Batch Submission From Application in Debugging Mode

Hi ,
I am submitting a batch program for adding a person in CCB (single threaded, not rerunable ) from submitjob command via command prompt, it is running fine.
But when in debug mode , submitting via application , It creates as many number of person Ids as the number of time it is being run .
e.g.
on first run - One person Id is generated for a person .
on second run - Two person Ids are generated for same person .
on third run - Three person Ids are generated for same person .
and so on..
If anyone has got same issue earlier , Kindly suggest ..

Hi Mishra., thanks for your reply. But i have seen that Global.properties's loggingDebug=true has lesser priority than myComponentName.properties's loggingDebug=false. So, at that situation loggingDebug is being set to false only.. There are many properties files like that which is hard to change all properties files' loggingDebug to true..
If there is any other way to turn on loggingDebug to true, please post it..
Thanks for sincere reply,
Vishnu & Nithin Kayithi

Similar Messages

Android Emulator get hangs on starting the application in debug Mode

I have deployed the application on Android Emulator in debug mode but on starting the app it get hangs. I have set the Java Debugging to true in the cvm.properties file and also started Java debugger from JDev before launching the ADF Mobile app on android emulator. Can any body help me to figure out the problem why the emulator gets hang on starting the application in debug Mode.

Hi, after setting the debugging = true, you would also need to start the JDeveloper debugger and configure it for remote debugging. Shay has a blog article that should help.
The emulator is hung while trying to connect to the JDeveloper debugger.
https://blogs.oracle.com/shay/entry/debugging_adf_mobile_apps_on
Thanks,
Joe Huang

Running applications in debug mode in JDeveloper

Hi All,
I have created a simple spring portlet and have consumed it on a webcenter application. The portlet throws an exception. Now I want to run my portlet in debug mode.
Both webcenter application and portlet producer are running on the jdeveloper integrated server.
Can any one help me out mentioning steps to run the portlet and the portal app in debug mode.

Some info can be found in this thread in JDev forum: JDeveloper remote debugging OC4J
However, it is based on 10g and OC4J. Still, I believe, the overall concept can be used.

Error in running flex application in debug mode

Hi, my
Failed to connect; session timed out.
Ensure that:
1. You compiled your Flash application with debugging on.
2. You are running the debugger version of Flash Pl

Hi Chandrasekar,
i have a very simple application with a iview. This iview contains a startpoint and a form view with one checkbox field - also no BI-Query included.
But we have the same problem of our complex models too.
Greetings

Cannot run the JNI application in debug mode in eclipse

Hi ,
I have created a C++/Java project in Eclipse on windows XP.
I can run the app. but I cannot debug it. I get the following error.
Failed to connect to remote VM. Connection refused.
java.net.ConnectException: Connection refused: connect
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
java.net.Socket.connect(Socket.java:452)
java.net.Socket.connect(Socket.java:402)
java.net.Socket.<init>(Socket.java:309)
java.net.Socket.<init>(Socket.java:124)
org.eclipse.jdi.internal.connect.SocketTransportImpl.attach(SocketTransportImpl.java:47)
org.eclipse.jdi.internal.connect.SocketAttachingConnectorImpl.attach(SocketAttachingConnectorImpl.java:103)
org.eclipse.jdt.internal.launching.SocketAttachConnector.connect(SocketAttachConnector.java:131)
org.eclipse.jdt.internal.launching.JavaRemoteApplicationLaunchConfigurationDelegate.launch(JavaRemoteApplicationLaunchConfigurationDelegate.java:75)
org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:569)
org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:788)
org.eclipse.debug.internal.ui.DebugUIPlugin$6.run(DebugUIPlugin.java:955)
org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)
I compiled my C program with :
 options[0].optionString = "-Xdebug";
 options[1].optionString = "-Xnoagent";
 options[2].optionString = "-Djava.compiler=NONE";
 options[3].optionString = "-Djava.class.path=.";
 options[4].optionString = "-Xrunjdwp:transport=dt_socket,address=8888,server=y,suspend=y";
In the debug window in eclipse i have created a new config. under remote java application. I have set the connect tab = myproject.
Connection type = Standard(socket attach) and connection properties: host = localhost , port=8888.
Any help?

It looks like you are doing basically the same thing as we are doing, and it seems to work for us. Do you see a message from the JVM that says:
Listening for transport dt_socket at address: 8888
The one strange thing that we are seeing is if we throw an exception in Java and clear it in C++ (using ExceptionClear) the subsequent entry into the eclipse debug session behaves very strange.
Anyway, here is what we are doing:
J2SE 5.0
Eclipse Version: 3.1.0 Build id: I20050401-1645
jvmOptions[0].optionString = "-Djava.compiler=NONE";
jvmOptions[1].optionString = (char *)classPath.c_str();
jvmOptions[2].optionString = "-Xdebug";
jvmOptions[3].optionString = "-Xnoagent";
jvmOptions[4].optionString = "-Xrunjdwp:transport=dt_socket,address=8888,server=y,suspend=n";
jvmOptions[5].optionString = "-verbose:jni";
memset(&vm_args, 0, sizeof(vm_args));
vm_args.version = JNI_VERSION_1_4;
vm_args.nOptions = JNI_ARG_SIZE;
vm_args.options = jvmOptions;
vm_args.ignoreUnrecognized = JNI_TRUE;
The eclipse remote java application is the same as your:
Connection type = Standard(socket attach)
Connection properties: host = localhost , port=8888.

Report deployed on production server show different data from that in debug mode

Hi,
i have created a report that use temporary tables and when i get the preview on Management Studio show some data, but when i deploy the same report on the production server i see that the data is different!!!!
To check this issue i create a simple table on which i transfer the results data before to show it on the report and with my surprise the number of rows of the production execution is less than the debug execution!!!!
Notice that i use the same value for the report parameters.
Any idea?
Thanks a lot!!!

Hi ,
Check in your solution folder and try to find .data file.
Delete the data .Data file on the same name of your report and run the report from SSMS.
Check the below link on clearing report cache
http://jasonfaulkner.com/ClearDataCacheBIS.aspx
Best Regards Sorna

Application in debug mode?

I want to look at some shared objects in the Media Server
administration page, but when I click on them I get the error
"Failed to make a debug connection." Does the main.asc have to be
running in the development environment in order to view the
contents of the shared objects?

YEAH! Thanks! That makes things MUCH easier

Forms in debug mode

Hi,
I am able to run my forms in run mode. But, when I try to run my application in debug mode, facing problems. FRM-92101 error is thrown.
Java console shows,
Loading http://157.227.14.178:8889/forms90/java/f90all_jinit.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
oracle.forms.net.ConnectionException: Forms session <3> aborted: unable to communicate with runtime process.
 at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
 at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
 at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
 at oracle.forms.net.HTTPNStream.flush(Unknown Source)
 at java.io.DataOutputStream.flush(Unknown Source)
 at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
Trace level set to 5: basic, net, security, ext, liveconnect ... completed.
Opening http://157.227.14.178:8889/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class
Connecting http://157.227.14.178:8889/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class with no proxy
Opening http://157.227.14.178:8889/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
Connecting http://157.227.14.178:8889/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties with no proxy
Any idea?
Pl help
Priya

Nobody has any suggestions or comments???
Can anyone confirm they have the same issue when running the sample code I provided below?
Can anyone see the contents of a VARCHAR2 index based array when debugging??
Thanks

RBCA_PP_SIF_RUN_PP_TEMPLATE generates spool only in debug mode

Hi
I have developed a PP report based on the templaate RBCA_PP_SIF_RUN_PP_TEMPLATE. The report is a simple selection and is supposed to write to the spool (success or error messages). Using WRITE <text> should write to the spool for every job under this parallel processing.
When I am debugging the code, or simply set a breakpoint (BCADEBUG) and execute, spool appears. But if i simply run the job with same variant (no debugging, no BCADEBUG), the spool does not appear.
Any suggestions why this is happening ans how to generate spool in all modes.
Regards
Vikram

Hi Billy,
this is nasty.
My strategy for this situation would be to start 2 browsers.
In 1 browser session I use the Apex Application Builder and in the other (in private/ incognito) browser I run the application in debug mode.
The debug information can be viewed in the Application Builder using the Utillities or by using the URL to the debug screen directly like so
http://localhost:8888/pls/apex/f?p=4000:19:<APP_SESSION>:::RIR,19:IR_APPLICATION_ID,IR_PAGE_ID:<APP_ID_OF_APP_TO_DEBUG>,<PAGE_TO_DEBUG>regards,
Erik-jan

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

Firefox thinks Adobe Flash Plugin has crashed when running in debug mode! How do i get arround this?

When testing my flex application in debug mode, my debug session is closed every time because Firefox thinks the flash plug-in has crashed.
== This happened ==
Every time Firefox opened
== Firefox was updated with plugin-crash redundancy

You can also set the pref dom.ipc.plugins.timeoutSecs to -1 to disable the timeout.

Regarding Exception in Debug mode.

Hi All,
when i am starting Debugger,
it is giving an error like:-
Exception occured during creating launch configuration tabd.
reason:-No tab group define for launch configuration type com.sap.ide.webdynpro.projecrbrowser..launch.configtype.debug
Any idea?
how to correct it?

Hi, 
Did you check in your plug ins first if that com.sap.ide.webdynpro.projecrbrowser is avail or not. 
how to check this? 
Otherwise in technically server mode should be in debug mode and launch your application in debug mode I Mean to say go run-debug-create new web dynpro application and select your project and webdynpro application and checked the create and deploy the archive and click on run then it will wok 
The server mode is ON. While launching my application in debug mode, i am getting this message. it won't allow to create or edit configuration

JDev in Debugging Mode

Hi,
Im running the application in debug mode. after which i updated a java file and compiled it. Now when i reload the page(didnt restart the server instance), i am getting classnotfound exception.
Is this a standard behaviour of Jdev or when i reload the page should the latest file should get picked?
Thanks,
Viswanath

Timo,
Sorry in my previous post ,i meant to say that i have to rerun the application.Should i rerun the application even if i change any property in .jspx page?
When i change the existing java file and reopen the target url, sometimes it picks the latest file and sometimes it gives IllegalStateException.
Could you please explain what changes get reflected immediately and when should i rerun the application.
In one of the forum post there was suggestion to set the below property. When i tried this application didn't recognize the class files even when i rerun.
Tools->Preferences->Run->WebLogic and setting Select Hot Class Reload Policy to Fast Swap
Thanks,
Viswanath

How to start weblogic in debug mode from BEA WebLogic Eclipse plugin

I have a problem making weblogic work with eclipse3.1. I am using a BEA WebLogic plugin to handle weblogic (start/stop) from eclipse. However I want to debug my application and I am unable to figure out a way to start my weblogic in debug mode like we do in WSAD. I tried using some other plugins also but no luck. Please suggest me a plugin to handle this or any other way of debugging my application from eclipse. I am using weblogic 8.1.

Hi,
Dev Environment
weblogic eclipse plugin 2.0 beta
weblogic server 8.1
eclipse 3.1.1
Created a server that i would like to deploy my EJB so that i can put break points on my EJB in eclipse.
How do i do it?
I managed to deploy an ear (containing the ejb) directly to the weblogic installed folder and it deployed the ejb. But the breakpoint set in eclipse is not triggered. Of course in this case as weblogic server is running the .ear file deployed manually in the file system.
Any help is appreciated.
Mel

Is it possible to extract a VI from an executable which has debug mode enabled?

It is a curiosity question from a client.
Is it possible to extract a VI from an executable which has debug mode enabled?
Since the block diagram would not be in edit mode.... Is it possible to "peer" into the executable, look at a VI and recover the block diagram? This owuld be for a deleted VI that is part of an executable which had debug mode enabled..
Did anyone try this?
Curious..

Extract VIs from an EXE? No problem. Even if debugging isn't enabled you can extract VIs, they just won't have block diagrams, and may not have front panels depending on if they were removed in the EXE making process.
Attached is an example project for making an EXE, the EXE itself, and a VI for extracting VIs from the EXE. The code is quite primative and it was just meant to demonstrate how this can be done.
To extract the Main.vi from the Application.exe, run Extract Main.vi from EXE.vi, provide the path to the EXE and the path to where the VI should be saved and then run the VI. This VI will set keys in the INI file for the application, then run th EXE. Then it opens an application reference to the EXE, then opens a VI reference to Main.vi. Then it aborts Main.vi, and extracts it.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Test EXE Extract.zip ‏763 KB

Batch Submission From Application in Debugging Mode

Similar Messages

Maybe you are looking for