Batching 837P error with extended validation

I am batching a 837P (multiple) using BizTalk 2010. If I enable Extended validation in the agreement the batched message fails the send pipeline for the following 'Error details: Unable to read the stream produced by the pipeline. Details:
There was no XML start tag open' From the looks of it the message has the following BOM (EF BB BF). Upon emoving the Extended validation the batched 837 is created by the send port.
Path;
Receive file -> map to 837p -> write to folder using edi send (linked to party) -> edi receive with batching flag -> edi batching -> release batch -> write to final locationr using edi send (linked to party, filter to batched message)
With extended validation the initial 837p before batching are created just fine.
Any help would be greatly appreciated.
Thanks
Tom

Writing the unbatched 837s seemed to be the easiest option to add batching to the solution. And we have other batching applications that follow the same (820)
Thanks

Similar Messages

Error with extended characters

hi i have a problem with extended characters and it only happens when i have an attachment with the mail
MimeBodyPart bp = new MimeBodyPart();
String content = "� � � � � � � � � � � � �� ";
bp.setContent( content, "text/plain; charset=UTF-8" );
mp.addBodyPart( bp );
//code for adding a attachment is added to the mp using MimeBodyPart
msg.setContent( mp ); // add Multipart
msg.saveChanges(); // generate appropriate headers
ByteArrayOutputStream baos = new ByteArrayOutputStream();
msg.writeTo( baos );msg is a MimeMessage.
Now this msg is stored in a cache and later retrieved using
String s = "";
            java.lang.Object o = msg.getContent();
            if ( o instanceof String )
                s = (String) o;
            else if ( o instanceof Multipart )
                try
                    Multipart mp = (Multipart) o;
                    MimeBodyPart bp = (MimeBodyPart) mp.getBodyPart( 0 );
                    s = (String) bp.getContent();
                catch ( Exception e )
                    cLog.error(e.getMessage(),e);
            }now s contains "� ��  � � � � � � � � � � �� " which is wrong.
This has been bugging me for a couple of days now.
could anyone please give a solution.
Many Thanks in advance

Using these literal non-ASCII characters in the string constant might
look great in your editor but might not be giving the correct Unicode
values. Try replacing the special characters with Unicode escapes
(\u####).
If that doesn't work, step through the original string and print out
each character as an integer. Then do the same for the string you
fetch from the message. Compare the integer values. If they're
not the same, post the details. If they are the same, the problem
is most likely in how you're displaying the characters you read
from the message.

Blatent error with Schema Validation Mode

I'm using the XDK v10 Beta and am having severe issues with what I consider to be the valid addition of a node and what the document considers to be valid.
If I use the XMLElement.canAppendChild() method, often false it returned even when it is allowable. If I ignore the results of this and use XMLElement.appendChild() method I am thrown a "DOM error 16" (bear in mind that DOM errors are on a scale of 0-15...).
oracle.xml.parser.v2.XMLDOMException: dom error 16 occurred
at oracle.xml.parser.v2.XMLNSNode.appendChild(XMLNSNode.java:509)
Can anybody let me know if this is a known issue - from my experience the only situation in which this does NOT occur is if you are appending a child element to the root of the document.
Thanks

Further to what I have written above, if I use:
XMLDocument.setContinuousValidityChecking(false);
XMLElement.appendChild(newChild);
XMLDocument.setContinuousValidityChecking(true);
System.out.println(XMLDocument.getContinuousValidityChecking());
I get the output true with no exceptions thrown.
This implies that the addition has not violated any validity checking rules, however without turning continousValidityChecking on and off I am informed that this addition is illegal.
If you need a more detailed test-case (albeit in whatever form) please let me know.
Thanks

Internal Server Error while sending mail with extended property

I am using EWS Managed API. I just started fiddling with Extended properties. So I wrote simple code to send a simple mail with extended property attached to it.
Forming the mail part I simply copy pasted from this
MSDN page. For testing purpose I suppressed certificate validations.
This is my complete code:
1 ServicePointManager.ServerCertificateValidationCallback = delegate(object s, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; };
2 service = new ExchangeService(ExchangeVersion.Exchange2007_SP1);
3 service.TraceListener = new TraceListener();
4 service.TraceEnabled = false;
5
6 service.Credentials = new WebCredentials("[email protected]", "password@123");
7 service.Url = new Uri("https://exchng.domain.com/EWS/Exchange.asmx");
8
9 Guid MyPropertySetId = new Guid("{C11FF724-AA03-4555-9952-8FA248A11C3E}");
10
11 // Create a definition for the extended property.
12 ExtendedPropertyDefinition extendedPropertyDefinition = new ExtendedPropertyDefinition(MyPropertySetId, "Expiration Date", MapiPropertyType.String);
13
14 // Create an e-mail message that you will add the extended property to.
15 EmailMessage message = new EmailMessage(service);
16 message.Subject = "Saved with extendedPropertyDefinition of two days";
17 message.Body = "The expiration date is contained within the extended property.";
18 message.ToRecipients.Add("[email protected]");
19
20 // Add the extended property to an e-mail message object named "message".
21 message.SetExtendedProperty(extendedPropertyDefinition, DateTime.Now.AddDays(2).ToString());
22
23 // Save the e-mail message.
24 message.SendAndSaveCopy();
Please find the rest of the question in first reply, as I got "Body must be 4 to 60000 characters long".

Rest of the question:
I am getting below exception (with no nested inner exceptions) on line 24:
An internal server error occurred. The operation failed.
at Microsoft.Exchange.WebServices.Data.ServiceResponse.InternalThrowIfNecessary()
at Microsoft.Exchange.WebServices.Data.ServiceResponse.ThrowIfNecessary()
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalCreateItems(IEnumerable`1 items, FolderId parentFolderId, Nullable`1 messageDisposition, Nullable`1 sendInvitationsMode, ServiceErrorHandling errorHandling)
at Microsoft.Exchange.WebServices.Data.ExchangeService.CreateItem(Item item, FolderId parentFolderId, Nullable`1 messageDisposition, Nullable`1 sendInvitationsMode)
at Microsoft.Exchange.WebServices.Data.Item.InternalCreate(FolderId parentFolderId, Nullable`1 messageDisposition, Nullable`1 sendInvitationsMode)
at Microsoft.Exchange.WebServices.Data.EmailMessage.InternalSend(FolderId parentFolderId, MessageDisposition messageDisposition)
at Microsoft.Exchange.WebServices.Data.EmailMessage.SendAndSaveCopy()
If I comment line number 21, the code works fine and sends the message. So why it fails with extended properties?

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

Action with out validation still showing error messages

Hello, I have a save action on a PopUp thats has the "with out validation" checked but still the error messages are shown... the problem is that y want to validate the fields by myself, not let the framework do it.
The other question I had is, is there a way to show the validation messages from the framework into the popup? because there are showing in the main window.
Thanks.

the problem is the acceptable range is wrong or probably wrong. this is resulting in your download speed being lower than the acceptable range and therefore shown in red
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error durin

I keep getting this error code when trying to download
- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Key not valid for use in specified state. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

"extended network" error with airport express

i have my time capsule set up in my living room as the primary, and since there are several concrete walls in my house, i need to extend the wifi connection in order to get signal from my room which is located at the very end of my house. I've had my airport express placed near the doorway of my room which should be getting a clear signal from time capsule in the living room.
everything works fine for few days, and the blinking amber light started going off on the airport express. and from the airport utility it shows 1 notification on my airport express. It said an error of "extended network", if i choose to ignore it, the indication light turns back to green, but then i wont be able to connect to the internet.
is there some kind of settings need to be adjusted? please help~~~
my settings on airport express:
Router Mode: Off (Bridge Mode)
Connect using: DHCP
Configure IPv6: Link-Local Only

i've tried to plug the airport express literally right next to the time capsule, and it still showing the "extended network" error message. so it can't be the signal strength issue.
Help please....
additonal info:
my time capsule (primary) :
Connect Using - DHCP
Router Mode: DHCP and NAT
DHCP Range: 10.0.1.2 to 10.0.1.200
my airport express (extension) :
Connect Using - DHCP
IPv4 Address: 10.0.1.10
Router Address: 10.0.1.1
DNS Servers: 10.0.1.1
Router Mode: Off (Bridge Mode)

HELP! Run-time Error with this code.

I'm having problem with the code below. But if I were to remove the writer class and instances of it (writeman), then there are no problems. Can some1 pls tell me why the writer class is giving problems. Btw, no compilation errors, only errors at run-time..........
import java.applet.*;
import java.awt.*;
import java.awt.event.MouseListener;
import java.awt.event.*;
public class HelloWorld extends Applet
public static String MyString = new String("Hello");
Graphics f;
public void init()
Changer Changer1 = new Changer();
writer writeman = new writer();
setBackground(Color.red);
setForeground(Color.green);
addMouseListener(Changer1);
writeman.paintit(f);
public void paint(Graphics g)
g.drawString(MyString,10 ,10);
public class Changer implements MouseListener
public void mouseEntered(MouseEvent e)
setBackground(Color.blue);
MyString = "HI";
paint(f);
repaint();
public void mouseExited(MouseEvent e)
setBackground(Color.red);
repaint();
public void mousePressed(MouseEvent e){};
public void mouseReleased(MouseEvent e){};
public void mouseClicked(MouseEvent e){};
public class writer
public void paintit(Graphics brush)
brush.drawString("can u see me", 20, 20);

I assume the exception you are getting is a NullPointerException...
When you applet is loaded, it is initialised with a call to init... the following will then occur...
HelloWorld.init()
writeman.paintit(f)
// f has not been initialised, so is null
brush.drawString("can u see me", 20, 20)
// brush == f == null, accessing a null object causes a NullPointerException!
The simplest way to rectify this is to not maintain your own reference to the Graphics object. Move the writer.paintit(f) method to the HelloWorld.paint(g) method, and pass in the given Graphics object. Also, change the paint(f) call in Changer to repaint(), which will cause the paint method to be called with a valid Graphics object - which will then be passed correctly to writer.
Hope this helps,
-Troy

Code Signing Error with AIR.app on MAC OS

Hi,
I have an application that runs on Windows and MAC. The last release of the application was signed in February of this year without any issues on both of the target patforms. Now, when signing the latest release on MAC I am getting an error.
code object is not signed at all
In subcomponent: Path to application /Contents/Frameworks/Adobe AIR.framework
I am using a DigiCert extended validation token to sign the code.
I relaize this is pretty obscure, but will appreciate any ideas on how to solve this issue.
Best,
C.S.

This is a pretty narrow little niche but hopefully what I've discovered will help someone out...
When signing and air application in which the runtime is embedded, you must sign the Adobe Air executable first.
To do this right-click or control click on the app, e.g. appName.app and choose show package contents. Find the Adobe Air executable in "Contents/Frameworks/Adobe Air.framework. Right-click or control-click the Adobe Air shortcut and coose show original. Right-click or control-click on the Adobe Air exe and select Get info. From the pop-up window copy the path, and use it in the terminal with codesign -s appending a "/Adobe Air" to the end. Once it's signed you can sign the app without an error.
One more thing... Your application won't open on a MAC without a warning and the need to overide the default security settings unless you register as a developer with apple.
I did this and used a MAC certificate to sign Adobe Air and the application.
WHAT FUN!

RMAN Backup error with Symantec Backup Tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AM

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

RMAN error with Symantec tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Core
   Internal error : com.sap.ide.metamodel.core.services.eclipse
   Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
   Method     : computeIdeJarProperties
   Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
   Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TB

Further developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB

Batching 837P error with extended validation

Similar Messages

Maybe you are looking for