Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Similar Messages

Batch input session is not generating In BRS

Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
Ratnam

Hi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar

Batch Input file is not created for the program RFUMSV00 (VAT)

Dear All,
Yesterday we run the program RFUMSV00 for posting VAT entries. But program dosnt created any batch input file. We tried to create the file once again by running the program, but there were no data;s on it.
I can able to view the spool which is created in SM37. It is in the finished status.
Can you please advice, do I need to delete any table entry for this like BSET etc....or how I can create the batch file again by ruuning the program. I dont want to post manually through FB41 transaction.
Is there any Standard SAP solution for this.
Please let me know anybody need any clarification about this question.
Thanks in advance.
Regards,
Raja.A
Edited by: Raja.A on Dec 1, 2009 12:47 PM

Hi,
Check the status of the batch in SM35 transaction.
if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
To Release -Shift+F4.
Also you can analyse the job status through F2 button.
Bye

Creation of Batch Input for transaction C201

Hello,
Currently I am having a requirement to create a batch input session for tcode C201.
Following steps we need to perform using batch input session:
1. Go to tcode C201 and enter material and Plant.
2. Then click on choose template and give Mater Recipe option.
3. On next screen enter Recipe Group and Recipe.
4. After that it will go to Copy Master Recipe screen and then giving status it will open other tabs like Operations, Materials etc.
Now when I create recording, till step 3 it is continuing correctly. but when press enter after step 3 it goes to Create Mater Recipe instead of Copy..
I got one SAP note 142022 but dont know how to implement this in my case.
Can you please help me?
Thanks and Regards
Nishad

As [Note 142022 - Batch input and CATT in recipe|https://service.sap.com/sap/support/notes/142022] explain, you have to add one step in your batch input with BDC_OKCODE "=TOFF" on the first dynpro so C201 will always use old screens which are batch-input compatible. (First check [Note 365051 - OK code TON does not work when creating recipes|https://service.sap.com/sap/support/notes/365051] is implemented on your system)
SAPLCPDI 4000
BDC_CURSOR RC271-PLNNR
BDC_OKCODE =TOFF
Regards,
Raymond

Batch Input for user defined fields (SRM 4.0)

Hello.
Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
How do I scroll in SRM?(What's the command to scroll in SRM)
Regards
Ogiwara

better lock the user since he may some business documnt open and you can not proceed further.
br
muthu

FLB2 - Lockbox Screen Error: "No Batch Input for screen SAPDF05X 3100"

I'm not familiar with Lockbox processing ... was asked to help debug an error & not having much luck doing so.
When processing a file via FLB2, we have one customer for which the postings work fine. For another customer, however, we get an error:
"Accounts receivable posting Error: (00 344) No batch input data for screen SAPDF05X 3100."
I've checked multiple Notes & postings on SDN, still at a loss and getting no closer troubleshooting within the system.
Can anyone offer ideas of what to check?
Thanks,
John

Hi,
I believe the problem should be in the input file. There should an error in the file. Can you create a one line item file for the Customer and processs it. If the Lockbox is working for one Customer it should work for all Customers. Secondly, check whether Lockbox is maintained for the Customer in the master data.
Thanks
Murali.

Batch Input for VA31 and adding new partner

Dear All,
I have a already well running program, which is creating new scheduling agreement via transaction VA31 in batch input mode.
Now, there is a new requirement to add one partner in the header. I made a recording and saw that there is a subcreen SAPLV09C. I extended the program, but doesn't matter I'm doing I always get the message:
No batch input data for screen SAPMV45A 4002
Does anyone has experience with adding new partners in the header and can explain me how to make the right development.
Thanks in advance.
Klaus

Hi Klaus,
If you get the error No Batch input data for screen proceed as follows:
1. In the Installation Assistant mark the foreground checkbox (in the column FG of the Installation Assistant project view) of this specific eCATT.
2. Activate the project again.
3. Run the eCATT in foreground
seee this links
ftp://ftp.software.ibm.com/software/websphere/integration/wbiadapters/library/doc/pdf/mysap4/mysap4_60.pdf
www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm - 9k -
thanks
karthik
reward me if usefull

Batch-input for exporting cost calculation to a local file (ecc 6.0)

Hi,
we had a batch-input to export some data in a local file (excel format) in SAP 4.5B.
We recorded transaction CK11 for a material number, we got Itemization screen and then we recorded menu' option "List . Export . Local file / Spreadsheet). If the batch-input ran in foreground it would produce required outputs (some excel files).
Now we are migrating from 4.5B version to Ecc6.0; we recorded same transaction (both ck11 and ck11n, to be more ), but at execution time the window for local file saving never is displayed and B.I. stops with error.
One difference is that now data are collected into a container, instead that in a write list ...

Hi again,
the data i look for is a result of calculation of different tables so for every single product, it is calculated. In standart CO reports, there is no such report that give me that detail.
Finally i managed to call print OK code, but it was in the foreground processing mode, i cannot run it on backround processing..
I know i misuse the LSMW, but i think LSMW may have such flexibility to use such reports, thanks to SAP.. it was an adhoc report i tried to combine, so writing a program may be much more time consuming.

LSMW: Batch Input for modified XD01?

Hey!
I want to import some customers data via LSMW, however we are using an add-on in our R3. For this reason I recieved the message: 'Old data BKNA1 cannot be processed, ADD-ON exists', when I tried to create the batch input session. All the steps before were fine. The modification of xd01 is just one button to add some additional information. Do I have to record the whole batch input session on my own again or does anyone knows an other opportunity?
kind regards

Guess you need an end of record marker in field SENDE (BKNA1):
End of record marker:
If a batch input structure is later extended, the new end of the structure is indicated by a special field (SENDE). If you are already
working with the new, extended structure, you must also supply this
field with the NODATA indicator when "initializing" the structure. As a
result, the system can recognize whether the data is based on the old or
the new structure when the structure is imported.
Old structures can no longer be processed and the system terminates with
an error message if the following prerequisites are fulfilled:
o   You are using the modification-free enhancement of the customer/vendor master either directly or indirectly via an SAP solution.
o   Either you or an SAP solution extends the structure.

No Batch Input for Screen 0300

Hello
I am doing an inter-company asset transfer using ABT1(Call Transaction).
However for few assets its giving me the error as 'No Batch input found for screen' '0300' even though
the message type in MESSTAB table is 'S'.And one I run the program again for same asset it works   properly.
    PERFORM 450_DYNPRO USING:
               'X' 'SAPLAMDP_OLD' '0100',
               ' ' 'RAIFP1-BLDAT' L_SYDATE,          " Document Date
               ' ' 'RAIFP1-BLART' 'AA',              " Document Type
               ' ' 'RAIFP1-BUDAT' L_PSTDAT,          " Posting Date
               ' ' 'RAIFP1-TRAVA' P_VAR,             " Transfer Variant
               ' ' 'RAIFP1-BZDAT' L_BZDAT,           " Asset Value Date
Posting Specifications
               ' ' 'RAIFP2-BUKRS' PWA_ASSET-BUKRS,    " From Company
               ' ' 'RAIFP2-ANLN1' PWA_ASSET-ANLN1,    " Asset
               ' ' 'RAIFP2-ANLN2' '0000',             " Sub Asset No
To
            ' ' 'RAIFP3-BUKRS' P_BUKRTO,              " To Company from i/p screen
               ' ' 'RAIFP3-XNANL' 'X',                " New Asset
Revenue
               ' ' 'RAIFP2-XERBW' 'X',                " NBV from area button
               ' ' 'RAIFP2-AFABE' '01',               " Default 01
               ' ' 'BDC_OKCODE' '/00',                " Enter
*Second Screen
               'X' 'SAPLAIST'    '2110',
               ' ' 'ANLZ-KOSTL' P_KOSTL,        " Cost Center
               ' ' 'BDC_OKCODE' '=DETA'.         " Push additional data
Enter allocations tab Common for ABT1 and AS11 transaction
    PERFORM 450_DYNPRO USING:
      'X' 'SAPLAIST'    '1000',
      ' ' 'BDC_OKCODE' '=TAB03',          " Go to Allocations tab
      'X' 'SAPLAIST'    '1000',
      ' ' 'ANLA-GDLGRP' P_GDLGRP,          " Enter value for eval. Grp 5
      ' ' 'BDC_OKCODE' '=TAB08'.
In the screen create
    PERFORM 450_DYNPRO USING:
      'X' 'SAPLAIST'    '1000',
      ' ' 'BDC_OKCODE' '=RW'.              " Go back to Second screen
    PERFORM 450_DYNPRO USING:
      'X' 'SAPLAIST'    '2110',
      ' ' 'BDC_OKCODE' '=CREA',            " Create the transaction
   'X' 'SAPMSSY0'    '0120',
   ' ' 'BDC_OKCODE' '=&ONT',
Save the transaction
      'X' 'SAPLAMDP_OLD' '0100',
      ' ' 'BDC_OKCODE' '=SAVE'.
Could anyone pls help in knowing me whats the problem?
Thanks and Regards

I think U need to handle screen 0300 .. and need to pass
data ('No Batch input found for screen' '0300' )

Batch input for BAPI_GOODSMVT_CREATE - Transfer posting

Hi all,
I'm now trying to do a batch input in this program for transfer posting of stocks.
Am i able to upload the input through an external source for example, Excel spreadsheet?
May i know how do i indicate in the program the source of my batch input?

Hello Calibertto,
You can upload excel file for batch input or bapi.
Firstly : Upload to excel file.
Secondly : Append itab from excel file.
Thirdly : Make loop at itab.
Finally : Fill batch input/bapi for every itab record.
Best regards.

Batch Input for Parked Invoice (FB60) - Lag in creation ???

Hi folks,
I'm using a batch input on FB60 so as to generate a parked invoice. Furthermore, I'm calling it in complex posting 'cause sometimes it implies posting on asset (posting keys 70 and 75).
The point is that the batch input works fine, but sometimes in the exact same situtation, with non rationnal explanation.
I'm using this :
sl_bdcoption-dismode = 'N'.
sl_bdcoption-racommit = 'X'.
sl_bdcoption-nobinpt = 'X'.
sl_bdcoption-updmode = 'L'.    " or A or S, still the same
CALL TRANSACTION 'FB60' USING tl_bdcdata
                          MESSAGES INTO tl_messtab
                          OPTIONS FROM sl_bdcoption.
COMMIT WORK AND WAIT.
so that I can catch the number of my created invoice from the message table. Indeed I need this to update BKPF which has some custom fields (on the Basis Data tab). All the transactional controls on my custom fields are deactivated through an Export to Memory and I know how the screen displays with the option sl_bdcoption-nobinpt = 'X', both set before the call.
First I thought my bug was coming from the Update Mode in structure sl_bdcoption, but I've tried to set it to A, S or even L. I've tried many options from that structure, but the bug remains random...
How can I be sure that the call is ended and that my new invoice is created ?
Any oher way I can do this ? Any BAPI I haven't found ?
Thx in advance for your help,
NH

Thx, I'll try the E mode. I hope it will solve that issue, it's driving me mad
Actually, even if the context I'm using the Batch Input seems complex, due to the complex posting, the invoice I generate in that particular program is quite simple.
I was hoping that someone has already saw that table half empty
Do you think it may come from the exit in FI used to add some custom fields on the 'Basis Data' tab ?
NH

Batch input session is not created

hello iam migrating inventory balance using standard batch input method .when iam running batch input session it is not created so nothing getting transfered.
and also when i uploaded the flat file and execute step read data it is showing 10 items but when execute next step show read data is showing only 1 item record.
can any one help with this thanks in advance.
Regards
priya

i got the answer i dint execute process overview after creating seesion

LEAVE TO TRANSACTION error in BDC batch input FOR LT06 TCODE

Hi,
Iam running CALL TRANSACTION method for creating Material Document numbers for MB1B Tcode .
On capturing the document numbers created in the above process Iam trying to run LT06 tcode to create Transfer orders using session method .
All this process is in a single program .
Here it is creating the transfer orders but with LEAVE TO TRANSATION is not allowed in batchinput error and hence the status of the session is INCORRECT .
It would be helpful if i get the earliest responce .
Thanks

self

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Similar Messages

Maybe you are looking for