Best approach to synchronize data from custom application database to EBS

Hi All,
We have requirement to synchronize data between custom application database and EBS database. Thw two database is on different location connected by 128 kbps connection.
The synchronization will do the following task :
- Download customer table from EBS (I have checked there are only 2000 rows of it)
- Up load billing data to EBS auto invoice interface table
The question is :
What approach is the best way to do this synchronization task ? some that come into my mind :
- create database link and run stored procedure to do the batch update ?
- for Customer synchronization, is it a good idea to create Materialized view so that any update to EBS customer data will be updated, refreshed nightly
- or is ther any better approach ?
Thank you very much,
xtanto

Hi,
There are two direction of synchroonization that should be done :
- RECEIVE Customers data from EBS into Custom Billing Database -> Yes, this can be done via materialized view
- SEND Billing data from Custom Billing Database into EBS database (Interface table)-> this cannot be done with materialized view
--> so how is the best way to do this under limited bandwidth (128 kbps) ?
Thank you very much,
xtanto
Edited by: xtanto on Oct 19, 2008 1:52 PM

Similar Messages

Best approach to synchronize data between two oracle database remotely

Hi All,
We have requirement to synchronize data between custom application database and EBS database. Thw two database is on different location connected by 128 kbps connection.
The synchronization will do the following task :
- Download customer table from EBS (I have checked there are only 2000 rows of it)
- Up load billing data to EBS auto invoice interface table
The question is :
What approach is the best way to do this synchronization task ? some that come into my mind :
- create database link and run stored procedure to do the batch update ?
- for Customer synchronization, is it a good idea to create Materialized view so that any update to EBS customer data will be updated, refreshed nightly
- or is ther any better approach ?
Thank you very much,
xtanto
Edited by: xtanto on Oct 18, 2008 3:30 PM

Maybe try Streams?

Best way To get data from another application using NDDE lbrary

My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
This is my code:
l : is the list of stocks.
This Sub connects to server and requests the data :
Public Shared Sub GetQuotes()
Try
client1 = New DdeClient(server, topic)
client1.Connect()
For i As Integer = 0 To l.Count - 1
client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
This the client_Advise Sub:
Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
For q As Integer = 0 To l.Count - 1
If l(q).t = w(1) Then
Dim item() As String = e.Item.Split("$")
If l(q).Open = "#" Then
l(q).Open = "0"
End If
If l(q).hi = "#" Then
l(q).hi = "0"
End If
If l(q).lo = "#" Then
l(q).lo = "0"
End If
If l(q).Close = "" Or l(q).Close = "#" Then
l(q).Close = "0"
End If
If l(q).pclose = "#" Then
l(q).pclose = "0"
End If
If item(1) = "open" Then
l(q).Open = Format(Val(e.Text), "0.00")
ElseIf item(1) = "last" Then
l(q).Close = Format(Val(e.Text), "0.00")
ElseIf item(1) = "high" Then
l(q).hi = Format(Val(e.Text), "0.00")
ElseIf item(1) = "volume" Then
l(q).Volume = Val(e.Text)
ElseIf item(1) = "low" Then
l(q).lo = Format(Val(e.Text), "0.00")
ElseIf item(1) = "pclose" Then
l(q).pclose = Format(Val(e.Text), "0.00")
If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
End If
l(q).flag1 = 2
ElseIf item(1) = "date" Then
l(q).Date1 = e.Text
ElseIf item(1) = "time" Then
l(q).Time = e.Text
End If
Exit For
End If
Next
End Sub
Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
Thanks in advance.

Hi MikeHammadi,
According to your description, you'd like to get data from another app using NDDE library.
When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best approach to pull data from email

I am a teacher at a high school that uses an online program to do some homework and quizzes. At present, I get the emails and manually read them and enter the scores by hand into a spreadsheet. I have been doing some searching around for scripts that can automate this for me, but first I think I need advice on the process itself. Here is a sample email to show you what the data looks like:
I am currently using Automator to try to design a workflow whereby I get the selected messages, run an AppleScript that pulls the data out, copy this to clipboard, then paste the clipboard either into a text file or spreadsheet. I found a few scripts out there (like this one) that seem to have some of the pieces I need, but I can't get the scripts to work when I customize them to my purpose. Where I seem to really be getting stuck is the design of the script:
--all I need is the name and the percentage score, or the "you answered x correctly" part
--should I try to set the script to key in on the percent sign itself, since that's a unique character? or is there a better way to aim?
Here's a sample script I'm trying:
on run {input, parameters}
    tell application "Mail"
        set theSelectedMessage to selection
        if (count of theSelectedMessage) is equal to 0 then
            display dialog "Please select a message in Mail first, then run this script again."
        else if (count of theSelectedMessage) is equal to 1 then
            set thisMessage to item 1 of theSelectedMessage
            set theBody to content of thisMessage
            set theTargetText to paragraph 3 of theBody
        else
            display dialog "Please select only one message in Mail first, then run this script again."
            extract name from thisMessage
        end if
    end tell
    return input
end run
Any and all help is greatly appreciated!

Thanks to Hiroto!
pull content from mail message & export to excel

Best Practice on querying Data from Database

Hello and I was wondering what is the preferred and best practice for querying data from an SQL database inside a JSP page. Is it using the JSTL library or another method? Thanks

It depends on the size of the application really.
The "correct and preferred" approach in a large MVC app would be to have a seperate class that does all the database access, retrieving the data into java objects.
Check out [url http://java.sun.com/blueprints/corej2eepatterns/Patterns/DataAccessObject.html] DAO pattern
You then "save" the data into request/session attributes, and forward to a jsp page to render the result.
Most approaches recommend a separation between JSP (the view) and SQL code.
The JSTL sql tags are provided more for "quick and dirty" code applicable in small applications, or for fast prototyping. That approach is not really robust for large scale applications.
Cheers,
evnafets

How to migrate data from oracle 9i database to new machine 11gr2 RAC ASM

Hi Expert
I need your expertise to advise me what is the best method to move data from oracle 9i database to new machine running oracle 11r2 RAC database with ASM.
Currently my production server running on HPUX ORACLE 9I database with normal file system. My new server is running SUN SOLARIS SPACR 64 bit ORACLE 11gr2 RAC with ASM. What is best method to move data over so it will be consistent. Any guide can refer.
Regard
William

Hi William,
See the note in metalink Migration of Oracle Database Instances Across OS Platforms [ID 733205.1] to saw the Endian Format of your OS. If is the same you can use the RMAN to convert the database to another OS, if not the only option is using export/import (Transportable Tablespaces).
To upgrade from 9i to 11g, see the note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2.
To migrate your FS to ASM the only way is using RMAN, so see the note - How to move a datafile from a file system to ASM [ID 390274.1].
Hope this help you.
Best Regards,
Ruben Morais

Best practice - Pass data from Custom Comp to Another Custom Comp

Hi, id like to know what would be the best practice to pass data from a custom component to another custom component. Right now I got these options:
1st Component Custom Event - Main App - Public Properties 2nd Component
1st Component Custom Event - Main App - Public Setter 2nd Component
Is there another more directly way of doing it? or a better way?
Thanks

Hi, id like to know what would be the best practice to pass data from a custom component to another custom component. Right now I got these options:
1st Component Custom Event - Main App - Public Properties 2nd Component
1st Component Custom Event - Main App - Public Setter 2nd Component
Is there another more directly way of doing it? or a better way?
Thanks

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

What could be the best way to Export data from 11.5.8 instance to 12.1.2?

Hi All
What could be the best way to Export data from 11.5.8 instance to 12.1.2?
Release: 11.5.8
OS: Oracle Solaris on SPARC (32-bit) verison 9
DB: 9.2.0.1
Thanks in advance

What kind of data you are looking to move?
Database export/import is only supported for full database export/import and the application release should be the same on the source/target nodes.
You can move the setup using iSetup or FNDLOAD.
Thanks,
Hussein

Move data from one Application to another Application.

Hi All,
I have a requirement to move data from one Application to another Application(we are working on SAP BPC 5.1/7.1 MS version).
Can anybody please mention all the possible ways to achieve it.
Thanks in advance.
Regards
Vani

Hi,
The best way to do this would be to use destination_app statement. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/79/b299446e02478fa5eca684d1297ef3/content.htm
Alternatively, you can definitely export the data from one application and import it to the second.
Hope this helps.

What is the best approach to process data on row by row basis ?

Hi Gurus,
I need to code stored proc to process sales_orders into Invoices. I
think that I must do row by row operation, but if possible I don't want
to use cursor. The algorithm is below :
for all sales_orders with status = "open"
check for credit limit
if over credit limit -> insert row log_table; process next order
check for overdue
if there is overdue invoice -> insert row to log_table; process
next order
check all order_items for stock availability
if there is item that has not enough stock -> insert row to
log_table; process next order
if all check above are passed:
create Invoice (header + details)
end_for
What is the best approach to process data on row by row basis like
above ?
Thank you for your help,
xtanto

Processing data row by row is not the fastest method out there. You'll be sending much more SQL statements towards the database than needed. The advice is to use SQL, and if not possible or too complex, use PL/SQL with bulk processing.
In this case a SQL only solution is possible.
The example below is oversimplified, but it shows the idea:
SQL> create table sales_orders
2 as
3 select 1 no, 'O' status, 'Y' ind_over_credit_limit, 'N' ind_overdue, 'N' ind_stock_not_available from dual union all
4 select 2, 'O', 'N', 'N', 'N' from dual union all
5 select 3, 'O', 'N', 'Y', 'Y' from dual union all
6 select 4, 'O', 'N', 'Y', 'N' from dual union all
7 select 5, 'O', 'N', 'N', 'Y' from dual
8 /
Tabel is aangemaakt.
SQL> create table log_table
2 ( sales_order_no number
3 , message        varchar2(100)
4 )
5 /
Tabel is aangemaakt.
SQL> create table invoices
2 ( sales_order_no number
3 )
4 /
Tabel is aangemaakt.
SQL> select * from sales_orders
2 /
        NO STATUS IND_OVER_CREDIT_LIMIT IND_OVERDUE IND_STOCK_NOT_AVAILABLE
         1 O      Y                     N           N
         2 O      N                     N           N
         3 O      N                     Y           Y
         4 O      N                     Y           N
         5 O      N                     N           Y
5 rijen zijn geselecteerd.
SQL> insert
2    when ind_over_credit_limit = 'Y' then
3         into log_table (sales_order_no,message) values (no,'Over credit limit')
4    when ind_overdue = 'Y' and ind_over_credit_limit = 'N' then
5         into log_table (sales_order_no,message) values (no,'Overdue')
6    when ind_stock_not_available = 'Y' and ind_overdue = 'N' and ind_over_credit_limit = 'N' then
7         into log_table (sales_order_no,message) values (no,'Stock not available')
8    else
9         into invoices (sales_order_no) values (no)
10 select * from sales_orders where status = 'O'
11 /
5 rijen zijn aangemaakt.
SQL> select * from invoices
2 /
SALES_ORDER_NO
             2
1 rij is geselecteerd.
SQL> select * from log_table
2 /
SALES_ORDER_NO MESSAGE
             1 Over credit limit
             3 Overdue
             4 Overdue
             5 Stock not available
4 rijen zijn geselecteerd.Hope this helps.
Regards,
Rob.

How to use macro to pull data from custom infotype?

Hi all,
Is rp_provide_from_last p9004 space pn-begda pn-endda. works?
i am getting all zeros .
is using macros possible pull data from custom infotype? or only select?
Regards
sas
For LDB PNPCE
get peras:

Hi,
Try the following Macro it will solve out your problem,
DEFINE rp_provide_from_last.
rp_found = '0'.
clear: rp_tabix.
loop at &1.
    if &2 ne space.
      check &1-subty eq &2.
    endif.
    if &1-begda le &4 and &1-endda ge &4.
      rp_found = '1'.
      exit.
    endif.
    if &1-begda le &4 and &1-endda ge &3.
      rp_tabix = sy-tabix.
    endif.
endloop.
if rp_found eq '0'.
    if rp_tabix ne 0 .
      rp_found = '1'.
      read table &1 index rp_tabix.
    else.
      clear: &1.
    endif.
endif.
END-OF-DEFINITION.
rp_provide_from_last <p????> space <begda> <endda>.
Best Regards,
Faisal

What is best method to retrieve data from two databases

I'm writing a report that needs data from two sql databases. Not the same brand. Grouping and sorting fields come from both databases, so I can't just read one and retrieve data from the other. It seems to me I have to extract data from each data base using crystal reports, merge the two files using crystal reports and feed the merged file into crystal reports. I've not found a simpler or better method in the Crystal Reports documentation. Is there documentation about doing this process on the web site or with crystal reports documentation? My method seems cumbersome so I'm wondering if there is a better method.

Jeffrey,
A cheap and effective solution, for a periodic transfer would be using XML.
If you have the DDL for all of the objects in the database, you can just duplicate it on whatever RDBMS engine you want, and then, extract the data, table per table into XML files from the target server, and then load the files into the target server.
Otherwise, if you are going to do this in an ongoing basis, then, use SAP Replication Server. The best asynchronous, real time, heterogeous replication solution in the industry, exploited with a great deal of success by many critical mission financial applications with global topologies and sub second latency.
My two cents.
I hope they help.
Regards,
Jean-Pierre

SQL Select Performance - Approached to fetch data from big table

Hi
I just wanted to know view on different approached to fetch data from a table which has 40 billion records and which joined to another table which has 1 million record.
e.g.
I have two tables TableA and TableB
TableA has 40 Billion records has 6 columns
     TableA has partitions on Date
     TableA has required indexes
TableB has 1 Milluion record and has 10 columns
     Table A has indexes
Now I have written query like
select distinct TableA.column1,TableA.column2,TableB.columnA
FROM TableA join TableB
ON TableA.Column1=TableB.Column2
WHERE TableA.DateColumn between StartDate and EndDate
for a given date range it will fetch 5 billion of records which takes around 40 minutes.
I just wanted to know what all tuning approaches I can follow. What would be the best approach to make record retrieval faster in such a scenario.
Just wanted to know your vies/experience in such a scenario

Sufficiently large array fetchsize
and,
possibly using parallel query,
pop into my mind.
I would be interested though in the business requirement that asks for you to write a program that gets 5 billion (!) rows out of the database...

What are the diffrent ways to copy data from one application to another?

Hi,
Can you guys tell me what are the different ways to copy data from one application to another application??
I know we can do it through script logic using DESTINATION_APP.
Is there any other way to copy data from one application to another application?
Please help me
Thanks,
Charly

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

Best approach to synchronize data from custom application database to EBS

Similar Messages

Maybe you are looking for