BeginTimer and EndTimer Not Working In Data-Driven Unit Test Using DataSource Attribute
Using VS2012 Ultimate I have a unit test with the <DataSource> attribute which passes in values from a CSV file. I'm wrapping the unit test in a load test. I expect a Transaction to appear in the load test results for each row in my DataSource
due to the BeginTimer and EndTimer methods in the unit test. However, I only get 1 transaction, with response time roughly equal to the overall test time. For example, if each row in the DataSource takes 1 second to process, then my test time and
transaction time would be about 10 seconds with 10 rows in the CSV file.
I've created a load test with Constant Load Pattern, 1 user, and 1 test iteration. Seeing the behavior described above.
I have tried with and without and the check for $LoadTestUserContext. I'm only using that because I get a NotSupportedException when running the unit test on its own. I can't believe this bug still
exists, but that is another topic.
Note also that I cannot see the Debug output in the Output window in VS2012.
Any tips? Thank you.
<TestMethod()>
<DataSource("Microsoft.VisualStudio.TestTools.DataSource.CSV", "|DataDirectory|\TestData\MyValues.csv", "MyValues#csv", DataAccessMethod.Sequential)>
Public Sub WebServiceTest()
Dim service As MySvc = New MySvcClient()
Dim input As MyInput = New MySvcInput()
input.A = testContextInstance.DataRow("A")
input.B = testContextInstance.DataRow("B")
Dim g As Guid = Guid.NewGuid()
If TestContext.Properties.Contains("$LoadTestUserContext") Then 'running as load test
TestContext.BeginTimer("MySvcTrans")
Debug.WriteLine("Begin Transaction MySvcTrans: {0}", g)
End If
Dim output As MySvcOutput = service.Method(input)
If TestContext.Properties.Contains("$LoadTestUserContext") Then 'running as load test
Debug.WriteLine("End Transaction MySvcTrans: {0}", g)
TestContext.EndTimer("MySvcTrans")
End If
Assert.AreEqual(0, output.ReturnCode)
End Sub
Hi John,
>> I expect a Transaction to appear in the load test results for each row in my DataSource due to the BeginTimer and EndTimer methods in the unit test. However, I only get 1 transaction, with response time roughly equal to the overall test
time.
Could you share me a screen shot about the reslut in load test?
Could you share us the load test result in "Transaction"Tables?
About how to use the
Transaction for unit tests, maybe you could get useful informaiton here:
http://blogs.msdn.com/b/slumley/archive/2006/04/14/load-testing-web-services-with-unit-tests.aspx
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Intelligent barcode font not working in Data Merge?
Intelligent barcode font not working in Data Merge?
When using Data Merge I only get a pink box where the code is supposed to go. If I cut and paste the same info into the spot the bar works fine. Anybody ever have this problem?It looks like you're working with InDesign, correct? I would try posting your question over in the general InDesign forum: http://forums.adobe.com/community/indesign The folks over there will be able to provide you with more specialized expert help
-
HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect) at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush() at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End() at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error: Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adilchinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying! -
FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?
Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.
-
App Store is not working in Data plan in iPhone 4s
In my New iPhone 4s App Store is not working in Data plan.Even though i have restarted still the same problem persisits.
And also If I turn off some apps(Settings-->Use Cellulalar data for ) by using Cellular data for those are not working
Could someone help me.I didn't have any problems with the Malaysia App Store.
Try this... install the Mac OS X 10.6.8 Update Combo
Then restart your Mac.
Launch the App Store.
Check the round flag icon bottom left corner of the iTunes window to make sure the correct country is selected. If not, click the flag then select Malaysia.
It's ok to install the combo even though you are already running v10.6.8. -
I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
Hi, I just realized one of the USB ports of the laptop (powerbook G4) is not working for data transmition, it only works for power, like a cooler.
Does anybody has any idea?USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Cheers, Tom -
Drag and Drop not working since last software update
Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving an icon on the doc and the same thing occured. YOu can drag but the items will not drop.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
IPS event monitor and reports not working
Dear after upgrading my IPS from E3 to E4 the event monitor and reports not working, can you please advice my to solve this issues
Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4 Feb 14 2014 15:33:22 39715 514 IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
hostId: SSM02
appName: sensorApp
appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature: description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
subsigId: 0
sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
attacker:
addr: 172.x.x.x locality=OUT
port: 39715
target:
addr: x.x.x.x locality=OUT
port: 514
os: idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz -
S10-3t bluetooth and wireless not working with windows 8
S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....
Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian -
I tried importing email addresses from gmail and now my address book is locked up and will not work. Do I need to delete my address book software and reinstall? If so, what is the proper way to do this? New to Macbook software. I have tried several things and nothing has helped. I have backed up photos, movies, etc. My addresses are on my iphone so I can sync them later right if I loose my data?
Thanks for your time and expertise,
T.You can probably resolve this by removing some Address Book preference files rather than deleting your Address Book application.
First turn off Synchronize in Address Book Preferences if you can.
Next restart Address Book and try to export everything to your Desktop.
I have had a play and found my Address Book preference files. In the following ~/Library is the Library within your Home folder. Any numerals may differ on your Mac. Quit Address Book before doing anything with these.
1 - Display details and things set in Address Book Preferences
~/Library/Preferences/com.apple.AddressBook.plist
2 - Has no data - not sure what this does
~/Library/Preferences/com.apple.AddressBook.abd.plist
3 - Has last sync date - may have more if I used sync
~/Library/Preferences/ByHost/com.apple.AddressBook.sync.000393735c06.plist
4 - My contact details
/Library/Preferences/AddressBookMe.plist
5 - Individual addresses and groups stored as separate files within:
~/Library/Application Support/AddressBook/Metadata
6 - All of these addresses are are also in this single database:
~/Library/Application Support/AddressBook/AddressBook-v22.abcddb
If you wish to remove all addresses drag both 5 & 6 to your Desktop.
If you wish to reset preferences drag 1 your Desktop.
Removing 3 may resolve sync issues but I am unable to test this.
If you wish to reset everything drag all except 4 to your desktop.
Apple has an interesting page at: http://support.apple.com/kb/TS2481
I hope this helps. -
Timemachine and link not work property...
At home I have 10.4.2 and no digidesign hardware.
Timemachine and link not work property...
I send them: when I use ol algorythm- they caclulating 1 mono file (3 min lengh) about 15 min at dual G5. It is normal? And when I use new algorytm- nothign happen whith file. No result. (1 week it work fine).
Link in matrix not work
And what system I shood to use at studio whith PT?CRash when change lengh of region whith new algoruthm
Date/Time: 2005-08-24 12:11:29.752 +0400
OS Version: 10.4.2 (Build 8C46)
Report Version: 3
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [91]
Version: 7.1.0 (7.1.0(877))
Build Version: 1A73
Project Name: LogicPro710_ApplicationData
Source Version: 900001
PID: 288
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000007e
Thread 0 Crashed:
0 com.apple.logic.pro 0x0059a8c8 0x1000 + 5871816
1 com.apple.logic.pro 0x0037183c 0x1000 + 3606588
2 com.apple.logic.pro 0x00370000 0x1000 + 3600384
3 com.apple.logic.pro 0x002983b4 0x1000 + 2716596
4 com.apple.logic.pro 0x00298a84 0x1000 + 2718340
5 com.apple.logic.pro 0x00298c28 0x1000 + 2718760
6 com.apple.logic.pro 0x0005e264 0x1000 + 381540
7 com.apple.logic.pro 0x0005c6e0 0x1000 + 374496
8 com.apple.logic.pro 0x002aa538 0x1000 + 2790712
9 com.apple.logic.pro 0x00571e10 0x1000 + 5705232
10 com.apple.logic.pro 0x0016c090 0x1000 + 1486992
11 com.apple.logic.pro 0x0017864c 0x1000 + 1537612
12 com.apple.logic.pro 0x00178ad8 0x1000 + 1538776
13 com.apple.logic.pro 0x0016c150 0x1000 + 1487184
14 com.apple.logic.pro 0x0018e388 0x1000 + 1627016
15 com.apple.logic.pro 0x0018e588 0x1000 + 1627528
16 com.apple.logic.pro 0x0017d0cc 0x1000 + 1556684
17 com.apple.logic.pro 0x00124170 0x1000 + 1192304
18 com.apple.logic.pro 0x002fed40 0x1000 + 3136832
19 com.apple.logic.pro 0x003026a8 0x1000 + 3151528
20 com.apple.logic.pro 0x00300a94 0x1000 + 3144340
21 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
22 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
23 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
24 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
25 com.apple.HIToolbox 0x93205998 HandleClickInContent + 368
26 com.apple.HIToolbox 0x93155d6c HandleWindowEvent + 1584
27 com.apple.HIToolbox 0x931655c8 StandardWindowEventHandler + 160
28 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
29 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
30 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
31 com.apple.HIToolbox 0x93229ffc SendEventFromMouseDown + 156
32 com.apple.HIToolbox 0x931b6b08 HandleWindowClick + 572
33 com.apple.HIToolbox 0x931b6560 HandleMouseEvent + 456
34 com.apple.HIToolbox 0x931655bc StandardWindowEventHandler + 148
35 com.apple.HIToolbox 0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
36 com.apple.HIToolbox 0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
37 com.apple.HIToolbox 0x93128ed0 SendEventToEventTarget + 40
38 com.apple.HIToolbox 0x931b5530 HandleMouseEventForWindow(OpaqueWindowPtr*, OpaqueEventRef*, unsigned short) + 236
39 com.apple.HIToolbox 0x931b4aa8 HandleMouseEvent(OpaqueEventRef*) + 368
40 com.apple.HIToolbox 0x9312923c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 496
41 com.apple.HIToolbox 0x93122c44 DispatchEventToHandlers(EventTargetR -
My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?
This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
CRM 5.0 Webclient - Characteristic Change Pointers
Hi Gurus On ERP we have site values which have characteristic data attached. On a daily basis from ERP we run transaction BD21 with Message Type "CLFMAS" which picks up changed characteristic data and creates Idocs which are then sent to CRM and proc
-
I turn on my iPad one day and found that the screen color runs and it sort of sparkled with green pixels. Everything else worked fine. I tried resetting and it didn't solve the problem. After a while (half hour later) the screen went back to norma
-
Ease your worries about potential headphone jack problems for $6.50
Just get one of these: http://www.radioshack.com/product.as...2559&hp=search It's a right-angle, -foot headphone cable extension with strain relief and a volume control. Actually, the reason I got one was because I use a pair of Grado SR-60's with my
-
Importing/capturing compactflash disk files from Canon xf 100
files show up as .cif, .xml, .mxf, and .sif. All of them are grayed out when I try and open/import? It's a brand new Canon XF100, recording in MPEG-2 Long codec. How do I get them into FCP?
-
Work flow book Information please
Please tell me the good book to learn SAP work flow basics thank u in advance