BBM voice and video chat

Hello Everyone,
I just bought the bb Z10 and it has been great so far. Yesterday i noticed the bbm video icon had disappeared thus disallowing me to make or recieve a voice or video chat. I have done everything possible to the best of my knowledge including a restart several times. Everyother setting concerning video set-up i have done accordingly. Can someone help out cos this is frustrating

Has that icon disappeared for a certain BBM contact... or all?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Problem with BBM voice and video on Z10

i have problem connecting on my Z10 with BBM voice and video. before it works fine but i think after an update of BBM is not working anymore. the chat sesion works fine.
i have a second Z10 but that one works fine.
any solution ?
THX
Bryan

On your BlackBerry10 device:
Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, try again.
Likewise, ask a BBM contact of yours to tell you if your BBM contact has the green icon for BBM voice/video.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BBM Voice and Video calls not working

Hi!
I'm using BB Z3 OS: 10.3.1 and my friend using BB Z3 OS: 10.2.1, we both are using BBM over wifi and our BBM is upto-date but when i'm dailing call, "Connecting to BBM video service, please wait and try again" error apears, why we unable to make voice or video calls? any one tell me?

The last I read, BBM voice and video is not available in Pakistan.
I believe it is in UAE.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Google voice and video chat plugin seems to not work with Firefox 4

Once login, I click on parameters item then Chat.
In the audio and video chat section my webcam seems not to be detected.
This works well with Firefox 3.6.
Any help is welcome :-)

Hello again,
Seems to be fixed in the Firefox new version (4.0.1).
Best Regards.

Pidgin voice and video chat menus gone!?

I opened pidgin today to find that all the options to start a video chat / voice chat are gone. And the plugin which configures microphone and webcam is also not in the list of plugins.
It is pretty wierd.
I'm using gnome 3.6 with arch linux x86_64 and Pidgin 2.10.6 (libpurple 2.10.6)
. How can I fix this?
Last edited by ebshankar (2012-11-11 07:33:08)

tomk wrote:When was it working last? And what did you do to your system since then?
Just regular system upgrading thats it. I don't remember exactly when these menus are gone. I noticed it today.
I downgraded to pidgin-2.10.6-1 from -2 and now I can see the the plugin. Still doesn't work but it shows this error below it.
Error: undefined symbol: gst_property_probe_get_type
Check the plugin website for an update.
Last edited by ebshankar (2012-11-11 09:28:40)

Audio and video chat application

I would like to create a voice and video chat application,But I haven't way to do this.
if any one have the source code related to voice chat. Please send me an mail.
My mail Id is
[email protected]

Dear gosa,
You can order flash based video voice chat at [http://www.flashcoms.com|http://www.flashcoms.com] They do high quality products.
Hope this information can help you.
Regards,
Serge

Audio and Video Chat

Hello Sir
I would like to create a Audio and video chat application,
if any one have the source code related to voice chat. plz mail it to i need it ,thanks in advance.
my mail id
[email protected]

Welcome to Apple Discussions!
YES! In fact I set up my own PC machine to test. Follow the windows tip section that can be found at: http://www.mvldesign.com/videoconferencetutorial.html
It's also best to make sure your set-up is working correctly by testing with a known mac user that has no issues. This way you can troubleshoot where the issue lies.

Playbook Monumental App Announcements and Kudos List: Facebook App and Video Chat

Here is a list of the latest apps coming to Playbook in May:
1. Facebook App for Playbook (this week - May 3 - 5) and Video Chat (May 2011)
Source: http://www.engadget.com/2011/05/02/blackberry-playbook-to-get-video-chat-and-facebook-apps-in-may/
List of Essential Apps to Download in App World:
a) Slacker Radio (for streaming audio and option to upgrade to premium membership)
b) National Post (offline reading: great for reading news in the subway when wifi is not available)
c) [Post your reply to nominate app]
d) [Post your reply to nominate app]
e) [Post your reply to nominate app]
Chris --- http://www.twitter.com/chrispycrunch

BlackBerry Messenger now available on Playbook through Bridge (for OS6 devices once Bridge is upgraded from AppWorld).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IChat 3.1.8 voice and video not working - thank you

I am runnning iChat AV 3.1.8 and every time I try and connect using the voice or video chat I receive this message: There was a communication error during your chat.
The Details of the report show this:
iChat Connection Log:
AVChat started with ID 171552.
dudnes1: State change from AVChatNoState to AVChatStateWaiting.
0x6100820: State change from AVChatNoState to AVChatStateInvited.
0x6100820: State change from AVChatStateInvited to AVChatStateConnecting.
dudnes1: State change from AVChatStateWaiting to AVChatStateConnecting.
dudnes1: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x6100820: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
2.003876 @:0 type=4 (00000000/0)
[VCSIP_INVITEERROR]
[19]
2.003784 @SIP/SIP.c:2447 type=4 (900A0015/0)
[SIPConnectIPPort failed]
I am in the UK, trying to connect with people back in the states could this be a factor? Other people in my flat dont seem to have a problem connecting however and I've been able to connect to people room to room when I try. I also had this problem in the States connecting from my Mac to a PC for video chat but was able to do so if I used Yahoo Chat instead of iChat.
Any thoughts, ideas, or suggestions would be really apprecaited. Thank you for any help.

http://discussions.apple.com/thread.jspa?threadID=527902
3:42 PM Sunday; November 11, 2007

Welcome to the Voice and Video over WLAN Discussion

Welcome to the Cisco Networking Professionals Connection Wireless Forum. This conversation will provide you the opportunity to discuss issues surrounding Voice and Video over WLAN. We encourage everyone to share their knowledge and start conversations on issues such as bandwidth intensive wireless applications, and any other topic concerning Voice and Video over WLAN.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site!
If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

This is easily done with dial peer statements . The dial peer in your originating router must route the calls to the terminating router first. That would look like :
dial-peer voice xxxxx voip ( the xxxxx is just a tag)
destination-pattern 45... (that would route any 5-digit calls beginning with 45)
session-target ipv4:xxx.xxx.xxx.xxx (ip address of the terminating router)
If digitones are to be dialed after the connection is established, use the statement:
dtmf-relay-h.245-alphanumeric
You could also use a statement to specify the codec to be used:
codec g711ulaw
You would need multiple voip dial peers if the calls were going to different routers based on the dialed digits. If all calls are sent to the same terminating router, use all wild cards in the dest-pattern statement.
At the terminating router configure pots dial peers:
dial-peer voice xxxxx pots
dest-pattern 45...
port x/x (whichever port the call is to be terminated on)
prefix 45 (this re-inserts matched digits which are stripped off by the pots dp)
Repeat for other ports which will receive calls.
Paul

Screen Sharing and video chats don't work

I've been searching this forum for awhile and I haven't found a concrete answer to my problem, so if this question has been answered please excuse me. Ok, So here's my situation am running iChat on Mac OS 10.5.1. Whenever I am using my laptop at my school on the network their, I am able to use both screen sharing and video chat. But when I am at home, I am unable to use either one. It begins to try to start the session, but then i receive a message that tells me that a connection could not be established. I know that I have internet access, but I don't know what could be wrong with it.

After investing far to long in looking at this exact issue on my end, reading the seemingly endless threads on the exact same error, trying all the various tweeks and QT settings, bandwidth limit settings, etc etc. proposed here, I have now solved this problem, and the none of the above were part of the solution.
I have perhaps one of the the most common routers on the market, Linksys WRT54GL.
In a totally unrelated network problem (a printing issue), Linksys tech support advised me to reset my router. There is a small button on the bottom. I depressed it for 30 seconds. Rebooted everything and my printer miraculously worked. Yea, I had to reenter my WAP passkey, router admin password etc., but that took 2 secs. So, what does this have to do with iChat?.... The very next time I tried iChat video and turned on and enabled my camera, the recipient immedialty saw me. No connection error.
Problem solved, for me art least. Not sure if anyone has tried this, but makes sooooo much more sense than the other unApple like suggestions I previous tried. Hope this helps.

Eight-Class Model QoS for voice and video

One of the QoS recomendation in the SRND "Enterprise QoS" is to create a Eight-Class QoS Model utilizing a seperate priority queue for voice and video.
It says that even though you have only one physical priority queue, that LLQ has an implicit policer that allows for time-division multiplexing of the single priority queue. This implicit policer abstract the fact that there is essentially a single LLQ within the algorithm and, thus, allows for the "provisioning" of multiple LLQs.
My question is if anyone has tried this and if there are any limitations on the platforms that can support this "dual-LLQ design."

Design guide which is basically the QoSDesign recommendation bible.
http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
It has a large section for WAN recommendations...while you may not
need to follow one of these Based on my understanding what what you
have for a link (DS3) and what you are trying to accomplish, I
believe the following section would be a good place to start.
- WAN Aggregator QoS Design
- WAN Edge Classification and Provisioning Models
- High Link Speed QoS Class Model
- Eight-Class Model

Has anyone tried installing the Google Voice and Video plugin?

Hi,
I wanted to check out the Hangouts feature at Google+, but I need the Google Voice and Video plugin for that. I tried unpacking the deb package supplied by Google and installing it manually, but the plugin does not work and Firefox just keeps crashing. Could anyone actually get it to work with Arch yet?

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

IM and video chat in RMI ?

Hi there, i wrote a message to JMF but i m not it is relevant with that topic. So added it here.
I am making a instant messaging and video chat application with jmf. For this project , which one is usefull i am not sure. Can anyone help me?
, For instant messaging, Does Tcp/Ip client server suitable?, or just rmi server enough for that?
So both IM and Video chat application what king of design shall i make?
Thanks.

Hi,
Welcome to the  Discussions
The GoogleTalk part of iChat will only Video or Audio Only chat with other iChat Users that have a Jabber or GoogleTalk ID (Googletalk is a Jabber server).
This means NOT to PCs or to anyone logged in to the GoogleMail Chat web page option.
As you may know iChat can have Jabber/Google IDs or AIM valid ones that include Apple IDs ending in @Mac.com or @me.com
You can not do any chat of Any kind between these two types of Buddy Lists.
Not AIM to Jabber or Jabber to AIM buddies even if they are using iChat.
You have not said if you can Video chat (Or Audio only Chat) with anyone.
Your post implies from my reading of it that you also have a AIM valid Screen Name.
iChat uses the same protocol and the same ports to do Video or Audio Only chats no matter which type of Buddy List is used.
In System Preferences > Security > Firewall tab if the Firewall is to be used with iChat it should be set at Allow All (In fact Off) or Allow Specific Apps and iChat added to the list.
As you can Text chat you appear to be past this stage.
To Video chat iChat uses different ports to those used for Text chatting.
These may need to be opened or allowed in your routing device if you cannot Video chat at all.
The best method in terms of Ease and allowing iChat Screen Sharing is to use UPnP in most routers or Port Mapping Protocol to be Enabled in Airport Base Stations.
9:54 PM Saturday; August 14, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

ISight conflict when installing Google Voice and Video driver

After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
Two camera drivers are installed: Google camera 0 and Google camera 1.
Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
However, this is not a solution since I can't use GTalk anymore.
Does Flash Player 10.2 fixes this conflict?
Regards,
Flávio Mikami

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

BBM voice and video chat

Similar Messages

Maybe you are looking for