Best format for importing scanned photos into FCP in HDV?

Hi,
I'm importing a lot of scanned photos into FCP, for an HDV project. I will be zooming into these images, panning, and so on.
What is the consensus on the best format to use? I was thinking TIFF but then reading about PNG I am thinking this is perhaps better.
I am dealing with large (up to 1200 dpi) image files, so size is an issue.
Many thanks for your thoughts.

Right, use a PSD with photos on different layers, Import the one document into FCP, each photo is on a different layer in FCP and you can zoom in as you wish by using key frames, once you set all your photos (Layers) the way you want all the same or different etc... you copy and paste them into the time line. I do this all the time and add transitions or effects. works well even with company logos off of a web site. You can zoom in all you want. dude
from a link you provided
PSD
Increasingly then image editability is becoming important. The obvious way of maintaining maximum information and maximum editability is to stick with the native application-specific format. Of course it was to avoid this go-it-alone anarchy that file format standards had to be developed in the first place, but the situation with bitmap images is quite special. Currently the vast majority of designers are working on their images in Photoshop and then exporting them to TIFF to use in their DTP application. Why not just cut out the middleman and support the industry standard Photoshop’s PSD format directly?
After all the format is well known. The core format PSD 3.0 format is built on a short header specifying the image size and colour channels and then three information sections called the Colour Mode Data Block, Image Resources Block and Layer and Mask Information Block defining features such as duotone settings, channels and paths and layer opacity and blend mode respectively. After that comes the image data. Naturally the PSD format can support all the advanced features we’ve already looked at such as duotones, clipping paths and channels but it also offers one feature that no other file format does. While every other format must be flattened on export, PSD is the only format that supports layers. Any program that supports PSDs directly can then leverage this layer information as Adobe ImageReady and Deneba Canvas show. Currently the DTP support is fairly basic but the possibility of changing image blend modes or editing layer text or tweaking adjustment layers depending on the actual spread in which the image appears is creatively mouthwatering.

Similar Messages

  • Problem with importing scanned photos into iPhoto

    I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
    Can anybody help?
    Many thanks in advance for any assistance.
    Sir Leicester

    Did you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
    Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
    OT

  • Best way for importing a PDF into FCE please

    Hi there friends,
    Can someone advise me the best was to import/work with a PDF I would like to bring into a FCE edit...
    Regards,
    Chris

    Hi -
    *If it is an unlocked PDF*, open it in the app "Preview", use the selection tool to select the area you want to show in FCE, type Command + C to copy it, and go to the menu File > New from clipboard and your selection will open in a new document.
    Go to the menu File > Save As, choose Format PNG and a Resolution of 72 pix or lower and name and save it.
    Then Open FCE and either drag the file to your browser or go to the menu File > Import > Files and navigate to the image you just made and click OK.
    Hope this helps.
    MtD

  • Best format for saving & resizing  photo with transparent background

    I have some product shots where I cut out the background, so the background is now transparent. What is the best format to save these in to preserve the transparency and also resize the photo in the future? I seem to remember from long ago that Tiffs don't resize easily? but when I saved the shot as Eps I couldn't find a way to preserve the transparency. These are for a client who wants to send these shots to various publications for ads, so I need something they can resize. Thanks for your help!

    Transparency is only saved in EPS files with an embedded clipping path. EPS files limit you to 1-bit transparecy, meaning you either show a portion of the image or you don't. This kind of transparency means hard edges around your subject.
    If you use PSD,PDF,PDP files, you can offer a soft transition from opaque to transparent in as many as 256 steps. If you have already removed the background in your layered file, then this would be the way to go. The latest releases of QuarkXPress and all releases of InDesign support PSD.

  • HT1473 What is the best format to import CD's into Itunes?

    I'm loading my CD collection into Itunes. What is the optimum format to import them in?

    New Ruling Confirms Copying DVDs is Illegal - AVS Forum
    Man gets jail time for illegally copying DVDs - Baltimore Sun
    Apparently, DVD Copying Software Is Illegal - Gizmodo
    Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
    Judge rules that DVD copying software is illegal | Technology ...
    Copying DVDs and Modding Game Consoles Still Illegal, Copyright ...
    MPAA Says Making Even "One Copy" of a DVD is Illegal
    US Court Rules Consumers Never Have the Right to Copy DVD
    Court Rules Copying DVD now Illegal. - SatelliteGuys
    DVD copying software is illegal under DMCA, says Judge - Geek.com

  • Best format for importing slides from InDesign

    I have a slideshow presentation that I created with InDesign CS. I am now creating a project in iMovie using video taped footage of this presentation. At certain points, I would like to cut away to the slide which is being discussed. What is the best format/method to do this?
    I tried exporting the slides as pdfs, but in addition to the slides being blurry (both on screen and after I burnt the presentation to DVD), I could not control how long the slide remained on screen, nor adjust its dimensions.
    I also tried to convert the slides to jpg and tif and gif (even png) files and, no matter what the quality, they were also blurry.
    Any suggestions would be greatly appreciated.
    Thanks.
    eMac Mac OS X (10.3.9)

    Hi marmino:
    Welcome to discussions!
    You could try saving the slides as 640X480 and then as a .pict file.
    Sue

  • Importing scanned photos into IPhoto

    I scanned a lot of old black and white photos and they are sitting in finder. I am trying to import them into IPhoto and they can't. It says that it is an unreadable file and could not be formatted because it is an unrecognized format. What am I do wrong????

    iPhoto only works with RGB photos - sRGB is the best
    you can use Preview to change the color profile or search Old Toad's posts for a link to his automator script to do them in batches
    LN

  • Best format for Importing video?

    When I create a new event in Imovie and import video it will give me two options, "Large 960x540" (which says it will "reduce image size with little quality loss") or "Full" (which says "selecting full on this computer may result in degraged video playback").
    Here is my dilemma.
    I would think Full would give me the best image quality when I create a "project" and export it.  So I tested it.  I imported the same 15 sec clip with both options.  The clips were shot from my Iphone 4s.  I put both clips in the same "project". So my project is 15 seconds of "Full" video followed by 15 seconds of the same footage in "large" format.  I "finalized" the project and then exported it to my desktop.  I actually did it two ways, one was at 720p and one was at 1080p. 
    When I watch the video, it actually looks like the second half of the "project" is slightly crisper/clearer which is the part of the "project" that came from the "Large" import not the "Full" import.
    Is that possible or are my eyes playing tricks on me?  I am viewing it with QTplayer and utilizing my full screen of my computer which is a 13" MBP.  Should the section of the video from the "Large" import look better than the "full" or vice versa?
    Thanks,
    Ehren

    QuickTimeKirk,
    We posted our responses about the same time.
    I agree with what you're saying but he did ask for the best possible quality.
    I imagine with all the reencoding between the formats the video isn't going to look that great.
    As a side note, given the above scenario I've seen better quality video acquired, when the DVD Players output is connected straight to a mini DV camcorder and imported into iMovie.
    That's just my experience when converting video of questionable quality to begin with.
    I don't know how important it is to get the best quality but, there is a program called Cinematize that guarantes no loss in quality during the conversion process (never used it though).
    Cinematize 2 for Macintosh $60.00
    Cinematize 2 Pro for Macintosh $130.00
    15 day free trail
    http://www.miraizon.com/index.html

  • Best format for importing AVCHD (.mts) files?

    After reading a lot of these archives and being a very new Mac user, I think I understand what I have to do here. I have an HD camcorder that records in .mts. I can either directly import from the camera to iMovie (which takes up far too much space) or I can convert the .mts to a different format that takes up lesser space while keeping the original files saved elsewhere.
    What I haven't been able to figure out is, what format is going to be the most space efficient? While I would love to have super great HD quality, these are all home movies and primarily I want to be able to view them, edit/merge clips a little for storage, possibly burn to a DVD. Some quality lost in compression is ok with me. I have handbrake and converted to .mp4, but that still seemed to take up a lot of room...about 450 MB for maybe a 1-2 minute clip. There has got to be a better way, I would imagine, that would store better and also be acceptable to iMovie without translating into AIC codec (which I know takes a lot of room). Any thoughts? I am open to other third party conversion tools. I also can use Final Cut Pro if there is a compressed file FCP uses that will be smaller and better.
    Thanks!!

    So, I've been playing around with things. I used handbrake to convert the .m2ts into .m4v, and when I unclicked "optimize file", the file stayed at around 32 MB, and the original .m2ts was 27 MB. I also used a VoltaicHD trial to convert (it converted to .mov), and it was 107MB. The quality in iMovie was not too different to my eye, and it looks like the different is 1920x1080 vs 1440x816.
    For home movie quality type stuff (and provided I keep original files in the event I ever want to use them), is the handbrake method going to be the smallest I can get? It seems pretty good to me, an extra few MB isn't a big deal...just not sure if I'm totally missing something here. It seems like the .m4v isn't being converted to the AIC, whereas the .mov is. Handbrake is a pain b/c it doesn't seem like I can click on multiple files at once to add to queue, but to save all that space it seems worth it. Tried MPEG streamclip and it doesn't convert .m2ts. Just want to make sure I'm not missing something, because that's a huge difference in storage space.

  • The best format for import to AE?

    I am working on a music video shot in AVCHD (60i). I need to export some shots to AE for compositing. In the old SD days, I would export as Quicktime using the Animation codec. But nowadays, with HD, these files are 6GB or more in size when rendered, and they are hard to work with on my system.
    I am wondering what would be a good format/codec to use to export clips from Premiere for use in AE. Keep in mind, I want to retain as much quality as possible, but still be able to work with the files comfortably.
    Any suggestions would be greatly appreciated!
    Thanks all.

    I find the Dynamic Link option to be slow on my system
    You can always render inside of PP to get smoother playback during editing.
    what other format might you recommend to get that combination of immaculate compression and reasonable size
    On the PC, both Lagarith and UT codecs are free and lossless*.  Both work inside of PP.  As you're using these only for previewing purposes, a codecs status as an "industry standard" is irrelevant.
    *Take note than neither ProRes nor DNxHD are lossless.

  • Best Practices for importing FrameMaker books into RoboHelp?

    We are getting ready to purchase RobHelp, and I'm trying to get a head start on the conversion.  We have ~600 base FrameMaker (v7) files that are pieced together to create ~11 different manuals.  I've got a couple of simpler books picked out for testing purposes, but if there's a white paper or anyting on the subject floating about, I would appreciate it.

    I've tried to use RH8 to produce HTML help from a FM9 book. I found that it mostly worked as advertised, with the exception of automatic TOC generation from a book TOC (which can be worked around) and disappearing HTML tags when conditional text is used (no work around found yet). I've posted about both of these issues in this forum, and while many have read my posts, no-one has yet acknowledged that they have seen similar problems or pointed out incorrect usage on my part. So I might just be mad (or furious, depending).
    Before purchasing and committing to an approach, I recommend that you use the 30 day eval to thoroughly exercise these products and see if they work as advertised for you. If you need more than FM9 and RH8 (which can be downloaded as full-featured trials), then you can get a DVD of a 30 day trial of TCS2 from Adobe. I ordered the DVD and it arrived in about 3-5 days (at least, it did for me, and I'm in the USA).
    -Adam

  • Trouble importing scanned photos in pse8

    I'm having trouble importing scanned photos into pse8.  I'm using pse8 on a mac with ver 10.5.8 os.  The scanner is a lexmark s405.  This is the message I get:  "This file was created to be viewed on a television screen, but will appear compressed on your computer monitor.  It is recommended that you use a video monitor to priview and edit this image."  The photos do look normal on my screen, but the file sizes are huge, as in about 1 px per inch.  Can anyone point me in the right direction for a remedy?

    hi miss....
    even though m a Nikon guy :>   Canon makes one of the best scanner components around.  they used to make alot of the scanner parts for other companies under the other company names.
    remember though, that if u buy an all-in-one u might be waiting for repairs for different functions of the combos.  (scanners, printers, faxs, ect.)
    as cheap as they are getting  ????
    good luck
    david :>

  • Line Drawing best file format for import in InDesign

    i was wondering what is  the accepted and recommended file format for files to be imported in InDesign. I was under the impression that AI files should be saved as EPS but I just read an article that says that Adobe's Dov  Isaacs said that eps will be shortly obsolete.What should I do. I work on curriculum that contains both photographs and line drawing and we use tiff for the former and eps for the latter. Most of our line drawing is done in AI. Howeverwe have a cartoonist that sends us files in jpg format. What would be the best file format for him and for us as we draw in AI?
    Article link: http://www.prepressure.com/library/file-formats/eps
    The future of the EPS file format
    EPS is rapidly becoming an outdated file format which is being  replaced by PDF just like PostScript itself is also being phased out and  replaced by PDF. Don’t just take my word on this. Here is what Dov  Isaacs from Adobe said in a discussion on a PrintPlanet forum about the  future of PostScript: “ …Adobe will continue to support EPS as a  legacy graphics format for import of non-color managed, opaque graphical  data into Adobe applications (such as InDesign and Illustrator).  Although we certain do not recommend that new graphical content be  stored in EPS format (except to satisfy the need to import data into  page layout programs that aren’t quite PDF-centric — no need to mention  names here!), our user base should feel comfortable that there is no  need to worry about a need to convert their very sizable libraries of  EPS-based graphic assets.”

    Yes, I drag the AI file in.
    If after it's in place I need to change I can just right click and chose edit original make the changes and save and the illustration in inDesign will reflect the changes.
    On the other hand I can make changes to the original and all iterations of the file will automatically update, say if I used the illustration in several documents.
    As an example I had completed a set of documents for a new company, i.e., biz cards, brochures, product labeling, stationery, etc. and in their wisdom they decided to make changes in their logo, which, of course, is on everything. I opened the AI file with the logo made the changes saved and all the documents then reflected the changes. The only caveat to do this seamlessly is to make sure that your file logo size is the same as the original or you might have to tweak placement in the other documents
    It is this interoperability that to me makes the Creative Suite so much more than the sum of their parts.
    Craig

  • Best Method For Importing Clips Between FCP Projects

    What is the best method for importing clips between FCP 7.0.3 projects?  I am wondering whether or not pulling the clips from the Capture Scratch folder is the way to go or will using Import from the new FCP project create a new folder in Capture Scratch with the imported clips?  I have a new HD camcorder with different clips for different projects and Log and Transfer makes it so easy to bring them all in at once but now wondering how best to separate them into separate Capture Scratch folders for each project. 

    well, I simply either drag them in to the new/different project from the finder, or drag or copy and paste between open fcp projects.  Never had any problems working this way.  Just remember that if you delete a specific project scratch disk folder, you may be deleting media used in another project.

  • What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

    What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

    This question is largely answered by the following thread...
    https://discussions.apple.com/message/17805700#17805700

Maybe you are looking for