Batch split using BAPI_OUTB_DELIVERY_CHANGE
I want to use BAPI_OUTB_DELIVERY_CHANGE to edit the D/O to add in the batch split and serial no. I pass in the following parameters:
delivery = '0080740827'.
item_data-deliv_numb = '0080740827'.
item_data-deliv_item = '00010'.
item_data-material = 'SL15C-ACPOA-003'.
item_data-dlv_qty = 0.
append item_data
item_data-deliv_numb = '0080740827'.
item_data-deliv_numb = '90001'.
item_data-deliv_item = '00010'.
item_data-material = 'SL15C-ACPOA-003'.
item_data-hieraritem = '00010'.
item_data-usehieritm = '1'.
item_data-batch = '20483602'.
item_data-dlv_qty = 2.
append item_data.
item_serial_no-deliv_numb = '0080740827'.
item_serial_no-itm_number = '90001'.
item_serial_no-serialno = '74714'.
append item_serial_no.
item_serial_no-deliv_numb = '0080740827'.
item_serial_no-itm_number = '90001'.
item_serial_no-serialno = '74755'.
append item_serial_no.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data =
header_control =
delivery = delivery
TECHN_CONTROL =
TABLES
HEADER_PARTNER =
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
item_data = item_data
item_control = item_control
item_serial_no = item_serial_no
SUPPLIER_CONS_DATA =
EXTENSION1 =
EXTENSION2 =
return = return.
TOKENREFERENCE =
When I run the program, the system has error and ask me to put in header_data and header_control. I dont want to change the header_data, I just want to change the item data, how do I fill in header_data and header_control? is my parameters correct?
declare internal table for header_data and header_control. and dont append any values to it. simply assign it.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = header_data
header_control = header_control
delivery = delivery
TECHN_CONTROL =
TABLES
HEADER_PARTNER =
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
item_data = item_data
item_control = item_control
item_serial_no = item_serial_no
SUPPLIER_CONS_DATA =
EXTENSION1 =
EXTENSION2 =
return = return.
TOKENREFERENCE =
May be it will solve your problem.
Thanks
Muthappan
Similar Messages
-
Batch Split using BAPI_OUTB_DELIVERY_CHANGE - Possible?
Hello,
I'm using BAPI_OUTB_DELIVERY_CREATE_SLS to create an outbound delivery based on a sales order. I need my outbound delivery to be created without batch split at this moment. This is working fine.
Now I need to add the batch split information to the outbound delivery that is already created. I've been trying to use BAPI_OUTB_DELIVERY_CHANGE but so far with no success. The batch split items just do not appear in my delivery - the best I could do was changing the batch number of the parent item. Is there a way to make this BAPI create the batch split items (90001, 900002, etc)?
Regards,
JoãHello,
I'm using BAPI_OUTB_DELIVERY_CREATE_SLS to create an outbound delivery based on a sales order. I need my outbound delivery to be created without batch split at this moment. This is working fine.
Now I need to add the batch split information to the outbound delivery that is already created. I've been trying to use BAPI_OUTB_DELIVERY_CHANGE but so far with no success. The batch split items just do not appear in my delivery - the best I could do was changing the batch number of the parent item. Is there a way to make this BAPI create the batch split items (90001, 900002, etc)?
Regards,
Joã -
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
Hi Experts, I have the follow delivery:
Item Material Deliv.Qty Un
10 739911 2 PQT
And I want to obtain this:
Item Material Deliv.Qty Un Batch
10 739911 0 PQT
900001 739911 1 PQT ZZ00060
900002 739911 1 PQT ZZ00061
But, after using the Bapi I obtained this:
Item Material Deliv.Qty Un Batch
10 739911 1,372 PQT
900001 739911 0,314 PQT ZZ00060
900002 739911 0,314 PQT ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item Deliv.Qty
10 0
900001 1
900002 1
But I obtained:
Item Deliv.Qty
10 1,372
900001 0,314
900002 0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGEHey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = header_data
header_control = header_control
delivery = delivery
* TECHN_CONTROL = TECHN_CONTROL
TABLES
* HEADER_PARTNER = HEADER_PARTNER
* HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
* HEADER_DEADLINES = HEADER_DEADLINES
item_data = item_data
item_control = item_control
* ITEM_SERIAL_NO = ITEM_SERIAL_NO
* EXTENSION1 = EXTENSION1
* EXTENSION2 = EXTENSION2
return = return
* TOKENREFERENCE = TOKENREFERENCE
* HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
* HANDLING_UNIT_ITEM = HANDLING_UNIT_ITEM
* PARTIAL_GR_OBJECTS = PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
break cgavin.
*& Form CREATE_BATCH
* text
* <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
DATA: ls_bncom TYPE bncom.
ls_bncom-matnr = ls_item_data-material.
ls_bncom-werks = 'C333'.
ls_bncom-lgort = '3000'.
SELECT SINGLE mtart
FROM mara
INTO ls_bncom-mtart
WHERE matnr = ls_bncom-matnr.
CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
EXPORTING
matnr = ls_bncom-matnr
werks = ls_bncom-werks
check_batch = 'X'
check_material = ''
message_when_auto = ' '
x_bncom = ls_bncom
lock_batch = ' '
IMPORTING
new_charg = p_ls_item_data_batch
EXCEPTIONS
no_material = 1
no_plant = 2
material_not_found = 3
plant_not_found = 4
no_batch_handling = 5
batch_exist = 6
no_number = 7
illegal_batch_number = 8
interval_not_found = 9
object_not_found = 10
interval_overflow = 11
error_automatic_batch_number = 12
cancelled = 13
automatic_batch_num_not_active = 14
OTHERS = 15.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDFORM. " CREATE_BATCH -
Batch Split in case of Stock Transport Order
Hi all ,
In case of sales order i can find batch split using table KOTH002 where i give application as V ang give customer number. Then based on KNUMH i can get no. of batch splits allowed(CHASP) from KONDH table.
Please let me know how can i get no of batch splits allowed in case of STO.
Thanks in advance.
TaranamHi,
Since you have activated the split valuation for the material system is asking to enter the valuation type.
Check the material master Accounting 1 view whether you have maintained valuation category?
If you want Split valuation, maintain the valuation type in config settings in IMG & extend the material to the respective valuation type.
Hope it helps.
Thanks & Regards, -
Hi, all, I just want to know whether function GN_DELIVERY_CREATE can create Delivery for batch split. If yes, how to do that? Thanks.
I try many times, but unsuccess.Hi Rick,
Can You Please explain How You create delivery with batch split using GN_DELIVERY_CREATE ?
I have got a similar requirement.
~Atul -
Batch splitting for Outbound delivery using BAPI_OUTB_DELIVERY_CHANGE
Hi all,
Let me explain the scenario first.
We are going to create a delivery in SAP with some line items and send it to a non-sap third party WMS. They will pick the goods and send the delivery confirmation back to SAP. In SAP we need to delivery confirmation and PGI.
The problem is when the third Part WMS does a batch split for a particular line item, we need to update the same in SAP and then do the PGI. For this I was trying to use BAPI_OUTB_DELIVERY_CHANGE to create split batches. It is splitting the batches but the overall pick status is becoming B (Partially picked). SO it is not allowing to do the PGI.
Can anyone solve my problemHi Bala,
make sure you are setting...
itemdata-dlv_qty
itemdata-dlv_qty_imunit
itemdata-fact_unit_nom e.g = 1.
itemdata-fact_unit_denom e.g = 1.
Rgds
Glenn -
Inbound Delivery Idoc with batch split then PIC and PGI using DELIVERY03
Dear Experts,
Requirement to split the delivery item then PIC and PGI, while Processing Inbound Idoc using basic Idoc type DELIVERY03
I have searched forum already but it vain. Please advice.
Thanks and Regards,
Thiru.
Moderator message : Spec/requirements dumping not allowed, show the work you have already done. Thread locked.
Edited by: Vinod Kumar on Nov 16, 2011 5:09 PMHello Finbarr
I assume that you do NOT send any (suggested) batches to your warehouse. Otherwise you would have the same problem like we have that the WHSCON cannot overwrite a (suggested) batch.
However, if you just send the quantity per item then the batch split is much simpler than you suggested:
"First E1EDL24 segment:
POSNR 50
MATNR 000000000000602006
MATWA 000000000000602006
CHARG L1519 " <<< first batch
LFIMG 37.000
VRKME CT
"Second E1EDL24 segment:
POSNR 50
MATNR 000000000000602006
MATWA 000000000000602006
CHARG L1880 " <<< second batch
LFIMG 37.000
VRKME CT
Well, and as qualifier we use: E1EDL19-QUALF = 'XYZ' " a dummy
The SAP system is smart enough the realize that these two E1EDL24 segment belong to the same item yet have different batches and, therefore, yield a batch split in the delivery. The system generated the 9xxxxx numbers for this sub-item lines automatically.
Although I believe that it is not possible to change a batch in the delivery using an inbound WHSCON I would appreciate to have a final proof of this assumption. I could imagine that if you first delete the item containing the suggested batch and then add a new item with the actual batch from the warehouse it might works. However, this would require to implement a user-exit which I do not prefer.
Regards
Uwe
PS: It seems I gave an answer to the wrong question (should be EDI (DESADV): Can batches be overwritten by an inbound WHSCON (pick conf)? ) -
Create a Batch split for inbound delivery using IDOC
Hi,
I have an requirement to create Batch splits in the Inbound delivery.
These Inbound deliveries are created using IDOC.
So when the inbound deliveries are created through IDOC the Batch split is not happening.
How can i achieve this through Coding?
Any pointers on this will be highly appreciated.Hi ,
Try this link.
http://wiki.sdn.sap.com/wiki/display/ABAP/Toapplybatchsplitinanoutbound+delivery
Regards
HM -
Cost became doble in profitability reoport when picking using batch split
Hi friends,
When we do picking use batch split, cost(material external price) shows double in profitability report. everything else looks normal.
What did we miss?
Thanks in advance,
LindaDid you check the copy control settings in VTFL? At item level, check the box cumulate cost and test again.
Regards, -
How to use BAPI_INB_DELIVERY_CONFIRM_DEC do batch split
Hi, everyone:
I want to do batch split in inbound or outbound delivery by function.
I found BAPI_INB_DELIVERY_CONFIRM_DEC, but our system is not a Decentralized System and I wandered in so many parameters.
How to use this fuction?
Thanks.Hi Junwen,
Did you call the BAPI_TRANSACTION_COMMIT afterwards?
Before this the data is not saved. After that it is saved.
Regards,
Rob. -
Using BAPI_OUTB_DELIVERY_CONFIRM_DEC for batch split?
Dear All,
I have an existing DO in SAP with one line item.
I would like to use BAPI_OUTB_DELIVERY_CONFIRM_DEC to update the this line item with Batch Split.
For example, the existing line item has a material M001 with quantity 5. I need to update the DO to split this line into two batchs - qty 3 from Batch A and qty 2 from Batch B.
In the BAPI's ITEM_DATA - I filled 3 lines:
Line 1 - DO Number 1014---, Item number 00001, Material Number M001, qty 0
Line 2 - DO Number 1014---, Item number 90001, Material Number M001, qty 3, HIERAR 00001, USEHIERITM 1, Batch Batch A
Line 3 - DO Number 1014---, Item number 90002, Material Number M001, qty 2, HIERAR 00001, USEHIERITM 1, Batch Batch B
I also updated the ITEM_CONTROL with Deliv_NUMB ---, DELIV_ITEM 00001, CHG_DELQTY X, GROSS_WT_FLG X.
I get no errors after calling this BAPI and the RETURN table is empty, yet, the document was not changed!
I did a bapi call via remote and there is a commit work after the bapi call.
Best Regards,
Junwen
Message was edited by: Junwen HuangHi Junwen,
Did you call the BAPI_TRANSACTION_COMMIT afterwards?
Before this the data is not saved. After that it is saved.
Regards,
Rob. -
Update picking quantity in delivery (Batch split items) using function modu
Hi All,
I need to update a picking quantity with zero value in delivery for batch split items (Item numbers start with 900001. etc).I'm trying to use WS_DELIVERY_UPDATE
and SD_DELIVERY_UPDATE_PICKING. I'm passing parameter VBKOK-KOMUE , and all other details, but it is not updating.
I'm able to update delivery quantity of same item with zero value but not picking quantity.
Could you please let me know how to achive this.
Regards
VikramI think the number 900001is mean batch split line item.
example:
In Deivery Note:
Item 10
Batch 900001
Batch 900002
Item 20
Batch 900003
Batch 900004
That right, -
Batch Split for Material which are activated with serial number management
Hello All,
We have requirement where we want batch split to be mandatory during goods reciept with inbound delivery for material which are serial number managed.
Please let me know the possible solution to achive this requirement.
Appreciate your quick response.
BR,
TusharI have resolved this issue by myself. Check out the link where I have briefed how to resolve the issue using bapi BAPI_OUTB_DELIVERY_CHANGE.
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Regards,
Senthil G. -
Need to apply Batch split for deliveries.Please suggest
I had tried to apply batch split for delivery using the function module 'BAPI_OUTB_DELIVERY_CHANGE'.After running the program i get a message saying 'Batch split is done for a decentralised system - WMS' and the delivery can be seen only in display mode where the change is disabled.
Please suggest solution to apply batch split and view it normally.
Points will be awarded for helpful answers
Edited by: venkata on Apr 10, 2008 10:52 AMthanks
-
How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE
Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-base_uom = lw_lips-meins.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-pick_denial = 'X'.
lw_item_data_spl-stge_loc = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_lgort TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
READ TABLE li_lips INTO lw_lips
WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
IF sy-subrc EQ 0.
Passing the delivery details into Item level table
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-batch = w_lqua-charg.
lw_item_data-dlv_qty = w_lqua-verme.
lw_item_data-dlv_qty_imunit = w_lqua-verme.
lw_item_data-base_uom = w_lqua-meins.
lw_item_data-hieraritem = lw_lips-posnr.
lw_item_data-usehieritm = 1.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_control-chg_delqty = 'X'.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-stge_loc = w_lqua-lgort.
lw_item_data_spl-pick_denial = 'X'
Appending work area into internal table to pass as parameter
APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
lw_vbpok, lw_lips.
ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.
Maybe you are looking for
-
My Ipad Mini will no longer connect to wi-fi
My iPad mini will suddenly no longer connect to any wi-fi network. At home all our other iPads and iPhones still work. But this problem one won't recognise the password on my home or any other wi-fi network. I can't even backup the device into iTunes
-
Oracle 8.1.7 on Red Hat 9 Linux?
Hello All, Is it possible to install Oracle 8.1.7 on RedHat Linux 9? I'll use this for development only, not for production. If possible, can we install it using installation instructions for Red Hat 7.3? (Using all the required libraries, etc) Pleas
-
I commonly save my photos, when I have worked on them, as .psd files, and then again as .jpg files. Sometimes - not always - when I have saved the .psd file, and then save it as .jpg it adds the word "copy" to the name. Is there any way I can switch
-
HP 3210 printer to Dell Inspiron 7000 series laptop.
Will HP3210 printer effectively connect to the Dell Inspiron 7000 series laptop? Older model printer works extremely well. What portals/connections will be neede? Thanks!
-
Removing leading spaces in a decimal number
I have a decimal number field of length 28 with 9 spaces.I have to print it right justified and remove the leading spaces.I appreciate if anyone can let me the statement for this