BCM 2007 error: "To help prevent malicious code from running, one or more objects"

Recently we changed our e-mail accounts around to a new domain name. After this switch, BCM no longer allows adding, editing or any other manipulation of contact records. I get an error message saying "To help prevent malicious code from running, one
or more objects in this form were not loaded."
I have tried clearing the forms cache, uninstalling and reinstalling BCM and even adding the old e-mail address back into the Outlook profile and nothing works.
Is there something I have missed somewhere or am I looking at a complete reinstall of Outlook and BCM?
Jon

Hi Jon
Thank you for the update. It could be another Active X Component - BCM 2007 calls several of them
On thing you could do is run a Process Monitor Log to see if perhaps another component is Blocked. To do that try the following:
1. Close Outlook and as many other programs as possible
2. Download and Extract Process Monitor from here -
http://technet.microsoft.com/en-us/sysinternals/bb896645
3. Start Process Monitor
4. Start Outlook
5. Reproduce the error in BCM
6. Stop Process Monitor by going to the File menu and unchecking "Capture Events"
At this point you can try filtering by clicking the Filter Icon (the Funnel) on the menu bar. Click on the Left Drop down at the top of the Dialog and Select "Path"
For the second dropdown select "Contacts" and then filter on "ActiveX Compatibility" (without the quotes)
in my lab, every GUID under HKLM\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility came up with a result of "Name Not Found"
On your system, are there any are present (the Result Column will show "Success")?
If so, then I would check the Compatibility Flag for that one (Hint - if you right-click on an Entry you can select "Jump To" to open Regedit to that location)
- or -
If you would like for me to take a look at it, in Process Monitor Go to the File > Save Menu and save it as a .PML file. Then send it to me at cts-larrymei at live.com
Note - Please ZIP the file prior to sending it
Thanks!
Larry - MSFT
Larry Meinstein

Similar Messages

Help! "Requested Operation would cause one or more objects to be too small"

I tried to copy several pieces of text I selected and grouped together to another page. They seemed to disapper, so I went back a step. They immediately made my pasteboard gynormous.... that's one problem, but then, when I tried to type on the page I was going to I get this error message, "Requested operation would cause one or more objects to be too small...." and it won't let me type anything on that page. I can type on other pages, but not that one. I shut my computer down, started again, but still it's there. I saved as another document, but still.... can't type anything on the page. I've got a newspaper to get out. eek. Any help would be greatly appreciated.

Nobody can help you without any system info, details about your documents, fonts used and whatnot. From your description it simply sounds like a DPI settings issue...
Mylenium

Please help 'Translate' These codes from AS2 to AS3 for me

Hi, i need help 'translating' these codes from Action Script 2 to Action Script 3. Please Do it for me:
toc    loadText = new LoadVars();
    loadText.load("Curie.txt");
    loadText.onLoad = function(success) {
        if (success) {
            // trace(success);
            Curie.html = true;
            Curie.htmlText = this.Curie;
Please translate it for me, i need it ASAP thanks
Kenneth

Thank you for helping me
Kenneth
Date: Thu, 15 Oct 2009 05:49:14 -0600
From: [email protected]
To: [email protected]
Subject: Please help 'Translate' These codes from AS2 to AS3 for me
Take a look at that:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/migration.html
There is a LoadVars section on that.
There is also a tutorial here:
http://www.republicofcode.com/tutorials/flash/as3externaltext/
Cheers,
CaioToOn!
>

Prevent Scheduled Build from Running for Check-Ins Committed by Build Server

Hi there,
I am using TFS 2013.
I have a scheduled nightly build that runs only when there have been check-ins.
The problem is that my build process checks-out/in a couple files used for custom versioning. This is done under the machine account of the build server.
Even though no check-ins were committed by developers - the scheduled build sees the check-ins done by the build server and thus, executes another nightly build.
Is there a way I can prevent scheduled builds from running if the only check-ins were from the build machine?
Cheers,
Keith

HI Keith,
I don't think we can achieve this kind of conditional trigger from TFS build definition. We had a similar situation so we disabled the TFS build and started the build using Powershell (windows scheduled task). Below is the powershell script. The scripts
gets the history for the day and checks for the user passed as parameter if even one changeset is not by the user the script will queue a build.
Param(
$BuildUser = "Account\ToIgnore",
$TfsUrl = "http://ABCD:8080/tfs/Collection",
$TeamProjectName = "TeamProject",
$BuildDefinitionName = "BuildDefinitionName")
$today = Get-Date
$yestday = (Get-Date).AddDays(-1)
$Daterange = $today.ToString("Dyyyy-MM-dd HH:mm:ssZ") + "~" + $yestday.ToString("Dyyyy-MM-dd HH:mm:ssZ")
$tfsServer = get-tfsserver $TfsUrl
$Changeset = Get-TfsItemHistory -Server $tfsServer -HistoryItem "$/TeamProject/XYZ" -Version $daterange -User $BuildUser -Recurse
$Changeset | Out-File C:\Windows\temp\Output.txt
$TriggerBuild = $False
foreach ($user in $Changeset)
if ($user.Owner -ne $BuildUser)
$TriggerBuild = $True
break
if ($TriggerBuild)
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.Client")
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.Build.Client")
$tfs = [Microsoft.TeamFoundation.Client.TeamFoundationServerFactory]::GetServer($TfsUrl)
$buildserver = $tfs.GetService([Microsoft.TeamFoundation.Build.Client.IBuildServer])
[Microsoft.TeamFoundation.Build.Client.IBuildDefinition] $BuildDefinition = $buildserver.GetBuildDefinition($TeamProjectName,$BuildDefinitionName)
[Microsoft.TeamFoundation.Build.Client.IBuildRequest] $BuildRequest = $BuildDefinition.CreateBuildRequest();
$buildserver.QueueBuild($BuildRequest) | Out-File C:\Windows\temp\Output.txt
Hope this help
Bharath
Regards, Bharath
LinkedIn:

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. Help

Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times These are my warnings
"Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services." [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

Error while generating java client code from wsdl file

I am trying to generate a java client code from WSDL file um_workflowSaveCreateProfile.wsdl which includes um_workflowSaveCreateProfile_interface.wsdl file, so I am keeping both the files in the same folder and trying to generate the client code but it is showing me the below error highlighted .
um_workflowSaveCreateProfile.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="E:/DIPPWF/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:obinterface="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile">
     <import namespace="D:/DIPP/WSDL/um_workflowSaveCreateProfile_interface" location="um_workflowSaveCreateProfile_interface.wsdl"/>
     <service name="OblixIDXML_um_workflowSaveCreateProfile_Service">
          <port name="OblixIDXML_um_workflowSaveCreateProfile_Port" binding="obinterface:OblixIDXML_um_workflowSaveCreateProfile_Binding">
               <soap:address location="http://localhost:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi"/>
          </port>
     </service>
</definitions>
um_workflowSaveCreateProfile_interface.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:oblixxmllocalschema="http://www.oblix.com/OblixXMLLocalSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface">
     <types>
          <xsd:schema targetNamespace="http://www.oblix.com/" elementFormDefault="qualified"
               xmlns="http://www.oblix.com/"
               xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                    <xsd:include schemaLocation="../XMLSchema/common_parameters.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/common_authentication.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/workflowSaveCreateProfile.xsd" />
          </xsd:schema>
          <xsd:schema targetNamespace="http://www.oblix.com/OblixXMLLocalSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:element name="request">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="params">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element ref="oblix:ObWorkflowName"/>
                                             <xsd:element ref="oblix:ObDomainName"/>
                                             <xsd:element ref="oblix:ObWfComment" minOccurs="0"/>
                                             <xsd:element ref="oblix:noOfFields"/>
                                             <xsd:element ref="oblix:AttributeParams"/>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                         <xsd:attribute name="version" type="xsd:string" use="optional"/>
                         <xsd:attribute name="application" type="xsd:string" use="required" />
                         <xsd:attribute name="function" type="xsd:string" use="required" />
                         <xsd:attribute name="mode" type="xsd:string" use="optional"/>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </types>
     <message name="OblixIDXMLInput">
          <part name="authentication" element="oblix:authentication"/>
          <part name="request" element="oblixxmllocalschema:request"/>
     </message>
     <message name="OblixIDXMLOutput">
          <part name="body" element="oblix:Oblix"/>
     </message>
     <portType name="OblixIDXMLPortType">
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <input message="tns:OblixIDXMLInput"/>
               <output message="tns:OblixIDXMLOutput"/>
          </operation>
     </portType>
     <binding name="OblixIDXML_um_workflowSaveCreateProfile_Binding" type="tns:OblixIDXMLPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <soap:operation soapAction="http://www.oblix.com/"/>
               <input>
                    <soap:body use="literal"/>
               </input>
               <output>
                    <soap:body use="literal"/>
               </output>
          </operation>
     </binding>
</definitions>
I am using WSDL2 Java for generating the client code .
Please suggest where am I wrong .
E:\axis2-1.4\bin>WSDL2Java -uri E:\DIPPWF\um_workflowSaveCreateProfile.wsdl -p R
ND -d adb -s -o build\client--http-proxy-host 10.74.93.35 --http-proxy-port 80
Using AXIS2_HOME: E:\axis2-1.4
Using JAVA_HOME: C:\Program Files\Java\jdk1.6.0_02
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
*[ERROR] More than one part for message OblixIDXMLInput*
org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessingException:
More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException
: Error parsing WSDL
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:153)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Caused by: org.apache.axis2.AxisFault: More than one part for message OblixIDXML
Input
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:397)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
... 2 more
Caused by: org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessin
gException: More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363).
Thanks in advance.
akshay

Hello,
Were you able to resolve this issue ?
I am seeing the same issue and at my wits end.
regards
Amit

Help with html code. not running properly once on server

The video works fine in captivate and works once i publish it, but when I try to upload it onto the server it does not. This is my first time using captivate 4, and when I matched the codes from my old movies they were quite different. So I just messed with the code I had and made it lok like the old vodes and it runs fine on the server.
I was wondering if anyone had any ideas on what is going on with the code that it does not work on the server?
Thank you!!!!!
-danielle

Hello Sue. It's very easy actually.
If you have the lastest update of Muse CC from Nov 2013, there is a FREE Muse Library by musegrid.com that you can download from the Adobe Muse Exchange page that does this specifically using Google Analytics. Here is the direct link should you like to check it out:
http://muse.adobe.com/exchange-library/add-google-analytics
Start by "Right Clicking" on the "Master Page Icon" in the "Plan View" and choose "Page Properties" from the list of menu options available.
This will open up the "Page Properties Dialog Box" for the entire site. Once that dialog box is open, paste your code into the "Metadata" tab section (I believe that tab is displayed at default - at least on the Mac it is - I'm pretty sure it's the same on the Windows platform).
All anaytics embed code goes in the <head> tag of an html page (note: it actually says "HTML for <head>" at the top of the embed window area - making it helpful to know you're in the right area). This is also where you would add any <meta> tags too like facebook's OpenGraph code etc.
If using more than one master, included it to all masters. If just using it on a specific page - say like a landing page, just go to that particular page in your site's "Plan View" and paste it there instead.
Incase i get too "wordy" i've attached screen shots of what these should look like.
Good luck Sue!
And congratulations on a nice new computer too - its got "juice".

Search Help for Company Code from Backend

Hi experts,
How can I make a SH for company code from backend system? I already made a SH for account assigments from backend with USAGE_SH_F4 functioanality, but i don't know whether I can use it for Company code or not? And how?
Best Regards,
Mikhail.

I need functionality where I will manually maintain backend system, and then I need bind search help for this backend system with my input field for web dynpro. For Account Assignment I use this: http://scn.sap.com/community/srm/blog/2014/01/08/standard-account-assignment-search-helps-in-custom-srm-developments
But what should I use for company code?

Strange Error when trying to publish code from author instance to publish instance

When I attempt to publish code I get error "Cowardly Refusing to tree-activate "/apps". There are no addtional messages and when I try to package up the same objects and import them, I recieve an minimal message Error Uploading XXX.Zip.
Has anyone run into these messages before?

The tree activation error is built in validation, it will not tree activate a top level directory. You will get the same message if you did /content for example. But if you do /apps/foo it will work.
I don't about uploading error - have you looked at your server logs? It could be a permissions issue or a disk space issue - especially if you package is large.

Need help moving my code from the timeline into classes

Hello everybody,
A few months ago I made a simple flashgame with the help of a tutorial (http://www.flashgametuts.com/tutorials/as3/how-to-create-a-brick-breaker-game-in-as3-part- 1/) as a school assignment. When I turned it in to my teacher, his biggest complaint was that the code was written onto the timeline instead of in seperate classes. I know virtually nothing of programming (dealt with agoraphobia while the classes took place ), so I was wondering if someone could help me move the code into classes.
Here's the complete package for the game: https://www.dropbox.com/sh/xhjuhz04z8g129m/0nSwf1wngu
Thanks!

You will need to learn about classes. I suggest that for the moment you set your actual project to the side--but keep it in mind--and work on some smaller chunks. Do some tutorials and learn a bit. Then try and apply what you have learned to your project.
http://www.untoldentertainment.com/blog/2009/08/25/tutorial-understanding-classes-in-as3-p art-1/
Work on the individual bits and post more specific questions when you run up against them.
It will require shifting your thoughts a bit on how to design and structure things. For me the really key concept is encapsulation--the idea that your classes are self-contained and have very specific routes of communication for receiving and sending information. To achieve this you need to think about methods, properties, and events. If you've done regular timeline coding you probably recognize properties (x, alpha, htmlText, etc.) and events (MouseEvent.CLICKED). Methods is a fancy word for function. So when you do something like myMovieClip.gotoAndStop(5) the gotoAndStop is a method of the MovieClip class and that just means somewhere there is code like this:
function gotoAndPlay(frame:Object, scene:String=null):void{
// code that tells flash how to move the movieclip to a frame
That is a bit of a simplification, but conceptionally it is what you will do for the methods of your classes.

Please, HELP to convert code from AS2 to AS3!!!

there is source code from paint application, thank to human who will convert this code, it's codeimportant for us.
stop();
var arrSloy:Array = new Array();
//Initial
//OnMove
_root.onMouseMove = function() {
          if (checkPole() && onTool) {
                    Mouse.hide();
                    _root.kist._visible = true;
                    _root.eras._visible = true;
                    _root.pen._visible = true;
                    _root.line._visible = true;
          } else {
                    Mouse.show();
                    _root.kist._visible = false;
                    _root.eras._visible = false;
                    _root.pen._visible = false;
                    _root.line._visible = false;
          updateAfterEvent();
//OnMove
//New
_root.panelMane.butNew.onRelease = function() {
          _root.newClip1.removeMovieClip();
          _root.clipMask.removeMovieClip();
          onTool = false;
          Mouse.show();
          _root.pen.removeMovieClip();
          _root.line.removeMovieClip();
          _root.gotoAndStop("newImg1");
_global.XO = null;
_global.YO = null;
_global.WO = null;
_global.HO = null;
//creatNewPalitra
function creatNewPalitra(color:String, w:Number, h:Number) {
          XO = 120;
          YO = 130;
          WO = w;
          HO = h;
          gotoAndStop(51);
          _root.createEmptyMovieClip("newClip1",0);
          newClip1.lineStyle(0,"0xFFFFFF");
          newClip1.beginFill(color);
          newClip1.moveTo(XO,YO);
          newClip1.lineTo(XO+w,YO);
          newClip1.lineTo(XO+w,YO+h);
          newClip1.lineTo(XO,YO+h);
          newClip1.lineTo(XO,YO);
          newClip1.endFill();
          _root.createEmptyMovieClip("clipMask",1);
          clipMask.lineStyle(0,"0xFFFFFF");
          clipMask.beginFill("0xFFFFFF");
          clipMask.moveTo(XO,YO);
          clipMask.lineTo(XO+w,YO);
          clipMask.lineTo(XO+w,YO+h);
          clipMask.lineTo(XO,YO+h);
          clipMask.lineTo(XO,YO);
          clipMask.endFill();
          newClip1.setMask(clipMask);
function checkPole() {
          if (WO == null) {
                    return false;
          if ((_xmouse>=XO && _xmouse<=XO+WO) && (_ymouse>=YO && _ymouse<=YO+HO)) {
                    return true;
          } else {
                    return false;
//New
_root.panelTool.butCursor.onRelease = function() {
          onTool = false;
          Mouse.show();
          _root.kist.removeMovieClip();
          _root.pen.removeMovieClip();
          _root.line.removeMovieClip();
//PEN
creatClip = 10;
_root.panelTool.butPen.onRelease = function() {
          onTool = true;
          _root.attachMovie("pensil","pen",1000000);
          Mouse.hide();
          _root.pen.startDrag(true);
          function drawPen() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleColorLine.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
          _root.pen.onMouseDown = function() {
                    if (checkPole()) {
                              drawPen();
                              pen_draw_flag = true;
                              clip.lineStyle(lineSize,lineColor,lineAlpha);
                              clip.moveTo(this._x,this._y);
          _root.pen.onMouseUp = function():Void {
                    pen_draw_flag = false;
          _root.pen.onMouseMove = function():Void {
                    if (pen_draw_flag) {
                              if (checkPole()) {
                                        clip.lineTo(this._x,this._y);
                              updateAfterEvent();
//BRUSH
_root.panelTool.butkist.onPress = function() {
          onTool = true;
          _root.attachMovie("kister","kist",1000000);
          Mouse.hide();
          _root.kist.startDrag(true);
          function drawKist() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleFill.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
          _root.kist.onMouseDown = function() {
                    if (checkPole()) {
                              drawKist();
                              kist_draw_flag = true;
                              clip.lineStyle(lineSize,lineColor,lineAlpha);
                              clip.moveTo(this._x,this._y);
          _root.kist.onMouseUp = function():Void {
                    kist_draw_flag = false;
          _root.kist.onMouseMove = function():Void {
                    if (kist_draw_flag) {
                              if (checkPole()) {
                                        clip.lineTo(this._x,this._y);
                              updateAfterEvent();
//LINE
_root.panelTool.butLiner.onRelease = function() {
          onTool = true;
          _root.attachMovie("liner","line",1000000);
          _root.line.startDrag(true);
          Mouse.hide();
          function drawLine() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleColorLine.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
                    thisx = thisy=null;
          _root.line.onMouseDown = function() {
                    if (checkPole()) {
                              drawLine();
                              line_draw_flag = true;
                              thisx = this._x;
                              thisy = this._y;
          _root.line.onMouseUp = function():Void {
                    line_draw_flag = false;
          _root.line.onMouseMove = function():Void {
                    if (line_draw_flag) {
                              if (checkPole()) {
                                        clip.clear();
                                        clip.lineStyle(lineSize,lineColor,lineAlpha);
                                        clip.moveTo(thisx,thisy);
                                        clip.lineTo(this._x,this._y);
                              updateAfterEvent();
//ERASER
_root.panelTool.butEras.onPress = function() {
          onTool = true;
          _root.attachMovie("eraser","eras",1000000);
          Mouse.hide();
          _root.eras.startDrag(true);
          function drawEras() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = "0xFFFFFF";
                    lineAlpha = "100";
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
          _root.eras.onMouseDown = function() {
                    if (checkPole()) {
                              drawEras();
                              eras_draw_flag = true;
                              clip.lineStyle(lineSize,lineColor,lineAlpha);
                              clip.moveTo(this._x,this._y);
          _root.eras.onMouseUp = function():Void {
                    eras_draw_flag = false;
          _root.eras.onMouseMove = function():Void {
                    if (eras_draw_flag) {
                              if (checkPole()) {
                                        clip.lineTo(this._x,this._y);
                              updateAfterEvent();
//CURV
_root.panelTool.butCurv.onRelease = function() {
          onTool = true;
          _root.attachMovie("liner","line",1000000);
          _root.line.startDrag(true);
          Mouse.hide();
          anchor1X = anchor2X=controlX=null;
          anchor1Y = anchor2Y=controlY=null;
          onClic = 0;
          function drawCurv() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleColorLine.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
          _root.line.onMouseDown = function() {
                    if (onClic == 0) {
                              if (checkPole()) {
                                        drawCurv();
                                        anchor1X = this._x;
                                        anchor1Y = this._y;
                                        onClic = 1;
                                        _root.attachMovie("point","point1",1000001);
                                        point1._x = anchor1X;
                                        point1._y = anchor1Y;
                    } else if (onClic == 1) {
                              if (checkPole()) {
                                        anchor2X = this._x;
                                        anchor2Y = this._y;
                                        onClic = 2;
                                        _root.attachMovie("point","point2",1000002);
                                        point2._x = anchor2X;
                                        point2._y = anchor2Y;
                    } else if (onClic == 2) {
                              if (checkPole()) {
                                        controlX = this._x;
                                        controlY = this._y;
                                        onClic = 0;
                                        curv_draw_flag = true;
                                        point1.removeMovieClip();
                                        point2.removeMovieClip();
                                        clip.lineStyle(lineSize,lineColor,lineAlpha);
                                        clip.moveTo(anchor1X,anchor1Y);
                                        clip.curveTo(this._x,this._y,anchor2X,anchor2Y);
          _root.line.onMouseUp = function():Void {
                    curv_draw_flag = false;
          _root.line.onMouseMove = function():Void {
                    if (curv_draw_flag) {
                              if (checkPole()) {
                                        clip.clear();
                                        clip.lineStyle(lineSize,lineColor,lineAlpha);
                                        clip.moveTo(anchor1X,anchor1Y);
                                        clip.curveTo(this._x,this._y,anchor2X,anchor2Y);
                              updateAfterEvent();
//STAR
_root.panelTool.butStar.onRelease = function() {
          onTool = true;
          _root.attachMovie("liner","line",1000000);
          Mouse.hide();
          _root.line.startDrag(true);
          function drawStar() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleColorLine.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
          thisx = thisy=null;
          _root.line.onMouseDown = function() {
                    if (checkPole()) {
                              drawStar();
                              star_draw_flag = true;
                              clip.lineStyle(lineSize,lineColor,lineAlpha);
                              thisx = this._x;
                              thisy = this._y;
                              clip.moveTo(thisx,thisy);
          _root.line.onMouseUp = function():Void {
                    star_draw_flag = false;
          _root.line.onMouseMove = function():Void {
                    if (star_draw_flag) {
                              if (checkPole()) {
                                        clip.moveTo(thisx,thisy);
                                        clip.lineTo(this._x,this._y);
                              updateAfterEvent();
//KVADRAT
_root.panelTool.butRecttangle.onRelease = function() {
          onTool = true;
          _root.attachMovie("liner","line",1000000);
          _root.line.startDrag(true);
          Mouse.hide();
          function drawRecttangle() {
                    creatClip++;
                    lineSize = _root.panelProperties.poleSizeLine.text;
                    lineColor = _root.panelProperties.poleColorLine.text;
                    lineAlpha = _root.panelProperties.poleAlphaLine.text;
                    fillColor = _root.panelProperties.poleFill.text;
                    clip = _root.newClip1.createEmptyMovieClip("newClip"+creatClip, creatClip);
                    arrSloy.push(clip);
                    thisx = thisy=null;
          _root.line.onMouseDown = function() {
                    if (checkPole()) {
                              drawRecttangle();
                              kvadrat_draw_flag = true;
                              thisx = this._x;
                              thisy = this._y;
          _root.line.onMouseUp = function():Void {
                    kvadrat_draw_flag = false;
          _root.line.onMouseMove = function():Void {
                    if (kvadrat_draw_flag) {
                              if (checkPole()) {
                                        clip.clear();
                                        clip.lineStyle(lineSize,lineColor,lineAlpha);
                                        clip.beginFill(fillColor,lineAlpha);
                                        clip.moveTo(thisx,thisy);
                                        clip.lineTo(this._x,thisy);
                                        clip.lineTo(this._x,this._y);
                                        clip.lineTo(thisx,this._y);
                                        clip.lineTo(thisx,thisy);
                                        clip.endFill();
                              updateAfterEvent();
//Clear
_root.panelMane.butClear.onRelease = function() {
          for (a=0; a<arrSloy.length; a++) {
                    clip = arrSloy[a];
                    clip.removeMovieClip();
                    delete arrSloy[a];
//Back
_root.panelMane.butBack.onRelease = function() {
          i = arrSloy.length-1;
          clip = arrSloy[i];
          clip.removeMovieClip();
          arrSloy.pop();
Thank you very much!!!

Zhanbolat,
In theory, conversion of this code is not difficult, especially because it is clear what the logic is designed to do. The issue is that you will not have an expected result once only this code is converted in isolation. This puppy uses some other objects that are written in AS2 including entities in the FLA library.
In short, it looks like this application needs a total overhaul at every level in order for it to properly function as an AS3 program.
With that said, although this is, again, not a difficult task, it is unlikely to find someone to do it for free. You may have a better luck if you start conversion yourself and post focused questions as you go.

Help with multi-table mapping for one-to-many object inheritance

Hi,
I have posted on here before regarding this (Toplink mapping for one-to-many object inheritance but I am still having problems mapping my object model to my schema.
Object model
The Person and Organisation objects contain base information and have the primary keys person_id and organisation_id. It is important that there is no duplication of person and organisation records, no matter how many times they are saved in different roles.
There are two types of licenceholder in the problem domain, and the ILicenceHolder interface defines information and methods that are common to both. The PersonalLicenceHolder object represents one of these types of licenceholder, and is always a person, so this class extends Person and implements ILicenceHolder.
The additional information and methods that are required by the second type of licenceholder are defined in the interface IPremisesLicenceHolder, which extends ILicenceHolder. Premises licence holders can either be people or organisations, so I have two objects to represent these - PremisesLicenceHolderPerson which implements IPremisesLicenceHolder and extends Person, and PremisesLicenceHolderOrganisation which implements IPremisesLicenceHolder and extends Organisation.
The model is further complicated by the fact that any single Person may be both a PersonalLicenceHolder and a PremisesLicenceHolderPerson, and may be so several times over. In this case, the same basic Person information needs to be linked to several different sets of licenceholder information. In the same way, any single Organisation may be a PremisesLicenceHolderOrganisation several times over.
Sorry this is complicated!
Schema
I have Person and Organisation tables containing the basic information with the primary keys person_id and organisation_id.
I have tried to follow Donald Smith's advice and have created a Role table to record the specialised information for the different types of licence holder. I want the foreign keys in this table to be licenceholder_id and licence_id. Licenceholder_id will reference either organisation_id or person_id, and licence_id will reference the primary key of the Licence table to link the licenceholder to the licence. Because I am struggling with the mapping, I have changed licenceholder_id to person_id in an attempt to get it working with the Person object before I try the Organisation.
Then, when a new licenceholder is added, if the person/organisation is already in the database, a new record is created in the Role table linking the existing person/organisation to the existing licence rather than duplicating the person/organisation information.
Mapping
I am trying to use the toplink mapping workbench to map my PremisesLicenceHolderPerson object to my schema. I have mapped all inherited attributes to superclass (Person). The primary table that the attributes are mapped to is Person, and I have used the multi-table info tab to add Roles as an additional table and map the remaining attributes to that.
I have created the references PERSON_ROLES which maps person.person_id to roles.person_id, ROLES_PERSON which maps roles.person_id to person.person_id and ROLES_LICENCE which maps roles.licence_id to licence.licence_id.
I think I have put in all the relationships, but I cannot get rid of the error message "The following primary key fields are unmapped: PERSON_ID".
Please can somebody tell me how to map this properly?
Thank you.

I'm not positive about your mappings, but it looks like the Person object should really have a 1:M or M:M mapping to the Licenceholder table. This then means that your object model should be similar, in that Person object could have many Licenses, instead of being LicenceHolders. From the looks of it, you have it set up from the LicenceHolder perspective. What could be done instead if a LicenceHolder could have a 1:1 reference to a person data object, rather than actually be a Person. This would allow the person data to be easily shared among licences.
LicenceHolder1 has an entry in the LicenceHolder table and Person table. LicenceHolder2 also has entries in these tables, but uses the same entry in the Person table- essentially it is the same person/person_ID. If both are new objects, TopLink would try to insert the same person object into the Person table twice. I'm not sure how you have gotten around or are planning to get around this problem.
Since you are using inheritance, it means that LicenceHolder needs a writable mapping to the person.person_id field- most commonly done through a direct to field mapping. From the description, it looks like roles.person_id is a foreign key in the multiple table mapping, meaning it would be set based on the value in the person.person_id field, but the person.person_id isn't actually mapped in the object. Check to make sure that the ID attribute LicenceHolder is inheriting from person hasn't been remapped in the LicenceHolder descriptor to a different field.
Best Regards,
Chris

Strange Error In Windows, Preventing AI CS3 From Opening!!!!!

The following Windows error is something i've been getting on only one computer, just in the past month. Other computers do not experience this problem. i have uninstalled and reinstalled to no avail. Please advise if you have any experience with a similar issue.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Illustrator.exe
Application Version: 13.0.128.0
Application Timestamp: 45fa64db
Fault Module Name: CoolType.dll
Fault Module Version: 5.4.15.1
Fault Module Timestamp: 45dd5915
Exception Code: c0000005
Exception Offset: 000c42e9
OS Version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Micah,
Is reinstalling Windows an option? Or, better still, reverting to a sound setup of the whole main drive, using Maxtor Maxblast.

BCM 2007 error: "To help prevent malicious code from running, one or more objects"

Similar Messages

Maybe you are looking for