Batch add multiple watermarks to one video file?

I'm looking for a way i can batch add watermarks to a video?
But rather than add the same watermark to say, 50 videos... I want to add 50 watermarks, to the same video? So if i have 50 different watermarks and 1 video, i'll end up with 50 videos each with a unique watermark?
Is it possible to achieve this without doing it manually? in After Effects or any other Adobe software..
Thanks

Hi
The way that I would do this would be to bring all the water marks you want to use into Premiere.
Lets say they are just the watermark and nothing else (no background etc), import them all into Premiere and load each one onto the video. You would then need to go ahead and export or queue as you go, or you could make 50 timelines and queue them all and let it run out all the exports.
You should be able to re position and change opacity from premiere if you needed.
Hope this helps
I should imagine that's the quickest it will be!!

Similar Messages

Newbie trying to combine multiple clips on one video file for iDVD

I just bought my Mac and and starting to make home videos. I have 20 .mov clips I imported from my HDD camcorder into the events section on Imovie 08. I could not find a way to combine these clips on Imovie 08 into one large clip. I imported these movies to iDVD in attempt a uninterupted movie. I have not found a way to do this. All I can do is add the the clips into a chapter screen, but then each clip stops after it end. How can I combine these .mob clips in either iMovie, iDVD, or any other software program that came with a normal Mac book?

I am not familiar with iMovie 08, but I am with the HD6 version. This is the one that you will be able to download using the link provided by SDMacuser.
You can use iMovie HD6 to combine your clips into a movie that will either play straight through or stop at the end of each clip if you wish. First, import your clips into iMovie to create your new movie project. Add audio, titles, effects, etc., and, if desired, chapter markers. Chapter markers will give you the option to advance to different parts of your movie, like a scene selection menu.
From iMovie Help, *Setting Chapter Markers*:
To set chapter markers:
Move the playhead to the point at which you want to start a new chapter.
IMPORTANT: You cannot add a chapter marker to the very beginning or end of your movie. (iMovie HD automatically adds an initial chapter marker at the beginning of a movie.) It's also a good idea not to add a chapter marker within a transition, or within one second of a transition or other chapter marker. If you do so, other applications may have trouble recognizing the chapter markers.
Click the Chapters button, and then click Add Marker.
Tip: To quickly add a chapter marker, you can also choose Markers > Add Chapter Marker.
Type a chapter title next to the thumbnail that appears in the Chapters pane.
Good luck.
iMac Power PC G4 Mac OS X (10.4.11)

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

How to download data in multiple sheets of one excel file

Hello,
I want to download data in multiple sheets of one excel file ..through ole2_object.
i have created program but it is not it is not giving the desird op.
here is the code..
create object excel 'EXCEL.APPLICATION'.
call method of excel 'WORKBOOKS' = books.
call method of books 'ADD' = book1.
*****************" Here we r creating the first sheet.
if flag1 = 'X'.
    call method of book1 'WORKSHEETS' = SHEET
      EXPORTING
        #1 = 1.                           " here 1 indicating the position of sheet means first position.
    call method of sheet 'Activate'.
    set property of sheet 'Name' = 'Developments_Summary_Report'.
    perform excel_fill.
endif.
*****************" Here we r creating the second sheet.
if flag2 = 'X'.
    call method of book1 'WORKSHEETS' = SHEET
      EXPORTING
        #1 = 2.                           " here 2 indicating the position of sheet means second position.
    call method of sheet 'Activate'.
    set property of sheet 'Name' = 'BDC_Developments_Report'.
    perform excel_fill.
endif.
set property of excel 'VISIBLE' = 1.   " due to this property excel window is visible.
call method of excel 'QUIT'.
but it is generating the two different excel file ..
Thanks in advance,
Paresh.

Hi,
Copy and paste this code in your SAP
*& Report ZETA_EXCEL_DOWNLOAD_CLIPBOARD *
report zeta_excel_download_clipboard .
include ole2incl.
data: w_cell1 type ole2_object,
w_cell2 type ole2_object.
*--- Ole data Declarations
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
gs_interior type ole2_object, " Pattern
worksheet type ole2_object,
h_cell type ole2_object,
h_cell1 type ole2_object,
range type ole2_object,
h_sheet2 type ole2_object,
h_sheet3 type ole2_object,
gs_font type ole2_object,
flg_stop(1) type c.
** Internal table Declaration
data: begin of t_excel occurs 0,
vkorg(20) type c, "Sales Org
vbtyp(20) type c, "Document Category
auart(20) type c, "Document Type
ernam(20) type c, "Created By
vbeln(20) type c, "Document Number
posnr(20) type c, "Item Number
erdat(20) type c, "Created Date
vdatu(20) type c, "Header Requested Delivery Date
reqdat(20) type c, "Request date
condat(20) type c, "Confirm date
lifsk(20) type c, "Header Block
txt30(30) type c, "Order User Status Description
lifsp(20) type c, "Line Block
dispo(20) type c, "MRP Controller
dsnam(20) type c, "MRP Controller Description
vmsta(20) type c, "Material Sales Status
kunnr(20) type c, "Sold To
cname(35) type c, "Sold To Name
regio(20) type c, "State
cufd(10) type c, "CUD
bstnk(20) type c, "PO#
bsark(20) type c, "Ordering Method
matnr(20) type c, "Material
maktx(35) type c, "Material Description
t200(20) type c, "T200
vtext(20) type c, "T200 Description
matkl(20) type c, "Material Group
zzbomind(7) type c, "BOM Indicator
ostat(20) type c, "Order Status
cmgst(20) type c, "CRD
inco1(20) type c, "Incoterms
oqty(20) type c, "Order Quantity
pqty(20) type c, "Open Quantity
unit(20) type c, "UOM
onet(20) type c, "Order Value
pnet(20) type c, "Open Value
curr(20) type c, "Currency key
so_bezei like tvkbt-bezei,"Sales Office
sg_bezei like tvgrt-bezei,"Sales Group
bname(20) type c, "Ordering Party
contact(20) type c, "Contact Name
telf1(20) type c, "Contact telf1
reqqty(20) type c, "Item Request qty
reqval(20) type c, "Item Request value
conqty(20) type c, "Item Confirm qty
conval(20) type c, "Item Confirm value
zzrev(02) type c, "Revenue recognition acceptance
bezei(20) type c, "Revenue recognition text
vgbel(20) type c, "Reference Order for RETURNS
0008text(255) type c, "Internal Order Comment Text
end of t_excel.
data: t_excel_bckord like t_excel occurs 0 with header line,
t_excel_bcklog like t_excel occurs 0 with header line,
t_excel_blkord like t_excel occurs 0 with header line.
types: data1(1500) type c,
ty type table of data1.
data: it type ty with header line,
it_2 type ty with header line,
it_3 type ty with header line,
rec type sy-tfill,
deli(1) type c,
l_amt(18) type c.
data: begin of hex,
tab type x,
end of hex.
field-symbols: <fs> .
constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
* M A C R O Declaration
define ole_check_error.
if &1 ne 0.
message e001(zz) with &1.
exit.
endif.
end-of-definition.
t_excel_bckord-vkorg = 'ABC'.
t_excel_bckord-vbtyp = 'DEF'.
t_excel_bckord-auart = 'GHI'.
t_excel_bckord-ernam = 'JKL'.
t_excel_bckord-vbeln = 'MNO'.
t_excel_bckord-0008text = 'XYZ'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC1'.
t_excel_bckord-vbtyp = 'DEF1'.
t_excel_bckord-auart = 'GHI1'.
t_excel_bckord-ernam = 'JKL1'.
t_excel_bckord-vbeln = 'MNO1'.
t_excel_bckord-0008text = 'XYZ1'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC2'.
t_excel_bckord-vbtyp = 'DEF2'.
t_excel_bckord-auart = 'GHI2'.
t_excel_bckord-ernam = 'JKL2'.
t_excel_bckord-vbeln = 'MNO2'.
t_excel_bckord-0008text = 'XYZ2'.
append t_excel_bckord.
t_excel_bcklog-vkorg = 'ABC'.
t_excel_bcklog-vbtyp = 'DEF'.
t_excel_bcklog-auart = 'GHI'.
t_excel_bcklog-ernam = 'JKL'.
t_excel_bcklog-vbeln = 'MNO'.
t_excel_bcklog-0008text = 'XYZ'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC1'.
t_excel_bcklog-vbtyp = 'DEF1'.
t_excel_bcklog-auart = 'GHI1'.
t_excel_bcklog-ernam = 'JKL1'.
t_excel_bcklog-vbeln = 'MNO1'.
t_excel_bcklog-0008text = 'XYZ1'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC2'.
t_excel_bcklog-vbtyp = 'DEF2'.
t_excel_bcklog-auart = 'GHI2'.
t_excel_bcklog-ernam = 'JKL2'.
t_excel_bcklog-vbeln = 'MNO2'.
t_excel_bcklog-0008text = 'XYZ2'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC3'.
t_excel_bcklog-vbtyp = 'DEF3'..
t_excel_bcklog-auart = 'GHI3'.
t_excel_bcklog-ernam = 'JKL3'.
t_excel_bcklog-vbeln = 'MNO3'.
t_excel_bcklog-0008text = 'XYZ3'.
append t_excel_bcklog.
t_excel_blkord-vkorg = 'ABC'.
t_excel_blkord-vbtyp = 'DEF'.
t_excel_blkord-auart = 'GHI'.
t_excel_blkord-ernam = 'JKL'.
t_excel_blkord-vbeln = 'MNO'.
t_excel_blkord-0008text = 'XYZ'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC1'.
t_excel_blkord-vbtyp = 'DEF1'.
t_excel_blkord-auart = 'GHI1'.
t_excel_blkord-ernam = 'JKL1'.
t_excel_blkord-vbeln = 'MNO1'.
t_excel_blkord-0008text = 'XYZ1'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC2'.
t_excel_blkord-vbtyp = 'DEF2'.
t_excel_blkord-auart = 'GHI2'.
t_excel_blkord-ernam = 'JKL2'.
t_excel_blkord-vbeln = 'MNO2'.
t_excel_blkord-0008text = 'XYZ2'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC3'.
t_excel_blkord-vbtyp = 'DEF3'..
t_excel_blkord-auart = 'GHI3'.
t_excel_blkord-ernam = 'JKL3'.
t_excel_blkord-vbeln = 'MNO3'.
t_excel_blkord-0008text = 'XYZ3'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC4'.
t_excel_blkord-vbtyp = 'DEF4'..
t_excel_blkord-auart = 'GHI4'.
t_excel_blkord-ernam = 'JKL4'.
t_excel_blkord-vbeln = 'MNO4'.
t_excel_blkord-0008text = 'XYZ4'.
append t_excel_blkord.
loop at t_excel_bckord.
concatenate
t_excel_bckord-vkorg
t_excel_bckord-vbtyp
t_excel_bckord-auart
t_excel_bckord-ernam
t_excel_bckord-vbeln
t_excel_bckord-posnr
t_excel_bckord-erdat
t_excel_bckord-vdatu
t_excel_bckord-reqdat
t_excel_bckord-condat
t_excel_bckord-lifsk
t_excel_bckord-txt30
t_excel_bckord-lifsp
t_excel_bckord-dispo
t_excel_bckord-dsnam
t_excel_bckord-vmsta
t_excel_bckord-kunnr
t_excel_bckord-cname
t_excel_bckord-regio
t_excel_bckord-cufd
t_excel_bckord-bstnk
t_excel_bckord-bsark
t_excel_bckord-matnr
t_excel_bckord-maktx
t_excel_bckord-t200
t_excel_bckord-vtext
t_excel_bckord-matkl
t_excel_bckord-zzbomind
t_excel_bckord-ostat
t_excel_bckord-cmgst
t_excel_bckord-inco1
t_excel_bckord-oqty
t_excel_bckord-pqty
t_excel_bckord-unit
t_excel_bckord-onet
t_excel_bckord-pnet
t_excel_bckord-curr
t_excel_bckord-so_bezei
t_excel_bckord-sg_bezei
t_excel_bckord-bname
t_excel_bckord-contact
t_excel_bckord-telf1
t_excel_bckord-reqqty
t_excel_bckord-reqval
t_excel_bckord-conqty
t_excel_bckord-conval
t_excel_bckord-zzrev
t_excel_bckord-bezei
t_excel_bckord-vgbel
t_excel_bckord-0008text
into it
separated by deli.
append it.
clear it.
endloop.
loop at t_excel_bcklog.
concatenate
t_excel_bcklog-vkorg
t_excel_bcklog-vbtyp
t_excel_bcklog-auart
t_excel_bcklog-ernam
t_excel_bcklog-vbeln
t_excel_bcklog-posnr
t_excel_bcklog-erdat
t_excel_bcklog-vdatu
t_excel_bcklog-reqdat
t_excel_bcklog-condat
t_excel_bcklog-lifsk
t_excel_bcklog-txt30
t_excel_bcklog-lifsp
t_excel_bcklog-dispo
t_excel_bcklog-dsnam
t_excel_bcklog-vmsta
t_excel_bcklog-kunnr
t_excel_bcklog-cname
t_excel_bcklog-regio
t_excel_bcklog-cufd
t_excel_bcklog-bstnk
t_excel_bcklog-bsark
t_excel_bcklog-matnr
t_excel_bcklog-maktx
t_excel_bcklog-t200
t_excel_bcklog-vtext
t_excel_bcklog-matkl
t_excel_bcklog-zzbomind
t_excel_bcklog-ostat
t_excel_bcklog-cmgst
t_excel_bcklog-inco1
t_excel_bcklog-oqty
t_excel_bcklog-pqty
t_excel_bcklog-unit
t_excel_bcklog-onet
t_excel_bcklog-pnet
t_excel_bcklog-curr
t_excel_bcklog-so_bezei
t_excel_bcklog-sg_bezei
t_excel_bcklog-bname
t_excel_bcklog-contact
t_excel_bcklog-telf1
t_excel_bcklog-reqqty
t_excel_bcklog-reqval
t_excel_bcklog-conqty
t_excel_bcklog-conval
t_excel_bcklog-zzrev
t_excel_bcklog-bezei
t_excel_bcklog-vgbel
t_excel_bcklog-0008text
into it_2
separated by deli.
append it_2.
clear it_2.
endloop.
loop at t_excel_blkord.
concatenate
t_excel_blkord-vkorg
t_excel_blkord-vbtyp
t_excel_blkord-auart
t_excel_blkord-ernam
t_excel_blkord-vbeln
t_excel_blkord-posnr
t_excel_blkord-erdat
t_excel_blkord-vdatu
t_excel_blkord-reqdat
t_excel_blkord-condat
t_excel_blkord-lifsk
t_excel_blkord-txt30
t_excel_blkord-lifsp
t_excel_blkord-dispo
t_excel_blkord-dsnam
t_excel_blkord-vmsta
t_excel_blkord-kunnr
t_excel_blkord-cname
t_excel_blkord-regio
t_excel_blkord-cufd
t_excel_blkord-bstnk
t_excel_blkord-bsark
t_excel_blkord-matnr
t_excel_blkord-maktx
t_excel_blkord-t200
t_excel_blkord-vtext
t_excel_blkord-matkl
t_excel_blkord-zzbomind
t_excel_blkord-ostat
t_excel_blkord-cmgst
t_excel_blkord-inco1
t_excel_blkord-oqty
t_excel_blkord-pqty
t_excel_blkord-unit
t_excel_blkord-onet
t_excel_blkord-pnet
t_excel_blkord-curr
t_excel_blkord-so_bezei
t_excel_blkord-sg_bezei
t_excel_blkord-bname
t_excel_blkord-contact
t_excel_blkord-telf1
t_excel_blkord-reqqty
t_excel_blkord-reqval
t_excel_blkord-conqty
t_excel_blkord-conval
t_excel_blkord-zzrev
t_excel_blkord-bezei
t_excel_blkord-vgbel
t_excel_blkord-0008text
into it_3
separated by deli.
append it_3.
clear it_3.
endloop.
if h_excel-header = space or h_excel-handle = -1.
* start Excel
create object h_excel 'EXCEL.APPLICATION'.
endif.
* PERFORM err_hdl.
*--- get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
* PERFORM err_hdl.
set property of h_excel 'Visible' = 1.
* add a new workbook
call method of h_mapl 'Add' = h_map.
* PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Back Orders'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
importing
data = it[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
* PERFORM err_hdl.
* CALL METHOD OF h_excel 'QUIT'.
*GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Backlog'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_2[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
*GV_SHEET_NAME = '3rd SHEET'.
gv_sheet_name = 'Blocked Orders'.
get property of h_excel 'Sheets' = h_sheet3 .
call method of h_sheet3 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_3[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
*--- disconnect from Excel
free object h_zl.
free object h_mapl.
free object h_map.
free object h_excel.
Regards
Sudheer

Export multiple tables into one flat file

I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.

Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie

Can I add a watermark to a video with photoshop CS3 Extended

Can I add a watermark to a video with photoshop CS3 extended or Web Premium 3, and if I can how do I do it?

Import the video as a new video layer (Layer --> Video --> New layer from file), add your watermark as another layer, then export the whole shebang using File --> Export --> Render Video. Be aware though, that there are severe limitations in what formats Photoshop accepts, exports and how they are compressed, so you may wish to check out After Effects or other tools...
Mylenium

How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.

Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i scan multiple pages into one pdf file

How do I scan multiple pages into one pdf file?

That depends on your scanning software. Adobe Reader doesn't scan.

How do you add a watermark to a protected file?

How do you add a watermark to a protected file?

Hi whobrew,
Without the Document Permissions password, you won't be able to add a watermark to the PDF.
Please let us know if you have additional questions.
Best,
Sara

Add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit

How to add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit. Assume like my test data is like below:
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7
The above graph generated manually in excel. I want to generate the same using excel report generation toolkit. when I use Excel Insert Graph.vi where the input data is 2D array with numeric data but here labview converts the empty cells (eg.x -axis 1,data1- is empty) as zero and while plotting i am getting zero for empty cell values.
Can anyone please help me on how to plot the graph without adding zero for empty cells?
Thanks&Regards,
Bharathi T
TE
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7

Hi Bharathi,
The Excel Insert graph function takes in only 2d arrays as inputs. Since arrays can only have numeric values, any table with a null string is read as 0. Now to get a plot like you mentioned, you could read the table and replace blank Strings as NaN. NaN values in an array when plotted do not appear in the excel sheet. For reference I have attached a sample vi to help you understand.
Regards
Vijetha Nuthakki,
Applications Engineer
NI Systems India
Attachments:
Excel_graph_multiplot.vi ‏21 KB

Batch export of multiple clips from one video in Premiere CS4

Hello,
I'm really in a bind and hope you guys can help me out. I have about 30 hours of video in about 30 mpg files..1 hour in each video. I need to splice out small clips from each video..anywhere from 10 to 20 clips in each and send them to Media Encoder to store as video files I can then re-use. In CS3 I can do this manually one clip at a time ..set In point, Out point and then export. This however takes a very very long time....set the ins/outs, then export, then wait, then repeat..very tedious
In CS4 can i set multiple ins/outs for the entire video and then have premiere go to work and do a batch export? Or is there another way of doing this? I have about a week left to get this done and at a total of about 450 clips to export each 2-5 mins for encoding this will take forever...plase help!
Stan

It wont do exazctly what you want but.... But the batch encoding should save you some time since you can continue to work while it encodes/exports.
Do you need to make more than one output type? Like DV, WMV, FLV... for each one? If so, I suggest this workflow:
1. Open source file 1 in Source monitor set in and out, ctrl drag subclip to a folder in the project panel.
2. Repeat step 1 for any other subclips needed from source clip 1
3. When done with first source clip go into bin where you put your subclips click on them one at a time and do export/media to your lowest compressed need (like DV AVI for example); it will be added to AME queue
4. Repeat step 3 for all subclips, then click start queue.
5. While AME is exporting all the subclips for your first source clip, repeat steps 1-3 on source clip 2...
When you are all done; if you need to make multiple output types for each file; Do (IN AME) File>New>Watch Folder
Create a Watch folder for each output type you want. Then simply copy all the exported clips you want inot each of these folders and AME will process them all for you in batch.
It doesnt do exactly what you wished for; but should save you a few buckets of time.
Curt Wrigley

Make a simple "cut" edit in a singular video in CS6 (one video file as opposed to multiple clips).

I want to be able to do simple editing in CS6. I just spent three hours watching tutorial videos and reading help articles and this forum. I have never used an Adobe video editing program before. I normally use Windows Movie Maker, but it's too simple for my current needs. (Eventually I will learn effects.)
My problem is that the tutorial videos show examples where there is more than one "clip" being placed on the timeline. That seems to pre-set editing points. I only need to import one longer video file and then cut out frames that I no longer want in the video.
I have figured out how to set start and end points on the clip, as in at the actual beginning and actual end. But following every single method described (JKL, etc), I still cannot seem to edit frames out of the middle of my videos. I assume this is because I'm missing some very simple method for setting edit points. This is what I need to know.
I am an extreme novice with this program though I'm somewhat computer savvy. So please no jargon. I know nothing of this program. I did all I could to find my own answers before asking here, but if this is answered somewhere else, please direct me there. Thanks.

I'm in a similar boat -- editing family video recorded on Hi8 and captured into DV with a Canopus ADVC-300. I typically have a 2 hour clip in the timeline. I'm separating these into clips with the razor tool, but sometimes I want to remove a garbled few seconds from within a clip.
Today I discovered something nifty: in Keyboard options, there are two items that don't have a key assigned:
Application->Ripple Delete->Ripple Trim Next Edit to Playhead
Application->Ripple Delete->Ripple Trim Previous Edit to Playhead
I assigned these to the Shift+] and Shift+[ keys. Premiere didn't warn me about these keys being assigned already, so I guess it's ok. At first, I used '}' and '{' but I'm afraid that it is too easy to accidently hit them.
When I play back in the timeline, at the start of the garbled area I want to remove, I hit Ctrl+K to add an edit point (the "out point", I suppose). Then I continue playing. When I reach where I want the video to resume, I just press Shift+[ and Premiere ripple-deletes to the edit point.
This does leave me with an edit point, though. I have yet to figure out how to splice the two clips together again.
I'm sure the pros won't like this, but I find it makes things easier.

Export one video file to multiple parts

I have PPro CS5 and I have a gameplay video I recorded that is 60 mins long. Is there any way to simply split this video into 6x 10min clips the export process or anywhere else for that matter (kind of like what Twitch.tv does when exporting to youtube), or does this need to be done manually?
System Specs
i7 860 @ Stock
8GB DDR3 1333
Evga GTX470 1280mb
Tons of storage
Windows 8.1 x64

Hi,
Configure one Sender File Communication and n Receiver Communication channel for n receivers.
Also u need to have....
1. n Receiver aggrement.
2. n Interface determination
3. 1 Receiver determination.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

Using FCP server to batch export multiple sequences from a FCP file

Hi... I am researching to see if FCP Server will be useful for our work flow.
We are creating multiple sequences in one FCP project file, and I want to be able to drop that .fcp project file into a folder and have a "watch and respond" action on the folder that takes all the sequences in that project file and applies a compressor preset to each sequence inside the project file without me having to open the file and select all sequences and batch them through compressor manually.
If this is possible then FCPS is going to save us a lot of man hours... does anyone know from experience if this is possible? I know you can take a QT file and do this, but I am not sure if you can do this with a project file!
Thank you
Barry

We work with FCP projects that have 7 - 10 sequences. When the day is done we do a quick export current settings and drag them into the production that contains the fcp project. W also flag them "ready for review" and "send to the web app". Works great for me and costs about 2 minutes. Just about the time it takes to put on your coat and say goodbye to everybody in our little editshop.

Scanning multiple pages to one PDF file on HP PHotosmart 6525 printer

I tried the solution but there was no box near preview so I could change DPI to 300. Tried to scan 2 documents, no save button either. Help?

Hi nancynurse,
Welcome to the HP Support Forums! I see you are interested in scanning multiple pages to one single PDF file and be able to change the dpi settings. To better assist you can you please leave me with the following information:
1. What is the current Operating system you are running, Windows or Mac and which version?
2. Which solution was it that you tried with no success?
3. How are you scanning, with or without the HP Software?
I hope to hear from you soon so we can begin troubleshooting!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Batch add multiple watermarks to one video file?

Similar Messages

Maybe you are looking for