BCM payment scheduled in a job

Hello to everyone,
I need to schedule a job for automatic F110 and payment merge creation FBPM1.
I've scheduled a job with the following programs in steps:
1. RFF110S
2. SAPFPAYM_MERGE
I have an issue, I get only the payment proposal in F110 but the payment is not run.
How can I fix this issue? How could I set this job?
Thanks in advance

Hi Tejas,
I solved the issue was related to the fact I've flagged the item proposal in the parameters.
Anyway I have one more question what is better to use the program SAPF110S or the RFF110S? and what is the difference between these?
Thanks in advance

Similar Messages

  • Process of payment scheduling.

    hi,
    I want to understand what is a process of payment scheduling and where we set and which type payment schedul we use in SAP setup .
    Seema
    Edited by: seemacg on Mar 4, 2011 6:29 AM

    Hi seema,
    As posted by SAPFICO it can be scheduled in f110s. This is for scheduling a job in future. You can give the run date on which u want to execute. Other parameters are same as it appears in f110. This is basically used for schedulling a payment due in future. You can check in sm37 tge status of the schedule run.
    Regards

  • Scheduling one background job inside another

    Hi All,
    Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself  from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
    Thanks & Regards,
    Neethu.

    HI,
    Check the job steps in SM36.
    First schedule the Standard job and in the job steps schedule the z report.
    Schedule job in chain

  • How to schedule the back job scheduling

    how to schedule the back job for bdc , can we use it for both call transaction and session method . how to schedule the back job schedulinng for lsmw

    hi,
    Use t-code SM36 for scheduling.
    <b>Do reward.</b>

  • Schedule a daily job using JOB_CLOSE

    Hello,
    I want to schedule a daily job using job_open, job_submit & job_close.
    This job should run everyday at 22:00 hrs.
    What are the parameters I need to set for the FM JOB_CLOSE?
    Thanks,
    A Pothuneedi

    Look at this sample provided by SAP : <a href="http://help.sap.com/saphelp_sm32/helpdata/en/fa/096d8e543b11d1898e0000e8322d00/content.htm">Sample Program: Start-Time Window with JOB_CLOSE</a>
    Sample Program: Start-Time Window with JOB_CLOSE Locate the document in its SAP
    <b>Library structure</b>
    * Submit job: start-time window defined, with periodic repeat and
    * with target system upon which the job is to run.
    * In this case, you must provide start date settings. You can
    * have the job started immediately with a JOB_CLOSE parameter,
    * set the start date yourself, or ask the user with
    * BP_START_DATE_EDITOR.
    * Example: Provide start-date specifications yourself.
    STARTDATE = '19970101'.
    STARTTIME = '160000'.
    LASTSTARTDATE = '19970101'.
    LASTSTARTTIME = '180000'.
    CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
    JOBCOUNT = JOBNUMBER " Job identification: number
    JOBNAME = JOBNAME " and name.
    SDLSTRTDT = STARTDATE " Start of start-time...
    SDLSTRTTM = STARTTIME " window
    LASTSTRTDT = LASTSTARTDATE " Optional: end of...
    LASTSTRTTM = LASTSTARTTIME " start-time window
    PRDMONTHS = '1' " Restart at intervals of
    PRDWEEKS = '1' " the sum of the PRD*
    PRDDAYS = '1' " parameters
    PRDHOURS = '1'
    PRDMINS = '1'
    STARTDATE_RESTRICTION = BTC_DONT_PROCESS_ON_HOLIDAY
    " Restrict job start to work
    " days; don't start job if
    " scheduled on holiday.
    " Other values:
    " BTC_PROCESS_BEFORE_HOLIDAY
    " BTC_PROCESS_AFTER_HOLIDAY
    CALENDAR_ID = '01' " ID of R/3 factory calendar
    " for determining workdays
    TARGETSYSTEM = 'hs0011' " Optional: name of the host
    " system on which the job is
    " to run. Set only if
    " absolutely required.
    " Example: A required tape
    " drive is accessible only
    " from a single host system.
    IMPORTING
    JOB_WAS_RELEASED = JOB_RELEASED " If user has authorization
    " to release jobs to run, job
    " is automatically released
    " when it is scheduled. This
    " field is set to 'x' if the
    " job has been released.
    " Otherwise, the job is sche-
    " duled but must be released
    " by an administrator before
    " it can be started.
    EXCEPTIONS
    INVALID_STARTDATE = 01
    JOBNAME_MISSING = 02
    JOB_CLOSE_FAILED = 03
    JOB_NOSTEPS = 04
    JOB_NOTEX = 05
    LOCK_FAILED = 06
    OTHERS = 99.
    IF SY-SUBRC > 0.
    <Error processing>
    ENDIF.
    Regards

  • Scheduling a background job depending on the output lenght.

    Hi every one,
    I have a small requirement. My client want me to run a program in a foreground if the output is small and should the program in background if the output is large.This has to be achieved through coding. The program downloads the netprices of products. The downloaded file is of .dat format. It is an urgent requirement.
    Guys you would throughly rewarded for your help.
    Thanks,
    Kumar.9886185040.

    Hi Nag
    that is not possible with codeing. To create a schedule a background job for the same program depending on its output is not possible.
    being a programmer you need to decide, how long the code will take to execute.. accordingly you can either schedule or run in foreground. You can make some mandatory fields in the selection screen, so that the output is big mostly.
    see the sample code for the Job scheduling using the fun modules
    IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
    INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
    EXPORTING
    jobname = jobname
    IMPORTING
    jobcount = jobcount
    EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    IMPORTING
    out_archive_parameters = arc_params
    out_parameters = print_params
    valid = valid
    EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params = 2
    invalid_archive_params = 3
    OTHERS = 4.
    IF valid = chk.
    SUBMIT yREP WITH s_kunnr IN s_cust
    AND RETURN
    USER sy-uname
    VIA JOB jobname
    NUMBER jobcount
    TO SAP-SPOOL
    SPOOL PARAMETERS print_params
    ARCHIVE PARAMETERS arc_params
    WITHOUT SPOOL DYNPRO.
    CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
    jobcount = jobcount
    jobname = jobname
    strtimmed = 'X'
    EXCEPTIONS
    cant_start_immediate = 1
    invalid_startdate = 2
    jobname_missing = 3
    job_close_failed = 4
    job_nosteps = 5
    job_notex = 6
    lock_failed = 7
    invalid_target = 8
    OTHERS = 9.
    IF sy-subrc 0.
    * MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    * WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    MESSAGE i029 WITH jobname.
    ENDIF.
    ELSE.
    MESSAGE s000 WITH text-003.
    STOP.
    ENDIF.
    ENDIF.
    Also,
    Yes you can use job functions:
    JOB_OPEN
    JOB_SUBMIT
    JOB_CLOSE
    * You can add multiple steps into one job by using JOB_SUBMIT.
    Regards
    JJ

  • Schedule a background job for a program using ABAP code.

    Hi,
    I have to write a program to schedule a background job for another program.
    Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
    Need it urgently.
    Thanks in advance.
    Sandeep.

    Hi Sandeep,
    Here is the demo program regarding the BDC For the background job.
    report zprprbdc1
           no standard page heading line-size 255.
    include bdcrecx1.
    parameters: dataset(132) lower case.
    ***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
    *   If it is nessesary to change the data section use the rules:
    *   1.) Each definition of a field exists of two lines
    *   2.) The first line shows exactly the comment
    *       '* data element: ' followed with the data element
    *       which describes the field.
    *       If you don't have a data element use the
    *       comment without a data element name
    *   3.) The second line shows the fieldname of the
    *       structure, the fieldname must consist of
    *       a fieldname and optional the character '_' and
    *       three numbers and the field length in brackets
    *   4.) Each field must be type C.
    *** Generated data section with specific formatting - DO NOT CHANGE  ***
    ***data: begin of itab occurs 0 ,
    ***       matnr(20) type c,
    ***       mbrsh(30) type c,
    ***       mtart(30) type c,
    ***       kzsel(20) type c,
    ***       maktx(40) type c,
    ***       meins(5) type c,
    ***       end of itab.
    data: begin of record occurs 0,
    * data element: MATNR
            matnr_001(018),
    * data element: MBRSH
            mbrsh_002(001),
    * data element: MTART
            mtart_003(004),
    * data element: XFELD
            kzsel_01_004(001),
    * data element: MAKTX
            maktx_005(040),
    * data element: MEINS
            meins_006(003),
    * data element: MTPOS_MARA
            mtpos_mara_007(004),
          end of record.
    *** End generated data section ***
    start-of-selection.
    *perform open_dataset using dataset.
    perform open_group.
    **do.
    **read dataset dataset into record.
    **if sy-subrc <> 0. exit. endif.
    call function 'GUI_UPLOAD'
      exporting
        filename                      = 'c:\jitu\bdc\10002.txt'
       filetype                      = 'ASC'
       has_field_separator           = 'x'
    *   HEADER_LENGTH                 = 0
    *   READ_BY_LINE                  = 'X'
    *   DAT_MODE                      = ' '
    *   CODEPAGE                      = ' '
    *   IGNORE_CERR                   = ABAP_TRUE
    *   REPLACEMENT                   = '#'
    *   CHECK_BOM                     = ' '
    *   VIRUS_SCAN_PROFILE            =
    *   NO_AUTH_CHECK                 = ' '
    * IMPORTING
    *   FILELENGTH                    =
    *   HEADER                        =
      tables
        data_tab                      = record
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_READ_ERROR               = 2
    *   NO_BATCH                      = 3
    *   GUI_REFUSE_FILETRANSFER       = 4
    *   INVALID_TYPE                  = 5
    *   NO_AUTHORITY                  = 6
    *   UNKNOWN_ERROR                 = 7
    *   BAD_DATA_FORMAT               = 8
    *   HEADER_NOT_ALLOWED            = 9
    *   SEPARATOR_NOT_ALLOWED         = 10
    *   HEADER_TOO_LONG               = 11
    *   UNKNOWN_DP_ERROR              = 12
    *   ACCESS_DENIED                 = 13
    *   DP_OUT_OF_MEMORY              = 14
    *   DISK_FULL                     = 15
    *   DP_TIMEOUT                    = 16
    *   OTHERS                        = 17
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    loop at record .
    perform bdc_dynpro      using 'SAPLMGMM' '0060'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMMG1-MATNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RMMG1-MATNR'
                                  record-matnr_001.
    perform bdc_field       using 'RMMG1-MBRSH'
                                  record-mbrsh_002.
    perform bdc_field       using 'RMMG1-MTART'
                                  record-mtart_003.
    perform bdc_dynpro      using 'SAPLMGMM' '0070'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSICHTAUSW-DYTXT(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                                  record-kzsel_01_004.
    perform bdc_dynpro      using 'SAPLMGMM' '4004'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    perform bdc_field       using 'MAKT-MAKTX'
                                  record-maktx_005.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MARA-MEINS'.
    perform bdc_field       using 'MARA-MEINS'
                                  record-meins_006.
    perform bdc_field       using 'MARA-MTPOS_MARA'
                                  record-mtpos_mara_007.
    perform bdc_transaction using 'MM01'.
    **enddo.
    endloop.
    perform close_group.
    *perform close_dataset using dataset.
    &*****************Reward point if helpful************&

  • Schedule a background job

    Hi All,
    I have an urgent query here regarding the Bakcground job.
    Let's say I need to schedule a background job on hourly basis to fetch the data.
    If first job runs more than 60 minutes, then will the second job will fetch the data.
    What will happen in this scenario?
    Thanks
    Neeraj Manocha

    My question is............
    Let's say, I have a SAP standard table. In which our transactional data stores. I have also maintained my our database and build a program (i.e. Ztest) to fetch the data from the SAP standard table and store into my own database.
    So I schedule a background job for the program (Ztest) to fetch the data. I schedule this job on hourly basis.
    once first job will be runnig it will create one more instance to run after one hour.
    Here my question is...
    What if first job schedule on 1pm and runs for more than 60 mins (let's say it takes 90 mins to complete)?
    Till what time it will fetch data (either till 1pm or 1pm +90 mins)?
    If it fetch the data till 1pm +90 mins, then when second job will start and from what time it will start to fetch the data.
    Hope this clears.
    Thanks
    Neeraj Manocha

  • HOw to schedule ''landscape fetch' job in Solution Manager???

    HI,
    Can any one please help me in scheduling LAndscape fetch job in solution Manager?
    rEgards,
    fAisal

    Hi Venkatesh,
    Thanks for your reply.
    I checked by executing SLDCHECK. It opened the SLD page successfully. However, before that in the ABAP screen, it gave me error saying that:
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
    The RFC LCRSAPRFC was of type 3 ABAP. It asked me to change it to T (TCP/IP). I did so.
    However, now I get this below error:
    Properties of RFC destination LCRSAPRFC
      RFC host:
      program id:
      gateway host:
      gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping returned exception with message:
    timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout dur
    I even tested this RFC in SM59. It gave the same error.
    CAn you please help me?
    REgards,
    Faisal

  • How to schedule a background Job based on events

    Hi,
    We are on 4.6 C.
    We have a background job that has two ABAP programs.
    We need to start the 2nd ABAP program only after the first one has run successfully.
    If the second ABAP program does not run, the the job should have a status "FINISHED".
    Help appreciated.
    Thanks
    Mala

    Hi,
    How to schedule a background Job based on events,please refer to the follow SAP help:
    You can use events that have already been defined, or you can create new events for scheduling background jobs.
    If you wish to use new events, do the following to implement the event scheduling:
    Define and transport the event as a user event with transaction SM62.
    You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
    If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
    Do this to transport an event:
    Create a transport request.
    Start the editor in the transport request and enter the following:
    R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
    Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event ID’s that you have created.
    Save and release the transport request. Ensure that it is imported into your production system(s).
    To trigger an event, add:
    – the function module BP_EVENT_RAISE to your ABAP program, or
    – the program SAPEVT to your external script, batch file, or program.
    When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
    Schedule the jobs that are to run when your events are triggered.
    You can schedule jobs for one-time start or to be started whenever an event is triggered.
    Regards,
    collysun

  • How to schedule the background job if report have Presentation server files

    Hi All,
    I have searched the forums and found , the way for the scheduling the background job if report selection screen have the presentation server file input.
    1. Using the Open data set method.
    And my client is not OK with Open dataset way, it there any other way to do this, As we are using the EXCEL file.
    Thanks and Regards,
    Bharani

    Hi,
    As said above it is generally not possible. Since your client most obviously doesn't like graphical background I would recomend storing data as till now, but show it with your own report in more userfriendly way. For example:
    - as ALV Grid
    - in excel with use of OLE either as embedded in SAP or new window (check transaction OLE for example)
    - with use of webdynpro
    BR
    Marcin Cholewczuk

  • How to schedule a background job using the Event concept..?

    Hi Folks,
    I have a requirement that, I need a schedule a background job.
    Once after the previous job successful only, new job should get triggered. How to go ahead with this..?
    For Eg, I am scheduling a job called ZTEST periodically for 1 minute. If the job is not get completing with in 1 minute, I dont want to start my new job. Only after the success of my old job, I want my new job to run.
    Waiting for ur replies.
    Regards,
    Savi.

    Hi,
    You can use events that have already been defined, or you can create new events for scheduling background jobs.
    If you wish to use new events, do the following to implement the event scheduling:
    Define and transport the event as a user event with transaction SM62.
    You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
    If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
    Do this to transport an event:
    Create a transport request.
    Start the editor in the transport request and enter the following:
    R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
    Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event ID’s that you have created.
    Save and release the transport request. Ensure that it is imported into your production system(s).
    To trigger an event, add:
    – the function module BP_EVENT_RAISE to your ABAP program, or
    – the program SAPEVT to your external script, batch file, or program.
    When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
    Schedule the jobs that are to run when your events are triggered.
    You can schedule jobs for one-time start or to be started whenever an event is triggered.
    Regards,
    Raj.

  • How to schedule a batch job to generate security audit log (SM20)

    May be this is a repeat question for this forum. Apologize, if it is. Is there a way to schedule a batch job to generate security audit log (SM20) automatically and possibly send a message to SAP Inbox or generate a spool request? Release is 4.6C.
    Regards
    Nirmal

    > May be this is a repeat question for this forum. Apologize, if it is.
    You don't need to apologize. You only need to do a very simple search...
    > Total Questions:  18 (16 unresolved) 
    Perhaps 16 of those 18 questions you have not followed up on could have been spared as well?
    Please do the needfull.
    Cheers,
    Julius

  • How to schedule a crontab job for a script?

    Hi,
    Can anyone help me in this?
    Actually, i want to schedule a crontab job for a script.
    the script needs to check for a file in a diectory.
    When ever a particular file in a directory is created, then i need to run that script. (creation time of file and execution time of script must be same)
    So, how can i do this?
    any suggestions?
    Thanks,
    Suman.

    crontab manual http://linux.about.com/od/commands/l/blcmdl5_crontab.htm
    if you need check files on OS, crontab is good way... to do
    Example: checking trace file older 30 days and remove (00.00 -> every days )
    file.sh:
    ........begin file......
    #!/bin/sh
    find PATH/udump -name '*.trc' -type f -mtime +30 -exec rm {} \;
    ........end file......
    $ chmod 750 file.sh
    $ mv file.sh /home/oracle/file.sh
    -- edit crontab
    $ crontab -e
    0 0 * * * /home/oracle/file.sh
    -- list crontab
    $ crontab -l
    0 0 * * * /home/oracle/file.sh
    good luck

  • How to Schedule SAP background job at OS Level

    Hi All,
    Can Anyone tell me how to Schedule SAP background job at OS Level (unix).
    Regards,
    Anil

    Hi Anil,
    I donu2019t know your requirements, anyway itu2019s possible to setup your SAP job in order to start after an event, and after that you can get the event triggered from the Operating System in the following way:
    - log into you Operating System with the SIDadm user id (at the Operating System level) and go to directory /usr/sap/SID/SYS/exe/run
    - Run the SAPEVT executable as follows:
    sapevt YOUR_EVENT -t pf=/usr/sap/SID/SYS/profile/DEV_DVEBMGS00_server001 nr=01
    This will raise the event, and cause the job scheduled within SAP to execute.
    You can periodically execute this job with crontab.
    Thanks,
    Federico Biavati

Maybe you are looking for

  • XI User map SAP R/3 User

    Hi experts, Its possible, with the same sender agreement and the same bussines service, one xi user to one sap r/3 user in xi? Example: Bussines Service: BS_SendSomething Bussines Service: BS_SAPR3Receive Comunication: BS_SendSomething -> BS_SAPR3Rec

  • Triple byte unicode to utf-16

    I need to convert a triple byte unicode value (UTF-8) to UTF-16. Does anyone have any code to do this. I have tried some code like: String original = new String("\ue9a1b5"); byte[] utf8Bytes = original.getBytes("UTF8"); byte[] defaultBytes = original

  • Airport - denied permission to assign IP addres

    Hi, I have tried to share internet from iMac to my new macbook via Airport on that imac. I did all necesary steps and everything worked fine for like 2days. But unfortunately something happend , and I still dont know what , but its not working now. I

  • Can't remove images from camera canon t4i

     Hello, I have removed plenty of images in the past.  My last set of images rolled over img_9999.cr2.  When I plug the camera into the pc I can see all the images up to img_9999.cr2 and get them off the camera.   I can see images after that on the ca

  • CS5 64bit, W7 64 bit, First print not profiled

    When I send a print to my Epson 3800, the first time I try it the print is ugly and looks un- or incorrectly- profiled.  Idf I resend the same image without touching the print dialogue settings (they're the same as the first print) the print looks gr