshosting.com for my
hosting because they are cheap, reliable, and have all the requirements
I need.
Â
Hope this helps...
>

Premiere Elements 7 Basic Editing Question for DV

Hello all,
I have PE7, a Q6600 quad-core, and Windows 7 64bit.
I have captured about 6 hours of Standard Definition 16:9 DV footage from my church's grand opening ceremony. Video was captured from an old Pana PV-GS320.
The church wants a dynamic video to be produced from the captured footage (60 minutes at the most in length). I plan on doing many different effects including semi-transparent video layering, picture in picture, inserting photographs, and inputing audio clips from the ceremony. The final product will be a standard definition DVD disc.
I've done some research regarding how DV is interlaced and output for DVD should be interlaced (unless I'm wrong in that conclusion, let me know). I also know that doing heavy editing with interlaced footage (slowing/speeding footage, zooming in and out, rotating, multiple layering, etc) may create flickering and "mice teeth" in the video. I've also searched through these forums and keep on running into HD questions/solutions... I guess I'm asking an old question that was probably answered long ago when DV tape ruled the world.
QUESTION 1:
So, if I may ask, in order to get the best results, should I prepare my raw footage in PE7 before editing it by (1) by deinterlacing it? (2) exporting it as progressive? (3) both? (4) leave it alone and begin editing away? or (5) am I missing another option?
QUESTION 2:
Also, what resolution would be best to import the photos into the project?
I know the best way to work with any video is to make as little changes as possible to it, but this is unavoidable in my case. No one wants to sit through 6 hours of video...
Thankyou very much for reading my questions and I really hope you have some time to answer it! Thanks for any information! I really appreciate it!
-141rockwell

Relax, rockwell. You're making it all unnecessarily complicated.
If you've captured your video as DV-AVIs over a FireWire connection, you won't get "mice teeth" in your final product. The program is designed to work with interlaced video and create interlaced DVDs. The results should look virtually as good as the original footage! You can't damage video with "excess editing."
Just trust the program to take care of the technical issues. You can concentrate on the editing.
As for any photos you want to add, you'll get the best results if they're no larger than 1000x750 pixels in size, per the FAQs to the right of the forum.
http://forums.adobe.com/thread/431851?tstart=30
Meantime, if you're looking for some basic help with the program, be sure to check out my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

Basic socket question

Similar Messages

Maybe you are looking for