Basic UDO Navigation with Userform

Hi there!
I have a problem with the basic navigation provides by udo in sap.
A userform linked to an udo object has the following basic navigation:
- Create New Record
- Search Record
- Move to First Record
- Move Back
- Move Forward
- Move to Last Record
These are the buttons you can see in the menu on top of sap.
Normaly all these buttons are activated when linking a userform to an udo.
but now i have 2 forms, where i can only add a new record and search for a record. but i can't navigate between them...
i don't know why..is there a difference between udo-types, should i add a special code line to my code or set a property of my userform?!?! like i said before, normaly this is working, but now?!
please help..
btw: the udos do also have a sap-standardform. but these aren't really necessary.
thanks
matthias

Hi,
For Navigation functionality to run in your customized form.
First of all please check whether Find option is checked in your User-Defined Object Registration screen from SAP B1.
If it is not then please checked it.
You have to place an edittext either visible or non visible in your screen and bind it with DocNum (in case of master type bind with code) of your table.
Then wite
either
objForm.DataBrowser.BrowseBy = "ID of that EditText" (in your code)
OR
<DataBrowser BrowseBy="id"/> (in xml)
Please try
regards:
Sandy

Similar Messages

Can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?

can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?
I want to work on a client's work in the windows versions of the creative suite, with occasional usage of after effects for windows, and to use some web plug-ins only available in windows versions, and to try some windows-only video and audio software.
thanks for any suggestions. While many people have told me I can run everything on my macbook, I am concerned about what I think is a limited amount of ram that can be accessed over the virtual machine partition softwares, and I don't know if what I want to attempt is actually possible.
My mbp os is 10.8.2 on a 2.5 GHz intel core i5 4 gb 1600MHz DDR3 with 500 hard drive. the basic 13" mid 2012 machine.
I'm hoping to install 16 G of opertating ram to allow more adobe programs to run concurrently- just when I am working on the mac side.
also, off track but, for years I have wanted a small machine that is more easily portable than my 15" machines. I have only had this used machine for a few weeks, but already I have been very satisfied and used it for presentations at clients. I don't want an air because I really want the dvd burner and player. No matter what apple says about wireless, there are decades of legacy work stored on optical discs all over the world, and I don't want to be unable to open something at a client's office because I don't have a dvd drive. Additionally, I have very large files I want to transfer via ethernet or firewire so that the transfer will take less time and be more secure than wifi. I resist apple's trend to make every machine a disposable toy that is viable only a year or so. I have read reviews that label the mbp it a poor value compared to the air. If all you need to do is text and communicate via wifi, many devices will sufice, and an air is certainly the most elegant. But what about the cost of large ssd's and protecting the drive against damage from shock? I want to be able to move this thing around and the small size is much safer inside my padded bag when I sit in narrow airplane seats, crowded trains and other congested spaces. I am much more likely to be able to borrow a large screen in a client's office ( with the use of one of the three adapters I had to buy) than to be able to borrow a dvd drive that has drivers for mac os 10.8.2. I suspect this may be the last generation of machines that have optical drives and ethernet, and that was why I purchased it so that I could continue to do work into the next few years. I am impressed by the retina display, but I need long battery life. And as beautiful as the retina display is, it is even more of a problem when trying to cross platform with the windows world. I wish I could infuence apple to do a trial product flow for a machine designed to work with 80% of the business world that uses windows. How spectacular that would be. With all their expertise and adept hardware design, to create a machine that cross platforms better than a windows machine itself works? Now that would be an accomplishment. Instead of 8 or 9 percent of the total computer sales, why not aim for a higher percentage? Smart devices will keep moving toward portable computers in power, anyway.

confused, bothered and bewildered wrote:
can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?...
Fusion should work on your machine and if you put 16 GB of RAM in (see http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_160 0MHz_SDRAM), Fusion can access a good portion of that. Also, in a Virtual Machine, the guest OS is presented with Fusion's video card emulation, not what's in hardware on your Mac. Of course, finding Windows 7 now that Win 8 has been released could take some doing and the Win 8 Pro upgrade price is supposed to jump to $200 the end of the month. Add that to the price of Fusion and the extra RAM and you're beginning to get into the realm of low end real PC's.
As to cross platform, I assume you're aware of BootCamp (http://support.apple.com/kb/HT1461).

Navigation with rollovers

Hi,
I have the nice task to evalute the Portal of the 9iAS v2.
We have a nice web which should be ported to the Portal.
I have there a nice Navigation Bar with rollovers.
How can I build this navigation? I can use "Page Links" from the items to build a navigation with links.
But I want to use images.
My questions:
1. Are there any build in features to do images with links - rollovers with links
and if not - how can I do this.
2. when I use Page Links I can find the right page just by name - how can I do this when
I have to enter this manually?
thanks a lot,
michael

Here's the bad news - letting a graphics application write the HTML for a production site is not a viable method. The tables produced are completely rigid and will break unexpectedly as you build your page and add content (thereby changing the 'shape' of the original layout plan). Please read this to see why that's the case -
http://www.apptools.com/rants/spans.php
The spans are what create "gaps" unexpectedly as the table tries to maintain its shape. I believe the only way to fix this is to not use that FW HTML at all.

Best approach -Tabs based ADF Tree left side navigation with Dynamic Regions with out UI Shell

Hi,
Somebody can help for the best approach to implement the following requirement.
Req: When the user select the ADF Tree left side navigation menu, each menu will open as multiple tabs(Dynamic Tabs) in right side content area with out UI Shell Template.
I completed the
Step-1: From the Model project, I can able to render ADF Tree in the using view and view links. I can get the adf tree which is having 3 menu items. Each menu item having 2 sub menu's.
I took each menu item as one(1) taskflow, each taskflow will have two(2) fragments.
Total I have 3 task flows as Menu Items and 6 fragments for sub menu's.
Step-2: My question is How do I implement Tab based the ADF tree navigation (left side area to dynamic regions in content area) through dynamic regions? Please provide the steps in view layers.

Than ks for your response.
This is working fine for ADF Tree navigation with dynamic regions if the taskflow having only one fragment. if the taskflow having more than one fragments, this will not work. The following conditions are always satisfies one page fragment of either "employees" or "departments" task flow. If the "employees" task flow have 2 page fragments, it's not work even you pass parameters through routers.
public TaskFlowId getDynamicTaskFlowId() {
if (currentTaskFlowID == null ||
currentTaskFlowID.equalsIgnoreCase(“employees”)) {
return TaskFlowId.parse(employeetaskFlowId);
if (currentTaskFlowID != null &&
currentTaskFlowID.equalsIgnoreCase(“departments”)) {
return TaskFlowId.parse(departmetaskFlowId);
return TaskFlowId.parse(employeetaskFlowId);
My question is "Same use case with Dynamic Tabs" when the user click on any adf tree node.

Using Spry Vertical Navigation with Templates-Need to indicate current page

Using Spry Vertical Navigation with the Dreamweaver templates. Using editable attributes etc., the current page mennu item does not seem to be changing. How do you indicate the. current page.

Persistent Page Indicator on Site Wide CSS Menus:
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

JTable's Cell navigation with TAB

Dear ALL
I have face one problem in JTable's cell navigation with TAB. The problem as describe bellow.
I have two columns NAME and ADDRESS. Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS column. At the end of row controll comes on first row second column that means focus on ADDRESS column's first cell.
Please give me some hints.
Thanks in advance.
Amit

Your description doesn't make any sense (to me at least) so I don't know what your problem is or what you are asking to be changed.
The normal tab order is Left to Right, Top to Bottom. So if the focus is at the top/left normal tabbing would be:
Row 0, Column 0 (name 0)
Row 0 Column 1 (address 0)
Row 1, Column0 (name 1)
Row 1, Column 1 (address 1)
Row 2, Column 0 (name 2)
Row 2, Column 1 (address 2)
Your question seems to imply that your tab from address to addreass, which doesn't make sense.
"Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS "

Any Security Problems with Navigation with Short URLs?

Hi ,
I want to use Navigation with Short URLs for my users to access the portal. But if the users give that Short URLs to other non-users , will the URL open?
I will give the role for the users only. Non-users will not have particular role.
Are these Navigation with Short URLs are safe to use?
Advise me.

Hi,
The iview have "EveryOne Role" and "Super Admin Role".
The portal will not allow any "anonymous" users, because it needs atleast "EveryOne Role" for the access.
Will this create any problem.
I think the "EveryOne Role" is there for the user, if the iview1 assigned for role1 but still in the permissions of iview1 have the "Everyonerole" , it is allowing user to access this right?
Then I need to remove the EveryOne Role from the permissions.
Regards
Kiran

Page navigation with SelectOneRadio

Is it possible to do page navigation with just selectOneRadio choice and without link or command button?
<h:form id="form1" styleClass="form">
               <h:selectOneRadio disabledClass="selectOneRadio_Disabled"
                    enabledClass="selectOneRadio_Enabled" id="radio1"
                    styleClass="selectOneRadio" layout="pageDirection"
                    value="#{Main.selectedValue}"
                    valueChangeListener="#{Main.handleRadio1ValueChange}"
                    immediate="true" onclick="submit()">
                    <f:selectItem itemValue="page1" itemLabel="page1" />
                    <f:selectItem itemValue="page2" itemLabel="page2" />
                    <f:selectItem itemValue="page3" itemLabel="page3" />
               </h:selectOneRadio>
               <br>
          </h:form>
     public String handleRadio1ValueChange(ValueChangeEvent valueChangedEvent) {
          String s = (String)valueChangedEvent.getNewValue().toString();
          return s;
And faces-config:
<navigation-rule>
          <from-view-id>/main.jsp</from-view-id>
          <navigation-case>
               <from-action>#{Main.handleRadio1ValueChange}</from-action>
               <from-outcome>page1</from-outcome>
               <to-view-id>/page1.jsp</to-view-id>
          </navigation-case>
     </navigation-rule>

I hope u figured out a solution for this post already. But, if not u can try this. It worked for me.
In the change listener method, add these few lines for redirecting the control to required page.
FacesContext facesContext = FacesContext.getCurrentInstance();
ExternalContext externalContext = facesContext.getExternalContext();
facesContext.responseComplete();
HttpServletResponse response = (HttpServletResponse) externalContext.getResponse();
try {
response.sendRedirect("abc.jspx");
} catch (Exception e) {
e.printStackTrace();
Regards, Hari.

Issues with Userforms in Excel 2013

Hi
I have some issues with Userforms and Comboboxes created in earlier versions of Excel (2010). The VBA Code get stuck when I try to use the userforms in Excel 2013.
It is either the addItem function or the Userfrom.Show function which fails.
I have Installed a old version of excel (2007) on the same computer and when I run the same code on in this version the code works perfect. I have also tried the code on several other computers and got the same answer - Does not work in 2013 but works perfect
in previous versions.
Is there a known bug in this issue??
With best regads
Joakim

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Horizontal Navigation with Dropdown Menu

Hello!
I am trying to put together a site with Horizontal navigation with items in the dropdown. I built my plan with main pages and child pages, and added my horizontal navigation on the Master page, but when I go to preview, I don't see any of my dropdown (child) pages. Is there any way to fix this? (I've attached a screenshot, hopefully this will help clarify)......

Hello,
Please click on the tiny white Arrow in the blue circle which comes up at the top right of the Menu. And there change the Menu type from Top Level pages to All pages.
Note : Child pages on the same level in Plan view are listed vertically in a Horizontal Menu.
Regards,
Sachin

Cross Site collections navigation with publishing feature enabled into sharepoint 2010??

Hi,
Is it possible to cross site collection navigation in share point 2010 with publishing feature enabled? Right now we have a site collection with all the departmental sites within it. We are trying to create separate site collection with separate content
database for each department for better management. But problem with Global navigation as OOB does not provide cross site collection navigation functionality, So looking for multiple site collections or navigation for more than one site collection under single
umbrella. i was able to get the cross site collection navigation in my development env without publishing feature enabled using below link. But problem with production environment, as all the site collections and sites are publishing feature enabled. how i
am gonna do cross site navigation with publishing feature enabled?
http://www.itsolutionbraindumps.com/2011/10/sharepoint-2010-cross-site-collection.html
Any link or suggest will be greatly appreciated !

Hi,
According to your description, my understanding is that you want to create cross site collections navigation with publishing feature enabled in SharePoint 2010.
Publishing sites (sites with publishing infrastructure) have their own navigation API, and it is much more complicated task to preserve cross-publishing sites navigation.
We need to implement our own custom navigation provider.
Please refer to the link below about the cross site collections navigation with publishing feature enabled:
http://sadomovalex.blogspot.com/2010/12/cross-site-and-cross-site-collection.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error on page when navigating with in webdynpro applications

Hi All,
I have developed 5 different webdynpro applications. I need to navigate between these webdynpro applications. I am handling the navigation with in the webdynpro applications.
The problem is after some time ( after navigating to the second or third level) when I try to click on the tabs(top level navigation), the JAVA SCRIPT ERROR is coming.
And any other tabs are not coming.
ERROR is: 'Error on page'
ERROR Description is:'Problems with the web page might prevent it from being displayed properly or functioned properly'
Any suggestions are appreciated.
Thanks & Regards,
Seshu

Hi !,
Please can you tell me what to do if you DO NOT want to destroy the source application when navigating away from it?
For example... Webdynpro App #1 calls Webdynpro App #2,
Webdynpro App #1 will always stay visible and available to the user in there toolbar in the portal. However after I click "Go" to trigger the navigation to Webdynpro App #2, then the next time I hit "Go", Webdynpro Application was destroyed out of memory I believe.

Basic Spring Interaction with WebLogic Portal

Can you please post the article "Basic Spring Interaction with WebLogic Portal" by Article by Mark Meyer and Don Davis. Actually it was posted in http://dev2dev.bea.com/pub/a/2006/09/weblogic-portal-spring.html but after the BEA's acquisition by ORACLE, this link was not active. Can some one please assist regarding the same ?

The archived dev2dev articles are suppose to be available at:
http://www.oracle.com/technology/pub/articles/dev2arch/index.html
But in a brief review of this site, I did not see this exact title. Maybe someone else knows where that one is.
There are many other spring related articles there you may find helpful as well.

How do I create a Basic CD-Rom with video content

Hopefully someone here can help me out with this...
The production company that I work for would like to be able
to produce our own simple CD-Roms. We purchased Director 11, but
all of the tutorials and help sites that I found dealt with game
development or overcomplicated topics.
I'd like to learn how to create a CD-Rom that is similar to a
basic authored DVD... a Title page with buttons that play video
content. I would also be interested in incorporating Power Point
Presentations as viewable content on the CD-Rom.
This is something that is relatively easy to do, right? I
just haven't been able to figure it out. I have a lot of experience
with Avid editing software, Photoshop, After Effects, and Encore. I
also have moderate experience with Illustrator and html coding. I
feel like this will be really easy once someone can explain it to
me.

The basics of what you are asking is pretty easy to do in
Director. To
make a menu, just import your graphics including buttons.
Create a
frame label on the timeline for each video. On each button,
add the
behaviour named 'Jump to Marker Button' (it is in the Library
under
Behaviours, Controls). Pick the appropriate label for each
button in
the resulting popup. Then import your video and place one on
each
frame. Put the 'Go Loop' behaviour on each of these frames
(in the
frame channel). That behaviour is in the Library under
Behaviours,
Navigation.
Depending upon how your movies are setup, the rest will be
different
(i.e. are the Quicktime, avi, wmv, RealVideo, etc?). But the
Library
has behaviours for a lot of them, and building custom scripts
is pretty
easy as well if you can put forth the effort to learn Lingo.
It is
actually among the easiest to learn languages in my opinion.

Basic system struggling with Standard Def MPG files

We built two news editors about 6 months ago and needed to build both computers for $1200. These were replacing two old Avid Newscutter XP systems from 2004...
Because we were shooting DVCAM on DSR-250 camera's or to .mov/.avi DV files on nNovia QC Decks on the camera's, the files were basic DV 25Mbps content in SD.
Based on the System Requirements of Adobe for Premiere CS5, I didn't feel I needed to build these as top end machines at the time.
They are as follows:
MSI Motherboard 77T-C45 http://www.newegg.com/Product/Product.aspx?Item=N82E16813130270
AMD Phenom II X2 555 Black Edition 3.2 GHz http://www.newegg.com/Product/Product.aspx?Item=N82E16819103846
Seagate Barracuda 80GB C: Boot Drive, Page File http://www.newegg.com/Product/Product.aspx?Item=N82E16822148231
Reused 1 TB Samsug 7200 rpm SATA Scratch drive from Avid system. E:\ Projects, raw files, Media cache files
Corsair XMS2 4GB (2x2GB) Dual Channel http://www.newegg.com/Product/Product.aspx?Item=N82E16820145184
PNY nVidia Quadro FX 380 256 MB 128-bit GDDR3 http://www.newegg.com/Product/Product.aspx?Item=N82E16814133274
Corsair 400W Power supply http://www.newegg.com/Product/Product.aspx?Item=N82E16817139008
Looking back at it now, and after reading a lot of posts, these systems are on the low end. Guess that is how Adobe gets more people to buy software, make it look like it will run on what you have, after you shell out the cash on the program you realize you have to upgrade hardware too..
The systems have been working great for the SD footage we needed them for. We are not going HD anytime soon as our entire studio, routers, switcher, CG, playout system, studio camera's and pretty much everything else would need updating. So I wanted editors that were more user friendly and would handle what we were working with and that is what I got. Figured in 3-5 years when HD comes along for us it will be time for entire new system on CS7 with 30 cores, 1 TB of memory and such... (More's Law)...
So new twist to the issue. We were having a lot of issues with camera's dying the last few months. It was getting hard to keep the DSR-250s working and even though I can buy them for $1000-$1500 used off of e-bay and they are in way better shape than ours, they were big, bulky and our reporters "one man band" it a lot and two of the young women are just shy of 5 foot. You should see a petite little reporter lug a huge shoulder mount camera up onto the tripod and run it when it is bigger than them.. Really funny!!
So I pushed for new camera's and found the new Sony HXR-NX5U met all our needs in that it is a Z1/Z5 style camera (smaller format) but has "NO TAPE"...Shoots to SD cards and a 4 GB class 2 gives 58 min each in SD.
It will shoot HD as AVCHD 24Mbps files and does SD as Mpeg-2 and 9 Mbps with AC3 audio. I demo'd a camera from Sony and did a lot of testing with it, I played a few clips on the CS5 systems and everything seemed ok. They did require a quick render and I think that has to do with the Mpeg-2 compression. It is about 1/4-1/2 time render so a 5 minute clip will take 1-2.5 minutes roughly to render out. Playback is ok even when not rendered but the video looks fuzzy on the CRT monitor looped off of our Firewire DSR-11 DVCAM deck. Not a big deal, they can edit and render at the end before dumping to tape.
Problem that came up today (we just started using the new camera's this week), when I went to diagnose system crashing, I found a simple news package on the timeline. Maybe 40 small clips, edited into a package, with simple edits. It was already rendered but I noticed the fan on the system was running fast which only happens if the CPU is working hard. (Front Case Fan 120mm is on the CPU fan header PWM control, CPU fan is on Northbridge fan connector non-PWM controlled) So the CPU fan (stock) is running at full speed but I used the MB temp monitoring to control the front fan so I could have a quiet system when it is not working hard.
That led me to open the task manager. I found that the CPU is running along at 94-98% for both Cores. Ram is ok as Premiere was using about 1.8GB of the 4 GB in the system. I checked the other system and it was doing the same thing.
What is odd, is premiere is just sitting there with a timeline open, mpeg-2 clips on it and me not doing anything it stays at 92% continually. I even close the project so I am out at the "new project" "Open Project" screen and no change. If I hit exit, then the CPU drops right away down to 7% and is fine. Open premiere back up into a project and CPU goes right back up. During a timeline Render it is 100%.
We are able to edit and they seem to work but it is causing the system to run Hot and is running the CPU at near max all the time. I added two more 80mm fans out the back that will help pull more hot air out.
Is my chip way to slow for mpeg? is there a setting that I must change to optimize editing mpeg-2? I am assuming it is the work to decode the video on the fly, something the DV video didn't require so much CPU for. I am not using GPU acceleration as I do not have a card that supports it even with the hack that I know of. And GPU Acc. doesn't work for DV firewire output either.
I am considering the following:
1. Buy larger aftermarket CPU cooler and overclock my chip as many say this "Black Edition" with an unlocked multiplier is a breeze to overclock up to 4 Ghz range. (but still only 2 cores)
2. Buy a replacement 4 or 6 core processor to replace it (also with the better than stock Cooler from above)
The only problem is having to spend so much money on additional hardware.
I am also going to optimize Windows 7 on these editors as I think Areo is running and other none essential things.
The big question is why is it maxing out when doing NOTHING????? Is it just trying to build that freeze frame on the screen as it is a picture between the I- frames? (i.e. not a real frame of video but one created by decoding the info of IPPBPPIPPBPPI etc.)
Any idea's/help would be great. Anyone else using this camera and the SD files? I didn't think this would be an issue as I had read post that people were editing this kind of stuff on CS3 a few years back. Can't believe it would cause a newer system so much grief..
Mark

function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}Harm Millaard wrote:
As you may have seen I posted your results. Your statement:
Looking back at it now, and after reading a lot of posts, these systems are on the low end.
is damn accurate. 8-th rank from the bottom and around 32 x slower than a fast system, out of nearly 200 systems tested. For DV that is still perfectly acceptable, but for AVCHD it is not enough.
Your problem is the same in every industry. One can increase productivity and reduce hazards or improve working conditions (like less bulky and heavy cameras), but only at a price, by investing in new technology. It makes no sense to only invest in new cameras, without also investing in new computer equipment. It would be similar to investing in new production machinery in a plant, but postponing the training required for employees to properly use that new machinery. IMO that is a typical example of 'penny-wise, pound foolish'.
When I built these systems 8 months ago, I was originally going to get CS4, then I read on the site the CS5 was just around the corner, didn't want to buy the version on it's way out so I held off. I had never been to this forum, wish I had, things might be different.... I went off of this list when deciding what we would need:
Intel® Core™2 Duo or AMD Phenom® II processor; 64-bit support required
64-bit operating system required: Microsoft® Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 or Windows® 7
2GB of RAM (4GB or more recommended)
10GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
7200 RPM hard drive for editing compressed video formats; RAID 0 for uncompressed
1280x900 display with OpenGL 2.0–compatible graphics card
Adobe-certified GPU card for GPU-accelerated performance
Adobe-certified card for capture and export to tape for SD/HD workflows
OHCI-compatible IEEE 1394 port for DV and HDV capture, export to tape, and transmit to DV device
Sound card compatible with ASIO protocol or Microsoft Windows Driver Model
DVD-ROM drive compatible with dual-layer DVDs (DVD+-R burner for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.2 software required for QuickTime features
Broadband Internet connection required for online services*
I understand competely now that these systems are too slow, Adobe's own specs are way to low. I knew I was on the low end but the problem is we built them for DV so I wasn't expecting them to do much more than that. According to Adobe, I was in the (recommended Spec, not even the minimum...) If I was wanting to attempt AVCHD right now I would start over, but the desire now is to edit .mpg clips. It seems to be able to do that but when we have a few on the timeline and they are rendered the CPU just maxes out for no reason. But I have trouble duplicating it myself...
Today I went in and there was one .mpg clip on a timeline. I checked the CPU and it was running at 98%. I closed that project, started a new one with standard DV NTSC same as the reporters. Imported the same .mpg file that was on this reporters project. I placed it on the timeline just as she had it and did some cuts and worked with it for over 5 minutes. Rendered it all and the CPU looked fine, maybe 40-50% in bursts. Playing it would cause it to go up some, stop it would go down. Could not get it to do what it was doing for her. Closed my project re-opened hers and boom CPU to 98% again.
here are some screenshots:
You can see here is where opening her project caused the spike. Then not doing anything with Premiere it just floats along the top...
Media Cache on E:\ Drive, same as the project and .mpg file. 1 TB 7200 RPM drive.
Proceses that are running, mspaint only running as that is what I did the paste of the Alt+Print Screen to grab the task manager with.

Basic UDO Navigation with Userform

Similar Messages

Maybe you are looking for