Batch job failure

Hi ,
Can any one tell me why does batch job fails when there is no data?
Is there any means to check hat i.e. can we put some validations to check this?
Thanks in advance

hello alekhika....
Check if any procesing is done using sy-tcode or sy-ucomm.
Some times, using these in program and when scheduled a batch on this program will lead to dumps.
Instead, directly call program (instead of sy-tcode) and check.
Regards,
kishan

Similar Messages

How to find out batch job failure and taking action:

Normally We will monitor the batch jobs through transaction code sm37 for job monitoring. In SM37 we will give a batch job name date and time as input. In the first step we will check the batch job for the reason failure or check the spool request for the batch job for failures an help in analyzing the error
I understand from the my experience is that the batch may fail due to below reasons.
1.,Data issues : ex: Invalid character in quantity (Meins) field >>>> We will correct the corresponding document with correct value or we will manually run or request the team to rerun the batch job by excluding the problematic documents from the batch job variant so that it may process other documents.
2.Configuration issues : Materials XXXX is not extended for Plant >>>> we will contact the material master team or business to correct the data or we will raise sub contract call with support team to correct he data. Once the data been corrected and will request the team to rerun the batch job.
3.Performance issues : Volume of the data being processed by the batch job ,network problems.>>>Normally these kind of issues we will encounter during the month end process as there will lot of accounting transactions or documents being posted business hence it may cause the batch job failure as there is enough memory to complete the program or select queries in the program will timeout because of volume of the records.
4.Network issues. : Temporary connectivity issues in other partner systems :Outage in other partner systems like APO or other system like GTS will cause the batch job failure as Batch job not in position to connect other system to get the inforamtion and proceed for further steps.Nornmally we will check RFC destination status by running a custom program weather connectivity between system are in progress or not. then intimate other partner system for the further actions, Once the partner system comes online then we will intimate the team to restart or manually submit batch job.
Some times we will create a manual job by transaction code SM36.

I'm not sure what the question is among all that but if you want to check on jobs that are viewable via SM37 and started via SM36. The tables are TBTCP -Background Job Step Overview and TBTCO - Job Status Overview Table.
You can use the following FM to get job details:
GET_JOB_RUNTIME_INFO - Reading Background Job Runtime Data

Batch job for shipment and shipment cost doc

Dear all,
In case of our client, shipment docs and shipement cost docs are created using a batch job. There are some documents that have not been processed with this batch jobs as expected. Now i want to analyse the job log for thosse failures. For this i want to know the batch job names which i am unaware of. In SM37 i am unable to trace in a generic way.
I know that we can filter batch jobs using ABAP Prog. My question is that which programs have to be used here. are these RV56TRGN for shipment docs and RV56TRSL fir shipment cost docs?? Plz help as the issue needs serious attention ffom my side. also suggest how further i have to rectify this issue.
Regds,
Raghu

Hello,
The ABAP programs you have mentioned are correct and you can enter these in SM37 to check the job names, status etc.
RV56TRGN - creating shipment docs
RV56TRSL - Shipment costs
Check the spool for messages which will have the error docs.
Cheers !

Notification of job failure from GRC 5.2

Hi everybody,
Is there any way to have the system notify me when a batch job fails in GRC 5.2? I've got alerts configured, and we have a memory leak causing our Java instance to randomly reboot and occasionally kill background jobs; SAP is working on it with out Basis team. I would prefer not to have to check the jobs manually, but I didn't see anything in the job set up that would send a notification if a job fails.
Thanks!
Krysta

Krysta,
No such functionality available in GRC AC.
Will suggest that schedule small and large number of job, so that failure of one job is minimum.
Say separate job for user sync, and another one for role sync.....
similarly where possible separate job per system (alway select system from search help, never enter mannually in RAR)
check with SAP GRC which VIRSA_CC_??? table contain status of all the job of RAR (and similarly for other products),
so that your developers can generate alerts based on that.
hope it help
regards,
Surpreet

Monitoring DI batch job

I want to create an alert whenever a batch job fails. I can see a failure on the web client console. How can I grab that to send it to TSM?

Possible solutions are with XI 3.x, so it's not at all straightforward in XI Release 2.
What you're essentially looking for is an adapter - something that will adapt the Web Service data source into something that an Universe can connect to.
Haven't tried any of the Web Services adapter classes for RDBMS or ODBC drivers for Web Services, so can't recommend anything that would work.
Sincerely,
Ted Ueda

Find errors logged from oracle batch job...

Hi,
I have a batch job that calls a procedure.. code is as under
begin
sys.dbms_job.submit(job => :job,
                      what => 'begin
                                   delete_stale_data;
                                    end;',
                      next_date => to_date('29-06-2006 05:33:28', 'dd-mm-yyyy h24:mi:ss'),
                      interval => 'sysdate+(30/1440)');
commit;
end;Now, how can i get to view the error messages if
1) procedure runs into an exception and hence job is not executed
2) if job runs into some problem due to which it is not completed..
Thanks,
JP

"Viewing errors" is the wrong term to use - it assumes that there are devices like STDERR and STDOUT in Oracle that is written to when an error occurs.
There are no such devices in Oracle. Oracle itself will record system related errors (and messages) to the alert log of the database instance. Custom PL/SQL code can also write to the alert log using an undocumented call - but it is a very poor idea as the alert log is for the DBA to deal with system errors. Not with someone's application errors.
The correct method is to implement an application logging PL/SQL interface (package) that allows applications to log errors and warnings and messages (including debug stuff). The basic method of this API implementation is to create a log table and write messages (from applications) to this table using autonomous transactions. The API call can also record the system date/time, the current PL/SQL stack trace, client session details, etc.
Using such an API, you would schedule the job as follows:
Method 1:
The job becomes broken after 16 repeated failures (the exception is re-raised in order for DBMS_JOB to deal with it).
sys.dbms_job.submit(job => :job,
what => 'begin
delete_stale_data;
exception when OTHERS then
APPLOG.CriticalError( 'Error occured running DELETE_STALE_DATA', SQLCODE );
raise;
end;',
next_date => to_date('29-06-2006 05:33:28', 'dd-mm-yyyy h24:mi:ss'),
interval => 'sysdate+(30/1440)');
Method 2:
The job will never break. The exception is supressed and DBMS_JOB will not know that any errors occurred:
sys.dbms_job.submit(job => :job,
what => 'begin
delete_stale_data;
exception when OTHERS then
APPLOG.CriticalError( 'Error occured running DELETE_STALE_DATA', SQLCODE );
end;',
next_date => to_date('29-06-2006 05:33:28', 'dd-mm-yyyy h24:mi:ss'),
interval => 'sysdate+(30/1440)');

Batch job

Hi I am working on batch job .
my program is printing invoice as well as downloading and I have run this program in batch,
I am using the FM job_open , job_submit and job_close.
but it is failing in job_submit with sy-subrc eq 1 .
giving me error bad print parameter , I haven;t done this before.
I think it should be option.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
      authcknam = SY-UNAME "tbtcjob-authcknam
      jobcount = tbtcjob-jobcount
      jobname   = p_jobnam
      language = sy-langu
       report    = c_reprot
      variant   = pvariant
    EXCEPTIONS
      OTHERS    = 01.
could anybody pls guide me why it is so???
Regards.
Kusum.

you can below code
OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
                            WITH SMART LINEFEED.
    IF sy-subrc EQ 0.
      WHILE sy-subrc IS INITIAL.
        READ DATASET gv_file INTO gwa_header_file.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          APPEND gwa_header_file TO gt_header_file.
        ENDIF.
      ENDWHILE.
      CLOSE DATASET gv_file.
    ENDIF.
ENDIF.

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

How to get all AD User accounts, associated with any application/MSA/Batch Job running in a Local or Remote machine using Script (PowerShell)

Dear Scripting Guys,
I am working in an AD migration project (Migration from old legacy AD domains to single AD domain) and in the transition phase. Our infrastructure contains lots
of Users, Servers and Workstations. Authentication is being done through AD only. Many UNIX and LINUX based box are being authenticated through AD bridge to AD.
We have lot of applications in our environment. Many applications are configured to use Managed Service Accounts. Many Workstations and servers are running batch
jobs with AD user credentials. Many applications are using AD user accounts to carry out their processes.
We need to find out all those AD Users, which are configured as MSA, Which are configured for batch jobs and which are being used for different applications on
our network (Need to find out for every machine on network).
These identified AD Users will be migrated to the new Domain with top priority. I get stuck with this requirement and your support will be deeply appreciated.
I hope a well designed PS script can achieve this.
Thanks in advance...
Thanks & Regards Bedanta S Mishra

Hey Satyajit,
Thank you for your valuable reply. It is really a great notion to enable account logon audit and collect those events for the analysis. But you know it is also a tedious job when thousand of Users come in to picture. You can imagine how complex it will be
for this analysis, where more than 200000 users getting logged in through AD. It is the fact that when a batch / MS or an application uses a Domain Users credential with successful process, automatically a successful logon event will be triggered in associated
DC. But there are also too many users which are not part of these accounts like MSA/Batch jobs or not linked to any application. In that case we have to get through unwanted events.
Recently jrv, provided me a beautiful script to find out all MSA from a machine or from a list of machines in an AD environment. (Covers MSA part.)
$Report= 'Audit_Report.html'
$Computers= Get-ADComputer -Filter 'Enabled -eq $True' | Select -Expand Name
$head=@'
<title>Non-Standard Service Accounts</title>
<style>
BODY{background-color :#FFFFF}
TABLE{Border-width:thin;border-style: solid;border-color:Black;border-collapse: collapse;}
TH{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: ThreeDShadow}
TD{border-width: 1px;padding: 2px;border-style: solid;border-color: black;background-color: Transparent}
</style>
$sections=@()
foreach($computer in $Computers){
$sections+=Get-WmiObject -ComputerName $Computer -class Win32_Service -ErrorAction SilentlyContinue |
Select-Object -Property StartName,Name,DisplayName |
ConvertTo-Html -PreContent "<H2>Non-Standard Service Accounts on '$Computer'</H2>" -Fragment
$body=$sections | out-string
ConvertTo-Html -Body $body -Head $head | Out-File $report
Invoke-Item $report
A script can be designed to get all scheduled back ground batch jobs in a machine, from which the author / the Owner of that scheduled job can be extracted. like below one...
Function Get-ScheduledTasks
Param
[Alias("Computer","ComputerName")]
[Parameter(Position=1,ValuefromPipeline=$true,ValuefromPipelineByPropertyName=$true)]
[string[]]$Name = $env:COMPUTERNAME
[switch]$RootOnly = $false
Begin
$tasks = @()
$schedule = New-Object -ComObject "Schedule.Service"
Process
Function Get-Tasks
Param($path)
$out = @()
$schedule.GetFolder($path).GetTasks(0) | % {
$xml = [xml]$_.xml
$out += New-Object psobject -Property @{
"ComputerName" = $Computer
"Name" = $_.Name
"Path" = $_.Path
"LastRunTime" = $_.LastRunTime
"NextRunTime" = $_.NextRunTime
"Actions" = ($xml.Task.Actions.Exec | % { "$($_.Command) $($_.Arguments)" }) -join "`n"
"Triggers" = $(If($xml.task.triggers){ForEach($task in ($xml.task.triggers | gm | Where{$_.membertype -eq "Property"})){$xml.task.triggers.$($task.name)}})
"Enabled" = $xml.task.settings.enabled
"Author" = $xml.task.principals.Principal.UserID
"Description" = $xml.task.registrationInfo.Description
"LastTaskResult" = $_.LastTaskResult
"RunAs" = $xml.task.principals.principal.userid
If(!$RootOnly)
$schedule.GetFolder($path).GetFolders(0) | % {
$out += get-Tasks($_.Path)
$out
ForEach($Computer in $Name)
If(Test-Connection $computer -count 1 -quiet)
$schedule.connect($Computer)
$tasks += Get-Tasks "\"
Else
Write-Error "Cannot connect to $Computer. Please check it's network connectivity."
Break
$tasks
End
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($schedule) | Out-Null
Remove-Variable schedule
Get-ScheduledTasks -RootOnly | Format-Table -Wrap -Autosize -Property RunAs,ComputerName,Actions
So I think, can a PS script be designed to get the report of all running applications which use domain accounts for their authentication to carry out their process. So from that result we can filter out the AD accounts being used for those
applications. After that these three individual modules can be compacted in to a single script to provide the desired output as per the requirement in a single report.
Thanks & Regards Bedanta S Mishra

HP ePrint Home&Biz app not working. Print job failure:busy message appears on tablet

I have an HP Laserjet P1102W and am trying to print from a Viewsonic tablet (android OS) using the HP ePrint Home&Biz app. I can send an email to the printer via the tablet and it prints the document with no problems.
I apologize in advance for the long message...
If I try and hit the PRINT key on the lower bar (which says 'HP Laserjet Professional P1102W (NPI7...host name), all that happens is blue & green LED's come on, green, blue flashes, green, blue flashes, green, blue flashes, then green and blue stay on steady. Just before the blue and green come on steady at the end, the "print job failure:busy" message flashes on my tablet.
I assume the sequence of LED flashes is the HP printer receiving a print command 3 times and can not perform the task because the printer thinks it is busy.
After searching for this problem on the net, it would appear I am not the only person with this issue. And yes, I have tried powering down my modem, printer, PC, and tablet and restarting all the above. Not that the PC has anything to do with it, but I am desperate.
Does anyone have a viable working solution to this problem???

Hello,
Thanks for the post. With this one, there is a firmware update available for the printer, and I've included a link below that with some excellent steps to check regarding this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=41103...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02933944&cc=us&dlc=en&lc=en&product=4110396&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Report to be sent to a list of recipients in an e:mail (part of batch job)

Hi,
I need to generate a report using ALV functionality.
Currently my report requirement is to sent to a list of recipients in an e:mail (part of the batch job set-up) and the recipients just download the report in a spreadsheet format.
Could you please give me the suggestions the way which I need to follow and how I will be able to set this report as a part of batch job which will send the report details to the users in the form of Email.
Points will be rewarded for the answers.
Regards,
Ravi Ganji

Hi,
IN SM36..You will see a button for "Spool list recipient" which is next to the target server button..
press that button..
Give the email address in the recipient field..
GIve the steps and start condition and then release the job..
THanks,
Naren

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

Batch job for collecting Blocked Deliveries

Hi,
Can anyone help me, i need to collect all the orders that have been blocked for delivery and send the results to an email address.
I created a batch job gave the program for SD Documents blocked for deliveries, but it doesnt seem to work, can anyone please give a step by step procedure.
Thanks alot,
Michelle.

1. T.code SM36- Here you will creating the job
2. Give the appropriate variants and the back ground user id
3. once this is done, go to the Spool receipient and give the email id where you want to send the mail to. Run the job now. You should receive the mail now, provide the connections are maintained.
Hope this will resolve the issue.
Mani

Duplicate deliveries getting created by batch job against STO

Hi Experts,
I am facing one issue where duplicate deliveries are getting created by batch job against Intercopmany STO.
Scenario is PO having one line item with ordered qty of 8000kg.
Through batch job, two deliveries got created on same day for PO line item.
One delivery got created for 8000kg and another delivery has got created for 7000Kg. So user has deleted second delivery of 7000kg.
Next day again the delivery got created for 8000kg for the same PO line item through batch job.
I am wondering how the duplicate deliveries are getting created by batch job for PO even though it has no open items.
All deliveries got created through batch job only as cross checked the user name in delivery.
Kindly help to fix the issue.

Hi Amit
I assume you are talking about outbound deliveries. In this case it would be worth checking the customer master record for the receiving plant. In the sales area data there is a shipping tab which contains several settings used to control delivery creation for customers.
It is possible to control how the system behaves when you have a stock shortage and restrict the number of partial deliveries. This might help you control this situation and might be the cause.
Regards
Robyn

Batch Job not Generating Spool No

Hi Experts,
We had a custom program where we are printing multiple invoice in a single go i.e all invoices for a particular sales office are printed in a single spool request. for foreground execution it is running fine. But after creating variant of it on selection screen & submitting the program to Batch job it is not creating spool no when the job is finished what could be the reason.?
Also i would like to tell you that we are asking user to give a invoice no range on the selection screen.
Edited by: priyeshosi on Jan 4, 2012 5:03 PM

Hi priyeshosi ,
If you use function modules start with GUI_* or WS_* in your report , then you can't generate the spool.
reason for this, Please check this link,
http://www.sap-img.com/ab004.htm
Regards,
Selva M

Batch job failure

Similar Messages

Maybe you are looking for