Best compressor settings for DVCPRO50 footage for DVD

Hello,
I recently purchased a Firestore fs-100 and shot a football game in DVCPRO50. When I made a DVD after compressing it, using compressor, I didnt seem as clear and crisp as I thought it would be. When I import it into Compressor, what settings should I pick ect, in order to get the best quality DVD I can produce. Should I open up inspector and make alot of setting adjustments? If yes which ones? Any advice would be greatly appreciated......Thank you in advance for your assistance!!!! Also, I purchased Final Cut Studio in 2005 and my version of Compressor(version 2.0.1) isn't as updated as the current versions out there. Thanks!
NJShooter

Just to let you know, I shot the footage in the football footage in the sun. I took your advice and used mpeg 2 and used one pass best option. I also used better deinterlace in frame control, and used 16:9 which it was shot in and my panasonic HVX200 video camera has 16:9 ccd's in it. Around the helmet and and some other body part during movement have what looks like heat on a side walk during a hot day. waves that are around even the unmpires arms and head as well. I shot the footage on a firestore fs-100 and had my camera and the tapeless capture device ( the firestore ) set on DVCPRO50 SD format 480X720 which is regular format not HD. It should look great compared to DV which I get shooting on tape. I have been reading all about compressor and perhaps its not compressor? I am using the quicktime setting in the firestore, which makes it easy to import into Final Cut Pro and am only putting a title in the timeline and then exporting to compressor. I pick the MPEG2 option in compresor for a DVD and am bummed at the end when I play the DVD on my 720 16:9 set. Any more advice would be greatly appreciated. Can you explain the ramping thing to me? Really appreciate your help by the way!!!!
HJShooter

Similar Messages

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

Best export settings for dvd

Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

>require this much memory
Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Best Compressor settings for HD720 16:9 to cell phone OTHER than iPhone?

Hey there,
Does anyone know a good set of compressor settings for exporting HD720 16:9 29.97fps to a cell phone compatible format other than iPhone? Do most cell phones use an MPEG format? I guess I should start there. New to this one.
Thank you,
ed

There are different MPEG flavours and compression for DVD, mobiles or web often means creating some flavour of MPEG file. Even H.264 is an MPEG file. One of the most advanced.
Go to Compressor settings and look for a folder named Mobile devices then do a bit of your DIY (test, test, test).
G.

Best Compressor Settings for Backup

Hello all,
At my place of business we capture live footage in DVCPRO HD format using Final Cut Pro. From that I edit the footage and compress it using Compressor. My question is concerning the unused footage that we capture. I'm trying to learn the best compressor settings that will offer the best balance of reduced file size with good quality.
Thanks!

The best is not to compress it at all. You don't know what the popular format will be in a couple years.
Raw drives are cheap. I have a drive dock on each of my machines plugged into the internal sata port of the Mac Pros. I backup all the footage to raw drives and then put them on the shelf. And yes, there are clones of those drives. And I've learned to do it as I go along rather than all at once. I use ChronoSync to keep the raw drive matched to the working raid in my machine. Takes a lot less time that way.

Best compressor settings for HDV downconvert -- attention hanumang

Reposting this bit because it differs significantly from topic of thread where it appeared.
goal: the best possible HDV-DV downconvert using final cut studio (hitch: I have added problem of converting resulting film from PAL to NTSC)
previous method: the best luck I've had is Quicktime converting from HDV to 10-bit PAL SD and compressor converting that to NTSC DVDPRO50
Hanumang recommended using compressor for first conversion. My response:
What settings?
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't seem any better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
I would be most grateful for help in this matter. I've spent a few weeks on this. I just plod along, zombie-like, trying a few different things every day, hoping to hit the jackpot eventually. I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget, but eventually, once the film is finished and (hopefully) I have more money, I''d happily pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.
What compressor settings do you recommend?
The best workflow I've come up with is qucktime conversion from HDV PAL to SD 10-bit PAL, then compressor conversion from 10-bit Pal to DVDPR0 50 NTSC.
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only been change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't look better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
Anyway, I would be most grateful for answers to these questions. I've spent a few weeks on this and am past the point of frustration. I just plod along, zombie-like, trying a few different things every day, dimly hoping to hit the jackpot eventually. Actually, I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget for the time being, but eventually, once the film is over and (hopefully) I have more money, I'll be willing to pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.

My bad, I was out in the afternoon and didn't get a chance to pick up on your reply to the last thread. Sorry to hear that your first attempt with Compressor was so disappointing.
Just so we're clear, you're using what exact versions of the software? FCP 5.1? Compressor 2? (For Compressor, in particular, 2.0 vs 2.1 vs 2.3 is important.) And, what are your sequence settings in FCP? Finally, we're to understand that you're actually working in PAL HDV? Or are you working in AIC?

Best Export Settings for DVD burning and Computer viewing

Hello,
I am trying to export a 1 hour video that I need to be compatible with standard DVD players as well as viewable on any computer.
Original footage was shot with a Canon 5d Mark ii in 24fps.
I have done all of my editing in Premiere Pro CS6. From there, I exported a high quality file to bring into Media Encoder (for trials of best output). My master file from Premiere was exported with the Preset MPEG2. The only thing I changed in the preset was VBR from 1 pass to 2 pass.. This gave me a 6.2 GB file.
I then brought that file into Media Encoder where I have tried the following presets:
MPEG2-DVD - Match Source Attributes
MPEG2-DVD - NTSC 23.976fps Widescreen High Quality
MPEG2 - HDTV 720p 23.976 High Quality
MPEG2 - NTSC DV High Quality
These settings have encountered various issues.. some have significant banding, but most importantly, none of them will play on my DVD player when I burn them to a disc.
The discs I am using are Sony DVD-RW with a 4.7GB capacity.
Where am I going wrong here? From what I've read, the format needs to be MPEG2 to be viewed on DVD... Sorry if I sound ignorant! This stuff is tricky..

First off, don't export your timeline and then take the result to AME to re-encode, this is compressing your video twice and degrading quality (not to mention takes extra time and hard drive space). Always export direct from Premiere to Media Encoder. If you must use an "intermediate" file as part of your workflow, perhaps to archive a completed video that might later be exported to other formats, then use a lossless codec such as UT or Lagarith (free downloads).
For DVDs, you MUST use "MPEG-2 DVD". Other forms of MPEG-2 are not appropriate, as the official DVD specification requires that the MPEG-2 file has certain attributes. Not recommended to use "Match Source" for ANY export, just choose an appropriate setting as needed.
This should be correct for your application - MPEG-2 DVD > NTSC 23.976fps Widescreen High Quality
If you want to encode a DVD file over 1 hour in length, then you will need to adjust the encoding bitrate so the resulting file will fit the disc. Rule of thumb is 560/minutes = bitrate, but you might round down the result a bit to allow for menu overhead and such, depending.
Once you export the "MPEG-2 DVD" file, you can NOT simply burn that file to DVD media. That is only creating a DATA disc and it will not be playable in a DVD player (though a computer or PS3/PS4 may work since they can play most media files). To make a DVD that works in all DVD players (and meets the spec), it MUST be "authored" in a program like Adobe Encore. This compiles your content and menus and all that and then writes the result to the disc in certain way so that DVD players can read the disc. If you open any DVD on your computer, you will see a folder called "VIDEO_TS" and inside that there are .vob files and others. That is a proper DVD. And once you have a proper DVD, you can't simply copy the VIDEO_TS to another disc (as DATA), you must tell the burning software to create as a "VIDEO DVD" and not DATA, or it again won't be readable in a DVD player. Very picky spec, sorry.
When using AME to export MPEG-2 DVD, it will create two files, audio and video (.m2v and .wav), you will then Import both of those into Encore together. Note that you CAN import other formats into Encore, such as .avi but Encore will then transcode that to the correct MPEG-2 format anyway, so best that you take charge and create the right media in the first place in AME before you get to Encore.
EDIT: In AME, any time that your source is higher resolution than the destination, such as HD to DVD, you can check the "Max Render Quality" button in AME to provide the best downscale quality.
EDIT 2: I see you're using DVD-RW media. That is fine for experimenting, but for delivery to clients always use good quality DVD-R or DVD+R media. DVD-RW may not have the best compatibility with players and costs more anyways. DVDs are so cheap now that I just proof to DVD-R and toss the bad ones, up to you.
Thanks
Jeff Pulera
Safe Harbor Computers

Best Compostion Settings for DVD output

I am working on a project that does involve some regular DV footage but the vast majority of the footage will be animation movs exported from After Effects. These movies are simply pans and zooms on still photos done in After Effects.
What I'm wondering is what sequence settings I should use.
The final output will be to DVD and it will be viewed mainly on TVs, not computers.
One thing I hate is when I do these still pics and on a TV they look jittery or shimmery or alias-y or whatever it's called.
Is there some way to avoid this?
Is it possible to do a movie in progressive scan even though some of the footage is DV?
How about when exporting from AE? Should I use the DV setting or the progressive setting?
Any thoughts will be very helpful.
Thanks,
S

David,
Your answer "Depends on what is causing the problem. Could be one of (or a combination of) many things; resolution too high, areas of fine detail in the image, poor scan, dimpled/textured photo paper, patterns within the image, areas of high contrast within the image, etc. Each of these problems needs to be addressed individually for each photo." intrigues me.
We are scanning the photos as high res (3000x2000 in some cases) TIF files to allow for panning and zooming. They are B+W and do often have high contrast. They also often have areas of fine detail. I don't think poor scanning or dimpled paper are issues.
Could you offer any ideas on how to fix these images for TV viewing? I will say that I have read other posts on here about using deinterlace, flicker filter, etc and I am never pleased with the way the image is degraded with these filters.
The best I have found is to use a slight blur. On this forum people often say less than .5 pixels but that is never enough to eliminate the flicker, shimmer, what-have-you. I am often forced to use a gaussian blur of 1 to 1.5 pixels.
What I don't like about this is how it then looks on a computer monitor (should people pop the DVD into watch on their home computer). On a TV the images generally look fine.
Any ideas?
Do you think just sticking with regular NTSC DV sequence settings is appropriate?
What about sequence settings for video processing? Would it help at all to use "high quality YUV" rather than "8 bit YUV" since these are animation movies of still pics?
Thanks for the help,
S

What is the best Compressor settings for burning a 2 hour DVD on single layer disc?

I have a 2 hour (120 minutes) project timeline which I want to encode in compressor to fit on a single layer DVD.
Do I need to change the Bit Rate to make it fit on a single layer?
Or can someone post the settings or link to where I can find the best settings?
Thanks in advance,
z

Select "Best 120 minutes" and you should be good to go.
x

The Best Compressor Settings for Rap Vocals

Does anybody know the best settings in compressor for rap vocals. I don't want it to sound over compressed but clean enough where the attack responds quickly. Thanks guys

I go for a ratio of about 8.0:1 on rapper vocals with an attack time of around 10 ms
Actually ( in Logic) if you click on an audio channel and go to settings at the top of the channel strip, in there under male vocals, there's a not bad rapper vocal setting which will get you started.

Best compressor settings for web videos shot on canon 7d?

Hello,
I've started shooting video on the Canon 7d. I usually compress my videos for youtube as MP4 at 300 Kbps. However my last video had a presenter with background music track added. When I did my first export to compressor without the music background all the audio of the presenter was perfect. When I added a soundtrack in the background the presenter's voice was distorted, sounding like a Dalek!
I got better results with less distortion when I re compressed the video as MP4 800 kbps. Can anyone please recommend better settings that would give much superior sound and picture with zero distortion?
Much appreciated.
thanks

Did you try using the YouTube preset?

Best compressor settings for online veiwing??

hello
I am tring to put a 1 minite clip online original size clip size is 1920x1080. On compressor i am seleting the quicktime download 800 kbs and lan settings and the picture comes out real blocky. What settings should i put it at to get good quality? thanks

ok I did that and the quality looks great, but I have one little problem. The video like skips at two points in the video, and the original doesn't have this problem. Theres a part where it like skips back a frame and continues...Thats the best way I can explain it. And when I compress using compressor I don't get this skip, but I get jaggy lines when I use compressor.. Any idea what can be causeing that skip in the video...? Could it be a setting or something? All I do is pick bandwith high and input the frame size you told me and thats all...
thanks

BEST COMPRESSOR SETTINGS FOR YOUTUBE VIDEO?!?!?

I have about a 3 min 30 sec video that I am trying to put up on youtube. I see on some youtube videos quality is still sometimes good, and on others its terrible. I am wondering what type of setup I can use in compressor to get the best quality out of my video after uploading to youtube!! Thank you

This article is awesome:
http://www.kenstone.net/fcphomepage/youtube_compressorgary.html
Hope that helps!
~Luke

Best export settings for HD video to DVD

hello, I now use premier pro cs5, from cs4 on my mac, love it, but I shoot with a cannon XL H1s HD video, my questiion is when viewing video from camera or on the screen in cs5, perfect hd picture, but when I export to DVD, i see in the media encoder if I choose mpeg2-DVD it goes output to 720x480, how do I export to dvd for the best HD seetings for DVD to get a HD playback on the DVD, now I see an OK video on the TV playback, but not the same as the original recording, can anyone help,, thanks in advance for any help.....

I found (via a friend who is experienced in Pr & En) that it all comes down to the export/authoring settings.
In Pr, my export settings needed to be adjusted as follows:
Format: MPEG2-DVD
Preset: PAL Progressive Widescreen High Quality
Selected 'DVD' in the Basic Settings section of the
Multiplexer tab (this creates a single mpeg file rather than a m2v file which has a separate video and audio file)
Selected the highest possible quality (5) in the Basic Video Settings section of the Video tab, changed the TV Standard to PAL (to suit Australian TVs) and then
Set the minimum/target/maximum bitrate settings to 8Mbps (when I set it at 9Mbps, the final file had too high a bitrate for DVD)
In the Audio tab, I selected PCM as the audio type.
I also ensured that the Use Maximum Render Quality checkbox was ticked at the bottom of the export settings window.
Then I exported.
Once encoding was complete I opened Encore, started a new project, selected DVD as the authoring mode and PAL as the Television Standard within the Basic settings for the new project. I then imported the final mpeg file as a timeline into Encore, set all the appropriate first play/title button/end play functions as necessary, then I opened the Edit Quality Presets window from the File menu and made the following settings;
Format: MPEG2-DVD
Presets: PAL DV High quality 8Mb CBR 1 Pass
Basic Video Settings - Quality: set to maximum (5)
Basic Video Settings - Field Order: None (Progressive)
Basic Video Settings - Pixel Aspect Ratio: Widescreen 16:9
Basic Video Settings - Bitrate Settings - Bitrate [Mbps]: set to maximum (9)
Basic Audio Settings - Audio Format Settings: Audio Format: PCM
click OK
Then I authored the DVD and was quite pleased with the result. Still not quite to the quality I was hoping for (i.e. the quality of a DVD movie), but still a significant improvement on my initial attempts using default Pr & En settings.
Hope it helps

Best settings for DVD project

I have done all of my work so far for online projects so I didn't realise that dvd always has dimensions of 720x576, and that it is only blueray which plays in full HD, until I started building a DVD project in Encore.
I would like some advice to produce the best possible results on a dvd format;
I presume that this means I must build all my menus in photoshop to 720x576 dimensions?
But what about the video itself? It was filmed in 1920x1080, and was created on a 1920x1080 timeline in Premiere Pro, can I simply export it at as an SD file?
What I'm asking really is how should I export my project from Premiere, and build it in Encore for best possible results for DVD format?
Thanks in advance

If you want the best conversion this method is regarded as one of the best,
Bellune Digital Video Services - Tutorials - hd2sd - High Quality Scaling From HD to SD
I'm sure there are topics about this in this forum but I couldn't search and find them.
If your HD material has a lot of fine detail that might strobe try adding a Gaussian blur to your HD export, I find a setting of 3 to 4 vertical helps.

Best compressor settings for DVCPRO50 footage for DVD

Similar Messages

Maybe you are looking for