Batch split in inbound delivery VL31N / VL32N

Hi,
I am using standard function GN_DELIVERY_CREATE in order  to create inbound delivery document, it works fine, but it doesn't allow to specify batch split!
So, in order to enter a batch split I have as first create the delivery with this standard function and then enter in VL32N and create the split through batch input.
I am experiencing a lot of issues using batch input in VL32N (same thing with VL32), I need to avoid the call transaction, is there someone that have solved this problem through a BAPI or some other standard function that allows to create batch split?
Thank you in advance
Alessandro

use BAPI: BAPI_OUTB_DELIVERY_CONFIRM_DEC
I used this long time back. it worked fine.

Similar Messages

  • Issue with BATCH SPLIT with Inbound Delivery

    Hi,
    We are in an SAP upgrade project from 4.7 to ECC 6.0, we would require to develop an Interface Program to perform BATCH SPLIT for an Inbound Delivery, I tried with BAPI BAPI_INB_DELIVERY_CHANGE but it seems to be work only to change the existing line items, by requirement is to create new BATCH SPLIT for a given inbound delivery, can anyone help me in finding the appropriate BAPIs, thanks in advance.
    Regards
    Bala

    Hi Bala,
    Have you tried BAPI_INB_DELIVERY_CONFIRM_DEC? If you check the documentation of this BAPI, at the bottom of it there's a statement:
    If you report back batch splits that were created in the ERP system, you cannot fill the hierarchy fields HIERARITEM and USEHIERITM.
    If you created split items in the WM system and have reported back, these two hierarchy fields must contain information.
    BR
    Raf

  • Create a Batch split for inbound delivery using IDOC

    Hi,
    I have an requirement to create Batch splits in the Inbound delivery.
    These Inbound deliveries are created using IDOC.
    So when the inbound deliveries are created through IDOC the Batch split is not happening.
    How can i achieve this through Coding?
    Any pointers on this will be highly appreciated.

    Hi ,
    Try this link.
    http://wiki.sdn.sap.com/wiki/display/ABAP/Toapplybatchsplitinanoutbound+delivery
    Regards
    HM

  • Batch Split in Inbound Delivery document

    Hello Friends,
      In decentralized WM managed scenario, inbound delivery is created automatically when the storage location is HU managed.   In the current design, we need to use MIGO/MB1B transaction for replicating stocks into warehouse location, and all the materials are managed.
    We have a batch split management to use for distributing the cumulative batches into warehouse.  In our testing, transaction MB1B cannot support batch split management however transaction MIGO is closely supporting our need.  In the MIGO, we have a distributed quantity functionality and through this we can able to split the quantity into multiple batches. 
    However, when during inbound delivery generation (Inbound delivery generates in background from MIGO document when location is HU managed), system is generating the individual line item instead batch split, example -
    In MIGO -
    Total Quantity - 10
    Item: 00001
    Material : ZZZYYY
    Batch1:  AAAA
    Quantity : 4
    Item: 00001
    Material : ZZZYYY
    Batch2:  AAAB
    Quantity : 6
    In Inbound Delivery -
    Item:10
    Material : ZZZYYY
    Batch1:  AAAA
    Quantity: 4
    Item:20
    Material : ZZZYYY
    Batch2:  AAAB
    Quantity : 6
    We need as below in inbound delivery -
    Item:10
    Material : ZZZYYY
    item: 90001
    Batch1:  AAAA
    Quantity : 4
    item: 90001
    Batch2:  AAAB
    Quantity : 6
    Please suggest.  Appreciate your reply.
    Thanks
    Best Regards,
    Goutam

    use BAPI: BAPI_OUTB_DELIVERY_CONFIRM_DEC
    I used this long time back. it worked fine.

  • Batch split in inbound delivery according to Handling Units in Idoc

    Hi everyone,
    the Idoc with different HU's segments E1EDL37 (all the same batch no.), causes different items in the inbound delivery. But we need only one item, because it's the same batch no.!
    Where can I customize this?
    Thx in advance!
    Thomas

    use BAPI: BAPI_OUTB_DELIVERY_CONFIRM_DEC
    I used this long time back. it worked fine.

  • How to make Classfication entry pop up at Inbound delivery VL31N?

    Dear All
    I need to have the characteristics values of the class assigned to my material POP UP during the Batch Creation in Inbound Delivery (VL31N)
    I have activated the necessary config and the batch number is able to generated successfully. However, the characteristic value does not pop up to ask me for entry.
    I have also tried to make the characteristic value as Required Entry but it still does not pop up to ask me for entry, instead it just shows a general message as follows:
    Status changed: missing values for required chars in EFASH12Z          0000001053
    Message no. CL500
    Diagnosis
    You want to save an allocation to a class with released status. However, the class contains characteristics for which an entry is required.
    System Response
    The system changes the status of the allocation to incomplete.
    Procedure
    If you want to save the allocation with released status, first you must assign values to all the required characteristics. Then you can set the status you require.
    Please advise. Thanks.
    Point will be rewarded handsomely.
    Edited by: Daimos on Nov 3, 2008 9:43 AM

    Dear all
    Hi, I have maintained the value as 3: Batch Installation, Classificaiton and SLED Check in the config
    SPRO > Logistics Execution > Shipping > Deliveries > Define Batch Creation Controls in Inbound Deliveries. However, the Inbound Delivery VL31N are able to create batch but not able to create classification.
    Batch Creation of Inbound Delivery (as shown follows) allows us to create batch during inbound delivery.
    [Batch Creation of Inbound Delivery|http://img512.imageshack.us/img512/5332/inbounddeliverywithclasqd5.jpg]
    However, Classification of this Material does not pop up as follows, and there is no Button to click for classification:
    http://img512.imageshack.us/img51[classificaiton Tab not appeared at all|http://img512.imageshack.us/img512/2995/inbounddeliverywithclaslh5.jpg/]
    Full marks will be awarded beautifully.
    Thanks

  • Is there any program i can use to batch delete the inbound delivery ?

    Hello, everyone.
        Is there any program i can use to batch delete the inbound delivery ? Thanks.
    Xinzhou gao.

    Hi,
       VL66 is used for deleting temporary inbound deliveries that have been marked with the deletion flag in the database, the temporary deliveries should have the deletion flag selected in the database, but i want to delete the normal inbound delivery without deletion flag now, is there any  other solutions? Thanks.
    Xinzhou gao.

  • Finding FM/BAPI/RFC for Create Inbound Delivery(vl31n).

    Hi all,
    i need for a FM/BAPI/RFC for Create Inbound Delivery(vl31n) or ASN
    where in import Parameter i have to pass -
    *vendor no*
    *PO no*
    *External ID no*
    *Delivery date*
    *TransPlanngDate*
    *BillOfLad*
    *GR/GI Slip*
    in Export i need ASN no and in tables we can use ITEM details.
    Regards,
    Sunil sahoo.

    Hi,
    Check the below link
    [https://forums.sdn.sap.com/click.jspa?searchID=16938983&messageID=5780492]
    Regards,
    Surinder

  • Quality certficates for batch split items in delivery

    Hi Masters
       How to make the output determination for outgoing quality certificates to select the output type LQCB
    for batch split items in Delivery.
    What is the routine to be selected in the output determination to map this scenario?
    Regards
    Mohan

    Hi Masters
            My problem is When i create a delivery for the items with batch split, the output type LQCB is not determined ie., not automatically get assigned in the delivery item.Hence the delivery items are not listed while executing T code QC20/
    What am I missing?
    -mohan

  • Finding BAPI for  inbound Delivery change(VL32N)

    HI,
    Plz help me For finding BAPI for  inbound Delivery change(VL32N).
    I have to pass delivery no as input parameter and should able to change shipment heder information
    like Special processing indicator.
    REGARDS,
    Sunil Sahoo.

    hi ,
    there are three  BAPI  your requirment
    1) BAPI_INB_DELIVERY_CONFIRM_DEC
    2) BAPI_INB_DELIVERY_SAVEREPLICA
    3) BAPI_INB_DELIVERY_CHANGE
    but for requirment
    The third BAPI
    BAPI_INB_DELIVERY_CHANGE
    will Sound promising. try this out
    regards
    Prashant

  • Batch Split on a delivery

    Hi All,
    Can someone explain what batch split on the delivery means and how it works . Why is it used?
    Thanks,
    Sandeep.

    Hi,
    You can just search the forum or help.sap.com documentation for details.
    For example, Check the SAP link [Executing Batch Splits in Deliveries|http://help.sap.com/saphelp_47x200/helpdata/en/dd/560cd0545a11d1a7020000e829fd11/frameset.htm]
    Regards

  • Split of Inbound Delivery

    Dear Expert,
    Is there a TCode similar to VLSP - Subsequent Outbound-Delivery Split to split Inbound Delivery?
    Thanks

    Hi,
      I don't think there is a seperate transaction to split delivery. I should be split automatically based on the settings. Say for example if Batch Management is active in your system, If you receive more than one batch on single line item, then Delivery split should happen automatically based on the batch you receive on that Delivery item.
    Thanks
    Funky Tech.

  • Authorization  in purchase order(ME21N) and inbound delivery(VL31N)i

    I have the following scenario and requirement:
    there is a customer adopt concentrated procurement. the headquarter create purchase order and the branches create the inbound delivery. all the data including company code, purchase organization, purchase group and the plant are same except the information of goods receipt person we put in header text field.
    now i want to control the authorization in VL31N depend on the goods receipt person or something related, how can do this? please kindly let me know?

    Hi,
    You can use the storage location or shipping point as authorization control, these two should be different for different locations.
    Regards,
    Ramakrishna

  • Batch splitting for Outbound delivery using BAPI_OUTB_DELIVERY_CHANGE

    Hi all,
    Let me explain the scenario first.
    We are going to create a delivery in SAP with some line items and send it to a non-sap third party WMS.  They will pick the goods and send the delivery confirmation back to SAP.  In SAP we need to delivery confirmation and PGI.
    The problem is when the third Part WMS does a batch split for a particular line item, we need to update the same in SAP and then do the PGI.  For this I was trying to use BAPI_OUTB_DELIVERY_CHANGE to create split batches.  It is splitting the batches but the overall pick status is becoming B (Partially picked).  SO it is not allowing to do the PGI.
    Can anyone solve my problem

    Hi Bala,
    make sure you are setting...
    itemdata-dlv_qty
    itemdata-dlv_qty_imunit
    itemdata-fact_unit_nom     e.g = 1.
    itemdata-fact_unit_denom  e.g = 1.
    Rgds
    Glenn

  • No batch split performed for delivery, instead 2 items

    Hi,
    I have batch managed materials and during creation of the delivery, the system does not create a batch split, instead it created 2 seperate line items for each batch.
    This is causing problems during EDI invoicing (intracompany): the same item multiple times in the deliveyr means the same item multiple times on the invoice and the EDI invoice cannot be posted.
    Any configuration available to get the batch split instead of seperate items?
    Thanks,
    MZ

    Its a std batch split process.
    as per above in example, if the order qtty is 351 TO, then system will determine 2 batches, if in VCH2, number of splits maintained more than 1.
    What exactly you are expecting?
    *at delivery level it should determined two batches separately & pickup complete from the batch*
    pick up complete from the batch - means what. its incomplete.

Maybe you are looking for

  • I'd like to copy my iWeb photos & comments and put them into a Photo Book

    Instead of building a Photo Book from scratch in iPhoto, I'd like to copy several photo pages with comments from iWeb and transfer them into a Photo Book. I tried to copy/paste and this doesn't work - the comments do not get captured. Has anyone done

  • IPad doesn't display correct album art

    I could really use some help here, I am at the end of my rope.  I have HomeSharing on so that my iPads and iPhones will play music and movies from our iTunes library.  I have an iPhone 5, an iPhone 4S, an iPad 4 and (2) iPad 2 models.  Both iPhones a

  • HOW CAN I GET RID OF THE EVENTS CATEGORY?

    There are days that I will add only one picture to iPhoto and it becomes an event. Every time I add a new picture to iPhoto 8 I get a new event. This past week I have been renaming some albums and adding new albums and folders and that has had a very

  • Duplicate Overheads in Sales Order costing

    Hi Experts, We are facing an issue in VA02 and VA22. Here we are getting duplicate overheads in costing as below image: Kindly help. I am an ABAPer and debugged for it but could not find any bug. So this functional approach could help, I thought. Tha

  • Orphan "Application Contacts" - Application Endpoints

    I am getting six errors when the address book syncs. They appear to be caused by some objects in "CN=Application Contacts,CN=RTC Service,CN=Services,CN=Configuration,DC=DOMAIN,DC=com".  Looking at ADSI or Sites & Services, I found the accounts displa