Beginner advise needed on how to find link for app on ipad.

I am an absolute beginner with a recently purchased ipad 2. I have just purchased garageband from the app store but how do I open it? There is no link on my ipad anywhere but when i check settings it says that garageband is installed. Can someone please advise me on how to find link or am i missing somethng really obvious here, cheers.

Look for the Garage Band icon on one of your home screens. Tap on it in order to launch it. Swipe from one screen to the next (swipe to the left with your finger) if you do not see it on the first screen.
If you still can't find it - swipe to the right from your very first home screen and a search feature appears on the screen. Type Garage Band in the text field and search for the app.

Similar Messages

  • DVD MatshitaD-2 LF-D110 Do I need?/how to find driver for, Video..

    I can open/read Cd's ok. Music >itunes ok.
    But when I put in movie DVD the drive runs 30 sec. and the ejects. Does not show on desktop.
    Have looked in applications and find nothing that seems like for this hardware.
    Have tried several searches on Web and @ Panasonic and find no listings for mac, only one for windows.
    Have tried to find driver on this Apple site and cannot or don't know where to look or how. Tried search bar.
    Takes me forever to figure out how to get back into forum, I signed up some time ago. Not easy to find.
    I read some post and they said drivers are not listed for Mac for Matshita, just windows, and may/not work 100%.
    PCI ACARD 6260, ATY,Rage 128, Firewire 400, Mem. 256,128,128,64MB.
    MatshitaD-2 LF-D110 (this is as shown in about this mac)
    Some video (youtube) plays smooth(Quicktime), some starts and stops eventhough download is ahead of play in bar. Some (Microsofttrainsimul.) is stoppy, and pixed in full screen.
    Would like to try to get DVD drive to read to see if can play movies, or do I need to look for a used G5 and with what min. specs.
    I would like to know where to go to learn more about mac hardware etc., something to read?
    Thank You.
    primative
    p.s. I had a Sony DVDRWdrive in but took it out because trouble with music cd's, would not read both channels completely/distorted.

    "Would like to try to get DVD drive to read to see if can play movies, or do I need to look for a used G5 and with what min. specs"
    Is the optical drive connected to the onboard bus and not to the Acard controller card? That card may not support removable media devices. A 400 MHz G3 can handle DVD movie playback, provided that you use a supported program for doing so. If you've replaced the Apple/OEM drive and Apple's DVD Player and iMovie don't recognize the new one, you should try a different player program (try "VLC"). I've watched movies on older beige G3s with 266 MHz processors and Radeon (32 MB or 64 MB) graphics cards, using a patched version of (pre-OS X) Apple DVD Player 2.7. You need an OS X player program that recognizes your Matshita drive and you should probably upgrade the PCI graphics card to something newer than the Apple/ATI Rage 128 card with 16 MBs of SGRAM. Newer cards have faster GPUs and DDR memory, which will make a noticeable difference in overall performance.
    As far as streaming web video, your G3's hardware is limited, even with a high-speed internet connection. Uninterrupted, unpixelated playback may not always be possible, because there are other variables that you can't control.

  • How to find links for the KM resource

    Hi,
    I would like to know the details about the links, which are created for the KM resource.
    I want to search how many links and where these links are created for some perticular resource in KM.
    Please let me know how to achieve this.
    Thanks

    Hello -
    For archive pls refer below
    THere is no standard archive functionality in KM. but you can use time based publishing where you can give validity of the documents. Once the time is expired then automatically it will not display to the end users who have read permissions.
    kept in your directory but it will not visible to enduser (those are having a read access) section.
    So Go to folder (Life time enable on folder level) ---> Details ---> Click on Lifetime --> Enable it
    Afterthat you can select the appropriate file and assign the life time .Here is the process....
    A(file name)-> Details-> Properties ---> lifetime.
    /thread/103302 [original link is broken]
    http://help.sap.com/saphelp_nw70/helpdata/en/8d/2813418366f023e10000000a155106/content.htm
    Regards
    satya

  • Im looking how to find driver for Printer HP 2300 driver window 8 (64BIT) PLEASE help !!! stuck

    Hi ,
    I need help how to find driver for my old printer HP 2300d I use USB Cable for my Laptop window 8 (64 bit)
    help I am stuck can't print anything.
    Kim

    Hi, Welcome to hp forums and enjoy your stay, feel yourself like home here!
    I am very sorry to hear this, I will try my best to help you, I am always glad to help!
    Please follow the steps i provided below:
    1. http://windows.microsoft.com/en-ca/windows7/automatically-get-recommended-drivers-and-updates-for-yo...
    Now refer to the below link and right click your printer device
    2. http://pcsupport.about.com/od/windows-8/a/update-drivers-windows-8.htm
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • How to find Transaction for a Known Table maintenance View

    Hello Friends,
    May I know how to find transaction for a known table maintenance View.
    Thanks,
    Best Regards,
    Sudhanshu Garg

    Goto SE16 Transaction and enter TSTCP Table
    Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
    enter table name in bold.
    Thanks
    Seshu

  • Need documents for how to use OAM for APPS DBAs

    Hi All,
    Need documents/pdfs, how to use OAM for APPS DBAs.
    Thanks a lot in advance

    Hi,
    For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
    For 11i version pls chk :
    Oracle Applications System Administrator's Guide - Configuration (zipped)      B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
    --Rk                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How can find the location of my iPad when location services is off?

    How can find the location of my iPad when location services is off?

    If you're wanting to know if you can locate your iPad though iCloud, without Find my device enabled and without power, you won't be able to locate it.

  • I need to install the find my iPhone app on my ipad, it's won't install. Any reasons. Do I need to change something in my settings? I am up to date with my ios7. Please help!

    I need to install the find my iPhone app on my ipad, it will not install. Any reasons. Do I need to change something in my settings? I am up to date with my ios7. Please help!

    Try closing the App Store app via the iPad's taskbar and then do a soft-reset and see if you can install it after the iPad has restarted. To close the App Store : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How will Find my iPhone app help me track my iphone if someone has disabled the location services which doesnt require an unlock code?

    How will Find my iPhone app help me track my iphone if someone has disabled the location services which doesnt require an unlock code?

    You can't, and the same if the thief turms off the phone.
    What to do if your iOS device is lost or stolen
    Reporting a lost or stolen Apple product

  • Do I need to download the Find my Iphone app if it is already enabled on my iphone's settings?

    Do I need to download the Find my Iphone app if it is already enabled on my iphone's settings?

    Good question.  No, you do not.
    The only reason you would need the "Find My iPhone" app on your iPhone would be to find a different iPhone (or iPad) on this particular iPhone.
    Right now, with no additional app on your iPhone, if lost, you could find it from a computer or other device by simply logging into iCloud using your Apple ID and password.

  • Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro?  All my apps I was used in my iPad, thanks guys!!!!

    Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro?  All my apps I was used in my iPad, thanks guys!!!!

    The Mac OS X and iOS versions are separate products

  • How to find TCodes for Config Transactions

    Hi All,
    How do I find the TCode for a Config Activitity node?
    For example.
    OX09 is for "Maintain Storage Location"
    OB52 is for FI Period closing/opening
    I know these from google search, but how do find tcodes for other IMG activity nodes?
    Thanks in advance!

    Go to SPRO and in Menu Additional Information Click Display key and IMG activity then Sytem will show the SPRO Transaction along with path
    Else Go to Particular Node say Create Purchasing Group and Right Click on Node and Select Display Technical Info and in ID tab the Last four Charecters wud be the Trxn code.
    In SPRO-IMG screen Only Few Nodes will Show  / have the Transaction codes.

  • How 2 find program for smartform

    how 2 find program for smartform

    Hi,
    go to TNAPR table and find the driver program for the layout.
    give the layout name, if you know the output type also give it.
    OR
    go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
    that way you can find..
    Or else...
    Go to the Tcode -> NACE
    OR
    Go to the T-code 'SMARTFORMs'
    Give your form name
    go to the general attributes.
    Check the Package name.
    then go to T-Code-> SE80
    there check the program name for a package wise
    Regards,
    KK
    Message was edited by:
            Kishore Kumar Karnati

  • How to find out cellular number on ipad

    I have forgotten my cell number that m using for 3G on my ipad 2. Please let me know how to find out cell number on ipad 2

    Make sure that your Cellular Data button is turned on:
    CELLULAR DATA>CELLULAR DATA = ON
    Then the number should show up where Diavonex indicated above

  • I developed app in mac 10.6.8 with xcode 3.2.6.how can i run this app in ipad device

    i developed app in mac 10.6.8 with xcode 3.2.6.how can i run this app in ipad device

    actually i planned to get  provisioning profiles from apple by paying 99$ in following website
    https://developer.apple.com/programs/start/ios/ and followed by
    https://developer.apple.com/programs/start/standard/.
    but in last link,following thing were mentioned at bottom -
    Technical Requirements
    You must have an Intel-based Mac running OS X 10.8 Mountain Lion or later to develop and distribute iOS apps and Mac apps.
    but i\m using mac running OS X 10.6.8 snow leopard.
    Doubt:can't i run my app in ipad device?\
    Thank's in advance..

Maybe you are looking for

  • My software update app crashes. I can't update Lion, or get iTunes 10.5

    Hi, I'm running 10.7.1 on my intel iMac. I was excited to get the new update, as I'd like to update my iPhone to IOS5 via the new iTunes Update. But my Software Update facility keeps crashing. I continually submit the report to Apple. I've tried rebo

  • Calling a method from another file

    This is pretty basic stuff but i can't seem to get it right. I am calling a method from another file. The other file IS located in the same folder BUT when i compile i get errors "cannot find symbol" <===referring to limit and sieve i believe. The me

  • Apps not showing in purchases.

    So about 3 or so weeks ago I redeemed a $10 iTunes gift card. I obtained the code from FreeMyApps. I was in the Australian store so I switched my store to the U.S store. I then redeemed the gift card code and $10 credit was added to my account. Then

  • Problem with date format conversion

    Hi All, I was trying to load from a flat-file to an ods through psa. the file has a date format which is mm/dd/yyyy. i want to convert that to yyyymmdd. i created a custom object ZDAT for this field of type char with length 10. i wrote a code in tran

  • Can anybody tell me why images in my photo libraries have been replaced by the photoshop symbol? Thanks.

    Can anybody tell me why images in my photo libraries have been replaced by the photoshop symbol? Thanks.