Batch classification characteristics(CTBW)

Dear gurus,
I am trying to create a CL Datasource for Batch class(class type -022).I am not sure which " Basis Datasource" and which "Object Table" i should input in CTBW ??Can someone taketime to shed some light on this.
manythanks
arun

try an F4 on the table field... it gives you some options (it'll depend how batches are setup in your R/3 system... most likely you'll need table MCHA)
basic DataSource... I would assume you like to add this data to 0MATERIAL (so 0MATERIAL_ATTR)?

Similar Messages

Need a bapi r fn module to update the batch classification in the bom

hi,
iam working a exit : exit_saplcoml_001.This exit is for material quantity calculation.the materials are currently classified in the material master under the classification tab.Ans due to this the classification becomes cross plant.
To make the material classification plant specific i have decided to maintain the classification in the batch classification of bom.i am finding for a function module r a bapi to update the calculated values in to the batch classification characteristics.please help mi with this.
thanks.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

"How to pass classification characteristics while creating batch" ?

Hi,
    I am using FM's BAPI_BATCH_CREATE/CHANGE while creating/changing batch I have to maintain classification data aswell.But in FM docu i saw as shown below
1.Create the classification of a batch in the background (object characteristics only)
2. If the batch is to be classified, you must specify a class in the BatchControlFields parameter. Only single classification is possible.
According to above statments I have passed class name in Batch Control Fields but I am unable to find " How to pass classification characteristics while creating batch". Please tell me how to pass classification characteristics in background?
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
           allocvaluesnumnew, allocvaluesnumnew[],
           return.
    objectkeytable-key_field = 'MATNR'.
    objectkeytable-value_int = matnr.
    APPEND objectkeytable.
    objectkeytable-key_field = 'CHARG'.
    objectkeytable-value_int = charg.
    APPEND objectkeytable.
* Only if Batch management is Plant dependant
    objectkeytable-key_field = 'WERKS'.
    objectkeytable-value_int = werks.
    APPEND objectkeytable.
    CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
      EXPORTING
        objecttable    = objecttable
      IMPORTING
        objectkey_conc = objectkey
      TABLES
        objectkeytable = objectkeytable
        return         = return.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from ="characteristic value goes here".
    APPEND allocvaluesnumnew.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from = "characteristic value goes here".
    APPEND allocvaluesnumnew.
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
      EXPORTING
        objectkey                = objectkey
        objecttable              = 'MCHA' " MCH1 in case of cross-plant batch management
        classnum                 = classnum " Classification class number, as used in MSC2N
        classtype                = classtype " Classification class type, as used in MSC2N
*   STATUS                   = '1'
*   STANDARDCLASS            = STANDARDCLASS
*   CHANGENUMBER             = CHANGENUMBER
*   KEYDATE                  = SY-DATUM
*   NO_DEFAULT_VALUES        = ' '
* IMPORTING
*   CLASSIF_STATUS           = CLASSIF_STATUS
      TABLES
        allocvaluesnumnew        = allocvaluesnumnew
        allocvaluescharnew       = allocvaluescharnew
        allocvaluescurrnew       = allocvaluescurrnew
        return                   = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed

Automatic batch classification with procedure on goods receipt does not wor

Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.

Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Want to find out how a batch classification is used

Hello
I have previously sent out a message and the idea given was not very helpful.
Anyway, this is my question:
I have found a class and its characteristic which was setup in the system and I would like to know how this classification` is being use in the system.
For example, I would like to know which process (i.e. during goods receipt, during sales order creation, during production, during warehouse) is using this classification to perform their transaction.
Do you know how to find out this kind of information in the SAP system?
Thanks
Tuff

Do you want to know how the batch classification is used in general in SAP or how it is used in the system where you found it?
In the latter case make an interview with the users, any process that has to do with stock can make use of the batch classification
In general is classification exact what the word "classification" means. You describe something in more detail in an organized way. Classification is a modification free way to add own "fields" to standard objects, the user can immediately search in classification without an extra effort to develop a search help.
The batch classification can be used in a batch determination to to enable SAP to automatically search for batches with certain characteristics.and assign them to documents like sales order, delivery, goods movements, transfer orders, and production/process orders.

Batch classification class and MBC3

Hi,
I am a bit confused with the batch determination (i.e. how the R/3 searches the correct batch). Kindly please correct me on the following steps.
1 u2013 Base on OMCG setup, R/3 pulls the batch search procedure base on the movement type in IM.
2 u2013 R/3 searches through the strategy types listed in the search procedure to search for a search strategy.
QUESTION:
Letu2019s say there is this strategy condition type consist of access sequence and a class (to be used in batch classification)
I am a bit confused here when come to the relationship between the classification and the access sequence. How does the R/3 find the correct batch when the R/3 can uses the characteristics from the selection class of the search strategy to look for batches with suitable specifications, in that case does the R/3 still have to access sequence to find the batch again in MBC3?
If R/3 can find the batch through the batch determination from the classification, what is the MBC3 use for? I am confuse here because unlike batch determination, the pricing determination can just go find the right price value for a condition type base on the access sequence and later grab it in MEK3.
The batch classification and MBC3 confused me? Are they both finding the same batch object or redundant to one another? Please explain with an example.
rgd.
Tuff

Hi Jurgen,
So, can you tell me which of the following sequence correct base on what you said.
1 u2013
Movement Type >> Batch Search Procedure >> Strategy Condition Type >> Batch Classification found the batch >> Go to batch condition table (i.e. base on the Access sequence in the strategy type) and get the final batch?
2 u2013
Movement Type >> Batch Search Procedure >> Strategy Condition Type >> Go to batch condition table (i.e. base on the Access sequence in the strategy type) and get the batch >> Go to Batch Classification found the final batch?
Which of the above is correct? And it seems my wording explanation is not quite correctu2026. Am I?
Thanks
Tuff

Batch Classification Screen for Goods Movements

SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
Vincent

Dear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
    pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
    system create it during confirmation and at this time you will be
    able to classify your new batch from the Goods Movement screen
    COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine

Batch classification during GR against production order using txn MIGO

Hello All
       I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & it all goes well, I can also view the stock with batch no and the classifcation value when the GR is being done with txn MB1.
      But when am dong the same thing i.e. GR against production order using txn MIGO system doesnt navigates to classification screen for characterstic value entry and am able to do the posting. I want that system must navigate to classification screen automatically if i do the GR using MIGO also as it doen in the case of txn MB31.
       Please suggest what settings are to be done for the same, I am unable to figure out why the system is behaving in this manner. Kindly provide your inputs to sort out this issue. Waiting for your valuable inputs.
Regards,
J K Tharwani

Dear,
did u refer SAP Note 519303 ?
After keeping Batch Classification as 4 in OMCV, in MIGO, it will start showing the Batch Classification button under "Batch" Tab, it will not show the Batch Classification Pop-up automatically as it shows in case of MB31.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Please refer this also,
[MIGO|Re: How can I get the MRP history?]
Regards,
R.Brahmankar

BADi/UserExit for MIGO : To popup batch classification screen auto

Hi all,
I want to pop up batch classification screen automatically in MIGO when performing a goods movement . In MIGO there is a command button for that to open up the batch classification screen, but my requirement is when click CHECK or SAVE button, branch it to batch classification screen if those characteristics are not maintained.
Please reply .
Thanks and Best regards,
Sandun

HI ,
Chk BADI using these steps..
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.

User Exit for batch classification for tcode mb1c

HI experts,
I have implement customer exit MBCFC004 EXIT_SAPMM07M_004 and CLFM0002 EXIT_SAPLCLFM_002 to set a value for
a customize characteristics.
Now I have a issue.
MBCFC004 EXIT_SAPMM07M_004 can work with migo but when I with mb1c to do same transaction it didn't
work.
CLFM0002 EXIT_SAPLCLFM_002 only work when I input a value in the customize characteristics it can change the input value.
I have set extension in OMCV for my move type. and assigned the bath to material.
I have reference
Re: User Exit for batch classification
but I haven't found any question for my solution.
please help me.
thanks a lot.

Class ZBATCH has status 1 (= 'Released') but the customizing of classtype 023 doesn't allow to classify with classes of this status. Settingsfor class status in class type 023 are different from what SAP delivers.Correct please these settings. You may lookup the correct definition of
the class status in class type 022.

Batch Classification for Auto GR during Production Order Confirmation

Dear All,
I have a scenario,where Auto GR has been activated in last operation of an order.Material is batch managed with certain characteristics.When I use CO11n, and go to goods movement tab,batch for 101 movement type is entered but Batch classification pop up doesn't come.For that we need to select the line item,goto extras and create batch,then Pop up for batch classification comes.But,if we do GR with MIGO & MB31, This classification screen automatically in Co11n. i have tried certain exits also, but nothing works.

Hi Stuti<
Refer the below links it will solve the issue.
[Batch Determination - help|http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm]
[SDN Thread-1|Re: Batch Determination issue -reg]
[SDN Thread-2|Batch Determination;
Regards,
Shyamal

Batch Classification for Finished Goods

Hi,
Can anybody explain me the significance of maintaining batch classification data for a finished material?
Currently we have batch management active for all the finished materials but for some materials we have not maintained the classification data.
When I checked the batch data in MMBE it shows me the Production date & Shelf life expiration date based on the values maintained in the material master.
The class type is maintained at the plant level as 022 with characteristics as Last Goods Receipt & Shelf Life Expiration date.
I want to know what impact will be on the distribution of these materials if I do not maintain the classification data?
Thanks & Regards,
Abhijit

Hi Ravi & Lakshman,
Thanks a lot for the response. I understand what batch classification is & how it is implemented to use in coordination with Batch Determination. What I would like to know is what if the batch search strategy & class type (022) is defined at the plant level and batch management for a finished material is active but classification data is not maintained. GR (101) for this finished material is possible but does this mean that not having classification data will not have any impact on the goods movement of this material?
In case of production when the classification data is not maintained for a back flushed material (raw / semifinish), after the process order confirmation the 261 movements end up in COGI with reason Enter Batch. Since the selection criteria fails due to the unavailability of classification data; the batch needs to be selected manually instead of the system picking up the correct batch automatically.
Like in inventory (consumption of raw & semifinish) do we have batch determination & search strategy for distribution where the finished stock will be picked up for the sales orders based on the selection criteria & sorting rule?
Thanks & regards,
Abhijit
Edited by: Abhijeet K. Nerurkar on Feb 14, 2011 2:18 AM

Batch classification in foreground

Hi friends,
I would like to do batch classification in the foreground at the time of goods receipt in CO11N.
I have done the below mentioned settings in configuration but still the pop is not coming to enter the class characteristics.
1. Batch classification always in foreground in the movement type settings for 101
2. batch classification always in foreground for production order.
3. batch classification always in foreground in production scheduling profile.
Please assist me..
Regards,
Yogesh.

Hello yogesh,
Normaly we use batch determination at delivery level, because at the time of order material may or may not be created.for this material should be configured with batch and batch determination should be checked in sales views of material.
Batch Determination during order Creation.
For this you need to maintain a Classes d for you Material. Depending on the Manufacturing process you can define the characteristics for your material.
The link is self explanatory.
[Batch Determination|http://help.sap.com/saphelp_46c/helpdata/en/25/283aac4f7811d18a150000e816ae6e/frameset.htm]
Regards,
R.Brahmankar

MIGO - how check batch classification.

Hi all,
When using the transaction Migo (create), the user can enter a certain characteristic through -> batch -> classification for each position. I have to check that the input code is not already used in another posizion.
I found the Badi CACL_VALUE_CHANGE, but at this point I have only the characteristic of a single position.
Does anybody know the internal table which stores the characteristics and at what point can I go to check them?
I also found these internal tables IZH, AMM and ZM, but at the time of final check, they are not available.
I thank you in advance

Hi,
You can get the characteristic values from the standad table AUSP , and table CHVW.
Thanks and Regards,
Narayani

Batch classification characteristics(CTBW)

Similar Messages

Maybe you are looking for