Batch job for shipment and shipment cost doc

Dear all,
In case of our client, shipment docs and shipement cost docs are created using a batch job. There are some documents that have not been processed with this batch jobs as expected. Now i want to analyse the job log for thosse failures. For this i want to know the batch job names which i am unaware of. In SM37 i am unable to trace in a generic way.
I know that we can filter batch jobs using ABAP Prog. My question is that which programs have to be used here. are these RV56TRGN for shipment docs and RV56TRSL fir shipment cost docs?? Plz help as the issue needs serious attention ffom my side. also suggest how further i have to rectify this issue.
Regds,
Raghu

Hello,
The ABAP programs you have mentioned are correct and you can enter these in SM37 to check the job names, status etc.
RV56TRGN  - creating shipment docs
RV56TRSL - Shipment costs
Check the spool for messages which will have the error docs.
Cheers !

Similar Messages

  • Two Shipment and Shipping cost docs using a single delivery doc.

    SAP Gurus,
                       I'v a delivery document with a single line item and i would like to create two shipmt and shipping cost document since the material movement will be handled by two different freight vendors from the point of origin - transfer - Destination. I have a route setup for these stages, and i assigned each service agent to each stage(legs) and also marked each leg is shpcost-relv. My question is the system keeps creating only two shipment doc without any service agent on a header level but its not creating any shpping cost doc.
    Thanks

    Please post into Logistics Execution forum. MM forum is not the right place for this question.
    Regards,
    Dominik Modrzejewski

  • Looking for some demo on shipment and shimpment cost in Transportation

    Hi, everybody:
       I wanna some demo on shipment and shipment cost function of Transportation.
       Would you send some documents to my e-mail box below:
      [email protected]
      Thanks for your kind help!
    Justin

    Hi Justin could you forward the mails you got to my mail id
    [email protected]
    Thanks in advance

  • Rail Car shipments and Shipment Cost Document

    Hi all,
    We have a rail car shipments scenario. We wanted to include the freight forwarder in the shipment cost document. The FF is not one of the carriers in the route stages ( hence they are not coming the shipment cost document) but they so some sort of documentation for which we pay them . The logistics department wanted the FF to come in the shipment cost document. At which stage of the rail car shipment /routes we can enter them so that a SCD will be created for this.
    Regards,

    hi,
    because there is no any T.code whic SAP has provided on the same.
    you can use BATCH JOBS for your requriment.
    other wise this is a major ENHANCEMENT.
    you need to catch hold of BAPI & develop a Z screen for your requriment and do it.
    please check and confirm
    balajia

  • Taking long time filling the setup tables for sales and shipment

    Hi ,
    I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
    It took 16 hours just to bring 6 months of  sales history  data in the test environment .
    Cn anybody help on this issue why it is taking that much of time ...
    I am trying to  load the sales data from R/3 into APO-BW from 2005 to 2007 .......
    It is taking 16 hours to fill the data for only 6 months .

    Hi,
    1. delete data and refill the setuptables again by spliting to several small pieces.
    2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
    you need to check with PSA and base tables.
    keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
    correct if i'm wrong.
    either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
    User exit not a good solution. it's one possibility.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • Help needed in creating a batch job for delivery

    Hi gurus
    Can somebody tell me the process of creating a batch job ..for creation of delivery.. is this the same process to create the batch jobs for invoices also?
    thankyou
    bj

    hello jaya ,gsl
    thankyou very much for ur help .. I have tried creating a variant .. in vl10batch.. and ive assigned it a scheduled time .. i craeted a open order..  and when the scheduled time has arrived and is over,i went to the order and still i dont see any delivery doc created .. and in sm37 its shows that the job is finished ..i even tried sm36 .. of creating a job for the variant.that ive craeted in vl10batch .and then assigning the job in sm37.. i can see the job that ive created in sm37 it is changing its status from released to finished .. as per the scheduled time but the delivery is not created .. i tried vf06 for a billing   variant.. and went to sm36 craeted a job for the variant..using the program name.. and next to sm37 i can  see the created  job in the spool also..but somehow it is  not creating the billing doc also..
    can u help me to find where it actually went wrong with me ?
    thanksalot in advance..

  • Problem in creating Batch job for programs in different servers.

    Hi All,
    I have a requirement like i have 2 different programs ( PRG1,PRG2 ) running in 3 different SAP servers (SER1,SER2,SER3).
    I want to create a batch job for the programs.
    Here When I run the PRG1 in Server SER1,it will create a file1 in SER1 as well as the other 2 servers (SER2 and SER3).
    It just create a file and there is no content in the file.Once i start writing records to file1in SER1,the same record will be started writing in SER2 and SER3.This is using PRG1.
    Once PRG1 will complete writing records in file,Next PRG2 will run in SER2 using file created by PRG1.
    I want to create a batch job for PRG1.
    How to trigger the PRG2 after completing job1 for PRG1 without any manual interaction.
    Please help me for this.

    Hi Ambili
    You can set steps in these jobs in transaction SM36.
    You can define that Job 2 starts after Job1 complete sucessfully and same game for other jobs.
    Please, check attachment for detailed information about that
    Kind regards
    Edited by: Carlos Machado on May 27, 2010 6:01 PM

  • Batch job for IDOC processing in 64 status

    Hi experts ,
    i want to know the name of Batch job for IDOC processing in 64 status.
    I have configured the partner profiles as 'process immediatly'.
    So with this configuration whenever an idoc comes in production it gets processed immediatly and automatically.
    i want to know how they are getting processed automatically.
    is there any job which looks for these idocs(in 64 status and process immediatly flag) and process it.
    What is the trigger for thiese idocs processing???
    Please guide me
    thanks in advance
    Anit gautam

    Hi Thanks for ur reply.
    =====Upon arrival, "process immediately" should fire that process =====
    how it is getting fire?
    means is there any batch job running which looks for idoc in 64 status or is there any event which get triggered when an idoc
    comes in 64 status.
    why we use OYEB transaction???
    Regards

  • Set a batch job for LP21 transaction

    How to set up a batch job for LP21 transaction.

    first you call LP21.
    enter your selection criteria
    click save button
    give name and a description for the variant and save.
    leave LP21
    call SM36
    enter a job name e.g. "MY Replenishment run"
    click start conditons button
    click date/time button
    enter a date and a time when the job shall run
    click button for periodic value
    click daily
    click save
    click save
    now your back at define job
    click step button
    enter a user  that has the rights to run this job (maybe your own user id, maybe a functional user id)
    enter the ABAP name e.g. RLLNACH1
    enter the variant name of the variant you created earlier in LP21 (you can use F4 to find it)
    enter language
    SAVE
    now you are in the step list overview.
    you can leave this screen
    back on the job definition  just click the SAVE button
    thats all

  • Deactivate batch job for purchase requisitions on perticulra plant

    Dear Freinds,
    I have to deactivate batch job for purchase requisitions on plant 1020.
    Can you guide me how can i do this...........?

    Hi,
    I am not sure in which client you are talking about.
    If this is in production clients,then user run jobs. We need to ask them to deactivate in ARP. We generally dont have access for that.
    Thanks.

  • Is it possible to create a batch job for program RPRCCC00

    Dear All,
    I want to create a schedul batch job for program RPRCCC00. Have you come across with this scenario.
    Thanks in advance
    Regards
    Shanu

    Hi,
    Yes, you can create a batch job of the program RPRCCC00.
    Using SM36 transaction, you can create a batch job.
    Hope this helps.
    Thanks,
    Prashanth

  • What's the best app for editing and viewing office doc's

    What is the best App for editing and viewing office doc's, that will be compatable with IPhone 5S and Air pad?

    Search the app store, find one that you like and that works for you.

  • How to create a batch job for transaction SM13 or SM37

    How to create a batch job for transaction SM13 or SM37?
    I want to create a batch job for t-code SM13/SM37, the jobs will send a email to my inbox when the errors occurred in SM13/SM37.
    How to do this? thanks in advance.

    Hi,
    Check the link:
    http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    Make sure the CCMS agent installation is in place as per the Monitoring setup guide.
    Follow the link Central auto reactions for configuring alert mails.
    Regards,
    Srikishan

  • Delivery - Shipment and Shipment cost docs

    Hi,
    I created delivery and completed invoicing , when I tried to create shipment doc with VT01N , Its asking for tranportation planing point and shipment type. FYI I have configured routes , legs(Direct leg) and shipment doc types.My question is , is there any way to link delivery document to shipment docu and dhipment cost document?
    Is there any field in delivery type to link with shipment doc ?
    Is there anything to do with copying controls for this?
    what is the T.code to maintain condition records(header and item) for shipment cost document?
    can anyone help me on this
    Thanks,
    Kanna.

    Hi kanna,
    I support sarthak mohanty. Yes usually if you are using Transportaion in your business process. then the PGI definately takes place through Shipment only.
    Even i do not understand until you complete PGI how did you manage getting an Invoice. Is it Proforma Invoice that was you created before PGI or Wher exactly PGI Takes place in your process. Let us know so that we can give you better info.
    Now coming to Process point:
    Transportation Planning Point (TPP) is the Highest Organizational unit like SD has Sales Organization.
    Each company code contain their own TPP. There are no Copy controls from Delivery to Shipment. the only way to connect Delivery with shipment is you have to assign delivery to shipment then all the relevant info copied into shipment from the delivery.
    To create a Shipment you need Shipment Type and TPP.
    Based on your transportaion models Shipment Type varies like Order Types OR,CR,DR etc.......
    You can use T-Code TK11 to maintain the condition Record, TK12 - to Change and TK13 - to Display
    Regards
    Venkat

  • Shipment and Shipment Cost

    dear All,
    While creating Shipment I noticed that the same delivery can be refernced multiple times i.e. the same delivery can be used to create multiple shipments.How to reolve this problem.
    Secondly while creating shipment cost I find that Net Value is zero and hence no Acctg.Doc is getting created.
    What is the problem.
    Please HELP.
    Regards.
    Saurav M

    Hi Saurav,
    It depends on how you define the shipment types for the shipment.  If you create shipment using shipment type that has multiple leg, then you can create multiple shipment for the same delivery.  However, if you create shipment using shipment type like direct, or return leg, you can only create one shipment for the delivery.  The Transportation Planning Status on the delivery header (under Transport tab, on the overview screen) is set based on the leg determination logic that you configure for the shipment type.
    For more information, you can go to a delivery using VL03N, then press F1 on the field for help.
    Hope this help you solve the problem.
    Quynh Nguyen.

Maybe you are looking for

  • Long time for Adobe Media Encoder to encode 3 minute video

    I created a Premiere Pro project with a dynamic link to Adobe After effects (both CS4 versions). Upon finishing this PremPro project which is a 3 minute song with 3d animation playing in the background, I chose Export Media. Since first try was takin

  • Report for the past 12 Months

    HI    Data Avaliable in CUBE Emp ID Abs Start Date Abs End Date No of Abs Days Cal Month/year (Abs Start Date) Requirment To list all data  from Current Cal Month/Year to previous 12 months How can i do this

  • Possible to use Ms Excel data as a dataprovider in Flashbuilder for charting

    My dept has an excel spreadsheet with sales data. I'd like to know if anyone has used Excel data for charting in Flashbuilder? Does anyone know of any resources or samples? Thanks in advance.

  • Cracked border around screen.

    Hello, Due to my carelessness (e.g., constantly carrying around my macbook pro with the screen open), a crack has developed in the lower left hand corner of the border surrounding the screen (not the actual screen itself). Now, every time I open or c

  • Error: unable to resolve '/images/title.png' for transcoding

    Error: Error: unable to resolve '/images/title.png' for transcoding Code: [Embed(source="/images/title.png")] private var title:Class; In FB3, I get this error when building. At the root of the project I have an assets folder, which I have added as a