Bdc po line items
hai friends,
i getting answer for data format like IN .txt file.
H123,787
I444,666
I333,890
BUT i wants code is like
h
i
i
i
h
i
how will. please write code brifley.
hi konda,
use this command like take variable to pass the value in to variable.
then
write:/ var(1).
write:/var2(2).
Similar Messages
-
BDC For Line Items In Sales Order
Hello,
I have an internal table of line items which i need it to pass it to BDC for sales order line items creation. Can anybody tell me how to do this like the logic which is used to pass the field names. I just have the material number and Quantity to be passed ..
Thanks
VikySee below code for Purchase Order :
report zpochange.
data : i_error like bdcmsgcoll occurs 0 with header line.
data : i_bdcdata like bdcdata occurs 0 with header line.
tables : ekko, ekpo.
data :c1(10) value 'ME22',
c2(1) value ',',c3(10).
data : var1(20). " LIKE EKKO-EBELN.
data : var2 like ekko-ebeln.
data : begin of i_ekko occurs 0,
header(2),
ebeln like ekko-ebeln,
end of i_ekko.
data : begin of i_ekpo occurs 0,
item(2),
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
menge(10), " LIKE EKPO-MENGE,
end of i_ekpo.
data : v like ekpo-ebelp.
data: begin of itab occurs 0,
text(300),
end of itab.
parameters: p_file like ibipparms-path.
*PARAMETERS: PONUMBER LIKE EKPO-EBELN.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
importing
file_name = p_file
start-of-selection.
*SELECT EBELN FROM EKKO INTO TABLE I_EKKO WHERE EBELN = PONUMBER.
SELECT EBELN EBELP MENGE FROM EKPO INTO TABLE I_EKPO WHERE EBELN
*= PONUMBER.
perform get_data.
*LOOP AT ITAB.
WRITE :/ ITAB.
ENDLOOP.
loop at itab.
var1 = itab-text+0(1).
if var1 = 'H'.
*I_EKKO-EBELN = ITAB-TEXT.
split itab at c2 into i_ekko-header
i_ekko-ebeln.
SPLIT ITAB AT ',' INTO I_EKKO-EBELN.
" I_EKPO-EBELP
" I_EKPO-MENGE
" var1.
append i_ekko.
else.
split itab at c2 into i_ekpo-item
i_ekpo-ebeln
i_ekpo-ebelp
i_ekpo-menge.
append i_ekpo.
endif.
*var2 = i_ekpo-ebeln.
MOVE VAR1 TO I_EKPO-EBELN.
MOVE VAR1 TO I_EKKO-EBELN.
APPEND: I_EKPO.
*if not var1 is initial.
split var1 at ',' into i_ekpo-ebelp
i_ekpo-menge.
i_ekpo-ebeln = var2.
append i_ekpo.
*endif.
endloop.
loop at i_ekpo.
write :/ i_ekpo.
endloop.
loop at i_ekko.
perform fill_data. " TABLES I_EKPO.
endloop.
LOOP AT I_EKPO.
WRITE :/ I_EKPO.
ENDLOOP.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
*LOOP AT I_ERROR.
WRITE :/ I_ERROR.
ENDLOOP.
form get_data.
call function 'WS_UPLOAD'
exporting
codepage = ' '
filename = p_file
filetype = 'ASC'
headlen = ' '
line_exit = ' '
trunclen = ' '
user_form = ' '
user_prog = ' '
dat_d_format = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_DATA
*& Form FILL_DATA
text
-->P_I_EKPO text
form fill_data. " tables i_ekpo .
perform bdcscreen using 'SAPMM06E' '0105'.
perform bdcfield using 'RM06E-BSTNR' i_ekko-ebeln.
perform bdcfield using 'BDC_OKCODE' '/00'.
loop at i_ekpo where ebeln = i_ekko-ebeln.
V = I_EKPO-EBELP.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'RM06E-EBELP'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'BDC_OKCODE' '/00'.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'EKPO-MENGE(01)'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'EKPO-MENGE(01)' i_ekpo-menge.
perform bdcfield using 'BDC_OKCODE' '/00'.
*PERFORM BDCSCREEN USING 'SAPMM06E' 0120.
*PERFORM BDCFIELD USING 'BDC_CURSOR' 'RMO6E-EBELP'.
*CLEAR V.
endloop.
perform bdcfield using 'BDC_OKCODE' '=BU'.
call transaction c1 using i_bdcdata mode 'A'
messages into i_error.
refresh i_bdcdata.
endform. " FILL_DATA
*& Form BDCSCREEN
text
-->P_0140 text
-->P_0120 text
form bdcscreen using p_program p_screen.
i_bdcdata-program = p_program.
i_bdcdata-dynpro = p_screen.
i_bdcdata-dynbegin = 'X'.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCSCREEN
*& Form BDCFIELD
text
-->P_0145 text
-->P_I_EKPO_EBELN text
form bdcfield using fnam fval.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCFIELD
I hope same thing for sales order ,i mean both has Table control
Reward Points if it is helpful
Thanks
Seshu -
PROBLEM IN QP01 BDC ( 19TH LINE ITEM IS NOT TAKING)
DEAR ALL,
I am working on a bdc of QP01 for inspection plan, my bdc is working prperly , problem is that in sceen there r 18 lines for line items , but i have 30 line items. after 18 line items no data is picking. and a message is coming no input data is there for screen no 0150. i tried a lot and unable to solve . if anybody can solve my problem . i send u the part of my code.
LOOP AT ITAB.
CHECK ITAB-MATNR = ITAB1-MATNR.
if flag = 1.
** QUALITATIVE **
if itab-QUALITAT = 'X' AND itab-QUANTITAT = ''.
IF I ge 18.
*CONCATENATE 'RQPAS-SEL_FLG(' I ')' INTO SCR.
*perform bdc_field using SCR
X = '17'..
CONCATENATE 'RQPAS-SEL_FLG(' X ')' INTO SCR.
perform bdc_field using SCR
X1 = '18'..
CONCATENATE 'RQPAS-SEL_FLG(' X ')' INTO SCR.
perform bdc_field using SCR
X2 = '340'.
CONCATENATE 'RQPAS-SEL_FLG(' X1 ')' INTO SCR.
perform bdc_field using SCR
PERFORM BDC_DYNPRO USING 'SAPLQPAA' '0150'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RQPAS-QUALITAT(02)'.
PERFORM BDC_FIELD USING 'RQPAS-ENTRY_ACT'
'1'.
i.
PERFORM BDC_FIELD USING 'RQPAS-AB_MKNR'
ITAB-MERKNR .
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
endif.
perform bdc_dynpro using 'SAPLQPAA' '0150'.
perform bdc_field using 'BDC_CURSOR'
'PLMKB-VERWMERKM(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RQPAS-ENTRY_ACT'
'1'.
k = i - 1.
CONCATENATE 'RQPAS-SEL_FLG(' k ')' INTO SCR.
perform bdc_field using SCR
CONCATENATE 'RQPAS-SEL_FLG(' i ')' INTO SCR.
perform bdc_field using SCR
'X'.
***perform bdc_field using 'BDC_OKCODE'
'/00'.
***'=QMLM'.
CONCATENATE 'PLMKB-VERWMERKM(' I ')' INTO SCR.
perform bdc_field using scr "'PLMKB-VERWMERKM(01)'
'DS-TH-01'.
itab-VERWMERKM.
CONCATENATE 'PLMKB-KURZTEXT(' I ')' INTO SCR.
perform bdc_field using scr
itab-KURZTEXT.
regards
banajabut i want to try it out by modifying the existing code.
please provide me guidelines to solve this problem. -
hi abaper's
i have to do BDC for vendor line item i have 250 vendor and 1000 line item for these vendor
so please tell me the procedure.
thanks
pardeepHi,
Check the sample code.
REPORT YJAR_VENDOR_INBOUND02 NO STANDARD PAGE HEADING LINE-SIZE 255
MESSAGE-ID ZABC.
STRUCTURE DEFINITIONS :
TYPES : BEGIN OF TY_SOURCE ,
LIFNR TYPE LIF16 ,
BUKRS TYPE BUKRS ,
EKORG TYPE EKORG ,
KTOKK TYPE KTOKK ,
NAME1 TYPE AD_NAME1 ,
SORTL TYPE AD_SORT1 ,
LAND1 TYPE LAND1 ,
BANKS TYPE BANKS ,
BANKL TYPE BANKK ,
BANKN TYPE BANKN ,
AKONT TYPE AKONT ,
FDGRV TYPE FDGRV ,
WAERS TYPE BSTWA ,
END OF TY_SOURCE ,
BEGIN OF TY_HEADER ,
LIFNR TYPE LIF16 ,
BUKRS TYPE BUKRS ,
EKORG TYPE EKORG ,
KTOKK TYPE KTOKK ,
NAME1 TYPE AD_NAME1 ,
SORTL TYPE AD_SORT1 ,
LAND1 TYPE LAND1 ,
AKONT TYPE AKONT ,
FDGRV TYPE FDGRV ,
WAERS TYPE BSTWA ,
END OF TY_HEADER ,
BEGIN OF TY_ITEM ,
LIFNR TYPE LIF16 ,
BANKS TYPE BANKS ,
BANKL TYPE BANKK ,
BANKN TYPE BANKN ,
END OF TY_ITEM .
INTERNAL TABLE AND WORK AREA DEFINITIONS :
DATA : T_SOURCE TYPE STANDARD TABLE OF TY_SOURCE INITIAL SIZE 1 ,
W_SOURCE TYPE TY_SOURCE ,
W_SOURCE1 TYPE TY_SOURCE ,
T_TARGET TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 1 ,
W_TARGET TYPE BDCDATA ,
T_HEADER TYPE STANDARD TABLE OF TY_HEADER INITIAL SIZE 1 ,
W_HEADER TYPE TY_HEADER ,
T_ITEM TYPE STANDARD TABLE OF TY_ITEM INITIAL SIZE 1 ,
W_ITEM TYPE TY_ITEM ,
I(2) TYPE C ,
FNAM(20) .
UPLOADING FLATFILE TO SOURCE INTERNAL TABLE :
PERFORM SUB_UPLOAD_FLATFILE.
PERFORM SUB_SPLIT_DATA.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
LOOP AT T_HEADER INTO W_HEADER .
REFRESH T_TARGET .
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR' W_HEADER-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-BUKRS' W_HEADER-BUKRS.
PERFORM BDC_FIELD USING 'RF02K-EKORG' W_HEADER-EKORG.
PERFORM BDC_FIELD USING 'RF02K-KTOKK' W_HEADER-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFA1-LAND1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1' W_HEADER-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL' W_HEADER-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1' W_HEADER-LAND1.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFBK-BANKL(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' 'ENTR'.
I = '01' .
LOOP AT T_ITEM INTO W_ITEM WHERE LIFNR = W_HEADER-LIFNR .
CONCATENATE 'LFBK-BANKS(' I ')' INTO FNAM .
PERFORM BDC_FIELD USING FNAM W_ITEM-BANKS.
CONCATENATE 'LFBK-BANKL(' I ')' INTO FNAM .
PERFORM BDC_FIELD USING FNAM W_ITEM-BANKL.
CONCATENATE 'LFBK-BANKN(' I ')' INTO FNAM .
PERFORM BDC_FIELD USING FNAM W_ITEM-BANKN.
I = I + 1 .
IF I GT 5 .
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' 'P+'.
I = '01'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTR'.
ENDLOOP .
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0210'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFB1-FDGRV'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'LFB1-AKONT' W_HEADER-AKONT.
PERFORM BDC_FIELD USING 'LFB1-FDGRV' W_HEADER-FDGRV.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0215'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFB1-ZTERM'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFB5-MAHNA'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0310'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LFM1-WAERS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'LFM1-WAERS' W_HEADER-WAERS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0320'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF02K-LIFNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=YES'.
*perform bdc_transaction using 'XK01'.
*perform close_group.
CLEAR W_HEADER .
CALL TRANSACTION 'XK01'
USING T_TARGET
MODE 'A'.
ENDLOOP .
*& Form SUB_UPLOAD_FLATFILE
THIS SUBROUTINE IS USED TO UPLOAD THE FLATFILE TO SOURCE INTERNAL TABLE
FORM SUB_UPLOAD_FLATFILE .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'E:/FLATFILE.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = T_SOURCE
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SUB_UPLOAD_FLATFILE
*& Form SUB_SPLIT_DATA
THIS SUBROUTINE IS USED TO SPLIT DATA FROM SOURCE INTERNAL TABLE TO
HEADER AND ITEM INTERNAL TABLE
FORM SUB_SPLIT_DATA .
LOOP AT T_SOURCE INTO W_SOURCE .
W_SOURCE1 = W_SOURCE .
AT NEW LIFNR .
W_HEADER-LIFNR = W_SOURCE1-LIFNR.
W_HEADER-BUKRS = W_SOURCE1-BUKRS.
W_HEADER-EKORG = W_SOURCE1-EKORG.
W_HEADER-KTOKK = W_SOURCE1-KTOKK.
W_HEADER-NAME1 = W_SOURCE1-NAME1.
W_HEADER-SORTL = W_SOURCE1-SORTL.
W_HEADER-LAND1 = W_SOURCE1-LAND1.
W_HEADER-AKONT = W_SOURCE1-AKONT.
W_HEADER-FDGRV = W_SOURCE1-FDGRV.
W_HEADER-WAERS = W_SOURCE1-WAERS.
APPEND W_HEADER TO T_HEADER .
ENDAT .
W_ITEM-LIFNR = W_SOURCE-LIFNR .
W_ITEM-BANKS = W_SOURCE-BANKS .
W_ITEM-BANKL = W_SOURCE-BANKL.
W_ITEM-BANKN = W_SOURCE-BANKN.
APPEND W_ITEM TO T_ITEM .
CLEAR W_HEADER.
CLEAR W_ITEM .
ENDLOOP.
ENDFORM. " SUB_SPLIT_DATA
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_TARGET.
W_TARGET-PROGRAM = PROGRAM.
W_TARGET-DYNPRO = DYNPRO.
W_TARGET-DYNBEGIN = 'X'.
APPEND W_TARGET TO T_TARGET.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL SPACE.
CLEAR W_TARGET.
W_TARGET-FNAM = FNAM.
W_TARGET-FVAL = FVAL.
APPEND W_TARGET TO T_TARGET.
ENDIF.
ENDFORM. "BDC_FIELD
****************FLAT FILE FORMAT***********************
1000-56 1000 1000 0001 ABC-01 TC IN US 123445678 123456 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 234567 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345678 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345679 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345670 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345671 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345672 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345673 31000 A1 INR
1000-56 1000 1000 0001 ABC-01 TC IN US 123123123 345674 31000 A1 INR
Regards,
Raj. -
hi friends,
i take header table (ekko) one seperate internal table.
and item data(ekpo) one seperate table.
iam not taken commen fields in both tables.
iam getting data from .txt file all header data and item data into
one file internal table.
iam also getting all data to header internal table and item inyernal table.
my problem is?
this data how will move into recording , please write code brifly,what transaction you want execute for PO
rgds
rajesh -
How to select line items in recording(BDC)
Hi All,
we are trying to Recording QP02 transaction ,we have inputs like material,plant,Group,Group Counter.
after entering these inputs we will get multiful line items(inspection characteristics).we need to check one field for each item.
How can we get this?
Please help me?
Thanks,
Peddi reddy.Hi Kamesh,
Thanks.
After selecting line items i am selecting control indicators Tab.
then Pop up screen called as (Edit characteristic control indicators) will open ,..then just pressing enter..the it will show another pop up ..here i am selecting one field(Long term Inspection)..the process has to do for all line items.
In My program i have copied BDC performs which i got from Recording.
Do i need to change tha performs or will it work?
i tested in foreground with another material .... upto 3 or 4 line items its working fine.after that sytem does.t say anything.
if i need to chage performs please help me . -
How to give line items in flatfile while doing BDC for Table control
Hi all,
I am writing BDC for Multiple line items and Transaction is : FSE5N.
How do i give the data in the flat file. I mean how do we give the multiple line items in flat file , i.e for second line item again we have to header data or not ?
ex:
1015;ALL;demo;kr;INR;01;0001;3000172;100
1015;ALL;demo;kr;INR;01;0001;3000172;200
for first lineitem : 3000172;100
for 2nd line item : 3000172; 200.
header data : 1015;ALL;demo;kr;INR;01;0001.
Thanks in advance
krupaliHii ,
u can give in the same format as u have done in the example.
A B C D E F G H I
1015;ALL;demo;kr;INR;01;0001;3000172;100
1015;ALL;demo;kr;INR;01;0001;3000172;200
and while writing the loop u can give
loop at it_head.
loop at it_head where a = it_head-A and b = it_head-B ..........upto G = it_head-G.
endloop.
endloop.
check this
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Neeraj -
WSo2 BDC to delete line item in table control
Hi all,
My requirement is to delete material from wso2 table control.
The only way to delete a line item in this table control is to select the line in table control and delete it.
The recording doesnt captures any selection of row.
Any input on how to caputre particular row ??
Please dont send me links to work with table control in bdc
Regards
BhanuDaveL wrote:
I am not aware of any way to make the BDC delete the row, other than by running in 'A'-all mode and letting the user step through each screen and delete the rows that should be deleted.
Well , if the user has to run it in "A" all screen mode why a BDC is required
DaveL wrote:
Deleting them from the table control would obviously have no effect upon the database table though, would it....it would just hide a row from view in this particular table control
Really ? Well it will delete it from database too i dont know what makes you think that it wont be deleted from database.
Anways i have figured out how to capture row selection in BDC .
Thanks for your reply it proves nothing i guess -
How to get First line item in Table control for BDC.
Hi,
I have a requirement while creating the return order from the reference Sales order for BOM.
Once I compare the line items and delete the items not to be returned, I want to read the first line item which in fact is header, to make some changes.
How to read this as cursor points to the last line item.
-B S BHi Bsb,
What is exactly unclear to you? =POPO will give a popup screen in which you can enter the order position number. This number will then be on the top of the table which means you can refer to it in BDC with "(01)".
Regards,
John. -
Creation of po with mutiple line items using BDC
Hi Gurus,
Can any body hav notes for creating po's using BDC with multiple line items in transaction ME21. I hav created po for single line item but if i tried to create multiple line items, it ll create multiple po's...
thanks in advance
arunSee the Below Logic for me22 and it is also same for me21
report zpochange.
data : i_error like bdcmsgcoll occurs 0 with header line.
data : i_bdcdata like bdcdata occurs 0 with header line.
tables : ekko, ekpo.
data :c1(10) value 'ME22',
c2(1) value ',',c3(10).
data : var1(20). " LIKE EKKO-EBELN.
data : var2 like ekko-ebeln.
data : begin of i_ekko occurs 0,
header(2),
ebeln like ekko-ebeln,
end of i_ekko.
data : begin of i_ekpo occurs 0,
item(2),
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
menge(10), " LIKE EKPO-MENGE,
end of i_ekpo.
data : v like ekpo-ebelp.
data: begin of itab occurs 0,
text(300),
end of itab.
parameters: p_file like ibipparms-path.
*PARAMETERS: PONUMBER LIKE EKPO-EBELN.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
importing
file_name = p_file
start-of-selection.
*SELECT EBELN FROM EKKO INTO TABLE I_EKKO WHERE EBELN = PONUMBER.
SELECT EBELN EBELP MENGE FROM EKPO INTO TABLE I_EKPO WHERE EBELN
*= PONUMBER.
perform get_data.
*LOOP AT ITAB.
WRITE :/ ITAB.
ENDLOOP.
loop at itab.
var1 = itab-text+0(1).
if var1 = 'H'.
*I_EKKO-EBELN = ITAB-TEXT.
split itab at c2 into i_ekko-header
i_ekko-ebeln.
SPLIT ITAB AT ',' INTO I_EKKO-EBELN.
" I_EKPO-EBELP
" I_EKPO-MENGE
" var1.
append i_ekko.
else.
split itab at c2 into i_ekpo-item
i_ekpo-ebeln
i_ekpo-ebelp
i_ekpo-menge.
append i_ekpo.
endif.
*var2 = i_ekpo-ebeln.
MOVE VAR1 TO I_EKPO-EBELN.
MOVE VAR1 TO I_EKKO-EBELN.
APPEND: I_EKPO.
*if not var1 is initial.
split var1 at ',' into i_ekpo-ebelp
i_ekpo-menge.
i_ekpo-ebeln = var2.
append i_ekpo.
*endif.
endloop.
loop at i_ekpo.
write :/ i_ekpo.
endloop.
loop at i_ekko.
perform fill_data. " TABLES I_EKPO.
endloop.
LOOP AT I_EKPO.
WRITE :/ I_EKPO.
ENDLOOP.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
*LOOP AT I_ERROR.
WRITE :/ I_ERROR.
ENDLOOP.
form get_data.
call function 'WS_UPLOAD'
exporting
codepage = ' '
filename = p_file
filetype = 'ASC'
headlen = ' '
line_exit = ' '
trunclen = ' '
user_form = ' '
user_prog = ' '
dat_d_format = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_DATA
*& Form FILL_DATA
text
-->P_I_EKPO text
form fill_data. " tables i_ekpo .
perform bdcscreen using 'SAPMM06E' '0105'.
perform bdcfield using 'RM06E-BSTNR' i_ekko-ebeln.
perform bdcfield using 'BDC_OKCODE' '/00'.
loop at i_ekpo where ebeln = i_ekko-ebeln.
V = I_EKPO-EBELP.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'RM06E-EBELP'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'BDC_OKCODE' '/00'.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'EKPO-MENGE(01)'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'EKPO-MENGE(01)' i_ekpo-menge.
perform bdcfield using 'BDC_OKCODE' '/00'.
*PERFORM BDCSCREEN USING 'SAPMM06E' 0120.
*PERFORM BDCFIELD USING 'BDC_CURSOR' 'RMO6E-EBELP'.
*CLEAR V.
endloop.
perform bdcfield using 'BDC_OKCODE' '=BU'.
call transaction c1 using i_bdcdata mode 'A'
messages into i_error.
refresh i_bdcdata.
endform. " FILL_DATA
*& Form BDCSCREEN
text
-->P_0140 text
-->P_0120 text
form bdcscreen using p_program p_screen.
i_bdcdata-program = p_program.
i_bdcdata-dynpro = p_screen.
i_bdcdata-dynbegin = 'X'.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCSCREEN
*& Form BDCFIELD
text
-->P_0145 text
-->P_I_EKPO_EBELN text
form bdcfield using fnam fval.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCFIELD
Reward Points if it is helpful
Thanks
Seshu -
BDC to create SO(VA01) for multiple line items
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
[email protected]
Pls help me this is urgent requirement.
Thanks & Regards,
J.LokeshHI,
Instead of using BDC , why dont you make use of BAPI.
As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
*--Logic something like this.
loop at it_exceldata into l_line.
loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
*This will loop at all the same PO#
*collect the data related into corr tables. and append
endloop.
*Now you are outside the loop.
*Call the BAPI to update this SO
delete it_exceldata where bstkd_e eq l_line-bstkd_e.
endloop.
Also pass all the necessary data to header structure ORDER_HEADER_IN
Do not check for Sy-subrc at the end of execution.
Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
Please let me know , if you need more help in this
Gary. -
To Record J1IS BDC For Multiple Line Items
Hi,
Iam trying to record BDC for J1IS transaction.
while recording material document which contains more than 8 line items , Only 8 line items get saved and the rest of the items doesn't get saved ,
But when I do this manually then all the line items get saved,
Can anyone give the remedy for this Problem (to record J1IS for multiple line items).
Thanks in Advance.
Regards,
S.Janani.Hi Janani / Leo
The problem might be that the scroll down functionality after 8 line items is not recorded in your recording.
In order to overcome the issue, you need to check OK__CODE whicle page down and add it in recording after Number of line items are greater than 8.
Please check below link for details:
http://scn.sap.com/thread/1106677
http://scn.sap.com/thread/797827
http://scn.sap.com/thread/2037271
Best Regards,
Sachin -
BDC for multiple line items (VA01)
Hi Experts,
I create a BDC for VA01 transaction for single line item in that now i want to upload multiple line items also with o/p of total no. of records uploaded, no. of records posted and the no. of error records...
Can any body explain with sample code...Hi,
if the flat file is containing header and item records...
first split those records tooo two internal tables header and item..
Loop at header ...
process of recording steps for header....
Loop at item...
here create a varialbe with char 2 .. for index value....
process of item recording steps..
increment the index value by 1....
here u have to pass 'p+' OK_CODE..
Endloop ..(item)
Endloop...(header)
for more info goo through this link...
http://www.sap-img.com/bdc.htm
hope helpful
Raghunath.S -
hi all,
i am developing bdc program to upload multiple line items for ml10.
i am uploading folling fields
spec_no
astyp
txz01,
sort1,
waers,
matkl,
ekorg,
srvpos ' service number
menge. 'quantity
service number and quantity are multiple line items.
i have developed a code which is taking single record only, it is not working for multiple service no and quantity.
include bdcrecx1.
parameters: filename like rlgrap-filename.
data: begin of record,
SPEC_NO(10),
ASTYP(4),
TXZ01(40),
SORT1(20),
WAERS(5),
MATKL(9),
EKORG(4),
NEW_ROW(10),
SRVPOS(18),
MENGE(13),
end of record.
data: itab_program like record occurs 0 with header line.
At Selection Screen
at selection-screen on value-request for filename.
perform query_filename changing filename.
*START-OF-SELECTION
start-of-selection.
*-- Upload flat data to ITAB.
perform upload_to_itab.
*{ chg001 -- modified as per requirement
perform open_group.
loop at itab_program.
perform upload_programs.
endloop.
perform close_group.
FORM UPLOAD_TO_ITAB *
form upload_to_itab.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = filename
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab_program
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
write : 'File opening error.'.
endif.
endform.
FORM QUERY_FILENAME *
--> P_FILENAME *
form query_filename changing p_filename.
data : tmp_filename like filename.
call function 'WS_FILENAME_GET'
exporting
def_filename = filename
mask = ',.txt,.txt.'
mode = 'O'
title = 'Select the file to Upload'
importing
filename = tmp_filename
exceptions
inv_winsys = 01
no_batch = 02
selection_cancel = 03
selection_error = 04.
if sy-subrc = 0.
filename = tmp_filename.
endif.
endform.
*perform open_group.
*& Form UPLOAD_programs
text
--> p1 text
<-- p2 text
form upload_programs.
perform bdc_dynpro using 'SAPLMLSM' '0100'.
perform bdc_field using 'BDC_CURSOR'
'TEMP_SPEC-ASTYP'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'TMP_SPEC-SPEC_NO'
ITAB_PROGRAM-SPEC_NO.
perform bdc_field using 'TMP_SPEC-ASTYP'
ITAB_PROGRAM-ASTYP.
*****************************************************************SCREEN1
perform bdc_dynpro using 'SAPLMLSM' '0200'.
perform bdc_field using 'BDC_CURSOR'
'TMP_SPEC-EKORG'.
perform bdc_field using 'BDC_OKCODE'
'=SRV'.
perform bdc_field using 'TMP_SPEC-TXZ01'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'TMP_SPEC-SORT1'
ITAB_PROGRAM-SORT1.
perform bdc_field using 'TMP_SPEC-WAERS'
ITAB_PROGRAM-WAERS.
perform bdc_field using 'TMP_SPEC-MATKL'
ITAB_PROGRAM-MATKL.
perform bdc_field using 'TMP_SPEC-EKORG'
ITAB_PROGRAM-EKORG.
*****************************************************************END OF SCREEN2
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
*perform bdc_field using 'RM11P-HEADTEXT'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
perform bdc_field using 'BDC_CURSOR'
'ESLL-MENGE(01)'.
perform bdc_field using 'ESLL-SRVPOS(01)'
ITAB_PROGRAM-SRVPOS.
perform bdc_field using 'ESLL-MENGE(01)'
ITAB_PROGRAM-MENGE.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=SAV'.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_transaction using 'ML10'.
endform. " UPLOAD_programs
can any body help me in this regard.
thanks in advance
sivaLoop at itab_program.
< Here will be your BDC Program>
call transaction..... .
endloop.
and all the records in you internal table itab_program will get updated...
Regards.
Jayant
<b>Please award if helpful</b> -
"BDC for multiple line items of PO"
I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
FORM transaction_bdc .
DATA :
v_cnt(2) TYPE n,
v_bst(2) TYPE n,
v_bn TYPE i,
v_bstpo(25),
v_ebtyp(25),
v_menge(25),
v_eeind(25),
v_xblnr(25),
v_xblnr1(25),
v_ebelp(2) TYPE n,
v_ebelpt(2),
v_menge1(11),
v_ebt TYPE i,
v_vebtyp LIKE ekes-ebtyp,
v_eb(2) TYPE n,
v_tcselflag(40),
v_tem(2) TYPE n,
v_correct TYPE i,
v_file TYPE string.
DATA: ls_outtab TYPE tb_struc.
DATA: l_valid TYPE c,
l_locked TYPE c.
CALL METHOD g_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid EQ 'X'.
LOOP AT tb_output WHERE check EQ 'X' .
MOVE-CORRESPONDING tb_output TO itab_output.
APPEND itab_output.
CLEAR itab_output.
ENDLOOP.
IF tb_output-check <> 'X'.
MESSAGE e003 WITH text-004.
ENDIF.
ENDIF.
IF itab_output[] IS NOT INITIAL.
PERFORM open_group.
***looping at purchase order level.
LOOP AT itab_output where ebelp is not initial .
CLEAR v_bn.
CLEAR v_ebt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06E-BSTNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RM06E-BSTNR'
itab_output-ebeln.
***Changing alphanumeric fields and quantity fields to character type**
*v_ebelp = tB_OUTPUT-ebelp.
*clear v_ebelpt.
*v_menge1 = tB_OUTPUT-menge.
*v_ebelpt = v_ebelp.
***End Of Changing**
*Checking for the exact number of the item**
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
v_bst = v_bn + 1.
*End Of Checking**
**Mapping items**
v_tem = 1.
CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=DETA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EKPO-BSTAE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BSTA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_field USING v_tcselflag
'X'.
**Checking weather Confirmation category already exists**
SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
itab_output-ebelp AND ebeln = itab_output-ebeln.
ENDSELECT.
IF sy-dbcnt > 0.
v_ebt = sy-dbcnt.
ENDIF.
v_eb = v_ebt + 1.
**End Of Checking**
**For Line items**
CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
**End**
PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_xblnr.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING v_ebtyp
itab_output-ebtyp.
PERFORM bdc_field USING v_eeind
itab_output-eindt.
PERFORM bdc_field USING v_menge
v_menge1.
PERFORM bdc_field USING v_xblnr
itab_output-xblnr.
**End Of Mappings**
*loop at itab_output.
MOVE-CORRESPONDING itab_output TO ekes.
modify ekes.
MOVE-CORRESPONDING itab_output TO eket.
MODIFY eket.
MOVE-CORRESPONDING tb_output TO ekpo.
MODIFY ekpo.
ENDLOOP.
CALL TRANSACTION 'ME22N'
USING itbdc
MODE 'E'.
commit work.
perform bdc_transaction using 'ME22N'.
**End Of Purchase Order Loop**
PERFORM close_group.
endloop.
endif.Hi Asha,
check the below code once...
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
Regards,
Satya.
Maybe you are looking for
-
Problems while deploying ear file
Hi all, When I am trying to deploy the webdynpro application after packaging it as an ea file it is giving the following exception: <b>Deployment exception : Server los-angeles did not accept login request as admin on port 58818. Details: ERROR: Coul
-
Audio not working when connected to HDTV
I connected my MacBook Pro to my Samsung HDTV LN40D503F6F and also connected an HDMI cable to the TV using Apple mini DVI cable. I tried connecting to both HDMI/DVI 1 and HDMI 2. Video works fine when connected to both the HDMI ports, but the audio d
-
Images in Spry Tabbed Panels Tabs
I am completely new to the Spry options in Dreamweaver and need help customizing the Tabs in the Spry Tabbed Panel. I would like to substitute the text in each tab for a different image in each tab, and have each image change by using behaviors, depe
-
Sun One Java mobile Application start error
Hi, I established sun one java mobile application builder but I coudn not start it . when it come to %27 it show me this messagebox "This application has unexpectedly has caused an ExceptionInInitializerError. This Application will now exit (LAX)" in
-
Problem with PCK 7.1 SP07 JCA Sample Adapter
Hello! I have a Problem with the JCA Sample Adapter in the PCK 7.1 SP07. I will test the Configuration ( http://help.sap.com/saphelp_nwpi71/helpdata/en/f7/0c2441509fa831e10000000a1550b0/content.htm ) . But the receiver channel has a Massage processin