BDC on Selection Screen report

Hi Experts,
Is there any norm of NOT using BDC for selection screen reports? Please share your experience if someone had used it and faced issues later.
Thanks,
Chirantan

Hi Chirantan ,
I would advice you to use submit report option instead of BDC.
First capture your selection screen parameters into a selection_table and fill it with suitable data .
Use submit report and there you go......... report is executed.
ALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
            EXPORTING
              CURR_REPORT               = 'ZREPORT'
*         IMPORTING
*           SP                        =
            TABLES
              SELECTION_TABLE           = LT_SELSCREEN
*           SELECTION_TABLE_255       =
*         EXCEPTIONS
*           NOT_FOUND                 = 1
*           NO_REPORT                 = 2
*           OTHERS                    = 3
          IF SY-SUBRC <> 0.
* Implement suitable error handling here
          ENDIF.
* Fill LT_SELSCREEN
          LOOP AT LT_SELSCREEN INTO LW_SELSCREEN.
            CASE LW_SELSCREEN-SELNAME.
*           WHEN OTHERS.
            ENDCASE.
          ENDLOOP.
            SUBMIT ZREPORT
                  USING SELECTION-SCREEN 1000
            WITH SELECTION-TABLE LT_SELSCREEN
            AND RETURN .
Regards ,
Yogendra Bhaskar

Similar Messages

Call a Screen from A selection screen report

Hi Friends,
I developed a report (1. Excecutable) and i am calling a screen say 9000 which is having several subscreens. While i am clicking the BACK button it should come to the same selection screen report. How to do this? We can't use LEAVE SCREEN or LEAVE TO SCREEN 0. Because 9000 screen having the subscreen. If i use LEAVE PROGRAM it won't come to selection screen. Instead it will come out of program.
Please help me.
Thanks and regards
Srikanth. S

hi srikanth,
We can come from screen to selection screen of the report by using -- "LEAVE TO LIST PROCESSING".
If u need some more info plz check below.
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
Reward if it is usful,
Thanks,
Srikanth.A

Selection screen report dump on "start-of-selection "event.

Hello ,
I created report with selection screen . When I run the transaction and hit execute F8 the program is NOT executed at all and transaction ends up on "SAP easy access" screen.
I checked in debugger and I realized that program is executed until the event "start-of-selection" on that line execution stops.
In that moment sy-ucomm = 'CRET'
Although when the program is executed from SE80 ( direct execution ) everything works well in this case sy- ucomm is initial ( no value)
Please advice .
Krsto
at selection-screen.
perform layout_validation .
start-of-selection. - execution stop s on this line
select * from zlabveri

so what did the dump (read it in trans ST22) tell you the problem is? Read the dump and fix the error. Forum participants have no psychic antennae nor can they remote view your dumps

How to add f4 help for a parameter in selection screen (Report)

hai friends
       I am hving a pblm regarding the F4 help in selection screen for a parameter field ,currenly this parameter field is for personnel number , now in f4 help all the personnel numbers r listing ,i need to include the name of the corresponding personnel numbers along with it ,how do i do that .please give me a help.
thankyou

Hai
you first extract personal number and name into one internal table say itab.
THEN CALL THE FM.
AT SELECTION-SCREEN ON VALUE REQUEST FOR P_PARAMETER.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD     = P_PARAMETER
       DYNPPROG     = SY-REPID
      DYNPNR       = SY-DYNNR
      VALUE_ORG    = 'S'
      WINDOW_TITLE = 'Open Quantity'
    TABLES
      VALUE_TAB    = ITAB.

BEx Report Performance with selection-screen input

Hello Gurus,
My Bex report is working fine when the report had run with out PLANT filter in the selection-screen but when report had run with plant in the selection-screen , report running for forever.
Please let me know what I need to do improve the performance.
Saleem.

Hi Saleem, Just a few thoughts;
1. Check the M-table in RSD1 for 0PLANT. In Table View edit any blank or null values. Run the same restrictions you apply in the query at Info provider level > Display Data. If there's any lapse; you can judge where exactly the problem lies.
2. If you are using Infocube & that your master is >20% fact; you can declare the Info object as 'Line Item Dimension'.
3. Create Variants. Esp. if you are running the query for same set of data. Try Variable Preselection: You can restrict both the values + varaiables in the filter level. When you execute the values will be visibly pre-selected in selection screen.
4. As discussed in previous messages, running a SQL trace using RSRT may prove useful.

Problem with checkbox in the selection screen

Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.

Hi d p
             Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M                                        *
*INCLUDE znrpstnd.
Selection Screen                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
            p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                   s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
            p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
             p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'.   " Outbound --> Hide inbound
    LOOP AT SCREEN.
      "IF screen-name = '%BT02011_BLOCK_1000'.
      IF screen-group2 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      "IF screen-name = '%BT01004_BLOCK_1000'.
      IF screen-group3 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path2
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path3
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

How can i display output in the same selection screen?

I've a requirement. Suppose in my selection screen there are three input fields. On the basis of this selection screens input It will display the output in the same selection screen. Can it be possible? .
Can it be possible to modify the default screen no for the selection screen 1000?
Thanks in advance.
Abhijit

Hi Abijit,
Whatever changes made in STANDARD SELECETION SCREEN 1000 or screens generated using 'SELECTION-SCREEN' statements, are not permanent.
It will get back to its original appearance, while you execute again or some time later.
Whenever you get into 'CHANGE' mode of these screens, an information will be displayed as follows ;
Selection screen: Report generation makes screen
changes ineffective
Regards,
R.Nagarajan.

How to display a screen in selection-screen?

hi friends,
I have a requirement. I have one PNP database SELECTION-SCREEN in my report program. And i have created one more screen using screen painter.
Now i hae to display that screen which i created using screen painter under PNP SELECTION-SCREEN.
For ex:
PNP SELECTION-SCREE.
Pernr Number    _______________
Employe Name _______________
Company Code _______________
Payroll Area     ________________
Now after this i have to display my screen which i designed using screen painter.
As shown below.
O In rupees
O In Percentage
   Variance______
Here i specified some fields only. some more fields also there.
For this i did as....
I created a BUTTON in SELECTION-SCREEN. And when the user clicked on this then screen will appear as window.
It's working fine.
It's look like this.
   |More Selections...|                            -
> Button
But,my client required that screen also wants to display directly under PNP SELECTION-SCREEN but not as window and clicking button.
If Any Help.. Plz....
Thanks & Regards,
Shree.

hi prakash,
thanks for ur solution.
but it's not working properly. while changing 1000 screen and activating, it's showing syntax error like this.
while changing:
==> Element PNPS$MCD touches or overlaps other element
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element
While Activating:
Syntax Error in Screen.
Program <myprogram name>
Screen   1000
Position Flow Logic       Line 95
The include block has been used twice.
But, Here i clicked the button "Activate".
Then It's showing messages as this.
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element.
I checked out that Line 95.
There i am specifying my suscreen as this.
CALL SUBSCREEN subscreen1 INCLUDING sy-repid 106.
at end of PBO.
And in PAI.
CALL SUBSCREEN subscreen1.
Finally when i tried to execute it's giving DUMP.
Any solutions..
Thanks & Regards,
Shree.

ALV Grid and return to selection screen

Hello
I have an ALV Grid and when I push a buttom that I program appears another ALV Grid. In this second ALV I try to program different buttoms. When I program the BACK buttom I want to go to selection screen.
I try with CALL SELECTION SCREEN but when I stay in selection screen and push the execute buttom the ALV that I see is the second, not the first. It seems that we don't catch the news selections.
I put rs_selfied-refresh = 'X' after the CALL SELECTION SCREEN but is wrong again.
What can I do????

Hello Silvia
There is a simple trick to return from the second ALV list directly back to the selection screen:
*& Report ZUS_SDN_REUSE_ALV_GRID_DISPLAY
REPORT zus_sdn_reuse_alv_grid_display.
TYPE-POOLS: slis.
DATA:
gt_t001        TYPE STANDARD TABLE OF t001,
gt_knb1        TYPE STANDARD TABLE OF knb1.
DATA:
gs_fcat        TYPE slis_fieldcat_alv,
gt_fcat_t001   TYPE slis_t_fieldcat_alv,
gt_fcat_knb1   TYPE slis_t_fieldcat_alv.
PARAMETERS:
p_bukrs        TYPE bukrs DEFAULT '1000'.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
*     I_PROGRAM_NAME               =
*     I_INTERNAL_TABNAME           =
      i_structure_name             = 'T001'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_INCLNAME                   =
*     I_BYPASSING_BUFFER           =
*     I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = gt_fcat_t001
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK                 = ' '
*     I_BYPASSING_BUFFER                = ' '
*     I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = syst-cprog
      i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
      i_callback_user_command           = 'ALV_USER_COMMAND'
*     I_CALLBACK_TOP_OF_PAGE            = ' '
*     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*     I_CALLBACK_HTML_END_OF_LIST       = ' '
*     I_STRUCTURE_NAME                  = ' '
*     I_BACKGROUND_ID                   = ' '
*     I_GRID_TITLE                      =
*     I_GRID_SETTINGS                   =
*     IS_LAYOUT                         =
      it_fieldcat                       = gt_fcat_t001
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER           =
*     ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_t001
*   EXCEPTIONS
*     PROGRAM_ERROR                     = 1
*     OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
*&      Form set_pf_status
*       text
*      -->RT_EXTAB   text
FORM alv_set_pf_status USING rt_extab TYPE slis_t_extab.
* NOTE: identical to STANDARD_FULLSCREEN with additional button
*       for detail list ('DETAILLIST')
SET PF-STATUS 'STANDARD_FULLSCREEN'.
ENDFORM.                    "set_pf_status
*&      Form alv_user_command
*       text
*      -->R_UCOMM    text
*      -->RS_SELFIELDtext
FORM alv_user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
CASE r_ucomm.
*   Display detail list: all customers for selected company code
    WHEN 'DETAILLIST'.
      IF ( rs_selfield-fieldname = 'BUKRS' ).
        SELECT        * FROM knb1 INTO TABLE gt_knb1
               WHERE bukrs = rs_selfield-value.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
*         I_INTERFACE_CHECK                 = ' '
*         I_BYPASSING_BUFFER                = ' '
*         I_BUFFER_ACTIVE                   = ' '
            i_callback_program                = syst-cprog
            i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
            i_callback_user_command           = 'ALV_USER_COMMAND'
*         I_CALLBACK_TOP_OF_PAGE            = ' '
*         I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*         I_CALLBACK_HTML_END_OF_LIST       = ' '
            i_structure_name                  = 'KNB1'
*       IMPORTING
*         E_EXIT_CAUSED_BY_CALLER           =
*         ES_EXIT_CAUSED_BY_USER            =
          TABLES
            t_outtab                          = gt_knb1
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.
        IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
<b>*       NOTE: when the program logic returns from the 2nd ALV list
*             and exit = 'X' then the program leaves the
*       1st ALV list, too, and returns to the selection screen.</b>
        rs_selfield-exit = 'X'.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "alv_user_command
Regards
Uwe

Selection screen flow logic change not taking affect. Please help!

Hi
   When I am trying to change the selection scren flow logic I get the following message:
Selection screen: Report generation makes screen changes ineffective.
Whatever I am changing is not taking affect in runtime.
Even though I have activated the changed code for the screen
What shall I do resolve this?
Thanks
Gopal

You should not be changing the screen flow logic of a standard selection screen 1000. It will always be regenerated. In order to modify the standard selection screen, you can do this in the AT SELECTION-SCREEN output event and loop at screen and change the attributes.
Loop at screen.
if screen-name = 'P_CHECK'.
    screen-input = '0'.
    modify screen.
endif.
endloop.
Regards,
Rich Heilman

Error in adding selection screen fields

Hi All,,
I am getting error when i add a selection screen parameters in module pool.
I copied stadard program to custom one, when I add an input field to screen it gives information message saying
"Selection screen: Report generation makes screen changes ineffective".
If though if i add the selection screen, when i relogin newly added screeen disappears.
Can any one y this is happening?

Hi,
You can find a lot of posts on the SDN. Please search for them.
[What create docking container on a subscreen?]
[Query Regarding 'cl_gui_docking_container'] are a few

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

Disable text Box On Selection screen

hello guys,
I am making a selection screen report in which i want to disable the text box , when i am selecting a particular radio button.
Kindly, let me know how to do the same.
Thanks & regards.
Kirtish

hi kirtish
if u want to disable the text box on the screen, u need to use the screen table.
see. All fields of the current screen are stored in the system table SCREEN with their attributes.
so when u click on the any element of the screen the sceen table is looped through.
use the following code in at selection screen output .
put the name of the text box in the
ex:
LOOP AT SCREEN.
IF SCREEN-NAME = <FIRST RADIO BUTTON>
(IF p_r1 = 'X'. say p_r1 is your radio button name)
LOOP AT SCREEN.
IF SCREEN-NAME = <text box>
SCREEN-INPUT = OFF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
in case of query please reply.
award if useful
Varun

How to create a report with selection screen that can run in background

Sorry to ask these basic questions but I am knew to ABAP Programming.
To keep it simply, I am attempting to create a report that has a simple parameter driven selections screen with one field. That field takes in a folder path from the user. The user executes the report. The report creates a simply BDC that goes into SE16, gathers data from a table, and exports the results to a text file using the folder path provided. I created a variant for the folder path field in the selection screen hoping to use it while executing the report in the background. The report is not exporting the file as it did when run in the foreground for some reason.
I am wondering what event is triggered when a report is executed in the background. In the foreground (or when I execute the program via SE38->Execute->With Variant) the user needs to execute the program by hitting the execute button once the variant has populated the folder path field. It works then, so I am trying to get the same to work in the background. I am thinking I didn't put the program together correctly to accommodate the running in the background. How can you create a report that can accept user input via variant into a selection screen and then run in the background?
Please, any information would be greatly appreciated.
Thanks you all for reading this!!!

Ok, finally I understand what you're doing. Initially you lost me with the SE16 reference...
Not sure what you're trying to achieve overall, but apart from the fact that you cannot export/download a file to a user's PC via background job (unless you have a mapped network share on the server or something like an FTP server on the user's PC, but both are pretty hypothetical scenarios and unlikely to occur).
Also, the BDC approach to get data via SE16 is pretty awkward. Note that SE16 is guarded by some authorization checks and often users won't have access in production (which might not matter if you intend to always run your program in background via dedicated batch user). However, I have no clue why you wouldn't want to use [open SQL|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_READING.htm] to read the data. You could then save it on the application server or if you really have to get it to the user you can consider e-mailing the file (extracts should be compressed before sending). For the latter you'll find plenty of references here, basically it's the [business communication services|http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/1c5d3aebba4c38e10000000a114084/frameset.htm] that you'd need to look at.

BDC on Selection Screen report

Similar Messages

Maybe you are looking for