Batch Input for VA31 and adding new partner

Dear All,
I have a already well running program, which is creating new scheduling agreement via transaction VA31 in batch input mode.
Now, there is a new requirement to add one partner in the header. I made a recording and saw that there is a subcreen SAPLV09C. I extended the program, but doesn't matter I'm doing I always get the message:
No batch input data for screen SAPMV45A 4002
Does anyone has experience with adding new partners in the header and can explain me how to make the right development.
Thanks in advance.
Klaus

Hi Klaus,
If you get the error No Batch input data for screen proceed as follows:
1. In the Installation Assistant mark the foreground checkbox (in the column FG of the Installation Assistant project view) of this specific eCATT.
2. Activate the project again.
3. Run the eCATT in foreground
seee this links
ftp://ftp.software.ibm.com/software/websphere/integration/wbiadapters/library/doc/pdf/mysap4/mysap4_60.pdf
www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm - 9k -
thanks
karthik
reward me if usefull

Similar Messages

  • I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

    I can not delete my history and adding new bookmarks.
    Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
    The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
    Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
    == This happened ==
    Every time Firefox opened
    == the Firefox is being used

    I think I have a solution.
    First, download the add-on SQManager. This should be included with FireFox, it is really good.
    Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
    Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
    This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
    I think that if I just delete all the websites in moz_hosts....
    Wa-la...History Gone!!!
    As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
    Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
    Please tell me if you see any flaw in this.
    ''I think it's the solution we've all been looking for!''

  • Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

    Hello,
    I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
    -when all data  is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
    The function module used to display the popup is: 'POPUP_TO_CONFIRM'
    I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
    Program         SAPLSPO1
    Function          OPT1
    Normally, in batch input, this is the way I pass user-commands:
    PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
    PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
    But it's not working for this particular situation.
    Any ideas?
    Thank you.
    Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
    Quality of subject title improved.

    Hi
    Find out under which condition popups appears.
    for that condition you have to put the following code
    PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
    PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
    Hope this helps,
    Rajat

  • Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new I used to set up my iphone.

    Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new one I used to set up on my iphone.

    You cannot merge accounts.
    Why did you start a new account?

  • Made a new iTunes address, and added new payment details, old apps won't update because my old signin pops up! Even tho in settings on on first page it's my new name? How can I remove the old signin name even if it takes all apps paid and free with it!!

    Made a new iTunes address, and added new payment details, old apps won't update because my old signin pops up! Even tho in settings on on first page it's my new name? How can I remove the old signin name even if it takes all apps paid and free with it!! Don't care if I have to lose all previous apps just don't want to be hassled with updates!

    You can't all apps are tied to the apple id that was used to purchase/download it.

  • I was using an 3GS which was SYNC thru the iTunes thru my PC  .. But I started using my new 4S and tried to plug in to my PC for SYNC and the New 4S is not identified by iTunes . It

    I was using an 3GS which was SYNC thru the iTunes thru my PC  .. But I started using my new 4S and tried to plug in to my PC for SYNC and the New 4S is not identified by iTunes . It says "the iPhone cud  not connect to iTunes for unknown reasons... Can anyone Pls help me on this as I have no way of SYNC my Contacts from the PC Out look ..

    i just now logged in the icloud from browser, there when you go to contacts, you will see a settings icon to the bottom left of the screen. it does give option to export and import vCards.. i did not see outlook option though.  i dont remember how i did it last time exactly.. outlook does create vcards, right?
    checkout this link, it might help you: http://www.pcworld.com/businesscenter/article/242401/syncing_icloud_with_windows _and_outlook.html
    hope it helps.

  • Want to use Reader Extensions for highlighting and adding comments

    Hi,
    The basic use for which we plan to use Adobe LiveCycle Reader Extensions is for highlighting and adding comments.
    In a J2EE application, we create PDF document at runtime using (PDFBox). The purpose to use Adobe LiveCycle Reader Extensions is when the end user sees the PDF created he/she should be able to add highlights and add comments to the PDF document and save it back to server.
    The question is what all I need to do. Just install Adobe LiveCycle Reader Extensions on the server. What should be done specifically when the PDF is created using PDFBox? Add any information to the PDF so that when PDF is viewed by the user he/she can add comments or highlight.
    Can I get sample application and I also need Developer Guide. I think Developer guide comes with the setup? Did not find any place where I can down load a demo setup of Adobe LiveCycle Reader Extensions.
    Can you please guide me in the right direction? I am collecting more information as I search the internet and go through the forum, but it will be very helpful if someone can give correct information.
    Thank You.
    Regards,
    Jay Chandran.

    Hi,
    I was reading Adobe Reader SDK document (Acrobat_SDK_overview.pdf), in that it is mentioned under
    About rights-enabled documents:
    You cannot programmatically rights-enable a PDF file.
    Well I am confused, because my requirement is like this:
    1. PDF is created using (PDFBox) as part in a J2EE application.
    2. After the PDF has been created, from the J2EE application, the PDF will be send to LiveCycle Extensions to right enable it. (There is no user interface, and it is planned to be done programatically using Adobe libraries. The PDF will be send to LiveCycle Server and Right Enabled PDF will be returned.)
    So if there is no way to "programmatically rights-enable a PDF file", how can it be done without having an web interface?
    Just to confirm, PDF can be prgramatically right-enabled using LiveCycle libraries right? I have to right enable PDF files prgramatically and not using LiveCycle web interface.
    Thank You.
    Regards,
    Jay Chandran.

  • Remove PR Mandatory for PO and Assign new PO Layout to one User

    Hi Experts,
    I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
    1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
    Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
    But ref to PR not removed, and new po layout is not coming.
    What should I do.
    Thanks in advance.
    GR

    why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
    regards,
    indranil

  • LSMW: Batch Input for modified XD01?

    Hey!
    I want to import some customers data via LSMW, however we are using an add-on in our R3. For this reason I recieved the message: 'Old data BKNA1 cannot be processed, ADD-ON exists', when I tried to create the batch input session. All the steps before were fine. The modification of xd01 is just one button to add some additional information. Do I have to record the whole batch input session on my own again or does anyone knows an other opportunity?
    kind regards

    Guess you need an end of record marker in field SENDE (BKNA1):
    End of record marker:                                                                               
    If a batch input structure is later extended, the new end of the structure is indicated by a special field (SENDE). If you are already   
    working with the new, extended structure, you must also supply this     
    field with the NODATA indicator when "initializing" the structure. As a 
    result, the system can recognize whether the data is based on the old or
    the new structure when the structure is imported.                                                                               
    Old structures can no longer be processed and the system terminates with
    an error message if the following prerequisites are fulfilled:                                                                               
    o   You are using the modification-free enhancement of the customer/vendor master either directly or indirectly via an SAP solution.                                                                               
    o   Either you or an SAP solution extends the structure.

  • No Batch Input for Screen 0300

    Hello
      I am doing an inter-company asset transfer using ABT1(Call Transaction).
      However for few assets its giving me the error as 'No Batch input found for screen' '0300' even though
      the message type in MESSTAB table is 'S'.And one I run the program again for same asset it works   properly.
        PERFORM 450_DYNPRO USING:
                   'X' 'SAPLAMDP_OLD' '0100',
                   ' ' 'RAIFP1-BLDAT'  L_SYDATE,          " Document Date
                   ' ' 'RAIFP1-BLART'  'AA',              " Document Type
                   ' ' 'RAIFP1-BUDAT'  L_PSTDAT,          " Posting Date
                   ' ' 'RAIFP1-TRAVA'  P_VAR,             " Transfer Variant
                   ' ' 'RAIFP1-BZDAT'  L_BZDAT,           " Asset Value Date
    Posting Specifications
                   ' ' 'RAIFP2-BUKRS' PWA_ASSET-BUKRS,    " From Company
                   ' ' 'RAIFP2-ANLN1' PWA_ASSET-ANLN1,    " Asset
                   ' ' 'RAIFP2-ANLN2' '0000',             " Sub Asset No
    To
                ' ' 'RAIFP3-BUKRS' P_BUKRTO,              " To Company from i/p screen
                   ' ' 'RAIFP3-XNANL' 'X',                " New Asset
    Revenue
                   ' ' 'RAIFP2-XERBW' 'X',                " NBV from area button
                   ' ' 'RAIFP2-AFABE' '01',               " Default 01
                   ' ' 'BDC_OKCODE' '/00',                " Enter
    *Second Screen
                   'X' 'SAPLAIST'    '2110',
                   ' ' 'ANLZ-KOSTL'  P_KOSTL,        " Cost Center
                   ' ' 'BDC_OKCODE' '=DETA'.         " Push  additional data
    Enter allocations tab Common for ABT1 and AS11 transaction
        PERFORM 450_DYNPRO USING:
          'X' 'SAPLAIST'    '1000',
          ' ' 'BDC_OKCODE'  '=TAB03',          " Go to Allocations tab
          'X' 'SAPLAIST'    '1000',
          ' ' 'ANLA-GDLGRP' P_GDLGRP,          " Enter value for eval. Grp 5
          ' ' 'BDC_OKCODE' '=TAB08'.
    In the screen create
        PERFORM 450_DYNPRO USING:
          'X' 'SAPLAIST'    '1000',
          ' ' 'BDC_OKCODE'  '=RW'.              " Go back to Second screen
        PERFORM 450_DYNPRO USING:
          'X' 'SAPLAIST'    '2110',
          ' ' 'BDC_OKCODE'  '=CREA',            " Create the transaction
       'X' 'SAPMSSY0'    '0120',
       ' ' 'BDC_OKCODE'  '=&ONT',
    Save the transaction
          'X' 'SAPLAMDP_OLD' '0100',
          ' ' 'BDC_OKCODE' '=SAVE'.
    Could anyone pls help in knowing me whats the problem?
    Thanks and Regards

    I think U need to handle screen 0300 .. and need to pass
    data ('No Batch input found for screen' '0300' )

  • Batch Input for Parked Invoice (FB60) - Lag in creation ???

    Hi folks,
    I'm using a batch input on FB60 so as to generate a parked invoice. Furthermore, I'm calling it in complex posting 'cause sometimes it implies posting on asset (posting keys 70 and 75).
    The point is that the batch input works fine, but sometimes in the exact same situtation, with non rationnal explanation.
    I'm using this :
      sl_bdcoption-dismode = 'N'.
      sl_bdcoption-racommit = 'X'.
      sl_bdcoption-nobinpt = 'X'.
      sl_bdcoption-updmode = 'L'.    " or A or S, still the same
      CALL TRANSACTION 'FB60' USING tl_bdcdata
                              MESSAGES INTO tl_messtab
                              OPTIONS FROM sl_bdcoption.
      COMMIT WORK AND WAIT.
    so that I can catch the number of my created invoice from the message table. Indeed I need this to update BKPF which has some custom fields (on the Basis Data tab). All the transactional controls on my custom fields are deactivated through an Export to Memory and I know how the screen displays with the option sl_bdcoption-nobinpt = 'X', both set before the call.
    First I thought my bug was coming from the Update Mode in structure sl_bdcoption, but I've tried to set it to A, S or even L. I've tried many options from that structure, but the bug remains random...
    How can I be sure that the call is ended and that my new invoice is created ?
    Any oher way I can do this ? Any BAPI I haven't found ?
    Thx in advance for your help,
    NH

    Thx, I'll try the E mode. I hope it will solve that issue, it's driving me mad
    Actually, even if the context I'm using the Batch Input seems complex, due to the complex posting, the invoice I generate in that particular program is quite simple.
    I was hoping that someone has already saw that table half empty
    Do you think it may come from the exit in FI used to add some custom fields on the 'Basis Data' tab ?
    NH

  • Creation of Batch Input for transaction C201

    Hello,
    Currently I am having a requirement to create a batch input session for tcode C201.
    Following steps we need to perform using batch input session:
    1. Go to tcode C201 and enter material and Plant.
    2. Then click on choose template and give Mater Recipe option.
    3. On next screen enter Recipe Group and Recipe.
    4. After that it will go to Copy Master Recipe screen and then giving status it will open other tabs like Operations, Materials etc.
    Now when I create recording, till step 3 it is continuing correctly. but when press enter after step 3 it goes to Create Mater Recipe instead of Copy..
    I got one SAP note 142022 but dont know how to implement this in my case.
    Can you please help me?
    Thanks and Regards
    Nishad

    As [Note 142022 - Batch input and CATT in recipe|https://service.sap.com/sap/support/notes/142022] explain, you have to add one step in your batch input with BDC_OKCODE "=TOFF" on the first dynpro so C201 will always use old screens which are batch-input compatible. (First check [Note 365051 - OK code TON does not work when creating recipes|https://service.sap.com/sap/support/notes/365051] is implemented on your system)
    SAPLCPDI 4000
                  BDC_CURSOR RC271-PLNNR
                  BDC_OKCODE =TOFF
    Regards,
    Raymond

  • Batch-input for exporting cost calculation to a local file (ecc 6.0)

    Hi,
    we had a batch-input to export some data in a local file (excel format) in SAP 4.5B.
    We recorded transaction CK11 for a material number, we got Itemization screen and then we recorded menu' option "List . Export . Local file / Spreadsheet). If the batch-input ran in foreground it would produce required outputs (some excel files).
    Now we are migrating from 4.5B version to Ecc6.0; we recorded same transaction (both ck11 and ck11n, to be more ), but at execution time the window for local file saving never is displayed and B.I. stops with error.
    One difference is that now data are collected into a container,  instead that in a write list ...

    Hi again,
    the data i look for is a result of calculation of different tables so for every single product, it is calculated. In standart CO reports, there is no such report that give me that detail.
    Finally i managed to call print OK code, but it was in the foreground processing mode, i cannot run it on backround processing..
    I know i misuse the LSMW, but i think LSMW may have such flexibility to use such reports, thanks to SAP.. it was an adhoc report i tried to combine, so writing a program may be much more time consuming.

  • Batch Input for user defined fields (SRM 4.0)

    Hello.
    Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
    and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
    But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
    How do I scroll in SRM?(What's the command to scroll in SRM)
    Regards
    Ogiwara

    better lock the user since he may some business documnt open and you can not proceed further.
    br
    muthu

  • TS3899 I have IPod Touch and always get gmail username and password is incorrect when I try to access gmail.  I tried deleting and adding new account, checked account via laptop which is good, checked network connections which is okay. Not sure what to do

    I have an iPod touch and cannot access gmail.  I always get username or password for gmail is incorrect.  I am able to access gmail via my Windows laptop just fine.  I tried deleting and adding a new account, verified that my network connections are working, bebooted my iPod, and verified that imap is enabled on my laptop.  Not sure what else to do.  Please help!!!

    Try going to this link and see if the instructions there help.
    https://www.google.com/accounts/DisplayUnlockCaptcha
    B-rock

Maybe you are looking for